| Age | Commit message (Collapse) | Author |
|---|
|
Convert code load functions and switch to AREG0 free mode.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Report from smatch:
target-arm/helper.c:651 arm946_prbs_read(6) error:
buffer overflow 'env->cp15.c6_region' 8 <= 8
target-arm/helper.c:661 arm946_prbs_write(6) error:
buffer overflow 'env->cp15.c6_region' 8 <= 8
c7_region is an array with 8 elements, so the index must be less than 8.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Fix a variety of typos in comments in target-arm files.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
Implement the actual table walk code for LPAE's long format
translation tables.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Implement the changes to the TTBCR register required for LPAE:
* many fewer bits should be RAZ/WI
* since TTBCR changes can result in a change of ASID, we must
flush the TLB on writes to it
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Implement the different format of the PAR when long descriptor
translation tables are in use. Note that we assume that
get_phys_addr() returns a long-descriptor format DFSR value on
failure if long descriptors are in use; this added subtlety tips
the balance and makes it worth adding a comment documenting the
API to get_phys_addr().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
In the implementation of get_phys_addr(), consistently use
target_phys_addr_t to hold the physical address rather than
uint32_t.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Under LPAE, the cp15 registers PAR, TTBR0 and TTBR1 are extended
to 64 bits, with a 64 bit (MRRC/MCRR) access path to read the
full width of the register. Add the state fields for the top
half and the 64 bit access path. Actual use of the top half of
the register will come with the addition of the long-descriptor
translation table format support.
For the PAR we also need to correct the masking applied for
32 bit writes (there are no bits reserved if LPAE is implemented)
and clear the high half when doing a 32 bit result VA-to-PA
lookup.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
LPAE extends the DBGDRAR and DBGDSAR debug registers to 64 bits; we
only implement these as dummy RAZ versions; provide dummies for
the 64 bit accesses as well.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add implementations of the AMAIR0 and AMAIR1 LPAE
Auxiliary Memory Attribute Indirection Registers.
These are implementation defined and we choose to
implement them as RAZ/WI, matching the Cortex-A7
and Cortex-A15.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Implement the privileged-execute-never (PXN) translation table bit.
It is implementation-defined whether this is implemented, so we give
it its own ARM_FEATURE_ flag. LPAE requires PXN, so add also an
LPAE feature flag and the implication logic, as a placeholder
for actually implementing LPAE at a later date.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Fix a couple of cases where cp register names were copy-and-pasted.
These are harmless since we don't use the name for anything (except
debugging convenience) but could be confusing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
|
|
Fix a copy-and-paste error in the register description for TTBR1
that meant it was a duplicate of TTBR0 rather than affecting the
correct bit of CPU state.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
There are now no uses of the old cp15 infrastructure,
so it can be deleted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Move the v6 optional block cache ops to the new cp15 framework.
This includes only providing them on the CPUs which implemented
them, rather than the previous blunderbuss approach of making
all MCRR instructions on all CPUs act as NOPs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert the final ID registers to the new cp15 scheme.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert the MPIDR to the new cp15 register scheme.
This includes giving it its own feature bit rather
than doing a CPUID value check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert the cp15 cache ID registers to the new scheme.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert the cp15 crn=0 crm={1,2} features registers to
the new cp reg framework.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert the cp15 crn=1 registers to the new scheme.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert cp15 crn=9 registers (mostly cache lockdown) to the new scheme.
Note that this change makes OMAPCP cores RAZ/WI the whole c9 space. This is
a change from previous behaviour, but a return to the behaviour of commit
c3d2689d when OMAP1 support was first added -- subsequent commits have
clearly accidentally relegated the OMAPCP RAZ condition to only a subset of
the crn=9 space when adding support for other cores.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert the cp15 crn=6 registers to the new scheme.
Note that this includes some minor tidyup: drop an unnecessary
underdecoding of op2 on OMAPCP cores, and only implement the
pre-v6 c6,c0,0,1 IFAR on the 1026 and not on the other ARMv5
cores, which didn't have it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert the cp15 crn=7 registers to the new scheme.
Note that to do this we have to distinguish some registers
used on the ARM9 and ARM10 from some which are ARM1176
only. This is because the old code returned a value of 0
but always set the Z flag (by clearing env->ZF, since we
store the Z flag in CPUState inverted). This is inconsistent
with actual ARM CPU behaviour, which only sets flags for
reads to r15 and sets them based on the top bits of the result.
However it happened to work for the two common use cases for
cp15 crn=7 reads:
* On ARM9 and ARM10 the cache clean-and-test operations are
typically done with a destination of r15 so that you can do
a "loop: mrc ... ; bne loop" to keep cleaning until the cache
is finally clean; always setting the Z flag means this loop
terminates immediately
* on ARM1176 the Cache Dirty Status Register reads as zero
if the cache is dirty; returning 0 means this is correctly
implemented for QEMU
Since the new coprocessor register framework does the right
thing of always setting flags based on the returned result
for reads to r15, we need to split these up so that we can
return (1<<30) for the ARM9/ARM10 registers but 0 for the
ARM1176 one.
This allows us to remove the nasty hack which always sets Z.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert the cp15 VA-PA translation registers (a subset of
the crn=7 regs) to the new scheme.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert cp15 MMU TLB control (crn=8) to new scheme.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert the cp15 crn=15 (implementation specific) registers
to the new scheme.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
We RAZ/WI the entire block of crn=10 registers. Note that this
actually covers not just the implementation-defined TLB
lockdown registers but also a number of v7 VMSA memory
attribute registers which we would need to implement to
support TEX remap. We retain the previous QEMU behaviour
in this conversion, though.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert the cp15 crn=13 registers (FCSEIDR, CONTEXTIDR,
and the ARM946 Trace Process Identifier Register).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert the cp15 crn=2 registers (MMU page table control,
MPU cache control) to the new scheme.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert the MMU fault status and MPU access permission cp15
registers to the new scheme.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert the cp15 c3 register (MMU domain access control
or MPU write buffer control). NB that this is horribly
underdecoded for modern cores (should be crn=3,crm=0,
opc1=0,opc2=0) but this change preserves the existing
QEMU behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert the (dummy) generic timer cp15 implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert the v7 performance monitor cp15 registers to
the new scheme.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert TLS registers to the new cp15 framework
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert the various WFI and barrier instruction special cases to use
cp_reginfo infrastructure.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert the THUMB2EE cp14 registers TEECR and TEEHBR to
use arm_cp_reginfo.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Convert the cp14 debug registers (DBGDIDR, DBGDRAR, DBGDSAR) to the
cp_reginfo scheme.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add new function register_cp_regs_for_features() as a place to
register coprocessor registers dependent on feature flags.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
All the users of cpu_arm_set_cp_io have been converted, so we
can remove it and the infrastructure it used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Initial infrastructure for data-driven registration of
coprocessor register implementations.
We still fall back to the old-style switch statements pending
complete conversion of all existing registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
In commit 1bba0dc932e8826a7d030df3767daf0bc339f9a2 cpu_reset()
was renamed to cpu_state_reset(), to allow introducing a new cpu_reset()
that would operate on QOM objects.
All callers have been updated except for one in target-mips, so drop all
implementations except for the one in target-mips and move the
declaration there until MIPSCPU reset can be fully QOM'ified.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> (for mb + cris)
Acked-by: Alexander Graf <agraf@suse.de> (for ppc)
Acked-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Commit 3c30dd5a68e9fee6af67cfd0d14ed7520820f36a (target-arm: Move reset
handling to arm_cpu_reset) QOM'ified CPU reset. Complete it by replacing
cpu_state_reset() with cpu_reset().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Make cpu_arm_init() return a QOM ARMCPU, so that we don't need to
obtain an ARMCPU through arm_env_get_cpu() in machine init code.
This requires to adjust the inclusion site of cpu-qom.h and in turn,
forward-looking, to homogenize its include order.
cpu_init() must still return a CPUARMState for backwards and
cross-target compatibility, so adjust the cpu_init macro.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Now that cpu_reset_model_id() has gone we can move the
reset code over to the class reset function and have cpu_state_reset
simply do a reset on the CPU QOM object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
|
|
cpu_reset_model_id() is now empty and we can remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
|
|
Move cache ID register reset out of cpu_reset_model_id() by
creating a field for the reset value in ARMCPU and setting it
up in the cpu specific init functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
|
|
Move the OMAP-specific cp15_i_{max,min} reset to cpu_state_reset;
since these registers are only accessible on CPUs with the
OMAPCP feature set there's no need to guard this reset with
either a CPUID or feature bit check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
|
|
Move feature register value setup to per-CPU init functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
|
|
Move the iWMMXT wCID reset to cpu_state_reset(). Since
we use the same value for all CPUs with this feature
(with the major/minor revision fields set to the QEMU
specific 'Q' value) there's no need to create an ARMCPU
field just for this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
|
|
None of the machines in QEMU offer a JTAG debug interface, so this info
was unused. Further, the PXA250 ID contradicts the February 2002
Developer's Manual, which has it as 0xn9264013 with n the MIDR Revision.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
