aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2013-04-29libqos: Convert fw_cfg values to host endiannessAndreas Färber
The fw_cfg ABI is Little Endian, so byte-swap the generically read byte array to host endianness. This unbreaks the fw_cfg tests on ppc. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Message-id: 1367167547-19931-1-git-send-email-afaerber@suse.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-26block: Disable driver-specific options for 1.5Kevin Wolf
We don't want to commit to the API yet before everything is worked out. Disable it for the 1.5 release. This commit is meant to be reverted after the 1.5 release. The disabling of the driver-specific options is achieved by applying the old checks while parsing the command line. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-22qemu-iotests: add 053 unaligned compressed image size testStefan Hajnoczi
Test that qemu-img convert -c works when input image length is not a multiple of the cluster size. Previously an error message would be produced: qemu-img: error while compressing sector 0: Input/output error Now that qcow2 and qcow handle this case the test passes successfully. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-04-22block: Fail gracefully when using a format driver on protocol levelKevin Wolf
Specifying the wrong driver could fail an assertion: $ qemu-system-x86_64 -drive file.driver=qcow2,file=x qemu-system-x86_64: block.c:721: bdrv_open_common: Assertion `file != ((void *)0)' failed. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-04-22qemu-iotests: Fix _filter_qemuKevin Wolf
$QEMU_PROG happens to be 'qemu' in my setup, so this sed command replaces a bit too much. Restrict it to the start of the line and to when it's followed by a colon, i.e. the form used by error messages. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-17fw_cfg: add qtest test caseAnthony Liguori
This validates some basic characteristics of fw_cfg. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1366123521-4330-8-git-send-email-aliguori@us.ibm.com
2013-04-17i440fx-test: add test for PAM functionalityAnthony Liguori
This tests PAM settings for the i440fx. This test does a lot of byte MMIO which is fairly slow with qtest today. But the test does complete in under 2 seconds. We don't fully emulate PAM largely because of limitations with KVM so we #if 0 that part of the test case. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1366123521-4330-7-git-send-email-aliguori@us.ibm.com
2013-04-17i440fx-test: add test to compare default register valuesAnthony Liguori
This test compares all of the default register values against the spec. It turns out we deviate in quite a few places. These places are really only visible to the BIOS though which is why this hasn't created any problems. The deviation actually happens in the core PCI layer so I suspect it's not a simple fix if we really care to fix it. For now, just disable the affected checks. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1366123521-4330-6-git-send-email-aliguori@us.ibm.com
2013-04-17libqos: add malloc supportAnthony Liguori
This is a very simple allocator for the PC platform. It should be possible to add backends for other platforms. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1366123521-4330-5-git-send-email-aliguori@us.ibm.com
2013-04-17libqos: add fw_cfg supportAnthony Liguori
fw_cfg is needed to get the top of memory which is necessary for doing PCI allocation and allocating RAM for DMA. Add a PC version of fw_cfg and enough abstraction to support other platforms. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1366123521-4330-4-git-send-email-aliguori@us.ibm.com
2013-04-17qtest: add libqos including PCI supportAnthony Liguori
This includes basic PCI support for the PC platform. Enough abstraction should be present to support non-PC platforms too. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1366123521-4330-3-git-send-email-aliguori@us.ibm.com
2013-04-17qtest: don't use system command to avoid double forkAnthony Liguori
Currently we waitpid on the child process we spawn off that does nothing more than system() another process. While this does not appear to be incorrect, it's wasteful and confusing so get rid of it. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1366123521-4330-2-git-send-email-aliguori@us.ibm.com
2013-04-15target-mips: fix mipsdsp_mul_q15_q15 and tests for MAQ_SA_W_PHL/PHRPetar Jovanovic
The operands for MAQ_SA_W.PHL/MAQ_SA_W.PHR must in specified format. Otherwise, the results are unpredictable. Once the operands were corrected in the tests (part of this change), a bug in mipsdsp_mul_q15_q15 became visible. This change corrects the tests for MAQ_SA_W.PHL/MAQ_SA_W.PHR and fixes sign-related issue in mipsdsp_mul_q15_q15. It also removes unnecessary comment. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
2013-04-15iotests: Add 'check -ssh' option to test Secure Shell block device.Richard W.M. Jones
Note in order to run these tests on ssh, you must be running a local ssh daemon, and that daemon must accept loopback connections, and ssh-agent has to be set up to allow logins on the local daemon. In other words, the following command should just work without demanding any passphrase: ssh localhost Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-15qemu-iotests: filter QEMU_PROG in 051.outStefan Hajnoczi
Filter the name of the QEMU executable so the output can be diffed no matter what QEMU_PROG is (e.g. qemu-system-x86_64). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-15qemu-iotests: Add test for -drive optionsKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-15qemu-iotests: A few more bdrv_pread/pwrite testsKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-13qjson: to_json() case QTYPE_QSTRING is buggy, rewriteMarkus Armbruster
Known bugs in to_json(): * A start byte for a three-byte sequence followed by less than two continuation bytes is split into one-byte sequences. * Start bytes for sequences longer than three bytes get misinterpreted as start bytes for three-byte sequences. Continuation bytes beyond byte three become one-byte sequences. This means all characters outside the BMP are decoded incorrectly. * One-byte sequences with the MSB are put into the JSON string verbatim when char is unsigned, producing invalid UTF-8. When char is signed, they're replaced by "\\uFFFF" instead. This includes \xFE, \xFF, and stray continuation bytes. * Overlong sequences are happily accepted, unless screwed up by the bugs above. * Likewise, sequences encoding surrogate code points or noncharacters. * Unlike other control characters, ASCII DEL is not escaped. Except in overlong encodings. My rewrite fixes them as follows: * Malformed UTF-8 sequences are replaced. Except the overlong encoding \xC0\x80 of U+0000 is still accepted. Permits embedding NUL characters in C strings. This trick is known as "Modified UTF-8". * Sequences encoding code points beyond Unicode range are replaced. * Sequences encoding code points beyond the BMP produce a surrogate pair. * Sequences encoding surrogate code points are replaced. * Sequences encoding noncharacters are replaced. * ASCII DEL is now always escaped. The replacement character is U+FFFD. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-04-13check-qjson: Test noncharacters other than U+FFFE, U+FFFF in stringsMarkus Armbruster
Test cases cover the two noncharacters in the BMP. Add tests for the other 64 noncharacters. Three existing test cases involve noncharacters U+FFFF and U+10FFFF. Instead of deleting them as now duplicates, adjust them to use U+FFFC and U+10FFFFD. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-04-13check-qjson: Improve a few comments, delete bogus onesMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-04-08Merge remote-tracking branch 'bonzini/hw-dirs' into stagingAnthony Liguori
# By Paolo Bonzini # Via Paolo Bonzini * bonzini/hw-dirs: (35 commits) hw: move private headers to hw/ subdirectories. MAINTAINERS: update for source code movement hw: move last file to hw/arm/ hw: move hw/kvm/ to hw/i386/kvm hw: move ARM CPU cores to hw/cpu/, configure with default-configs/ hw: move other devices to hw/misc/, configure with default-configs/ hw: move NVRAM interfaces to hw/nvram/, configure with default-configs/ hw: move GPIO interfaces to hw/gpio/, configure with default-configs/ hw: move interrupt controllers to hw/intc/, configure with default-configs/ hw: move DMA controllers to hw/dma/, configure with default-configs/ hw: move VFIO and ivshmem to hw/misc/ hw: move PCI bridges to hw/pci-* or hw/ARCH hw: move SD/MMC devices to hw/sd/, configure with default-configs/ hw: move timer devices to hw/timer/, configure with default-configs/ hw: move ISA bridges and devices to hw/isa/, configure with default-configs/ hw: move char devices to hw/char/, configure via default-configs/ hw: move more files to hw/xen/ hw: move SCSI controllers to hw/scsi/, configure via default-configs/ hw: move SSI controllers to hw/ssi/, configure via default-configs/ hw: move I2C controllers to hw/i2c/, configure via default-configs/ ... Message-id: 1365442249-18259-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-08hw: move headers to include/Paolo Bonzini
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08configure: Don't fall back to gthread coroutine backendPeter Maydell
The gthread coroutine backend is broken and does not produce a working QEMU; it is only useful for some very limited debugging situations. Clean up the backend selection logic in configure so that it now runs "if on windows use windows; else prefer ucontext; else sigaltstack". To do this we refactor the configure code to separate out "test whether we have a working ucontext", "pick a default if user didn't specify" and "validate that user didn't specify something invalid", rather than having all three of these run together. We also simplify the Makefile logic so it just links in the backend the configure script selects. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1365419487-19867-3-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-05test-visitor-serialization: Fix some memory leaksStefan Berger
This patch fixes some of the memory leaks in test-visitor-serialization but not all of them. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-28qcow2: Gather clusters in a looping loopKevin Wolf
Instead of just checking once in exactly this order if there are dependendies, non-COW clusters and new allocation, this starts looping around these. This way we can, for example, gather non-COW clusters after new allocations as long as the host cluster offsets stay contiguous. Once handle_dependencies() is extended so that COW areas of in-flight allocations can be overwritten, this allows to continue with gathering other clusters (we wouldn't be able to do that without this change because we would have missed a possible second dependency in one of the next clusters). This means that in the typical sequential write case, we can combine the COW overwrite of one cluster with the allocation of the next cluster as soon as something like Delayed COW gets actually implemented. It is only by avoiding splitting requests this way that Delayed COW actually starts improving performance noticably. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-28qcow2: Improve check for overlapping allocationsKevin Wolf
The old code detected an overlapping allocation even when the allocations didn't actually overlap, but were only adjacent. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-28qcow2: Fix "total clusters" number in bdrv_checkKevin Wolf
This should be based on the virtual disk size, not on the size of the image. Interesting observation: With some VM state stored in the image file, percentages higher than 100% are possible, even though snapshots themselves are ignored. This is a qcow2 bug to be fixed another day: The VM state should be discarded in the active L2 tables after completing the snapshot creation. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-28qemu-iotests: More concurrent allocation scenariosKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-23Merge branch 'for-upstream' of git://github.com/mwalle/qemuBlue Swirl
* 'for-upstream' of git://github.com/mwalle/qemu: configure: rename OpenGL feature to GLX configure: proper OpenGL/GLX probe target-lm32: use HELPER() macro target-lm32: flush tlb after clearing env target-lm32: remove dead code target-lm32: fix cmpgui and cmpgeui opcodes tests: tcg: lm32: add more test cases target-lm32: don't log cpu state in translation lm32_uart: fix receive buffering milkymist-uart: fix receive buffering lm32-dis: fix NULL pointer dereference target-lm32: fix debug memory access
2013-03-19qemu-iotests: add 052 BDRV_O_SNAPSHOT testStefan Hajnoczi
Check that writes to an image opened with BDRV_O_SNAPSHOT do not modify the underlying image file. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-03-18tests: tcg: lm32: add more test casesMichael Walle
Esp. for testing zero/sign extend in compare operations. Signed-off-by: Michael Walle <michael@walle.cc>
2013-03-17target-mips: fix rndrashift_short_acc and code for EXTR_ instructionsPetar Jovanovic
Fix for rndrashift_short_acc to set correct value to higher 64 bits. This change also corrects conditions when bit 23 of the DSPControl register is set. The existing test files have been extended with several examples that trigger the issues. One bug/example in the test file for EXTR_RS_W has been found and reported by Klaus Peichl. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-15qemu-iotests: use -nographic in test case 007Stefan Hajnoczi
A comment explains that -nographic hangs test case 007. This is no longer the case so add -nographic. This makes the test suite faster and more pleasant to run since no windows pop up. I am not sure exactly when -nographic starting working for this case but there is no fundamental reason why graphics are needed here. Make sure the serial port is not on stdio, it would conflict with the monitor. Also remove unnecessary trailing whitespace on these lines. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Kevin Wolf <kwolf@redhat.com>
2013-03-15qemu-iotests: add tests for rebasing zero clustersPaolo Bonzini
If zero clusters are erroneously treated as unallocated, "qemu-img rebase" will copy the backing file's contents onto the cluster. The bug existed also in image streaming, but since the root cause was in qcow2's is_allocated implementation it is enough to test it with qemu-img. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-15threadpool: drop global thread poolStefan Hajnoczi
Now that each AioContext has a ThreadPool and the main loop AioContext can be fetched with bdrv_get_aio_context(), we can eliminate the concept of a global thread pool from thread-pool.c. The submit functions must take a ThreadPool* argument. block/raw-posix.c and block/raw-win32.c use aio_get_thread_pool(bdrv_get_aio_context(bs)) to fetch the main loop's ThreadPool. tests/test-thread-pool.c must be updated to reflect the new thread_pool_submit() function prototypes. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-08rtc-test: Fix test failures with recent glibCole Robinson
As of glib 2.35.4, glib changed its logic for ordering test cases: https://bugzilla.gnome.org/show_bug.cgi?id=694487 This was causing failures in rtc-test. Group the reordered test cases into their own suite, which maintains the original ordering. CC: qemu-stable@nongnu.org Signed-off-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-04target-mips: fix DSP overflow macro and affected routinesPetar Jovanovic
The previous implementation incorrectly used same macro to detect overflow for addition and subtraction. This patch makes distinction between these two, and creates separate macros. The affected routines are changed accordingly. This change also includes additions to the existing tests for SUBQ_S_PH and SUBQ_S_W that would trigger the fixed issue, and it removes dead code from the test file. The last test case in subq_s_w.c is a bug found/reported/ isolated by Klaus Peichl from Dolby. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-02-26Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
# By Paolo Bonzini (7) and others # Via Kevin Wolf * kwolf/for-anthony: (22 commits) pc: add compatibility machine types for 1.4 blockdev: enable discard by default qemu-nbd: add --discard option blockdev: add discard suboption to -drive block: implement BDRV_O_UNMAP block: complete all IOs before .bdrv_truncate coroutine: trim down nesting level in perf_nesting test coroutine: move pooling to common code qemu-iotests: Test qcow2 image creation options qemu-iotests: Add qemu-img compare test qemu-img: Add compare subcommand qemu-img: Add "Quiet mode" option block: Add synchronous wrapper for bdrv_co_is_allocated_above block: refuse negative iops and bps values block: use Error in do_check_io_limits() qcow2: support compressed clusters in BlockFragInfo qemu-img: add compressed clusters to BlockFragInfo qemu-img: fix missing space in qemu-img check output qcow2: record fragmentation statistics during check qcow2: introduce check_refcounts_l1/l2() flags ...
2013-02-26Merge remote-tracking branch 'luiz/queue/qmp' into stagingAnthony Liguori
# By Markus Armbruster # Via Luiz Capitulino * luiz/queue/qmp: check-qjson: More thorough testing of UTF-8 in strings
2013-02-23target-mips: fix for sign-issue in MULQ_W helperPetar Jovanovic
Correct sign-propagation before multiplication in MULQ_W helper. The change also fixes previously incorrect expected values in the tests for MULQ_RS.W and MULQ_S.W. Signed-off-by: Petar Jovanovic <petarj@mips.com> Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-02-23target-mips: fix for incorrect multiplication with MULQ_S.PHPetar Jovanovic
The change corrects sign-related issue with MULQ_S.PH. It also includes extension to the already existing test which will trigger the issue. Signed-off-by: Petar Jovanovic <petarj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-02-23Merge branch 'eflags3' of git://github.com/rth7680/qemuBlue Swirl
* 'eflags3' of git://github.com/rth7680/qemu: (61 commits) target-i386: Use movcond to implement shiftd. target-i386: Discard CC_OP computation in set_cc_op also target-i386: Use movcond to implement rotate flags. target-i386: Use movcond to implement shift flags. target-i386: Add CC_OP_CLR target-i386: Implement tzcnt and fix lzcnt target-i386: Use clz/ctz for bsf/bsr helpers target-i386: Implement ADX extension target-i386: Implement RORX target-i386: Implement SHLX, SARX, SHRX target-i386: Implement PDEP, PEXT target-i386: Implement MULX target-i386: Implement BZHI target-i386: Implement BLSR, BLSMSK, BLSI target-i386: Implement BEXTR target-i386: Implement ANDN target-i386: Implement MOVBE target-i386: Decode the VEX prefixes target-i386: Tidy prefix parsing target-i386: Use CC_SRC2 for ADC and SBB ...
2013-02-22coroutine: trim down nesting level in perf_nesting testPaolo Bonzini
20000 nested coroutines require 20 GB of virtual address space. Only nest 1000 of them so that the test (only enabled with "-m perf" on the command line) runs on 32-bit machines too. Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-02-22qemu-iotests: Test qcow2 image creation optionsKevin Wolf
Just create lots of images and try out each of the creation options that qcow2 provides (except backing_file/fmt for now) I'm not totally happy with the behaviour of qemu-img in each of the cases, but let's be explicit and update the test when we do change things later. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-02-22qemu-iotests: Add qemu-img compare testMiroslav Rezanina
Simple test for qemu-img compare to check it's working correctly. Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22qemu-img: add compressed clusters to BlockFragInfoStefan Hajnoczi
Show how many clusters are compressed. This can be used to monitor how many compressed clusters remain and whether to recompress the image. Suggested-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22qemu-img: find the image end offset during checkFederico Simoncelli
This patch adds the support for reporting the image end offset (in bytes). This is particularly useful after a conversion (or a rebase) where the destination is a block device in order to find the first unused byte at the end of the image. Signed-off-by: Federico Simoncelli <fsimonce@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-02-21check-qjson: More thorough testing of UTF-8 in stringsMarkus Armbruster
Test cases are scraped from Markus Kuhn's UTF-8 decoder capability and stress test at http://www.cl.cam.ac.uk/~mgk25/ucs/examples/UTF-8-test.txt Unfortunately, both JSON parser and formatter misbehave right now. This test expects current, incorrect results. They're all clearly marked, and are to be replaced by correct ones as the bugs get fixed. See comments in new utf8_string() for details. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-02-21Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori
# By Alin Tomescu (1) and others # Via Stefan Hajnoczi * stefanha/trivial-patches: .gitignore: Ignore optionrom/*.asm ppc: fix bamboo >256MB RAM initialization in hw/ppc4xx_devs.c Add some missing qtest binaries to .gitignore xilinx_axienet.c: Assert no error when making link Remove forward declaration of non-existant variable
2013-02-21Add some missing qtest binaries to .gitignoreDavid Gibson
These binaries are generated during make check on at least some configurations, so att them to .gitignore. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-15 23:41:25 +0000