aboutsummaryrefslogtreecommitdiff
path: root/target-xtensa
AgeCommit message (Collapse)Author
2011-10-16target-xtensa: remove hand-written xtensa cores implementationsMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16target-xtensa: increase xtensa options accuracyMax Filippov
- add separate options for each operation in the MISC_OP; - add an option for MULSH/MULUH; - put S32C1I under conditional store option. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-15target-xtensa: implement MAC16 optionMax Filippov
See ISA, 4.3.7 for the details. - add ACC and MR special registers; - implement MAC16 and all inner MAC* opcode groups. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-15target-xtensa: fix guest hang on masked CCOMPARE interruptMax Filippov
QEMU timer is used to post CCOMPARE interrupt when the core is halted. If that CCOMPARE interrupt is masked off then the timer must be rearmed in the callback, otherwise it will be rearmed next time the core goes to halt by the waiti instruction. Add test case into timer testsuite. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-01softmmu_header: pass CPUState to tlb_fillBlue Swirl
Pass CPUState pointer to tlb_fill() instead of architecture local cpu_single_env hacks. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: add dc232b core and boardMax Filippov
This is Diamond 232L Standard Core Rev.B (LE). Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement boolean optionMax Filippov
See ISA, 4.3.9 Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement memory protection optionsMax Filippov
- TLB opcode group; - region protection option (ISA, 4.6.3); - region translation option (ISA, 4.6.4); - MMU option (ISA, 4.6.5). Cache control attribute bits are not used by this implementation. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: add gdb supportMax Filippov
Specific xtensa processor overlay for GDB contains register map in the gdb/xtensa-config.c. This description is used by the GDB to e.g. parse 'g' response packets and it may be reused in the qemu's gdbstub (only XTREG definitions for non-pseudoregisters are needed). Currently mainline GDB does not support operations with privileged SRs (see http://sourceware.org/ml/gdb/2011-07/msg00075.html). This support may be enabled, see NUM_CORE_REGS comment in the gdbstub.c Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement relocatable vectorsMax Filippov
See ISA, 4.4.3 for details. Vector addresses recorded in core configuration are absolute values that correspond to default VECBASE value. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement CPENABLE and PRID SRsMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement accurate window checkMax Filippov
See ISA, 4.7.1.3 for details. Window check is inserted before commands that push "used register watermark" beyond its current level. Used register watermark is reset on instructions that change WINDOW_BASE/WINDOW_START SRs. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement interrupt optionMax Filippov
See ISA, 4.4.6 (interrupt option), 4.4.7 (high priority interrupt option) and 4.4.8 (timer interrupt option) for details. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement SIMCALLMax Filippov
Tensilica iss provides support for applications running in freestanding environment through SIMCALL command. It is used by Tensilica libc to access argc/argv, for file I/O, etc. Note that simcalls that accept buffer addresses expect virtual addresses. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement unaligned exception optionMax Filippov
See ISA, 4.4.4 for details. Correct (aligned as per ISA) address for unaligned access is generated in case this option is not enabled. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement extended L32RMax Filippov
See ISA, 4.3.3 for details. TB flag XTENSA_TBFLAG_LITBASE is used to track enable bit of LITBASE SR. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement loop optionMax Filippov
See ISA, 4.3.2 for details. Operations that change LEND SR value invalidate TBs at the old and at the new LEND. LEND value at TB compilation time is considered constant and loop instruction is generated based on this value. Invalidation may be avoided for the TB at the old LEND address, since looping code verifies actual LEND value. Invalidation may be avoided for the TB at the new LEND address if there's a way to associate LEND address with TB at compilation time and later verify that it doesn't change. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement windowed registersMax Filippov
See ISA, 4.7.1 for details. Physical registers and currently visible window are separate fields in CPUEnv. Only current window is accessible to TCG. On operations that change window base helpers copy current window to and from physical registers. Window overflow check described in 4.7.1.3 is in separate patch. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement RST2 group (32 bit mul/div/rem)Max Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement exceptionsMax Filippov
- mark privileged opcodes with ring check; - make debug exception on exception handler entry. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: add PS register and access controlMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement CACHE groupMax Filippov
All operations in this group are no-ops, because cache ought to be transparent to applications. However cache may be abused, then we'll need to actually implement these opcodes. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement SYNC groupMax Filippov
All operations in this group are no-ops, because there are no delayed side effects. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: mark reserved and TBD opcodesMax Filippov
Reserved opcodes must generate illegal instruction exception. Usually they signal emulation quality problems. Not implemented opcodes are good to see. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement LSAI groupMax Filippov
- base + offset load/store operations for 1/2/4 byte values; - cache operations (not implemented); - multiprocessor synchronization operations. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement shifts (ST1 and RST1 groups)Max Filippov
- ST1: SAR (shift amount special register) manipulation, NSA(U); - RST1: shifts, 16-bit multiplication. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement RST3 groupMax Filippov
- access to Special Registers (wsr, rsr); - access to User Registers (wur, rur); - misc. operations option (value clamp, sign extension, min, max); - conditional moves. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: add special and user registersMax Filippov
Special Registers hold the majority of the state added to the processor by the options. See ISA, 5.3 for details. User Registers hold state added in support of designer's TIE and in some cases of options that Tensilica provides. See ISA, 5.4 for details. Only registers mapped in sregnames or uregnames are considered valid. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement JX/RET0/CALLXMax Filippov
Group SNM0 (indirect jumps and calls). Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement conditional jumpsMax Filippov
- BZ (comparison to zero); - BI0 (comparison to signed immediate); - BI1 (comparison to unsigned immediate); - B (two registers comparison, bit sets comparison); - BEQZ.N/BNEZ.N (narrow comparison to zero). Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement RT0 groupMax Filippov
NEG and ABS are the only members of RT0 group. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement narrow instructionsMax Filippov
Instructions with op0 >= 8 are 2 bytes long, others are 3 bytes long. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement disas_xtensa_insnMax Filippov
Set up disas_xtensa_insn switch structure, mark required options on high level groups. Implement arithmetic/bit logic/jump/call0. Implement code generation loop with single step/breakpoint checking. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: add target stubsMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-13 10:06:49 +0000