aboutsummaryrefslogtreecommitdiff
path: root/tcg/mips
AgeCommit message (Collapse)Author
2017-09-17tcg/mips: Fully convert tcg_target_op_defRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-17tcg: Remove tcg_regset_setRichard Henderson
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-17tcg: Remove tcg_regset_clearRichard Henderson
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-07tcg: Rearrange ldst label trackingRichard Henderson
Dispense with TCGBackendData, as it has never been used for more than holding a single pointer. Use a define in the cpu/tcg-target.h to signal requirement for TCGLabelQemuLdst, so that we can drop the no-op tcg-be-null.h stubs. Rename tcg-be-ldst.h to tcg-ldst.inc.c. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07tcg: Move USE_DIRECT_JUMP discriminator to tcg/cpu/tcg-target.hRichard Henderson
Replace the USE_DIRECT_JUMP ifdef with a TCG_TARGET_HAS_direct_jump boolean test. Replace the tb_set_jmp_target1 ifdef with an unconditional function tb_target_set_jmp_target. While we're touching all backends, add a parameter for tb->tc_ptr; we're going to need it shortly for some backends. Move tb_set_jmp_target and tb_add_jump from exec-all.h to cpu-exec.c. This opens the possibility for TCG_TARGET_HAS_direct_jump to be a runtime decision -- based on host cpu capabilities, the size of code_gen_buffer, or a future debugging switch. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-05tcg: Add tcg target default memory orderingPranith Kumar
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Message-Id: <20170829063313.10237-3-bobby.prani@gmail.com> [rth: Dropped ia64 hunk] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-07-19tcg/mips: reserve a register for the guest_base.Jiang Biao
Reserve a register for the guest_base using ppc code for reference. By doing so, we do not have to recompute it for every memory load. Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1499677934-2249-1-git-send-email-jiang.biao2@zte.com.cn>
2017-07-09tcg/mips: Bugfix for crash when running program with qemu-i386.Jiang Biao
When running a helloworld program with qemu-i386 in linux-user mode on Loongson 3A3000, it will crash. This patch fix the bug. Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn> Message-Id: <1499669979-25904-1-git-send-email-jiang.biao2@zte.com.cn> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-05tcg/mips: implement goto_ptrAurelien Jarno
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <20170430145254.25616-2-aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-05tcg: Introduce goto_ptr opcode and tcg_gen_lookup_and_goto_ptrEmilio G. Cota
Instead of exporting goto_ptr directly to TCG frontends, export tcg_gen_lookup_and_goto_ptr(), which calls goto_ptr with the pointer returned by the lookup_tb_ptr() helper. This is the only use case we have for goto_ptr and lookup_tb_ptr, so having this function is very convenient. Furthermore, it trivially allows us to avoid calling the lookup helper if goto_ptr is not implemented by the backend. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1493263764-18657-2-git-send-email-cota@braap.org> Message-Id: <1493263764-18657-3-git-send-email-cota@braap.org> Message-Id: <1493263764-18657-4-git-send-email-cota@braap.org> Message-Id: <1493263764-18657-5-git-send-email-cota@braap.org> [rth: Squashed 4 related commits.] Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-05-06tcg/mips: fix field extraction opcodeAurelien Jarno
The "msb" argument should correspond to (len - 1). Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2017-01-10tcg: Add opcode for ctpopRichard Henderson
The number of actual invocations of ctpop itself does not warrent an opcode, but it is very helpful for POWER7 to use in generating an expansion for ctz. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg/mips: Handle clz opcodeRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Add clz and ctz opcodesRichard Henderson
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Pass the opcode width to target_parse_constraintRichard Henderson
This will let us choose how to interpret a given constraint depending on whether the opcode is 32- or 64-bit. Which will let us share more constraint combinations between opcodes. At the same time, change the interface to return the advanced pointer instead of passing it in/out by reference. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Transition flat op_defs array to a target callbackRichard Henderson
This will allow the target to tailor the constraints to the auto-detected ISA extensions. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg/mips: Implement field extraction opcodesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Add field extraction primitivesRichard Henderson
Adds tcg_gen_extract_* and tcg_gen_sextract_* for extraction of fixed position bitfields, much like we already have for deposit. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-06tcg-mips: Adjust qemu_ld/st for mips64Jin Guojie
Tested-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: James Hogan <james.hogan@imgtec.com> Tested-by: YunQiang Su <wzssyqa@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Jin Guojie <jinguojie@loongson.cn> Message-Id: <1483592275-4496-11-git-send-email-jinguojie@loongson.cn>
2017-01-06tcg-mips: Adjust calling conventions for mips64Jin Guojie
Tested-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: James Hogan <james.hogan@imgtec.com> Tested-by: YunQiang Su <wzssyqa@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Jin Guojie <jinguojie@loongson.cn> Message-Id: <1483592275-4496-10-git-send-email-jinguojie@loongson.cn>
2017-01-06tcg-mips: Add tcg unwind infoJin Guojie
Tested-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: James Hogan <james.hogan@imgtec.com> Tested-by: YunQiang Su <wzssyqa@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Jin Guojie <jinguojie@loongson.cn> Message-Id: <1483592275-4496-9-git-send-email-jinguojie@loongson.cn>
2017-01-06tcg-mips: Adjust prologue for mips64Jin Guojie
Take stack frame parameters out from the function body. Tested-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: James Hogan <james.hogan@imgtec.com> Tested-by: YunQiang Su <wzssyqa@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Jin Guojie <jinguojie@loongson.cn> Message-Id: <1483592275-4496-8-git-send-email-jinguojie@loongson.cn>
2017-01-06tcg-mips: Adjust load/store functions for mips64Jin Guojie
tcg_out_ldst: using a generic ALIAS_PADD to avoid ifdefs tcg_out_ld: generates LD or LW tcg_out_st: generates SD or SW Tested-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: James Hogan <james.hogan@imgtec.com> Tested-by: YunQiang Su <wzssyqa@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Jin Guojie <jinguojie@loongson.cn> Message-Id: <1483592275-4496-7-git-send-email-jinguojie@loongson.cn>
2017-01-06tcg-mips: Adjust move functions for mips64Jin Guojie
tcg_out_mov: using OPC_OR as most mips assemblers do; tcg_out_movi: extended to 64-bit immediate. Tested-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: James Hogan <james.hogan@imgtec.com> Tested-by: YunQiang Su <wzssyqa@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Jin Guojie <jinguojie@loongson.cn> Message-Id: <1483592275-4496-6-git-send-email-jinguojie@loongson.cn>
2017-01-06tcg-mips: Add bswap32u and bswap64Jin Guojie
Without the mips32r2 instructions to perform swapping, bswap is quite large, dominating the size of each reverse-endian qemu_ld/qemu_st operation. Create two subroutines in the prologue block. The subroutines require extra reserved registers (TCG_TMP[2, 3]). Using these within qemu_ld means that we need not place additional restrictions on the qemu_ld outputs. Tested-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: James Hogan <james.hogan@imgtec.com> Tested-by: YunQiang Su <wzssyqa@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Jin Guojie <jinguojie@loongson.cn> Message-Id: <1483592275-4496-5-git-send-email-jinguojie@loongson.cn>
2017-01-06tcg-mips: Support 64-bit opcodesJin Guojie
Bulk patch adding 64-bit opcodes into tcg_out_op. Note that mips64 is as yet neither complete nor enabled. Tested-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: James Hogan <james.hogan@imgtec.com> Tested-by: YunQiang Su <wzssyqa@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Jin Guojie <jinguojie@loongson.cn> Message-Id: <1483592275-4496-4-git-send-email-jinguojie@loongson.cn>
2017-01-06tcg-mips: Add mips64 opcodesJin Guojie
Since the mips manual tables are in octal, reorg all of the opcodes into that format for clarity. Note that the 64-bit opcodes are as yet unused. Tested-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: James Hogan <james.hogan@imgtec.com> Tested-by: YunQiang Su <wzssyqa@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Jin Guojie <jinguojie@loongson.cn> Message-Id: <1483592275-4496-3-git-send-email-jinguojie@loongson.cn>
2017-01-06tcg-mips: Move bswap code to a subroutineJin Guojie
Without the mips32r2 instructions to perform swapping, bswap is quite large, dominating the size of each reverse-endian qemu_ld/qemu_st operation. Create a subroutine in the prologue block. The subroutine requires extra reserved registers (TCG_TMP[2, 3]). Using these within qemu_ld means that we need not place additional restrictions on the qemu_ld outputs. Tested-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: James Hogan <james.hogan@imgtec.com> Tested-by: YunQiang Su <wzssyqa@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Jin Guojie <jinguojie@loongson.cn> Message-Id: <1483592275-4496-2-git-send-email-jinguojie@loongson.cn>
2016-09-16tcg/mips: Add support for fencePranith Kumar
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Message-Id: <20160714202026.9727-7-bobby.prani@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-09-16tcg: Support arbitrary size + alignmentRichard Henderson
Previously we allowed fully unaligned operations, but not operations that are aligned but with less alignment than the operation size. In addition, arm32, ia64, mips, and sparc had been omitted from the previous overalignment patch, which would have led to that alignment being enforced. Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-07-12tcg: Clean up tcg-target.h header guardsMarkus Armbruster
These use guard symbols like TCG_TARGET_$target. scripts/clean-header-guards.pl doesn't like them because they don't match their file name (they should, to make guard collisions less likely). Clean them up: use guard symbol $target_TCG_TARGET_H for tcg/$target/tcg-target.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-05tcg: Optimize spills of constantsRichard Henderson
While we can store constants via constrants on INDEX_op_st_i32 et al, we weren't able to spill constants to backing store. Add a new backend interface, tcg_out_sti, which may store the constant (and is allowed to fail). Rearrange the temp_* helpers so that we only attempt to directly store a constant when the temp is becoming dead/free. Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-12tcg: Clean up direct block chaining data fieldsSergey Fedorov
Briefly describe in a comment how direct block chaining is done. It should help in understanding of the following data fields. Rename some fields in TranslationBlock and TCGContext structures to better reflect their purpose (dropping excessive 'tb_' prefix in TranslationBlock but keeping it in TCGContext): tb_next_offset => jmp_reset_offset tb_jmp_offset => jmp_insn_offset tb_next => jmp_target_addr jmp_next => jmp_list_next jmp_first => jmp_list_first Avoid using a magic constant as an invalid offset which is used to indicate that there's no n-th jump generated. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-12tcg/mips: Make direct jump patching thread-safeSergey Fedorov
Ensure direct jump patching in MIPS is atomic by using atomic_read()/atomic_set() for code patching. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Message-Id: <1461341333-19646-11-git-send-email-sergey.fedorov@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net> [rth: Merged the deposit32 followup.] [rth: Merged the following followup.] Message-Id: <1462210518-26522-1-git-send-email-sergey.fedorov@linaro.org>
2016-04-21tcg: check for CONFIG_DEBUG_TCG instead of NDEBUGAurelien Jarno
Check for CONFIG_DEBUG_TCG instead of NDEBUG, drop now useless code. Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 1461228530-14852-2-git-send-email-aurelien@aurel32.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-21tcg: use tcg_debug_assert instead of assert (fix performance regression)Aurelien Jarno
The TCG code is quite performance sensitive, but at the same time can also be quite tricky. That is why asserts that can be enabled with the --enable-debug-tcg configure option. This used to work the following way: | #include "config.h" | | ... | | #if !defined(CONFIG_DEBUG_TCG) && !defined(NDEBUG) | /* define it to suppress various consistency checks (faster) */ | #define NDEBUG | #endif | | ... | | #include <assert.h> Since commit 757e725b (tcg: Clean up includes) "config.h" as been replaced by "qemu/osdep.h" which itself includes <assert.h>. As a consequence the assertions are always enabled, even when using --disable-debug-tcg, causing a performance regression, especially on targets with many registers. For instance on qemu-system-ppc the speed difference is about 15%. tcg_debug_assert is controlled directly by CONFIG_DEBUG_TCG and already uses in some places. This patch replaces all the calls to assert into calss to tcg_debug_assert. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 1461228530-14852-1-git-send-email-aurelien@aurel32.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-05tcg/mips: Fix type of tcg_target_reg_alloc_order[]James Hogan
The MIPS TCG backend is the only one to have tcg_target_reg_alloc_order[] elements of type TCGReg rather than int. This resulted in commit 91478cefaaf2 ("tcg: Allocate indirect_base temporaries in a different order") breaking the build on MIPS since the type differed from indirect_reg_alloc_order[]: tcg/tcg.c:1725:44: error: pointer type mismatch in conditional expression [-Werror] order = rev ? indirect_reg_alloc_order : tcg_target_reg_alloc_order; ^ Make it an array of ints to fix the build and match other architectures. Fixes: 91478cefaaf2 ("tcg: Allocate indirect_base temporaries in a different order") Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <1459522179-6584-1-git-send-email-james.hogan@imgtec.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-23tcg: Remove unnecessary osdep.h includes from tcg-target.inc.cPeter Maydell
Commit 757e725b58c57d added a number of #include "qemu/osdep.h" files to the tcg-target.c files (as they were named at the time). These are unnecessary because these files are not standalone C files, and the tcg/tcg.c file which includes them will have already included osdep.h on their behalf. Remove the unneeded include directives. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1456238983-10160-4-git-send-email-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-23tcg: Rename tcg-target.c to tcg-target.inc.cPeter Maydell
Rename the per-architecture tcg-target.c files to tcg-target.inc.c. This makes it clearer that they are not intended to be standalone C files, but are instead #included into another source file. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1456238983-10160-2-git-send-email-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-01-29tcg: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-16-git-send-email-peter.maydell@linaro.org
2015-10-19tcg/mips: Support r6 SEL{NE, EQ}Z instead of MOVN/MOVZJames Hogan
Extend MIPS movcond implementation to support the SELNEZ/SELEQZ instructions introduced in MIPS r6 (where MOVN/MOVZ have been removed). Whereas the "MOVN/MOVZ rd, rs, rt" instructions have the following semantics: rd = [!]rt ? rs : rd The "SELNEZ/SELEQZ rd, rs, rt" instructions are slightly different: rd = [!]rt ? rs : 0 First we ensure that if one of the movcond input values is zero that it comes last (we can swap the input arguments if we invert the condition). This is so that it can exactly match one of the SELNEZ/SELEQZ instructions and avoid the need to emit the other one. Otherwise we emit the opposite instruction first into a temporary register, and OR that into the result: SELNEZ/SELEQZ TMP1, v2, c1 SELEQZ/SELNEZ ret, v1, c1 OR ret, ret, TMP1 Which does the following: ret = cond ? v1 : v2 Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1443788657-14537-7-git-send-email-james.hogan@imgtec.com>
2015-10-19tcg/mips: Support r6 multiply/divide encodingsJames Hogan
MIPSr6 adds several new integer multiply, divide, and modulo instructions, and removes several pre-r6 encodings, along with the HI/LO registers which were the implicit operands of some of those instructions. Update TCG to use the new instructions when built for r6. The new instructions actually map much more directly to the TCG ops, as they only provide a single 32-bit half of the result and in a normal general purpose register instead of HI or LO. The mulu2_i32 and muls2_i32 operations are no longer appropriate for r6, so they are removed from the TCG opcode table. This is because they would need to emit two separate host instructions anyway (for the high and low half of the result), which TCG can arrange automatically for us in the absense of mulu2_i32/muls2_i32 by splitting it into mul_i32 and mul*h_i32 TCG ops. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1443788657-14537-6-git-send-email-james.hogan@imgtec.com>
2015-10-19tcg/mips: Support r6 JR encodingJames Hogan
MIPSr6 encodes JR as JALR with zero as the link register, and the pre-r6 JR encoding is removed. Update TCG to use the new encoding when built for r6. We still use the old encoding for pre-r6, so as not to confuse return prediction stack hardware which may detect only particular encodings of the return instruction. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1443788657-14537-5-git-send-email-james.hogan@imgtec.com>
2015-10-19tcg/mips: Add use_mips32r6_instructions definitionJames Hogan
Add definition use_mips32r6_instructions to the MIPS TCG backend which is constant 1 when built for MIPS release 6. This will be used to decide between pre-R6 and R6 instruction encodings. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1443788657-14537-4-git-send-email-james.hogan@imgtec.com>
2015-09-19tcg/mips: pass oi to tcg_out_tlb_loadAurelien Jarno
Instead of computing mem_index and s_bits in both tcg_out_qemu_ld and tcg_out_qemu_st function and passing them to tcg_out_tlb_load, directly pass oi to the tcg_out_tlb_load function and compute mem_index and s_bits there. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2015-09-19tcg/mips: move tcg_out_addsub2Aurelien Jarno
Somehow the tcg_out_addsub2 function ended-up in the middle of the qemu_ld/st related functions. Move it with other arithmetics related functions. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2015-09-19tcg/mips: Fix clobbering of qemu_ld inputsJames Hogan
The MIPS TCG backend implements qemu_ld with 64-bit targets using the v0 register (base) as a temporary to load the upper half of the QEMU TLB comparator (see line 5 below), however this happens before the input address is used (line 8 to mask off the low bits for the TLB comparison, and line 12 to add the host-guest offset). If the input address (addrl) also happens to have been placed in v0 (as in the second column below), it gets clobbered before it is used. addrl in t2 addrl in v0 1 srl a0,t2,0x7 srl a0,v0,0x7 2 andi a0,a0,0x1fe0 andi a0,a0,0x1fe0 3 addu a0,a0,s0 addu a0,a0,s0 4 lw at,9136(a0) lw at,9136(a0) set TCG_TMP0 (at) 5 lw v0,9140(a0) lw v0,9140(a0) set base (v0) 6 li t9,-4093 li t9,-4093 7 lw a0,9160(a0) lw a0,9160(a0) set addend (a0) 8 and t9,t9,t2 and t9,t9,v0 use addrl 9 bne at,t9,0x836d8c8 bne at,t9,0x836d838 use TCG_TMP0 10 nop nop 11 bne v0,t8,0x836d8c8 bne v0,a1,0x836d838 use base 12 addu v0,a0,t2 addu v0,a0,v0 use addrl, addend 13 lw t0,0(v0) lw t0,0(v0) Fix by using TCG_TMP0 (at) as the temporary instead of v0 (base), pushing the load on line 5 forward into the delay slot of the low comparison (line 10). The early load of the addend on line 7 also needs pushing even further for 64-bit targets, or it will clobber a0 before we're done with it. The output for 32-bit targets is unaffected. srl a0,v0,0x7 andi a0,a0,0x1fe0 addu a0,a0,s0 lw at,9136(a0) -lw v0,9140(a0) load high comparator li t9,-4093 -lw a0,9160(a0) load addend and t9,t9,v0 bne at,t9,0x836d838 - nop + lw at,9140(a0) load high comparator +lw a0,9160(a0) load addend -bne v0,a1,0x836d838 +bne at,a1,0x836d838 addu v0,a0,v0 lw t0,0(v0) Cc: qemu-stable@nongnu.org Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2015-08-24linux-user: remove useless macros GUEST_BASE and RESERVED_VALaurent Vivier
As we have removed CONFIG_USE_GUEST_BASE, we always use a guest base and the macros GUEST_BASE and RESERVED_VA become useless: replace them by their values. Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1440420834-8388-1-git-send-email-laurent@vivier.eu> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-01tcg/mips: fix add2Aurelien Jarno
The add2 code in the tcg_out_addsub2 function doesn't take into account the case where rl == al == bl. In that case we can't compute the carry after the addition. As it corresponds to a multiplication by 2, the carry bit is the bit 31. While this is a corner case, this prevents x86-64 guests to boot on a MIPS host. Cc: qemu-stable@nongnu.org Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2015-08-01tcg/mips: Mask TCGMemOp appropriately for indexingAurelien Jarno
Commit 2b7ec66f fixed TCGMemOp masking following the MO_AMASK addition, but two cases were forgotten in the TCG MIPS backend. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-23 18:49:36 +0000