| Age | Commit message (Collapse) | Author |
|---|
|
.. and enable it on POWER7 CPU.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
In addition to the performance monitor registers found on nearly all
6xx chips, the POWER7 has two additional counters (PMC5 & PMC6) and an
extra control register (MMCRA). This patch adds stub support for them to
qemu - the registers won't do anything, but with this change won't cause
illegal instruction traps accessing them. They're also registered with
their ONE_REG ids, so their value will be kept in sync with KVM where
appropriate.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
PAPR requires that the device tree's CPU nodes have several properties
with information about the L1 cache. We already create two of these
properties, but with incorrect names - "[id]cache-block-size" instead
of "[id]-cache-block-size" (note the extra hyphen).
We were also missing some of the required cache properties. This
patch adds the [id]-cache-line-size properties (which have the same
values as the block size properties in all current cases). We also
add the [id]-cache-size properties.
Adding the cache sizes requires some extra infrastructure in the
general target-ppc code to (optionally) set the cache sizes for
various CPUs. The CPU family descriptions in translate_init.c can set
these sizes - this patch adds correct information for POWER7, I'm
leaving other CPU types to people who have a physical example to
verify against. In addition, for -cpu host we take the values
advertised by the host (if available) and use those to override the
information based on PVR.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
According to the different user's manuals, the vector offset for system
reset (both /HRESET and /SRESET) is 0x00100.
This patch may break support of some executables, as the power-on start
address may change. For a specific board, if the power-on start address
is different than HRESET vector (i.e. 0x00000100 or 0xfff00100), this
should be fixed in board's initialization code.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This value is not needed if we use correctly the MSR[IP] bit.
excp_prefix is always 0x00000000, except when the MSR[IP] bit is
implemented and set to 1, in that case excp_prefix is 0xfff00000.
The handling of MSR[IP] was already implemented but not used at reset
because the value of env->msr was changed "manually".
The patch uses the function hreg_store_msr() to set env->msr, this
ensures a good handling of MSR[IP] at reset, and therefore a good value
for excp_prefix.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
ISEL is a Power ISA 2.06 instruction and thus is available on POWER7.
Given this is trapped and emulated by the Linux kernel, I guess it went
unnoticed.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
After previous cleanups, the many scattered checks of env->mmu_model in
the ppc MMU implementation have, at least for "classic" hash MMUs been
reduced (almost) to a single switch at the top of
cpu_ppc_handle_mmu_fault().
An explicit switch is still a pretty ugly way of handling this though. Now
that Andreas Färber's CPU QOM cleanups for ppc have gone in, it's quite
straightforward to instead make the handle_mmu_fault function a QOM method
on the CPU object.
This patch implements such a scheme, initializing the method pointer at
the same time as the mmu_model variable. We need to keep the latter around
for now, because of the MMU types (BookE, 4xx, et al) which haven't been
converted to the new scheme yet, and also for a few other uses. It would
be good to clean those up eventually.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Version 2.06 of the Power architecture describes an additional page
protection mechanism. Each virtual page has a "class" (0-31) recorded in
the PTE. The AMR register contains bits which can prohibit reads and/or
writes on a class by class basis. Interestingly, the AMR is userspace
readable and writable, however user mode writes are masked by the contents
of the UAMOR which is privileged.
This patch implements this protection mechanism, along with the AMR and
UAMOR SPRs. The architecture also specifies a hypervisor-privileged AMOR
register which masks user and supervisor writes to the AMR and UAMOR. We
leave this out for now, since we don't at present model hypervisor mode
correctly in any case.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: fix 32-bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The PowerPC 620 was the very first 64-bit PowerPC implementation, but
hardly anyone ever actually used the chips. qemu notionally supports the
620, but since we don't actually have code to implement the segment table,
the support is broken (quite likely in other ways too).
This patch, therefore, removes all remaining pieces of 620 support, to
stop it cluttering up the platforms we actually care about. This includes
removing support for the ASR register, used only on segment table based
machines.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Although the support of this register may be uncomplete, there are no
reason to prevent the debugger from reading or writing it.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This removes a global per-target function and thus takes us one step
closer to compiling multiple targets into one executable.
It will also allow to override the interrupt handling for certain CPU
families.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Move array of CPU aliases to cpu-models.c, alongside model definitions.
This requires to zero-terminate the aliases array since ARRAY_SIZE() can
no longer be used in translate_init.c then.
Suggested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The QMP query-cpu-definitions implementation iterated over CPU classes
only, which were getting less and less as aliases were extracted.
Keep them in QMP as valid -cpu arguments even if not guaranteed stable.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Revert adding a separate -cpu ? output section for aliases and list them
per CPU subclass.
Requested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This avoids assigning individual class fields and contributors
forgetting to add field assignments in KVM-only code.
ppc_cpu_class_find_by_pvr() requires the CPU model classes to be
registered, so defer host CPU type registration to kvm_arch_init().
Only register the host CPU type if there is a class with matching PVR.
This lets us drop error handling from instance_init.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
A victim of the d523dd00a7d73b28f2e99acf45a4b3f92e56e40a AREG0
conversion, insert the missing cpu_env arguments.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Currently when runing under KVM on ppc, we synchronize a certain number of
vital SPRs to KVM through the SET_SREGS call. This leaves out quite a lot
of important SPRs which are maintained in KVM. It would be helpful to
have their contents in qemu for debugging purposes, and when we implement
migration it will be vital, since they include important guest state that
will need to be restored on the target.
This patch sets up for synchronization of any registers supported by the
KVM ONE_REG calls. A new variant on spr_register() allows a ONE_REG id to
be stored with the SPR information. When we set/get information to KVM
we also synchronize any SPRs so registered.
For now we set this mechanism up to synchronize a handful of important
registers that already have ONE_REG IDs, notably the DAR and DSISR.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Let it resolve to v2.3 rather than v2.0.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Now that model definitions only reference their parent type, model
definitions are independent of the family definitions and can be
compiled independently of TCG translation.
Keep all #if defined(TODO) code local to cpu-models.c.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Drop the space in #if defined (TODO).
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Fix microcontroller typo while at it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This gets rid of some more overly long comments that have lost most of
their purpose now that in most cases there's only two functions left per
CPU family.
The class field is inherited by the actual CPU models, so override it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Now POWERPC_DEF_SVR() no longer sets family-specific fields itself.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Don't attempt to suppress registration of CPU types, since the criteria
is actually a property of the class and should thus become a field.
Since we can't check a field set in a class_init function before
registering the type that leads to execution of that function, guard the
-cpu class lookup instead and suppress exposing these classes in -cpu ?
and in QMP.
In case someone tries to hot-add an incompatible CPU via device_add,
error out in realize.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Instead of assigning *_<family> constants, set .parent to a family type.
Introduce a POWERPC_FAMILY() macro to keep type registration close to
its implementation. This macro will need tweaking later.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Turn the array of model definitions into a set of self-registering QOM
types with their own class_init. Unique identifiers are obtained from
the combination of PVR, SVR and family identifiers; this requires all
alias #defines to be removed from the list. Possibly there are some more
left after this commit that are not currently being compiled.
Prepares for introducing abstract intermediate CPU types for families.
Keep the right-aligned macro line breaks within 78 chars to aid
three-way merges.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
We are about to drop the redundant name field along with ppc_def_t.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This depends on the fix for "G2leGP3" PVR.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
