aboutsummaryrefslogtreecommitdiff
path: root/trace-events
AgeCommit message (Collapse)Author
2014-04-25s390x/kvm: rework KVM synchronize to tracing for some ONEREGSChristian Borntraeger
Some ONE_REGS on s390 are not protected by a capability. Older kernels might not provide those and return an error. Fortunately these registers are only critical for the migration path. There is no need to error out on reset and normal runtime. Furthermore, these kernels don't provide a proper dirty bitmap anyway, so let's use tracing for those errors. Also provide generic one reg helper to simplify the code. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-04-23usb: mtp filesharingGerd Hoffmann
Implementation of a USB Media Transfer Device device for easy filesharing. Read-only. No access control inside qemu, it will happily export any file it is able to open to the guest, i.e. standard unix access rights for the qemu process apply. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-04-01input: fix input_event_key_number trace eventGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-27migration: add more tracesAlexey Kardashevskiy
This replaces DPRINTF macro with tracepoints. This moves some messages from migration.c to savevm.c. This adds tracepoint to signal about fileds failed to migrate. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2014-03-25mirror: fix throttling delay calculationPaolo Bonzini
The throttling delay calculation was using an inaccurate sector count to calculate the time to sleep. This broke rate-limiting for the block mirror job. Move the delay calculation into mirror_iteration() where we know how many sectors were transferred. This lets us calculate an accurate delay time. Reported-by: Joaquim Barrera <jbarrera@ac.upc.edu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-08migration: extend section_start/end tracesAlexey Kardashevskiy
This adds @idstr to savevm_section_start and savevm_section_end tracepoints. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-03-08vl: add system_wakeup_request tracepointAlexey Kardashevskiy
It might be useful for tracing migration. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-03-07Merge remote-tracking branch 'remotes/kraxel/tags/pull-input-4' into stagingPeter Maydell
Input handling rewrite. SDL2 support. # gpg: Signature made Wed 05 Mar 2014 11:16:08 GMT using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-input-4: (38 commits) ui/sdl2 : initial port to SDL 2.0 (v2.0) console: add QemuUIInfo console: add head to index to qemu consoles. input: remove index_from_keycode (no users) input: move do_mouse_set to new core input: move qmp_query_mice to new core input: add input_mouse_mode tracepoint input: move mouse mode notifier to new core input-legacy: remove kbd_mouse_event input-legacy: remove kbd_mouse_is_absolute input-legacy: remove kbd_mouse_has_absolute input-legacy: remove kbd_put_keycode input: trace events input: mouse: switch cocoa ui to new core input: keyboard: switch cocoa ui to new core input: mouse: switch monitor to new core input: mouse: switch spice ui to new core input: mouse: switch vnc ui to new core input: mouse: switch sdl ui to new core input: mouse: switch gtk ui to new core ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-07Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' ↵Peter Maydell
into staging Patch queue for ppc - 2014-03-05 This pull request includes: - VSX emulation support - book3s pr/hv selection - some bug fixes - qdev stable numbering - eTSEC emulation # gpg: Signature made Wed 05 Mar 2014 02:14:19 GMT using RSA key ID 03FEDC60 # gpg: Can't check signature: public key not found * remotes/agraf/tags/signed-ppc-for-upstream: (130 commits) target-ppc: spapr: e500: fix to use cpu_dt_id target-ppc: add PowerPCCPU::cpu_dt_id target-ppc: Introduce hypervisor call H_GET_TCE target-ppc: Update ppc_hash64_store_hpte to support updating in-kernel htab target-ppc: Change the hpte store API target-ppc: Fix page table lookup with kvm enabled target-ppc: Fix htab_mask calculation target-ppc: Use Additional Temporary in stqcx Case target-ppc: Fix Compiler Warnings Due to 64-Bit Constants Declared as UL PPC: sPAPR: Only use getpagesize() when we run with kvm target-ppc/translate.c: Use ULL suffix for 64 bit constants spapr-vlan: flush queue whenever can_receive can go from false to true target-ppc: Altivec 2.07: Vector Permute and Exclusive OR target-ppc: Altivec 2.07: Vector SHA Sigma Instructions target-ppc: Altivec 2.07: AES Instructions target-ppc: Altivec 2.07: Binary Coded Decimal Instructions target-ppc: Altivec 2.07: Vector Polynomial Multiply Sum target-ppc: Altivec 2.07: Vector Gather Bits by Bytes target-ppc: Altivec 2.07: Doubleword Compares target-ppc: Altivec 2.07: vbpermq Instruction ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-05input: add input_mouse_mode tracepointGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05input: trace eventsGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05s390x/virtio-ccw: Adapter interrupt support.Cornelia Huck
Handle the new CCW_CMD_SET_IND_ADAPTER command enabling adapter interrupts on guest request. When active, host->guest notifications will be handled via global_indicator -> queue indicators instead of queue indicators + subchannel I/O interrupt. Indicators for virtqueues may be present at an offset. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-03-05target-ppc: Introduce hypervisor call H_GET_TCELaurent Dufour
This patch introduces the hypervisor call H_GET_TCE which is basically the reverse of H_PUT_TCE, as defined in the Power Architecture Platform Requirements (PAPR). The hcall H_GET_TCE is required by the kdump kernel which is calling it to retrieve the TCE set up by the panicing kernel. Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05PPC: KVM: suppress warnings about not supported SPRsAlexey Kardashevskiy
PR KVM lacks support of many SPRs in set/get one register API but it does really break PR KVM. So convert them to switchable traces for now. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-04Merge remote-tracking branch 'remotes/borntraeger/tags/kvm-s390-20140227' ↵Peter Maydell
into staging Several features, fixes and cleanups for kvm/s390: - sclp event facility: cleanup structure. This allows to use realize/unrealize as well as migration support via vmsd - reboot: Two fixes that make reboot much more reliable - ipl: make elf loading more robust - flic interrupt controller: This allows to migrate floating interrupts, as well as clear them on reset etc. - enable async_pf feature of KVM on s390 - several sclp fixes and cleanups - several sigp fixes and cleanups * remotes/borntraeger/tags/kvm-s390-20140227: (22 commits) s390x/ipl: Fix crash of ELF images with arbitrary entry points s390x/kvm: Rework priv instruction handlers s390x/kvm: Add missing SIGP CPU RESET order s390x/kvm: Rework SIGP INITIAL CPU RESET handler s390x/cpu: Use ioctl to reset state in the kernel s390-ccw.img: new binary rom to match latest fixes s390-ccw.img: Fix sporadic errors with ccw boot image - initialize css s390-ccw.img: Fix sporadic reboot hangs: Initialize next_idx s390x/event-facility: exploit realize/unrealize s390x/event-facility: add support for live migration s390x/event-facility: code restructure s390x/event-facility: some renaming s390x/sclp: Fixed setting of condition code register s390x/sclp: Add missing checks to SCLP handler s390x/sclp: Fixed the size of sccb and code parameter s390x/eventfacility: mask out commands s390x/virtio-hcall: Specification exception for illegal subcodes s390x/virtio-hcall: Add range check for hypervisor call s390x/kvm: Fixed bad SIGP SET-ARCHITECTURE handler s390x/async_pf: Check for apf extension and enable pfault ... Conflicts: linux-headers/linux/kvm.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-27s390x/kvm: implement floating-interrupt controller deviceJens Freimann
This patch implements a floating-interrupt controller device (flic) which interacts with the s390 flic kvm_device. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-26kvm: Common device control API functionsChristoffer Dall
Introduces two simple functions: int kvm_device_ioctl(int fd, int type, ...); int kvm_create_device(KVMState *s, uint64_t type, bool test); These functions wrap the basic ioctl-based interactions with KVM in a way similar to other KVM ioctl wrappers. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1392687720-26806-4-git-send-email-christoffer.dall@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-19trace-events: Fix typo in "offset"Kevin Wolf
s/offet/offset/ Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-09qcow2: remove n_start and n_end of qcow2_alloc_cluster_offset()Hu Tao
n_start can be actually calculated from offset. The number of sectors to be allocated(n_end - n_start) can be passed in in num. By removing n_start and n_end, we can save two parameters. The side effect is there is a bug in qcow2.c:preallocate() that passes incorrect n_start to qcow2_alloc_cluster_offset() is fixed. The bug can be triggerred by a larger cluster size than the default value(65536), for example: ./qemu-img create -f qcow2 \ -o 'cluster_size=131072,preallocation=metadata' file.img 4G Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-16usb: add support for microsoft os descriptorsGerd Hoffmann
This patch adds support for special usb descriptors used by microsoft windows. They allow more fine-grained control over driver binding and adding entries to the registry for configuration. As this is a guest-visible change the "msos-desc" compat property has been added to turn this off for 1.7 + older Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-07Merge remote-tracking branch 'stefanha/block' into stagingAnthony Liguori
# By Paolo Bonzini (17) and others # Via Stefan Hajnoczi * stefanha/block: (48 commits) qemu-iotests: filter QEMU monitor \r\n aio: make aio_poll(ctx, true) block with no fds block: clean up bdrv_drain_all() throttling comments qcow2: use start_of_cluster() and offset_into_cluster() everywhere qemu-img: decrease progress update interval on convert qemu-img: round down request length to an aligned sector qemu-img: dynamically adjust iobuffer size during convert block/iscsi: set bs->bl.opt_transfer_length block: add opt_transfer_length to BlockLimits block/iscsi: set bdi->cluster_size qemu-img: fix usage instruction for qemu-img convert qemu-img: add support for skipping zeroes in input during convert qemu-nbd: add doc for option -f qemu-iotests: add test for snapshot in qemu-img convert qemu-img: add -l for snapshot in convert qemu-iotests: add 058 internal snapshot export with qemu-nbd case qemu-nbd: support internal snapshot export snapshot: distinguish id and name in load_tmp qemu-iotests: Split qcow2 only cases in 048 qemu-iotests: Clean up spaces in usage output ... Message-id: 1386347807-27359-1-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-06Merge remote-tracking branch 'kraxel/tags/pull-usb-1' into stagingAnthony Liguori
Improvements for usb3 bulk stream (usb core, xhci). Bugfixes for uas emulation. Add remote wakeup support for ehci. Add suspend support for xhci. Misc minor tweaks and fixes. # gpg: Signature made Thu 28 Nov 2013 11:44:49 PM PST using RSA key ID D3E87138 # gpg: Can't check signature: public key not found # By Hans de Goede (11) and others # Via Gerd Hoffmann * kraxel/tags/pull-usb-1: usb: move usb_{hi,lo} helpers to header file. usb: add vendor request defines trace-events: Clean up after removal of old usb-host code Revert "usb-tablet: Don't claim wakeup capability for USB-2 version" ehci: implement port wakeup xhci: Call usb_device_alloc/free_streams usb: Add usb_device_alloc/free_streams usb: Add max_streams attribute to endpoint info uas: s/ui/iu/ uas: Fix response iu struct definition uas: Bounds check tags when using streams uas: Streams are numbered 1-y, rather then 0-x uas: Fix / cleanup usb_uas_task error handling uas: Only use report iu-s for task_mgmt status reporting scsi: Add 2 new sense codes needed by uas xhci: add support for suspend/resume xhci: Add a few missing checks for disconnected devices Message-id: 1385712381-30918-1-git-send-email-kraxel@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-03raw-posix: implement write_zeroes with MAY_UNMAP for filesPaolo Bonzini
Writing zeroes to a file can be done by punching a hole if MAY_UNMAP is set. Note that in this case ENOTSUP is not ignored, but makes the block layer fall back to the generic implementation. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-03block: add bdrv_aio_write_zeroesPaolo Bonzini
This will be used by the SCSI layer. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Lieven <pl@kamp.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-03block: add flags argument to bdrv_co_write_zeroes tracepointPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Lieven <pl@kamp.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-02gtk: Replace conditional debug messages by trace methodsStefan Weil
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-02console: Replace conditional debug messages by trace methodsStefan Weil
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-11-28trace-events: Clean up after removal of old usb-host codeMarkus Armbruster
Commit b5613fd neglected to drop the trace events along with the code. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-11-28ehci: implement port wakeupGerd Hoffmann
Update portsc register and raise irq in case a suspended port is woken up, so remote wakeup works on our ehci ports. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-23Merge remote-tracking branch 'mjt/trivial-patches' into stagingAnthony Liguori
# By Stefan Weil (8) and others # Via Michael Tokarev * mjt/trivial-patches: tests/.gitignore: ignore test-throttle exec: Fix broken build for MinGW (regression) kvm: Fix compiler warning (clang) tcg-sparc: Fix parenthesis warning Makefile: Remove some more files when cleaning target-i386: Fix segment cache dump iov: avoid "orig_len may be used unitialized" warning vscclient: remove unnecessary use of uninitialized variable trace-events: Clean up with scripts/cleanup-trace-events.pl again tci: Fix qemu-alpha on 32 bit hosts (wrong assertions) *-user: Improve documentation for lock_user function MAINTAINERS: Add missing entry to filelist for TCI target translate-all: Fix formatting of dump output *-user: Fix typo in comment (ulocking -> unlocking) docs: Fix IO port number for CPU present bitmap. q35: Fix typo in constant DEFUALT -> DEFAULT. configure: Undefine _FORTIFY_SOURCE prior using it Message-id: 1379696296-32105-1-git-send-email-mjt@msgid.tls.msk.ru
2013-09-20trace-events: Clean up with scripts/cleanup-trace-events.pl againMarkus Armbruster
Event qxl_render_blit_guest_primary_initialized is unused since commit c58c7b9, drop it. Commit 42e5b4c moved hw/ppc/xics.c to hw/intc/xics.c without updating the comment in trace-events. "scripts/cleanup-trace-events.pl trace-events | diff trace-events" is now clean again. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-09-20kvm: fix traces to use %x instead of %dAlexey Kardashevskiy
KVM request types are normally defined using hex constants but QEMU traces print decimal values instead, which is not very convenient. This changes the request type format from %d to %x. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-10qxl: trace io port nameGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-03Merge remote-tracking branch 'kraxel/usb.88' into stagingAnthony Liguori
# By Gerd Hoffmann (10) and Marcel Apfelbaum (1) # Via Gerd Hoffmann * kraxel/usb.88: usb/dev-hid: Modified usb-tablet category from Misc to Input Revert "usb-hub: report status changes only once" usb-hub: add tracepoint for status reports usb: parallelize usb3 streams uas: add property for request logging xhci: reset port when disabling slot xhci: emulate intr endpoint intervals correctly xhci: fix endpoint interval calculation xhci: add port to slot_address tracepoint xhci: add tracepoint for endpoint state changes xhci: remove leftover debug printf Message-id: 1378117055-29620-1-git-send-email-kraxel@redhat.com Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-03Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
pc,pci,virtio fixes and cleanups This includes pc and pci cleanups and enhancements, and a virtio bugfix for level interrupts. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Sun 01 Sep 2013 03:15:36 AM CDT using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By Michael S. Tsirkin (3) and others # Via Michael S. Tsirkin * mst/tags/for_anthony: virtio_pci: fix level interrupts with irqfd pc: reduce duplication, fix PIIX descriptions hw: Clean up bogus default boot order pci: add config space access traces pc: fix regression for 64 bit PCI memory pci: Introduce helper to retrieve a PCI device's DMA address space Message-id: 1378023590-11109-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-02usb-hub: add tracepoint for status reportsGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-02xhci: add port to slot_address tracepointGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-02xhci: add tracepoint for endpoint state changesGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-02PPC: spapr: iommu: rework tracesAlexey Kardashevskiy
This converts old style fprintf to traces. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [agraf: change patch subject] Signed-off-by: Alexander Graf <agraf@suse.de>
2013-08-28pci: add config space access tracesAlexey Kardashevskiy
This adds pci_cfg_read and pci_cfg_write traces for config spaces accesses. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-29memory: add tracepoints for MMIO reads/writesPaolo Bonzini
This is quite handy to debug softmmu targets. Reviewed-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1375016242-32651-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29Xen PV DevicePaul Durrant
Introduces a new Xen PV PCI device which will act as a binding point for PV drivers for Xen. The device has parameterized vendor-id, device-id and revision to allow to be configured as a binding point for any vendor's PV drivers. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
2013-07-18trace-events: Fix up source file commentsMarkus Armbruster
They're all wrong since (at least) Paolo's big source tree reorganization. Need to shuffle some event declarations around to keep them under the correct source file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-18trace-events: Drop unused eventsMarkus Armbruster
Dropped event Unused since mirror_cow 884fea4 paio_complete 47e6b25 paio_cancel 47e6b25 usb_ehci_data 0ce668b megasas_qf_dequeue never used megasas_handle_frame never used megasas_io_continue never used megasas_iovec_map_failed never used megasas_dcmd_map_failed never used milkymist_softusb_mouse_event 4c15ba9 xen_map_block 6506e4f xen_unmap_block 6506e4f qemu_spice_start 67be672 qemu_spice_stop 67be672 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-12Force auto-convegence of live migrationChegu Vinod
If a user chooses to turn on the auto-converge migration capability these changes detect the lack of convergence and throttle down the guest. i.e. force the VCPUs out of the guest for some duration and let the migration thread catchup and help converge. Verified the convergence using the following : - Java Warehouse workload running on a 20VCPU/256G guest(~80% busy) - OLTP like workload running on a 80VCPU/512G guest (~80% busy) Sample results with Java warehouse workload : (migrate speed set to 20Gb and migrate downtime set to 4seconds). (qemu) info migrate capabilities: xbzrle: off auto-converge: off <---- Migration status: active total time: 1487503 milliseconds expected downtime: 519 milliseconds transferred ram: 383749347 kbytes remaining ram: 2753372 kbytes total ram: 268444224 kbytes duplicate: 65461532 pages skipped: 64901568 pages normal: 95750218 pages normal bytes: 383000872 kbytes dirty pages rate: 67551 pages --- (qemu) info migrate capabilities: xbzrle: off auto-converge: on <---- Migration status: completed total time: 241161 milliseconds downtime: 6373 milliseconds transferred ram: 28235307 kbytes remaining ram: 0 kbytes total ram: 268444224 kbytes duplicate: 64946416 pages skipped: 64903523 pages normal: 7044971 pages normal bytes: 28179884 kbytes Signed-off-by: Chegu Vinod <chegu_vinod@hp.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-06-28block: add basic backup support to block driverDietmar Maurer
backup_start() creates a block job that copies a point-in-time snapshot of a block device to a target block device. We call backup_do_cow() for each write during backup. That function reads the original data from the block device before it gets overwritten. The data is then written to the target device. Currently backup cluster size is hardcoded to 65536 bytes. [I made a number of changes to Dietmar's original patch and folded them in to make code review easy. Here is the full list: * Drop BackupDumpFunc interface in favor of a target block device * Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes() * Use 0 delay instead of 1us, like other block jobs * Unify creation/start functions into backup_start() * Simplify cleanup, free bitmap in backup_run() instead of cb * function * Use HBitmap to avoid duplicating bitmap code * Use bdrv_getlength() instead of accessing ->total_sectors * directly * Delete the backup.h header file, it is no longer necessary * Move ./backup.c to block/backup.c * Remove #ifdefed out code * Coding style and whitespace cleanups * Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks * Keep our own in-flight CowRequest list instead of using block.c tracked requests. This means a little code duplication but is much simpler than trying to share the tracked requests list and use the backup block size. * Add on_source_error and on_target_error error handling. * Use trace events instead of DPRINTF() -- stefanha] Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-24Merge remote-tracking branch 'bonzini/iommu-for-anthony' into stagingAnthony Liguori
# By Paolo Bonzini (11) and others # Via Paolo Bonzini * bonzini/iommu-for-anthony: memory: clean up phys_page_find memory: populate FlatView for new address spaces memory: limit sections in the radix tree to the actual address space size s390x: reduce TARGET_PHYS_ADDR_SPACE_BITS to 62 memory: fix address space initialization/destruction memory: make memory_global_sync_dirty_bitmap take an AddressSpace memory: do not duplicate memory_region_destructor_none memory: Rename readable flag to romd_mode memory: Replace open-coded memory_region_is_romd memory: allow memory_region_find() to run on non-root memory regions memory: assert that PhysPageEntry's ptr does not overflow exec: eliminate stq_phys_notdirty exec: make qemu_get_ram_ptr private exec: eliminate qemu_put_ram_ptr exec: remove obsolete comment Message-id: 1369414987-8839-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-24exec: eliminate qemu_put_ram_ptrPaolo Bonzini
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-24coroutine: stop using AioContext in CoQueueStefan Hajnoczi
qemu_co_queue_next(&queue) arranges that the next queued coroutine is run at a later point in time. This deferred restart is useful because the caller may not want to transfer control yet. This behavior was implemented using QEMUBH in the past, which meant that CoQueue (and hence CoMutex and CoRwlock) had a dependency on the AioContext event loop. This hidden dependency causes trouble when we move to a world with multiple event loops - now qemu_co_queue_next() needs to know which event loop to schedule the QEMUBH in. After pondering how to stash AioContext I realized the best solution is to not use AioContext at all. This patch implements the deferred restart behavior purely in terms of coroutines and no longer uses QEMUBH. Here is how it works: Each Coroutine has a wakeup queue that starts out empty. When qemu_co_queue_next() is called, the next coroutine is added to our wakeup queue. The wakeup queue is processed when we yield or terminate. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-20osdep: fix qemu_anon_ram_free trace (+ fix compilation on 32 bit hosts)Hervé Poussineau
Commit e7a09b92b70786f9e8c5fbf787e0248c6ebbe707 added a trace at each memory freeing, but unfortunately inverted size and pointer when printing them. Fix trace. This also led to a compilation error on 32 bit hosts: In file included from include/trace.h:4:0, from trace/generated-events.c:3: ./trace/generated-tracers.h: In function ‘trace_qemu_anon_ram_free’: ./trace/generated-tracers.h:64:9: error: format ‘%zu’ expects argument of type ‘size_t’, but argument 3 has type ‘void *’ [-Werror=format] ./trace/generated-tracers.h:64:9: error: format ‘%p’ expects argument of type ‘void *’, but argument 4 has type ‘size_t’ [-Werror=format] Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-id: 1369045989-14016-1-git-send-email-hpoussin@reactos.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-30 23:56:22 +0000