aboutsummaryrefslogtreecommitdiff
path: root/xen-mapcache.c
AgeCommit message (Collapse)Author
2015-01-20xen: add a lock for the mapcachePaolo Bonzini
Extend the existing dummy mapcache_lock/unlock macros to cover all of xen-mapcache.c. This prepares for unlocked memory access, when parts of exec.c will not be protected by the BQL. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-01-20xen: do not use __-named variables in mapcachePaolo Bonzini
Keep the namespace clean. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2014-07-07xen: build on ARMStefano Stabellini
Collection of fixes to build QEMU with Xen support on ARM: - use xenstore_read_fe_uint64 to retrieve the page-ref (xenfb); - use xen_pfn_t instead of unsigned long in xenfb; - unsigned long/xenpfn_t in xen_remove_from_physmap; - in xen-mapcache.c use HOST_LONG_BITS to check for QEMU's address space size. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2013-04-08hw: move headers to include/Paolo Bonzini
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-03xen-mapcache: pass the right size argument to test_bitsHanweidong
Compute the correct size for test_bits(). qemu_get_ram_ptr() and qemu_safe_ram_ptr() will call xen_map_cache() with size is 0 if the requested address is in the RAM. Then xen_map_cache() will pass the size 0 to test_bits() for checking if the corresponding pfn was mapped in cache. But test_bits() will always return 1 when size is 0 without any bit testing. Actually, for this case, test_bits should check one bit. So this patch introduced a __test_bit_size which is greater than 0 and a multiple of XC_PAGE_SIZE, then test_bits can work correctly with __test_bit_size >> XC_PAGE_SHIFT as its size. Signed-off-by: Zhenguo Wang <wangzhenguo@huawei.com> Signed-off-by: Weidong Han <hanweidong@huawei.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-04-03xen-mapcache: replace last_address_index with a last_entry pointerStefano Stabellini
Replace last_address_index and last_address_vaddr with a single pointer to the last MapCacheEntry used. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2012-12-19softmmu: move include files to include/sysemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-23Rename target_phys_addr_t to hwaddrAvi Kivity
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-22Fix invalidate if memory requested was not bucket alignedFrediano Ziglio
When memory is mapped in qemu_map_cache with lock != 0 a reverse mapping is created pointing to the virtual address of location requested. The cached mapped entry is saved in last_address_vaddr with the memory location of the base virtual address (without bucket offset). However when this entry is invalidated the virtual address saved in the reverse mapping is used. This cause that the mapping is freed but the last_address_vaddr is not reset. Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2012-04-13xen-mapcache: don't unmap locked entry during mapcache invalidationJulien Grall
When an IOREQ_TYPE_INVALIDATE is sent to QEMU, it invalidates all entry of the map cache even if it's locked. QEMU is not able to know that entry was invalidated, so when an IO access is requested a segfault occured. Signed-off-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2012-04-13Xen, mapcache: Fix the compute of the size of bucket.Anthony PERARD
Because the size of a mapping is wrong when there is an offset and a size >= bucket_size. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2012-03-19xen mapcache: check if memory region has moved.Anthony PERARD
This patch changes the xen_map_cache behavior. Before trying to map a guest addr, mapcache will look into the list of range of address that have been moved (physmap/set_memory). There is currently one memory space like this, the vram, "moved" from were it's allocated to were the guest will look into. This help to have a succefull migration. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2012-01-13prepare for future GPLv2+ relicensingPaolo Bonzini
All files under GPLv2 will get GPLv2+ changes starting tomorrow. event_notifier.c and exec-obsolete.h were only ever touched by Red Hat employees and can be relicensed now. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-05block: convert qemu_aio_flush() calls to bdrv_drain_all()Stefan Hajnoczi
Many places in QEMU call qemu_aio_flush() to complete all pending asynchronous I/O. Most of these places actually want to drain all block requests but there is no block layer API to do so. This patch introduces the bdrv_drain_all() API to wait for requests across all BlockDriverStates to complete. As a bonus we perform checks after qemu_aio_wait() to ensure that requests really have finished. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-09xen-mapcache: Fix rlimit set size.Anthony PERARD
Previously, the address space soft limit was set mcache_max_size. So, before the mcache_max_size was reached by the mapcache, QEMU was killed for overuse of the virtual address space. This patch fix that by setting the soft limit the maximum than can have QEMU. So the soft and hard limit are always set to RLIM_INFINITY if QEMU is privileged. In case QEMU is not run as root and the limit is too low, the maximum mapcache size will be set the rlim_max - 80MB because observed that QEMU use 75MB more than the maximum mapcache size after several empirical tests. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29Fix a compilation error in xen-mapcache.cStefan Berger
This patch fixes a compilation error in xen-mapcache.c . /home/stefanb/qemu/qemu-git/xen-mapcache.c: In function ‘xen_ram_addr_from_mapcache’: /home/stefanb/qemu/qemu-git/xen-mapcache.c:240:42: error: variable ‘pentry’ set but not used [-Werror=unused-but-set-variable] cc1: all warnings being treated as errors Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-17xen: Clean up map cache API namingJan Kiszka
The map cache is a Xen thing, so its API should make this clear. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-19xen: remove xen_map_block and xen_unmap_blockStefano Stabellini
Replace xen_map_block with qemu_map_cache with the appropriate locking and size parameters. Replace xen_unmap_block with qemu_invalidate_entry. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-19xen: remove qemu_map_cache_unlockStefano Stabellini
There is no need for qemu_map_cache_unlock, just use qemu_invalidate_entry instead. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-19xen: fix qemu_map_cache with size != MCACHE_BUCKET_SIZEStefano Stabellini
Fix the implementation of qemu_map_cache: correctly support size arguments different from 0 or MCACHE_BUCKET_SIZE. The new implementation supports locked mapcache entries with size multiple of MCACHE_BUCKET_SIZE. qemu_invalidate_entry can correctly find and unmap these "large" mapcache entries given that the virtual address passed to qemu_invalidate_entry is the same returned by qemu_map_cache when the locked mapcache entry was created. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08Introduce qemu_put_ram_ptrAnthony PERARD
This function allows to unlock a ram_ptr give by qemu_get_ram_ptr. After a call to qemu_put_ram_ptr, the pointer may be unmap from QEMU when used with Xen. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08xen: Adds a cap to the number of map cache entries.John Baboval
Adds a cap to the number of map cache entries. This prevents the map cache from overwhelming system memory. I also removed the bitmap macros and #included bitmap.h instead. Signed-off-By: John Baboval <john.baboval@virtualcomputer.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08xen: Introduce the Xen mapcacheJun Nakajima
On IA32 host or IA32 PAE host, at present, generally, we can't create an HVM guest with more than 2G memory, because generally it's almost impossible for Qemu to find a large enough and consecutive virtual address space to map an HVM guest's whole physical address space. The attached patch fixes this issue using dynamic mapping based on little blocks of memory. Each call to qemu_get_ram_ptr makes a call to qemu_map_cache with the lock option, so mapcache will not unmap these ram_ptr. Blocks that do not belong to the RAM, but usually to a device ROM or to a framebuffer, are handled in a separate function. So the whole RAMBlock can be map. Signed-off-by: Jun Nakajima <jun.nakajima@intel.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-23 21:48:01 +0000