aboutsummaryrefslogtreecommitdiff
path: root/replay/replay-input.c
AgeCommit message (Collapse)Author
2016-07-06replay: Use new QAPI cloningEric Blake
Rather than rolling our own clone via an expensive conversion in and back out of QObject, use the new clone visitor. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-16-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06qapi: Add new visit_complete() functionEric Blake
Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06qmp-output-visitor: Favor new visit_free() functionEric Blake
Now that we have a polymorphic visit_free(), we no longer need qmp_output_visitor_cleanup(); however, we still need to expose the subtype for qmp_output_get_qobject(). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-10-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06qmp-input-visitor: Favor new visit_free() functionEric Blake
Now that we have a polymorphic visit_free(), we no longer need qmp_input_visitor_cleanup(); which in turn means we no longer need to return a subtype from qmp_input_visitor_new() nor a public upcast function. Generated code changes to qmp-marshal.c look like: |@@ -52,11 +52,10 @@ void qmp_marshal_add_fd(QDict *args, QOb | { | Error *err = NULL; | AddfdInfo *retval; |- QmpInputVisitor *qiv = qmp_input_visitor_new(QOBJECT(args), true); | Visitor *v; | q_obj_add_fd_arg arg = {0}; | |- v = qmp_input_get_visitor(qiv); |+ v = qmp_input_visitor_new(QOBJECT(args), true); | visit_start_struct(v, NULL, NULL, 0, &err); | if (err) { | goto out; Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-8-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-05-12qapi: Use strict QMP input visitor in more placesEric Blake
The following uses of a QMP input visitor should be strict (that is, excess keys in QDict input should be flagged if not converted to QAPI): - Testsuite code unrelated to explicitly testing non-strict mode (test-qmp-commands, test-visitor-serialization); since we want more code to be strict by default, having more tests of strict mode doesn't hurt - Code used for cloning QAPI objects (replay-input.c, qemu-sockets.c); we are reparsing a QObject just barely produced by the qmp output visitor and which therefore should not have any garbage, so while it is extra work to be strict, it validates that our clone is correct [note that a later patch series will simplify these two uses by creating an actual clone visitor that is much more efficient than a generate/reparse cycle] - qmp_object_add(), which calls into user_creatable_add_type(). Since command line parsing for '-object' uses the same user_creatable_add_type() through the OptsVisitor, and that is always strict, we want to ensure that any nested dictionaries would be treated the same in QMP and from the command line (I don't actually know if such nested dictionaries exist). Note that on this code change, strictness only matters for nested dictionaries (if even possible), since we already flag excess input at the top level during an earlier object_property_set() on an unknown key, whether from QemuOpts: $ ./x86_64-softmmu/qemu-system-x86_64 -nographic -nodefaults -qmp stdio -object secret,id=sec0,data=letmein,format=raw,foo=bar qemu-system-x86_64: -object secret,id=sec0,data=letmein,format=raw,foo=bar: Property '.foo' not found or from QMP: $ ./x86_64-softmmu/qemu-system-x86_64 -nographic -nodefaults -qmp stdio {"QMP": {"version": {"qemu": {"micro": 93, "minor": 5, "major": 2}, "package": ""}, "capabilities": []}} {"execute":"qmp_capabilities"} {"return": {}} {"execute":"object-add","arguments":{"qom-type":"secret","id":"sec0","props":{"format":"raw","data":"letmein","foo":"bar"}}} {"error": {"class": "GenericError", "desc": "Property '.foo' not found"}} The only remaining uses of non-strict input visits are: - QMP 'qom-set' (which eventually executes object_property_set_qobject()) - mark it as something to revisit in the future (I didn't want to spend any more time on this patch auditing if we have any QOM dictionary properties that might be impacted, and couldn't easily prove whether this code path is shared with anything else). - test-qmp-input-visitor: explicit tests of non-strict mode. If we later get rid of users that don't need strictness, then this test should be merged with test-qmp-input-strict Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-7-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-05-12qapi: Consolidate QMP input visitor creationEric Blake
Rather than having two separate ways to create a QMP input visitor, where the safer approach has the more verbose name, it is better to consolidate things into a single function where the caller must explicitly choose whether to be strict or to ignore excess input. This patch is the strictly mechanical conversion; the next patch will then audit which uses can be made stricter. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-6-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-18qapi: Don't special-case simple union wrappersEric Blake
Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-05ui: Shorten references into InputEventEric Blake
An upcoming patch will alter how simple unions, like InputEvent, are laid out, which will impact all lines of the form 'evt->u.XXX' (expanding it to the longer 'evt->u.XXX.data'). For better legibility in that patch, and less need for line wrapping, it's better to use a temporary variable to reduce the effect of a layout change to just the variable initializations, rather than every reference within an InputEvent. There was one instance in hid.c:hid_pointer_event() where the code was referring to evt->u.rel inside the case label where evt->u.abs is the correct name; thankfully, both members of the union have the same type, so it happened to work, but it is now cleaner. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1457021813-10704-8-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08qapi: Swap visit_* arguments for consistent 'name' placementEric Blake
JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-04all: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
2015-12-17qapi: Don't let implicit enum MAX member collideEric Blake
Now that we guarantee the user doesn't have any enum values beginning with a single underscore, we can use that for our own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious that the sentinel is generated. This patch was mostly generated by applying a temporary patch: |diff --git a/scripts/qapi.py b/scripts/qapi.py |index e6d014b..b862ec9 100644 |--- a/scripts/qapi.py |+++ b/scripts/qapi.py |@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = { | max_index = c_enum_const(name, 'MAX', prefix) | ret += mcgen(''' | [%(max_index)s] = NULL, |+// %(max_index)s | }; | ''', | max_index=max_index) then running: $ cat qapi-{types,event}.c tests/test-qapi-types.c | sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list $ git grep -l _MAX | xargs sed -i -f list The only things not generated are the changes in scripts/qapi.py. Rejecting enum members named 'MAX' is now useless, and will be dropped in the next patch. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> [Rebased to current master, commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-06replay: recording of the user inputPavel Dovgalyuk
This records user input (keyboard and mouse events) in record mode and replays these input events in replay mode. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150917162524.8676.11696.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>