From 0e404da00737eaa69204e7f3446b85b57d397e4a Mon Sep 17 00:00:00 2001 From: Anup Patel Date: Wed, 22 Jan 2020 13:17:23 +0000 Subject: riscv/virt: Add syscon reboot and poweroff DT nodes The SiFive test device found on virt machine can be used by generic syscon reboot and poweroff drivers available in Linux kernel. This patch updates FDT generation in virt machine so that Linux kernel can probe and use generic syscon drivers. Signed-off-by: Anup Patel Reviewed-by: Palmer Dabbelt Signed-off-by: Palmer Dabbelt --- hw/riscv/virt.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index c44b865959..6d682f8a78 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -182,11 +182,10 @@ static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, uint64_t mem_size, const char *cmdline) { void *fdt; - int cpu; + int cpu, i; uint32_t *cells; char *nodename; - uint32_t plic_phandle, phandle = 1; - int i; + uint32_t plic_phandle, test_phandle, phandle = 1; hwaddr flashsize = virt_memmap[VIRT_FLASH].size / 2; hwaddr flashbase = virt_memmap[VIRT_FLASH].base; @@ -356,16 +355,35 @@ static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, create_pcie_irq_map(fdt, nodename, plic_phandle); g_free(nodename); + test_phandle = phandle++; nodename = g_strdup_printf("/test@%lx", (long)memmap[VIRT_TEST].base); qemu_fdt_add_subnode(fdt, nodename); { - const char compat[] = "sifive,test1\0sifive,test0"; + const char compat[] = "sifive,test1\0sifive,test0\0syscon"; qemu_fdt_setprop(fdt, nodename, "compatible", compat, sizeof(compat)); } qemu_fdt_setprop_cells(fdt, nodename, "reg", 0x0, memmap[VIRT_TEST].base, 0x0, memmap[VIRT_TEST].size); + qemu_fdt_setprop_cell(fdt, nodename, "phandle", test_phandle); + test_phandle = qemu_fdt_get_phandle(fdt, nodename); + g_free(nodename); + + nodename = g_strdup_printf("/reboot"); + qemu_fdt_add_subnode(fdt, nodename); + qemu_fdt_setprop_string(fdt, nodename, "compatible", "syscon-reboot"); + qemu_fdt_setprop_cell(fdt, nodename, "regmap", test_phandle); + qemu_fdt_setprop_cell(fdt, nodename, "offset", 0x0); + qemu_fdt_setprop_cell(fdt, nodename, "value", FINISHER_RESET); + g_free(nodename); + + nodename = g_strdup_printf("/poweroff"); + qemu_fdt_add_subnode(fdt, nodename); + qemu_fdt_setprop_string(fdt, nodename, "compatible", "syscon-poweroff"); + qemu_fdt_setprop_cell(fdt, nodename, "regmap", test_phandle); + qemu_fdt_setprop_cell(fdt, nodename, "offset", 0x0); + qemu_fdt_setprop_cell(fdt, nodename, "value", FINISHER_PASS); g_free(nodename); nodename = g_strdup_printf("/uart@%lx", -- cgit v1.2.3 From ae4a70c07196b76a67b772318b714ce910e10004 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 28 Jan 2020 15:32:16 -0800 Subject: riscv: Separate FPU register size from core register size in gdbstub [v2] The size of the FPU registers is dictated by the 'f' and 'd' features, not the core processor register size. Processors with the 'd' feature have 64-bit FPU registers. Processors without the 'd' feature but with the 'f' feature have 32-bit FPU registers. Signed-off-by: Keith Packard [Palmer: This requires manually triggering a rebuild of riscv32-softmmu/gdbstub-xml.c] Signed-off-by: Palmer Dabbelt --- configure | 4 ++-- target/riscv/gdbstub.c | 20 +++++++++++--------- 2 files changed, 13 insertions(+), 11 deletions(-) diff --git a/configure b/configure index 115dc38085..d1b9e75676 100755 --- a/configure +++ b/configure @@ -7736,13 +7736,13 @@ case "$target_name" in TARGET_BASE_ARCH=riscv TARGET_ABI_DIR=riscv mttcg=yes - gdb_xml_files="riscv-32bit-cpu.xml riscv-32bit-fpu.xml riscv-32bit-csr.xml riscv-32bit-virtual.xml" + gdb_xml_files="riscv-32bit-cpu.xml riscv-32bit-fpu.xml riscv-64bit-fpu.xml riscv-32bit-csr.xml riscv-32bit-virtual.xml" ;; riscv64) TARGET_BASE_ARCH=riscv TARGET_ABI_DIR=riscv mttcg=yes - gdb_xml_files="riscv-64bit-cpu.xml riscv-64bit-fpu.xml riscv-64bit-csr.xml riscv-64bit-virtual.xml" + gdb_xml_files="riscv-64bit-cpu.xml riscv-32bit-fpu.xml riscv-64bit-fpu.xml riscv-64bit-csr.xml riscv-64bit-virtual.xml" ;; sh4|sh4eb) TARGET_ARCH=sh4 diff --git a/target/riscv/gdbstub.c b/target/riscv/gdbstub.c index 1a7947e019..1a72f7be9c 100644 --- a/target/riscv/gdbstub.c +++ b/target/riscv/gdbstub.c @@ -303,7 +303,12 @@ int riscv_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n) static int riscv_gdb_get_fpu(CPURISCVState *env, uint8_t *mem_buf, int n) { if (n < 32) { - return gdb_get_reg64(mem_buf, env->fpr[n]); + if (env->misa & RVD) { + return gdb_get_reg64(mem_buf, env->fpr[n]); + } + if (env->misa & RVF) { + return gdb_get_reg32(mem_buf, env->fpr[n]); + } /* there is hole between ft11 and fflags in fpu.xml */ } else if (n < 36 && n > 32) { target_ulong val = 0; @@ -403,23 +408,20 @@ void riscv_cpu_register_gdb_regs_for_features(CPUState *cs) { RISCVCPU *cpu = RISCV_CPU(cs); CPURISCVState *env = &cpu->env; -#if defined(TARGET_RISCV32) - if (env->misa & RVF) { + if (env->misa & RVD) { + gdb_register_coprocessor(cs, riscv_gdb_get_fpu, riscv_gdb_set_fpu, + 36, "riscv-64bit-fpu.xml", 0); + } else if (env->misa & RVF) { gdb_register_coprocessor(cs, riscv_gdb_get_fpu, riscv_gdb_set_fpu, 36, "riscv-32bit-fpu.xml", 0); } - +#if defined(TARGET_RISCV32) gdb_register_coprocessor(cs, riscv_gdb_get_csr, riscv_gdb_set_csr, 240, "riscv-32bit-csr.xml", 0); gdb_register_coprocessor(cs, riscv_gdb_get_virtual, riscv_gdb_set_virtual, 1, "riscv-32bit-virtual.xml", 0); #elif defined(TARGET_RISCV64) - if (env->misa & RVF) { - gdb_register_coprocessor(cs, riscv_gdb_get_fpu, riscv_gdb_set_fpu, - 36, "riscv-64bit-fpu.xml", 0); - } - gdb_register_coprocessor(cs, riscv_gdb_get_csr, riscv_gdb_set_csr, 240, "riscv-64bit-csr.xml", 0); -- cgit v1.2.3 From 9a5b40b84279d60c0d93e5bb174fc9b49f901c91 Mon Sep 17 00:00:00 2001 From: Anup Patel Date: Wed, 6 Nov 2019 11:56:36 +0000 Subject: hw: rtc: Add Goldfish RTC device This patch adds model for Google Goldfish virtual platform RTC device. We will be adding Goldfish RTC device to the QEMU RISC-V virt machine for providing real date-time to Guest Linux. The corresponding Linux driver for Goldfish RTC device is already available in upstream Linux. For now, VM migration support is available but untested for Goldfish RTC device. It will be hardened in-future when we implement VM migration for KVM RISC-V. Signed-off-by: Anup Patel Reviewed-by: Alistair Francis Signed-off-by: Palmer Dabbelt --- hw/rtc/Kconfig | 3 + hw/rtc/Makefile.objs | 1 + hw/rtc/goldfish_rtc.c | 285 ++++++++++++++++++++++++++++++++++++++++++ hw/rtc/trace-events | 4 + include/hw/rtc/goldfish_rtc.h | 46 +++++++ 5 files changed, 339 insertions(+) create mode 100644 hw/rtc/goldfish_rtc.c create mode 100644 include/hw/rtc/goldfish_rtc.h diff --git a/hw/rtc/Kconfig b/hw/rtc/Kconfig index 3dc2dd6888..f06e133b8a 100644 --- a/hw/rtc/Kconfig +++ b/hw/rtc/Kconfig @@ -22,3 +22,6 @@ config MC146818RTC config SUN4V_RTC bool + +config GOLDFISH_RTC + bool diff --git a/hw/rtc/Makefile.objs b/hw/rtc/Makefile.objs index 8dc9fcd3a9..aa208d0d10 100644 --- a/hw/rtc/Makefile.objs +++ b/hw/rtc/Makefile.objs @@ -11,3 +11,4 @@ common-obj-$(CONFIG_EXYNOS4) += exynos4210_rtc.o obj-$(CONFIG_MC146818RTC) += mc146818rtc.o common-obj-$(CONFIG_SUN4V_RTC) += sun4v-rtc.o common-obj-$(CONFIG_ASPEED_SOC) += aspeed_rtc.o +common-obj-$(CONFIG_GOLDFISH_RTC) += goldfish_rtc.o diff --git a/hw/rtc/goldfish_rtc.c b/hw/rtc/goldfish_rtc.c new file mode 100644 index 0000000000..01e9d2b083 --- /dev/null +++ b/hw/rtc/goldfish_rtc.c @@ -0,0 +1,285 @@ +/* + * Goldfish virtual platform RTC + * + * Copyright (C) 2019 Western Digital Corporation or its affiliates. + * + * For more details on Google Goldfish virtual platform refer: + * https://android.googlesource.com/platform/external/qemu/+/refs/heads/emu-2.0-release/docs/GOLDFISH-VIRTUAL-HARDWARE.TXT + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include "qemu/osdep.h" +#include "qemu-common.h" +#include "hw/rtc/goldfish_rtc.h" +#include "migration/vmstate.h" +#include "hw/irq.h" +#include "hw/qdev-properties.h" +#include "hw/sysbus.h" +#include "qemu/bitops.h" +#include "qemu/timer.h" +#include "sysemu/sysemu.h" +#include "qemu/cutils.h" +#include "qemu/log.h" + +#include "trace.h" + +#define RTC_TIME_LOW 0x00 +#define RTC_TIME_HIGH 0x04 +#define RTC_ALARM_LOW 0x08 +#define RTC_ALARM_HIGH 0x0c +#define RTC_IRQ_ENABLED 0x10 +#define RTC_CLEAR_ALARM 0x14 +#define RTC_ALARM_STATUS 0x18 +#define RTC_CLEAR_INTERRUPT 0x1c + +static void goldfish_rtc_update(GoldfishRTCState *s) +{ + qemu_set_irq(s->irq, (s->irq_pending & s->irq_enabled) ? 1 : 0); +} + +static void goldfish_rtc_interrupt(void *opaque) +{ + GoldfishRTCState *s = (GoldfishRTCState *)opaque; + + s->alarm_running = 0; + s->irq_pending = 1; + goldfish_rtc_update(s); +} + +static uint64_t goldfish_rtc_get_count(GoldfishRTCState *s) +{ + return s->tick_offset + (uint64_t)qemu_clock_get_ns(rtc_clock); +} + +static void goldfish_rtc_clear_alarm(GoldfishRTCState *s) +{ + timer_del(s->timer); + s->alarm_running = 0; +} + +static void goldfish_rtc_set_alarm(GoldfishRTCState *s) +{ + uint64_t ticks = goldfish_rtc_get_count(s); + uint64_t event = s->alarm_next; + + if (event <= ticks) { + goldfish_rtc_clear_alarm(s); + goldfish_rtc_interrupt(s); + } else { + /* + * We should be setting timer expiry to: + * qemu_clock_get_ns(rtc_clock) + (event - ticks) + * but this is equivalent to: + * event - s->tick_offset + */ + timer_mod(s->timer, event - s->tick_offset); + s->alarm_running = 1; + } +} + +static uint64_t goldfish_rtc_read(void *opaque, hwaddr offset, + unsigned size) +{ + GoldfishRTCState *s = opaque; + uint64_t r = 0; + + switch (offset) { + case RTC_TIME_LOW: + r = goldfish_rtc_get_count(s) & 0xffffffff; + break; + case RTC_TIME_HIGH: + r = goldfish_rtc_get_count(s) >> 32; + break; + case RTC_ALARM_LOW: + r = s->alarm_next & 0xffffffff; + break; + case RTC_ALARM_HIGH: + r = s->alarm_next >> 32; + break; + case RTC_IRQ_ENABLED: + r = s->irq_enabled; + break; + case RTC_ALARM_STATUS: + r = s->alarm_running; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: offset 0x%x is UNIMP.\n", __func__, (uint32_t)offset); + break; + } + + trace_goldfish_rtc_read(offset, r); + + return r; +} + +static void goldfish_rtc_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + GoldfishRTCState *s = opaque; + uint64_t current_tick, new_tick; + + switch (offset) { + case RTC_TIME_LOW: + current_tick = goldfish_rtc_get_count(s); + new_tick = deposit64(current_tick, 0, 32, value); + s->tick_offset += new_tick - current_tick; + break; + case RTC_TIME_HIGH: + current_tick = goldfish_rtc_get_count(s); + new_tick = deposit64(current_tick, 32, 32, value); + s->tick_offset += new_tick - current_tick; + break; + case RTC_ALARM_LOW: + s->alarm_next = deposit64(s->alarm_next, 0, 32, value); + goldfish_rtc_set_alarm(s); + break; + case RTC_ALARM_HIGH: + s->alarm_next = deposit64(s->alarm_next, 32, 32, value); + break; + case RTC_IRQ_ENABLED: + s->irq_enabled = (uint32_t)(value & 0x1); + goldfish_rtc_update(s); + break; + case RTC_CLEAR_ALARM: + goldfish_rtc_clear_alarm(s); + break; + case RTC_CLEAR_INTERRUPT: + s->irq_pending = 0; + goldfish_rtc_update(s); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: offset 0x%x is UNIMP.\n", __func__, (uint32_t)offset); + break; + } + + trace_goldfish_rtc_write(offset, value); +} + +static int goldfish_rtc_pre_save(void *opaque) +{ + uint64_t delta; + GoldfishRTCState *s = opaque; + + /* + * We want to migrate this offset, which sounds straightforward. + * Unfortunately, we cannot directly pass tick_offset because + * rtc_clock on destination Host might not be same source Host. + * + * To tackle, this we pass tick_offset relative to vm_clock from + * source Host and make it relative to rtc_clock at destination Host. + */ + delta = qemu_clock_get_ns(rtc_clock) - + qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + s->tick_offset_vmstate = s->tick_offset + delta; + + return 0; +} + +static int goldfish_rtc_post_load(void *opaque, int version_id) +{ + uint64_t delta; + GoldfishRTCState *s = opaque; + + /* + * We extract tick_offset from tick_offset_vmstate by doing + * reverse math compared to pre_save() function. + */ + delta = qemu_clock_get_ns(rtc_clock) - + qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + s->tick_offset = s->tick_offset_vmstate - delta; + + return 0; +} + +static const MemoryRegionOps goldfish_rtc_ops = { + .read = goldfish_rtc_read, + .write = goldfish_rtc_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4 + } +}; + +static const VMStateDescription goldfish_rtc_vmstate = { + .name = TYPE_GOLDFISH_RTC, + .version_id = 1, + .pre_save = goldfish_rtc_pre_save, + .post_load = goldfish_rtc_post_load, + .fields = (VMStateField[]) { + VMSTATE_UINT64(tick_offset_vmstate, GoldfishRTCState), + VMSTATE_UINT64(alarm_next, GoldfishRTCState), + VMSTATE_UINT32(alarm_running, GoldfishRTCState), + VMSTATE_UINT32(irq_pending, GoldfishRTCState), + VMSTATE_UINT32(irq_enabled, GoldfishRTCState), + VMSTATE_END_OF_LIST() + } +}; + +static void goldfish_rtc_reset(DeviceState *dev) +{ + GoldfishRTCState *s = GOLDFISH_RTC(dev); + struct tm tm; + + timer_del(s->timer); + + qemu_get_timedate(&tm, 0); + s->tick_offset = mktimegm(&tm); + s->tick_offset *= NANOSECONDS_PER_SECOND; + s->tick_offset -= qemu_clock_get_ns(rtc_clock); + s->tick_offset_vmstate = 0; + s->alarm_next = 0; + s->alarm_running = 0; + s->irq_pending = 0; + s->irq_enabled = 0; +} + +static void goldfish_rtc_realize(DeviceState *d, Error **errp) +{ + SysBusDevice *dev = SYS_BUS_DEVICE(d); + GoldfishRTCState *s = GOLDFISH_RTC(d); + + memory_region_init_io(&s->iomem, OBJECT(s), &goldfish_rtc_ops, s, + "goldfish_rtc", 0x24); + sysbus_init_mmio(dev, &s->iomem); + + sysbus_init_irq(dev, &s->irq); + + s->timer = timer_new_ns(rtc_clock, goldfish_rtc_interrupt, s); +} + +static void goldfish_rtc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = goldfish_rtc_realize; + dc->reset = goldfish_rtc_reset; + dc->vmsd = &goldfish_rtc_vmstate; +} + +static const TypeInfo goldfish_rtc_info = { + .name = TYPE_GOLDFISH_RTC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(GoldfishRTCState), + .class_init = goldfish_rtc_class_init, +}; + +static void goldfish_rtc_register_types(void) +{ + type_register_static(&goldfish_rtc_info); +} + +type_init(goldfish_rtc_register_types) diff --git a/hw/rtc/trace-events b/hw/rtc/trace-events index 52c1566198..c9894e1747 100644 --- a/hw/rtc/trace-events +++ b/hw/rtc/trace-events @@ -23,3 +23,7 @@ m48txx_nvram_io_read(uint64_t addr, uint64_t value) "io read addr:0x%04" PRIx64 m48txx_nvram_io_write(uint64_t addr, uint64_t value) "io write addr:0x%04" PRIx64 " value:0x%02" PRIx64 m48txx_nvram_mem_read(uint32_t addr, uint32_t value) "mem read addr:0x%04x value:0x%02x" m48txx_nvram_mem_write(uint32_t addr, uint32_t value) "mem write addr:0x%04x value:0x%02x" + +# goldfish_rtc.c +goldfish_rtc_read(uint64_t addr, uint64_t value) "addr 0x%02" PRIx64 " value 0x%08" PRIx64 +goldfish_rtc_write(uint64_t addr, uint64_t value) "addr 0x%02" PRIx64 " value 0x%08" PRIx64 diff --git a/include/hw/rtc/goldfish_rtc.h b/include/hw/rtc/goldfish_rtc.h new file mode 100644 index 0000000000..16f9f9e29d --- /dev/null +++ b/include/hw/rtc/goldfish_rtc.h @@ -0,0 +1,46 @@ +/* + * Goldfish virtual platform RTC + * + * Copyright (C) 2019 Western Digital Corporation or its affiliates. + * + * For more details on Google Goldfish virtual platform refer: + * https://android.googlesource.com/platform/external/qemu/+/master/docs/GOLDFISH-VIRTUAL-HARDWARE.TXT + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#ifndef HW_RTC_GOLDFISH_RTC_H +#define HW_RTC_GOLDFISH_RTC_H + +#include "hw/sysbus.h" + +#define TYPE_GOLDFISH_RTC "goldfish_rtc" +#define GOLDFISH_RTC(obj) \ + OBJECT_CHECK(GoldfishRTCState, (obj), TYPE_GOLDFISH_RTC) + +typedef struct GoldfishRTCState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + QEMUTimer *timer; + qemu_irq irq; + + uint64_t tick_offset; + uint64_t tick_offset_vmstate; + uint64_t alarm_next; + uint32_t alarm_running; + uint32_t irq_pending; + uint32_t irq_enabled; +} GoldfishRTCState; + +#endif -- cgit v1.2.3 From 67b5ef30492b11c2a0f061b47773e45d87109a17 Mon Sep 17 00:00:00 2001 From: Anup Patel Date: Wed, 6 Nov 2019 11:56:43 +0000 Subject: riscv: virt: Use Goldfish RTC device We extend QEMU RISC-V virt machine by adding Goldfish RTC device to it. This will allow Guest Linux to sync it's local date/time with Host date/time via RTC device. Signed-off-by: Anup Patel Reviewed-by: Palmer Dabbelt Acked-by: Palmer Dabbelt Reviewed-by: Alistair Francis Signed-off-by: Palmer Dabbelt --- hw/riscv/Kconfig | 1 + hw/riscv/virt.c | 16 ++++++++++++++++ include/hw/riscv/virt.h | 2 ++ 3 files changed, 19 insertions(+) diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index b12660b9f8..ff9fbe958a 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -34,6 +34,7 @@ config RISCV_VIRT select PCI select HART select SERIAL + select GOLDFISH_RTC select VIRTIO_MMIO select PCI_EXPRESS_GENERIC_BRIDGE select PFLASH_CFI01 diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index 6d682f8a78..7f9e1e5176 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -58,6 +58,7 @@ static const struct MemmapEntry { [VIRT_DEBUG] = { 0x0, 0x100 }, [VIRT_MROM] = { 0x1000, 0x11000 }, [VIRT_TEST] = { 0x100000, 0x1000 }, + [VIRT_RTC] = { 0x101000, 0x1000 }, [VIRT_CLINT] = { 0x2000000, 0x10000 }, [VIRT_PLIC] = { 0xc000000, 0x4000000 }, [VIRT_UART0] = { 0x10000000, 0x100 }, @@ -404,6 +405,18 @@ static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, } g_free(nodename); + nodename = g_strdup_printf("/rtc@%lx", + (long)memmap[VIRT_RTC].base); + qemu_fdt_add_subnode(fdt, nodename); + qemu_fdt_setprop_string(fdt, nodename, "compatible", + "google,goldfish-rtc"); + qemu_fdt_setprop_cells(fdt, nodename, "reg", + 0x0, memmap[VIRT_RTC].base, + 0x0, memmap[VIRT_RTC].size); + qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); + qemu_fdt_setprop_cell(fdt, nodename, "interrupts", RTC_IRQ); + g_free(nodename); + nodename = g_strdup_printf("/flash@%" PRIx64, flashbase); qemu_fdt_add_subnode(s->fdt, nodename); qemu_fdt_setprop_string(s->fdt, nodename, "compatible", "cfi-flash"); @@ -601,6 +614,9 @@ static void riscv_virt_board_init(MachineState *machine) 0, qdev_get_gpio_in(DEVICE(s->plic), UART0_IRQ), 399193, serial_hd(0), DEVICE_LITTLE_ENDIAN); + sysbus_create_simple("goldfish_rtc", memmap[VIRT_RTC].base, + qdev_get_gpio_in(DEVICE(s->plic), RTC_IRQ)); + virt_flash_create(s); for (i = 0; i < ARRAY_SIZE(s->flash); i++) { diff --git a/include/hw/riscv/virt.h b/include/hw/riscv/virt.h index b17048a93a..e69355efaf 100644 --- a/include/hw/riscv/virt.h +++ b/include/hw/riscv/virt.h @@ -44,6 +44,7 @@ enum { VIRT_DEBUG, VIRT_MROM, VIRT_TEST, + VIRT_RTC, VIRT_CLINT, VIRT_PLIC, VIRT_UART0, @@ -57,6 +58,7 @@ enum { enum { UART0_IRQ = 10, + RTC_IRQ = 11, VIRTIO_IRQ = 1, /* 1 to 8 */ VIRTIO_COUNT = 8, PCIE_IRQ = 0x20, /* 32 to 35 */ -- cgit v1.2.3 From 9c8fdcece53e05590441785ab22d91a22da36e29 Mon Sep 17 00:00:00 2001 From: Anup Patel Date: Wed, 6 Nov 2019 11:56:50 +0000 Subject: MAINTAINERS: Add maintainer entry for Goldfish RTC Add myself as Goldfish RTC maintainer until someone else is willing to maintain it. Signed-off-by: Anup Patel Reviewed-by: Alistair Francis Signed-off-by: Palmer Dabbelt --- MAINTAINERS | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index ce46c0a552..43d29ea662 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -562,6 +562,14 @@ F: include/hw/arm/digic.h F: hw/*/digic* F: include/hw/*/digic* +Goldfish RTC +M: Anup Patel +M: Alistair Francis +L: qemu-riscv@nongnu.org +S: Maintained +F: hw/rtc/goldfish_rtc.c +F: include/hw/rtc/goldfish_rtc.h + Gumstix M: Peter Maydell R: Philippe Mathieu-Daudé -- cgit v1.2.3