aboutsummaryrefslogtreecommitdiff
path: root/tcg/s390/tcg-target.h
AgeCommit message (Collapse)Author
2021-01-07tcg: Remove TCG_TARGET_SUPPORT_MIRRORRichard Henderson
Now that all native tcg hosts support splitwx, remove the define. Replace the one use with a test for CONFIG_TCG_INTERPRETER. Reviewed-by: Joelle van Dyne <j@getutm.app> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-01-07tcg/s390: Support split-wx code generationRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-01-07tcg: Add --accel tcg,split-wx propertyRichard Henderson
Plumb the value through to alloc_code_gen_buffer. This is not supported by any os or tcg backend, so for now enabling it will result in an error. Reviewed-by: Joelle van Dyne <j@getutm.app> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-01-07tcg: Adjust tb_target_set_jmp_target for split-wxRichard Henderson
Pass both rx and rw addresses to tb_target_set_jmp_target. Reviewed-by: Joelle van Dyne <j@getutm.app> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-01-07tcg: Introduce INDEX_op_qemu_st8_i32Richard Henderson
Enable this on i386 to restrict the set of input registers for an 8-bit store, as required by the architecture. This removes the last use of scratch registers for user-only mode. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-01-02util: Extract flush_icache_range to cacheflush.cRichard Henderson
This has been a tcg-specific function, but is also in use by hardware accelerators via physmem.c. This can cause link errors when tcg is disabled. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201214140314.18544-3-richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-23qemu/atomic.h: rename atomic_ to qatomic_Stefan Hajnoczi
clang's C11 atomic_fetch_*() functions only take a C11 atomic type pointer argument. QEMU uses direct types (int, etc) and this causes a compiler error when a QEMU code calls these functions in a source file that also included <stdatomic.h> via a system header file: $ CC=clang CXX=clang++ ./configure ... && make ../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid) Avoid using atomic_*() names in QEMU's atomic.h since that namespace is used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h and <stdatomic.h> can co-exist. I checked /usr/include on my machine and searched GitHub for existing "qatomic_" users but there seem to be none. This patch was generated using: $ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \ sort -u >/tmp/changed_identifiers $ for identifier in $(</tmp/changed_identifiers); do sed -i "s%\<$identifier\>%q$identifier%g" \ $(git grep -I -l "\<$identifier\>") done I manually fixed line-wrap issues and misaligned rST tables. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
2019-04-24tcg: Add INDEX_op_extract2_{i32,i64}Richard Henderson
This will let backends implement the double-word shift operation. Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17tcg: Add TCG_TARGET_HAS_MEMORY_BSWAPRichard Henderson
For now, defined universally as true, since we previously required backends to implement swapped memory operations. Future patches may now remove that support where it is onerous. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-07tcg/s390: Use constant pool for moviRichard Henderson
Split out maybe_out_small_movi for use with other operations that want to add to the constant pool. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07tcg/s390: Introduce TCG_REG_TBRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07tcg: Rearrange ldst label trackingRichard Henderson
Dispense with TCGBackendData, as it has never been used for more than holding a single pointer. Use a define in the cpu/tcg-target.h to signal requirement for TCGLabelQemuLdst, so that we can drop the no-op tcg-be-null.h stubs. Rename tcg-be-ldst.h to tcg-ldst.inc.c. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07tcg: Move USE_DIRECT_JUMP discriminator to tcg/cpu/tcg-target.hRichard Henderson
Replace the USE_DIRECT_JUMP ifdef with a TCG_TARGET_HAS_direct_jump boolean test. Replace the tb_set_jmp_target1 ifdef with an unconditional function tb_target_set_jmp_target. While we're touching all backends, add a parameter for tb->tc_ptr; we're going to need it shortly for some backends. Move tb_set_jmp_target and tb_add_jump from exec-all.h to cpu-exec.c. This opens the possibility for TCG_TARGET_HAS_direct_jump to be a runtime decision -- based on host cpu capabilities, the size of code_gen_buffer, or a future debugging switch. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06tcg/s390: Use load-on-condition-2 facilityRichard Henderson
This allows LOAD HALFWORD IMMEDIATE ON CONDITION, eliminating one insn in some common cases. Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-06tcg/s390: Use distinct-operands facilityRichard Henderson
This allows using a 3-operand insn form for some arithmetic, logicals and shifts. Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-05tcg: Add tcg target default memory orderingPranith Kumar
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Message-Id: <20170829063313.10237-3-bobby.prani@gmail.com> [rth: Dropped ia64 hunk] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-06-05tcg/s390: Implement goto_ptrRichard Henderson
Tested-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-05tcg: Introduce goto_ptr opcode and tcg_gen_lookup_and_goto_ptrEmilio G. Cota
Instead of exporting goto_ptr directly to TCG frontends, export tcg_gen_lookup_and_goto_ptr(), which calls goto_ptr with the pointer returned by the lookup_tb_ptr() helper. This is the only use case we have for goto_ptr and lookup_tb_ptr, so having this function is very convenient. Furthermore, it trivially allows us to avoid calling the lookup helper if goto_ptr is not implemented by the backend. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1493263764-18657-2-git-send-email-cota@braap.org> Message-Id: <1493263764-18657-3-git-send-email-cota@braap.org> Message-Id: <1493263764-18657-4-git-send-email-cota@braap.org> Message-Id: <1493263764-18657-5-git-send-email-cota@braap.org> [rth: Squashed 4 related commits.] Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Add opcode for ctpopRichard Henderson
The number of actual invocations of ctpop itself does not warrent an opcode, but it is very helpful for POWER7 to use in generating an expansion for ctz. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg/s390: Handle clz opcodeRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Add clz and ctz opcodesRichard Henderson
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg/s390: Implement field extraction opcodesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg/s390: Expose host facilities to tcg-target.hRichard Henderson
This lets us expose facilities to TCG_TARGET_HAS_* defines directly, rather than hiding behind function calls. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Add field extraction primitivesRichard Henderson
Adds tcg_gen_extract_* and tcg_gen_sextract_* for extraction of fixed position bitfields, much like we already have for deposit. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-07-12tcg: Clean up tcg-target.h header guardsMarkus Armbruster
These use guard symbols like TCG_TARGET_$target. scripts/clean-header-guards.pl doesn't like them because they don't match their file name (they should, to make guard collisions less likely). Clean them up: use guard symbol $target_TCG_TARGET_H for tcg/$target/tcg-target.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg: Split trunc_shr_i32 opcode into extr[lh]_i64_i32Richard Henderson
Rather than allow arbitrary shift+trunc, only concern ourselves with low and high parts. This is all that was being used anyway. Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg: rename trunc_shr_i32 into trunc_shr_i64_i32Aurelien Jarno
The op is sometimes named trunc_shr_i32 and sometimes trunc_shr_i64_i32, and the name in the README doesn't match the name offered to the frontends. Always use the long name to make it clear it is a size changing op. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-06-03tcg: add TCG_TARGET_TLB_DISPLACEMENT_BITSPaolo Bonzini
This will be used to size the TLB when more than 8 MMU modes are used by the target. Limitations come from the limited size of the immediate fields (which sometimes, as in the case of Aarch64, extend to instructions that shift the immediate). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1424436345-37924-2-git-send-email-pbonzini@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-04tcg: Remove TCG_TARGET_HAS_new_ldstRichard Henderson
Since all backends have been converted, remove the compatibility code. Acked-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-15tcg-s390: Convert to new ldst opcodesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg-s390: Define TCG_TARGET_INSN_UNIT_SIZERichard Henderson
And use tcg pointer differencing functions as appropriate. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-28tcg: Add INDEX_op_trunc_shr_i32Richard Henderson
Let the backend do something special for truncation. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-18tcg: Use HOST_WORDS_BIGENDIANRichard Henderson
Instead of rolling a local TCG_TARGET_WORDS_BIGENDIAN. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Add qemu_ld_st_i32/64Richard Henderson
Step two in the transition, adding the new ldst opcodes. Keep the old opcodes around until all backends support the new opcodes. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change flush_icache_range arguments to uintptr_tRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Add muluh and mulsh opcodesRichard Henderson
Use them in places where mulu2 and muls2 are used. Optimize mulx2 with dead low part to mulxh. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-04-05tcg-s390: Implement deposit opcodesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-04-05tcg-s390: Implement movcond opcodesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-04-05tcg-s390: Implement mulu2_i64 opcodeRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-04-05tcg-s390: Implement add2/sub2 opcodesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-04-05tcg-s390: Remove useless preprocessor conditionsRichard Henderson
We only support 64-bit code generation for s390x. Don't clutter the code with ifdefs that suggest otherwise. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-04-05tcg-s390: Properly allocate a stack frame.Richard Henderson
Set TCG_TARGET_CALL_STACK_OFFSET properly for the abi. Allocate the standard TCG_STATIC_CALL_ARGS_SIZE. And while we're at it, allocate space for CPU_TEMP_BUF_NLONGS. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-02-23tcg: Add signed multiword multiplication operationsRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23tcg: Add 64-bit multiword arithmetic operationsRichard Henderson
Matching the 32-bit multiword arithmetic that we already have. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23tcg: Make 32-bit multiword operations optional for 64-bit hostsRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-19janitor: add guards to headersPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-12tcg: Remove TCG_TARGET_HAS_GUEST_BASE definePeter Maydell
GUEST_BASE support is now supported by all TCG backends, and is now mandatory. Drop the now-pointless TCG_TARGET_HAS_GUEST_BASE define (set by every backend) and the error if it is unset. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-09-21tcg: Introduce movcondRichard Henderson
Implemented with setcond if the target does not provide the optional opcode. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-15Remove unused CONFIG_TCG_PASS_AREG0 and dead codeBlue Swirl
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets, remove dead code and support for !CONFIG_TCG_PASS_AREG0 case. Remove dyngen-exec.h and all references to it. Although included by hw/spapr_hcall.c, it does not seem to use it. Remove unused HELPER_CFLAGS. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-03-03w64: Change data type of parameters for flush_icache_rangeStefan Weil
The TCG targets i386 and tci needed a change of the function prototype for w64. This change is currently not needed for the other TCG targets, but it can be applied to avoid code differences. Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-23 23:54:54 +0000