From a7c3a4f986dd2becca5fa11dd7e6eba81b596d06 Mon Sep 17 00:00:00 2001 From: Damien Hedde Date: Thu, 30 Jan 2020 16:02:04 +0000 Subject: hw/core/qdev: handle parent bus change regarding resettable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In qdev_set_parent_bus(), when changing the parent bus of a realized device, if the source and destination buses are not in the same reset state, some adaptations are required. This patch adds needed call to resettable_change_parent() to make sure a device reset state stays coherent with its parent bus. The addition is a no-op if: 1. the device being parented is not realized. 2. the device is realized, but both buses are not under reset. Case 2 means that as long as qdev_set_parent_bus() is called during the machine realization procedure (which is before the machine reset so nothing is in reset), it is a no op. There are 52 call sites of qdev_set_parent_bus(). All but one fall into the no-op case: + 29 trivial calls related to virtio (in hw/{s390x,display,virtio}/ {vhost,virtio}-xxx.c) to set a vdev(or vgpu) composing device parent bus just before realizing the same vdev(vgpu). + hw/core/qdev.c: when creating a device in qdev_try_create() + hw/core/sysbus.c: when initializing a device in the sysbus + hw/i386/amd_iommu.c: before realizing AMDVIState/pci + hw/isa/piix4.c: before realizing PIIX4State/rtc + hw/misc/auxbus.c: when creating an AUXBus + hw/misc/auxbus.c: when creating an AUXBus child + hw/misc/macio/macio.c: when initializing a MACIOState child + hw/misc/macio/macio.c: before realizing NewWorldMacIOState/pmu + hw/misc/macio/macio.c: before realizing NewWorldMacIOState/cuda + hw/net/virtio-net.c: Used for migration when using the failover mechanism to migration a vfio-pci/net. It is a no-op because at this point the device is already on the bus. + hw/pci-host/designware.c: before realizing DesignwarePCIEHost/root + hw/pci-host/gpex.c: before realizing GPEXHost/root + hw/pci-host/prep.c: when initialiazing PREPPCIState/pci_dev + hw/pci-host/q35.c: before realizing Q35PCIHost/mch + hw/pci-host/versatile.c: when initializing PCIVPBState/pci_dev + hw/pci-host/xilinx-pcie.c: before realizing XilinxPCIEHost/root + hw/s390x/event-facility.c: when creating SCLPEventFacility/ TYPE_SCLP_QUIESCE + hw/s390x/event-facility.c: ditto with SCLPEventFacility/ TYPE_SCLP_CPU_HOTPLUG + hw/s390x/sclp.c: Not trivial because it is called on a SLCPDevice just after realizing it. Ok because at this point the destination bus (sysbus) is not in reset; the realize step is before the machine reset. + hw/sd/core.c: Not OK. Used in sdbus_reparent_card(). See below. + hw/ssi/ssi.c: Used to put spi slave on spi bus and connect the cs line in ssi_auto_connect_slave(). Ok because this function is only used in realize step in hw/ssi/aspeed_smc.ci, hw/ssi/imx_spi.c, hw/ssi/mss-spi.c, hw/ssi/xilinx_spi.c and hw/ssi/xilinx_spips.c. + hw/xen/xen-legacy-backend.c: when creating a XenLegacyDevice device + qdev-monitor.c: in device hotplug creation procedure before realize Note that this commit alone will have no effect, right now there is no use of resettable API to reset anything. So a bus will never be tagged as in-reset by this same API. The one place where side-effect will occurs is in hw/sd/core.c in sdbus_reparent_card(). This function is only used in the raspi machines, including during the sysbus reset procedure. This case will be carrefully handled when doing the multiple phase reset transition. Signed-off-by: Damien Hedde Reviewed-by: Peter Maydell Reviewed-by: Richard Henderson Tested-by: Philippe Mathieu-Daudé Message-id: 20200123132823.1117486-7-damien.hedde@greensocs.com Signed-off-by: Peter Maydell --- hw/core/qdev.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/hw/core/qdev.c b/hw/core/qdev.c index b2affd8f92..28fc93b107 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -96,25 +96,31 @@ static void bus_add_child(BusState *bus, DeviceState *child) void qdev_set_parent_bus(DeviceState *dev, BusState *bus) { - bool replugging = dev->parent_bus != NULL; + BusState *old_parent_bus = dev->parent_bus; - if (replugging) { + if (old_parent_bus) { trace_qdev_update_parent_bus(dev, object_get_typename(OBJECT(dev)), - dev->parent_bus, object_get_typename(OBJECT(dev->parent_bus)), + old_parent_bus, object_get_typename(OBJECT(old_parent_bus)), OBJECT(bus), object_get_typename(OBJECT(bus))); /* * Keep a reference to the device while it's not plugged into * any bus, to avoid it potentially evaporating when it is * dereffed in bus_remove_child(). + * Also keep the ref of the parent bus until the end, so that + * we can safely call resettable_change_parent() below. */ object_ref(OBJECT(dev)); bus_remove_child(dev->parent_bus, dev); - object_unref(OBJECT(dev->parent_bus)); } dev->parent_bus = bus; object_ref(OBJECT(bus)); bus_add_child(bus, dev); - if (replugging) { + if (dev->realized) { + resettable_change_parent(OBJECT(dev), OBJECT(bus), + OBJECT(old_parent_bus)); + } + if (old_parent_bus) { + object_unref(OBJECT(old_parent_bus)); object_unref(OBJECT(dev)); } } -- cgit v1.2.3