aboutsummaryrefslogtreecommitdiff
path: root/target-m68k/op_helper.c
AgeCommit message (Collapse)Author
2015-06-22m68k: fix usp processing on interrupt entry and exception exitGreg Ungerer
The action to potentially switch sp register is not occurring at the correct point in the interrupt entry or exception exit sequences. For the interrupt entry case the sp on entry is used to create the stack exception frame - but this may well be the user stack pointer, since we haven't done the switch yet. Re-order the flow to switch the sp regs then use the current sp to create the exception frame. For the return from exception case the code is unwinding the sp after switching sp registers. But it should always unwind the supervisor sp first, then carry out any required sp switch. Note that these problems don't effect operation unless the user sp bit is set in the CACR register. Only a single sp is used in the default power up state. Previously Linux only used this single sp mode. But modern versions of Linux use the user sp mode now, so we need correct behavior for Linux to work. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Tested-by: Laurent Vivier <laurent@vivier.eu> Message-id: 1434721406-25288-4-git-send-email-gerg@uclinux.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19semihosting: create SemihostingConfig structure and semihost.hLeon Alrae
Remove semihosting_enabled and semihosting_target and replace them with SemihostingConfig structure containing equivalent fields. The structure is defined in vl.c where it is actually set. Also introduce separate header file include/exec/semihost.h allowing to access semihosting config related stuff from target specific semihosting code. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1434643256-16858-2-git-send-email-leon.alrae@imgtec.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-25target-m68k: Use cpu_exec_interrupt qom hookRichard Henderson
Since do_interrupt_m68k_hardirq is no longer used outside op_helper.c, make it static. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1410626734-3804-10-git-send-email-rth@twiddle.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-05softmmu: introduce cpu_ldst.hPaolo Bonzini
This will collect all load and store helpers soon. For now it is just a replacement for softmmu_exec.h, which this patch stops including directly, but we also include it where this will be necessary in order to simplify the next patch. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-05softmmu: commonize helper definitionsPaolo Bonzini
They do not need to be in op_helper.c. Because cputlb.c now includes softmmu_template.h twice for each size, io_readX must be elided the second time through. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-28tcg: Invert the inclusion of helper.hRichard Henderson
Rather than include helper.h with N values of GEN_HELPER, include a secondary file that sets up the macros to include helper.h. This minimizes the files that must be rebuilt when changing the macros for file N. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-03-13translate-all: Change cpu_restore_state() argument to CPUStateAndreas Färber
This lets us drop some local variables in tlb_fill() functions. Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu-exec: Change cpu_loop_exit() argument to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13exec: Change tlb_fill() argument to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu: Move exception_index field from CPU_COMMON to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu: Turn cpu_handle_mmu_fault() into a CPUClass hookAndreas Färber
Note that while such functions may exist both for *-user and softmmu, only *-user uses the CPUState hook, while softmmu reuses the prototype for calling it directly. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-10-10target-m68k: Rename helpers.h to helper.hRichard Henderson
This brings the m68k target in line with all other targets. Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-03-12cpu: Replace do_interrupt() by CPUClass::do_interrupt methodAndreas Färber
This removes a global per-target function and thus takes us one step closer to compiling multiple targets into one executable. It will also allow to override the interrupt handling for certain CPU families. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-12cpu: Move halted and interrupt_request fields to CPUStateAndreas Färber
Both fields are used in VMState, thus need to be moved together. Explicitly zero them on reset since they were located before breakpoints. Pass PowerPCCPU to kvmppc_handle_halt(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19exec: move include files to include/exec/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-16exec: refactor cpu_restore_stateBlue Swirl
Refactor common code around calls to cpu_restore_state(). tb_find_pc() has now no external users, make it static. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-15Remove unused CONFIG_TCG_PASS_AREG0 and dead codeBlue Swirl
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets, remove dead code and support for !CONFIG_TCG_PASS_AREG0 case. Remove dyngen-exec.h and all references to it. Although included by hw/spapr_hcall.c, it does not seem to use it. Remove unused HELPER_CFLAGS. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-09-15target-m68k: switch to AREG0 free modeBlue Swirl
Add an explicit CPUState parameter instead of relying on AREG0 and switch to AREG0 free mode. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-14Use uintptr_t for various op related functionsBlue Swirl
Use uintptr_t instead of void * or unsigned long in several op related functions, env->mem_io_pc and GETPC() macro. Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-14target-m68k: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUM68KState/g" target-m68k/*.[hc] sed -i "s/#define CPUM68KState/#define CPUState/" target-m68k/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-01softmmu_header: pass CPUState to tlb_fillBlue Swirl
Pass CPUState pointer to tlb_fill() instead of architecture local cpu_single_env hacks. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-07Remove unused is_softmmu parameter from cpu_handle_mmu_faultBlue Swirl
Parameter is_softmmu (and its evil mutant twin brother is_softmuu) is not used in cpu_*_handle_mmu_fault() functions, remove them and adjust callers. Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-30exec.h cleanupBlue Swirl
Move softmmu_exec.h include directives from target-*/exec.h to target-*/op_helper.c. Move also various other stuff only used in op_helper.c there. Define global env in dyngen-exec.h. For i386, move wrappers for segment and FPU helpers from user-exec.c to op_helper.c. Implement raise_exception_err_env() to handle dynamic CPUState. Move the function declarations to cpu.h since they can be used outside of op_helper.c context. LM32, s390x, UniCore32: remove unused cpu_halted(), regs_to_env() and env_to_regs(). ARM: make raise_exception() static. Convert #include "exec.h" to #include "cpu.h" #include "dyngen-exec.h" and remove now unused target-*/exec.h. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26m68k: use caller supplied CPUState for interrupt related stuffBlue Swirl
Pass CPUState to do_interrupt(). This is needed by later patches. It would be cleaner to move the function to helper.c, but there are a few dependencies between do_interrupt() and other functions. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26cpu_loop_exit: avoid using AREG0Blue Swirl
Make cpu_loop_exit() take a parameter for CPUState instead of relying on global env. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-04-20Remove unused function parameter from cpu_restore_stateStefan Weil
The previous patch removed the need for parameter puc. Is is now unused, so remove it. Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Weil <weil@mail.berlios.de>
2009-07-16Update to a hopefully more future proof FSF addressBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-01-04Update FSF address in GPL/LGPL boilerplateaurel32
The attached patch updates the FSF address in the GPL/LGPL boilerplate in most GPL/LGPLed files, and also in COPYING.LIB. Signed-off-by: Stuart Brady <stuart.brady@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6162 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-13Remove unnecessary trailing newlinesblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6000 c046a42c-6fe2-441c-8c8c-71466251a162
2008-07-03Convert remaining __builtin_expect to likely/unlikely, by Jan Kiszka.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4840 c046a42c-6fe2-441c-8c8c-71466251a162
2008-05-25Fix off-by-one unwinding error.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4570 c046a42c-6fe2-441c-8c8c-71466251a162
2008-05-24Convert m68k target to TCG.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4565 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-11fixed invalid typebellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3582 c046a42c-6fe2-441c-8c8c-71466251a162
2007-10-29Adjust s390 addresses (the MSB is defined as "to be ignored").ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3486 c046a42c-6fe2-441c-8c8c-71466251a162
2007-10-14Replace is_user variable with mmu_idx in softmmu core,j_mayer
allowing support of more than 2 mmu access modes. Add backward compatibility is_user variable in targets code when needed. Implement per target cpu_mmu_index function, avoiding duplicated code and #ifdef TARGET_xxx in softmmu core functions. Implement per target mmu modes definitions. As an example, add PowerPC hypervisor mode definition and Alpha executive and kernel modes definitions. Optimize PowerPC case, precomputing mmu_idx when MSR register changes and using the same definition in code translation code. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3384 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-16find -type f | xargs sed -i 's/[\t ]$//g' # on most filesths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
2007-06-09M68K status register fixes.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2967 c046a42c-6fe2-441c-8c8c-71466251a162
2007-06-03MCF5208 emulation.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2924 c046a42c-6fe2-441c-8c8c-71466251a162
2007-06-02Clear SR_M on a hardware interrupt.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2922 c046a42c-6fe2-441c-8c8c-71466251a162
2007-05-26M68k system mode semihosting.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2861 c046a42c-6fe2-441c-8c8c-71466251a162
2007-05-23m68k/ColdFire system emulation.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2851 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-14 17:48:03 +0000