| Age | Commit message (Collapse) | Author |
|---|
|
The file descriptor for /sys/power/state was never closed. Reported
by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
'driver' is leaked when the loop is not broken.
Leak introduced by commit 743c71d03c20d64f2bae5fba6f26cdf5e4b1bda6,
spotted by ASAN.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
bios_support_mode verifies if the guest has support for a certain
suspend mode but it doesn't inform back which suspend tool
provides it. The caller, guest_suspend, executes all suspend
strategies in order again.
After adding systemd suspend support, bios_support_mode now will
verify for support for systemd, then pmutils, then Linux sys state
file. In a worst case scenario where both systemd and pmutils isn't
supported but Linux sys state is:
- bios_supports_mode will check for systemd, then pmutils, then
Linux sys state. It will tell guest_suspend that there is support,
but it will not tell who provides it;
- guest_suspend will try to execute (and fail) systemd suspend,
then pmutils suspend, to only then use the Linux sys suspend.
The time spent executing systemd and pmutils suspend was wasted
and could be avoided, but only bios_support_mode knew it but
didn't inform it back.
A quicker approach is to nuke bios_supports_mode and control
whether we found support at all with a bool flag inside
guest_suspend. guest_suspend will search for suspend support
and execute it as soon as possible. If the a given suspend
mechanism fails, continue to the next. If no suspend
support is found, the "not supported" message is still being
sent back to the user.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
pmutils isn't being supported by newer OSes like Fedora 27
or Mint. This means that the only suspend option QGA offers
for these guests are writing directly into the Linux sys state
file. This also means that QGA also loses the ability to do
hybrid suspend in those guests - this suspend mode is only
available when using pmutils.
Newer guests can use systemd facilities to do all the suspend
types QGA supports. The mapping in comparison with pmutils is:
- pm-hibernate -> systemctl hibernate
- pm-suspend -> systemctl suspend
- pm-suspend-hybrid -> systemctl hybrid-sleep
To discover whether systemd supports these functions, we inspect
the status of the services that implements them.
With this patch, we can offer hybrid suspend again for newer
guests that do not have pmutils support anymore.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
This is a cleanup of the resulting code after detaching
pmutils and Linux sys state file logic:
- remove the SUSPEND_MODE_* macros and use an enumeration
instead. At the same time, drop the switch statements
at the start of each function and use the enumeration
index to get the right binary/argument;
- create a new function called run_process_child(). This
function uses g_spawn_sync() to execute a shell command,
returning the exit code. This is a common operation in the
pmutils functions and will be used in the systemd implementation
as well, so this function will avoid code repetition.
There are more places inside commands-posix.c where this new
run_process_child function can also be used, but one step
at a time.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
*check/propagate local_err before setting errp directly
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Following the same logic of the previous patch, let's also
decouple the suspend logic from guest_suspend into specialized
functions, one for each strategy we support at this moment.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
In bios_supports_mode there is a verification to assert if
the chosen suspend mode is supported by the pmutils tools and,
if not, we see if the Linux sys state files supports it.
This verification is done in the same function, one after
the other, and it works for now. But, when adding a new
suspend mechanism that will not necessarily follow the same
return 0 or 1 logic of pmutils, this code will be hard
to deal with.
This patch decouple the two existing logics into their own
functions, pmutils_supports_mode and linux_sys_state_supports_mode,
which in turn are used inside bios_support_mode. The existing
logic is kept but now it's easier to extend it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
To be able to add new suspend mechanisms we need to detach
the existing QMP functions from the current implementation
specifics.
At this moment we have functions such as qmp_guest_suspend_ram
calling bios_suspend_mode and guest_suspend passing the
pmutils command and arguments as parameters. This patch
removes this logic from the QMP functions, moving them to
the respective functions that will have to deal with which
binary to use.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Iterate over the PCI bridges to lookup the PCI device associated with
the block device.
This allows to lookup the driver under the following syspath:
/sys/devices/pci0000:00/0000:00:02.2/0000:03:00.0/virtio2/block/vda/vda3
It also works with an "old-style" Q35 libvirt hierarchy: root complex
-> DMI-PCI bridge -> PCI-PCI bridge -> virtio controller, ex:
/sys/devices/pci0000:00/0000:00:03.0/0000:01:01.0/0000:02:01.0/virtio1/block/vda/vda3
The setup can be reproduced with the following qemu command line
(Thanks Marcel for help):
qemu-system-x86_64 -M q35 \
-device i82801b11-bridge,id=dmi2pci_bridge,bus=pcie.0
-device pci-bridge,id=pci_bridge,bus=dmi2pci_bridge,addr=0x1,chassis_nr=1
-device virtio-blk-pci,scsi=off,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1,bus=pci_bridge,addr=0x1
For consistency with other syspath-related debug messages, replace a
\"%s\" in the message with '%s'.
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1567041
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
This patch adds support for getting the usage of mounted
filesystem.
The usage of fs stored as used_bytes and total_bytes.
It's very useful when we try to monitor guest's filesystem.
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
While reading file content via 'guest-file-read' command,
'qmp_guest_file_read' routine allocates buffer of count+1
bytes. It could overflow for large values of 'count'.
Add check to avoid it.
Reported-by: Fakhri Zulkifli <mohdfakhrizulkifli@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
If we set mountpoints to qmp_guest_fsfreeze_freeze_list,
we may got nothing to freeze as all mountpoints are
not valid.
So call ga_unset_frozen in this senario.
Also, if we return 0 frozen fs, there is no need to call
guest-fsfreeze-thaw.
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
basename(3) and dirname(3) modify their argument and may return
pointers to statically allocated memory which may be overwritten by
subsequent calls.
g_path_get_basename and g_path_get_dirname have no such issues, and
therefore more preferable.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Message-Id: <1519888086-4207-1-git-send-email-jusual@mail.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move qapi-schema.json to qapi/, so it's next to its modules, and all
files get generated to qapi/, not just the ones generated for modules.
Consistently name the generated files qapi-MODULE.EXT:
qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become
qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch].
This gets rid of the temporary hacks in scripts/qapi/commands.py,
scripts/qapi/events.py, and scripts/qapi/common.py.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Applied using the Coccinelle semantic patch scripts/coccinelle/use_osdep.cocci
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
|
|
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
|
|
we can get the network interface statistics inside a virtual machine by
guest-network-get-interfaces command. it is very useful for us tomonitor
and analyze network traffic.
Signed-off-by: ZhiPeng Lu <lu.zhipeng@zte.com.cn>
* don't rely on sizeof(wchar[]) for wchar[] indexing
* avoid camelCase variable names
* fix up getline() usage
* condensed commit subject line
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Add test for guest-get-osinfo command.
Qemu-ga was modified to accept QGA_OS_RELEASE environment variable. If
the variable is defined it is interpreted as path to the os-release file
and it is parsed instead of the default paths.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
* move declarations to beginning of functions
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Add a new 'guest-get-osinfo' command for reporting basic information of
the guest operating system. This includes machine architecture,
version and release of the kernel and several fields from os-release
file if it is present (as defined in [1]).
[1] https://www.freedesktop.org/software/systemd/man/os-release.html
Signed-off-by: Vinzenz Feenstra <vfeenstr@redhat.com>
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
* moved declarations to beginning of functions
* dropped unecessary initialization of struct utsname
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Commit 161a56a9065 added command guest-get-users and requires the
utmpx.h (defined by POSIX) to work. It is however not always available
(e.g. on OpenBSD) therefor a check for its existence is necessary.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
There is no need to duplicate a fixed string.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
static code analyzer complain:
qga/commands-posix.c:2127:9: warning: Null pointer passed as an argument to a 'nonnull' parameter
closedir(dp);
^~~~~~~~~~~~
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
A command that will list all currently logged in users, and the time
since when they are logged in.
Examples:
virsh # qemu-agent-command F25 '{ "execute": "guest-get-users" }'
{"return":[{"login-time":1490622289.903835,"user":"root"}]}
virsh # qemu-agent-command Win2k12r2 '{ "execute": "guest-get-users" }'
{"return":[{"login-time":1490351044.670552,"domain":"LADIDA",
"user":"Administrator"}]}
Signed-off-by: Vinzenz Feenstra <vfeenstr@redhat.com>
* make g_hash_table_contains compat func inline to avoid
unused warnings
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
In some cases the slave devices of a virtual block device are tracked
by the parent in the corresponding sysfs node. For instance, if we
have a loop-back mount of the form:
/dev/loop3p1 on /home/mdroth/mnt type ext4 (rw,relatime,data=ordered)
this will be reflected in sysfs as:
/sys/devices/virtual/block/loop3/
...
/sys/devices/virtual/block/loop3/slaves
/sys/devices/virtual/block/loop3/loop3p1
The current code however assumes the mounted virtual block device,
loop3p1 in this case, contains the slaves directory, and reports an
error otherwise. This breaks 'make check' in certain environments.
Fix this by simply skipping attempts to generate disk topology
information in these cases. Since this information is documented
in QAPI as optionally-reported, this should be ok from an API
perspective.
In the future, this can possibly be improved upon by collecting
topology information from the parent in these cases.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
|
|
the current implementation fails if we try to freeze an
already frozen filesystem. This can happen if a filesystem
is mounted more than once (e.g. with a bind mount).
Suggested-by: Christian Theune <ct@flyingcircus.io>
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Use Coccinelle script to replace 'ret = E; return ret' with
'return E'. The script will do the substitution only when the
function return type and variable type are the same.
Manual fixups:
* audio/audio.c: coding style of "read (...)" and "write (...)"
* block/qcow2-cluster.c: wrap line to make it shorter
* block/qcow2-refcount.c: change indentation of wrapped line
* target-tricore/op_helper.c: fix coding style of
"remainder|quotient"
* target-mips/dsp_helper.c: reverted changes because I don't
want to argue about checkpatch.pl
* ui/qemu-pixman.c: fix line indentation
* block/rbd.c: restore blank line between declarations and
statements
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unused Coccinelle rule name dropped along with a redundant comment;
whitespace touched up in block/qcow2-cluster.c; stale commit message
paragraph deleted]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Remove glib.h includes, as it is provided by osdep.h.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Magic constants are a pain to use, especially when we run the
risk that our choice of '1' for QGA_SEEK_CUR might differ from
the host or guest's choice of SEEK_CUR. Better is to use an
enum value, via a qapi alternate type for back-compatibility.
With this,
{"command":"guest-file-seek", "arguments":{"handle":1,
"offset":0, "whence":"cur"}}
becomes a synonym for the older
{"command":"guest-file-seek", "arguments":{"handle":1,
"offset":0, "whence":1}}
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-9-git-send-email-peter.maydell@linaro.org
|
|
Commit 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they
keep coming back. Tracked down with the Coccinelle semantic patch
from commit 312fd5f.
Cc: Fam Zheng <famz@redhat.com>
Cc: Peter Crosthwaite <crosthwaitepeter@gmail.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Changchun Ouyang <changchun.ouyang@intel.com>
Cc: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-17-git-send-email-armbru@redhat.com>
|
|
Switch from using g_base64_decode over to qbase64_decode
in order to get error checking of the base64 input data.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
|
|
Exposing OS-specific SEEK_ constants in our qapi was a mistake
(if the host has SEEK_CUR as 1, but the guest has it as 2, then
the semantics are unclear what should happen); if we had a time
machine, we would instead expose only a symbolic enum. It's too
late to change the fact that we have an integer in qapi, but we
can at least document what mapping we want to enforce for all
qga clients (and luckily, it happens to be the mapping that both
Linux and Windows use); then fix the code to match that mapping.
It also helps us filter out unsupported SEEK_DATA and SEEK_HOLE.
In the future, we may wish to move our QGA_SEEK_* constants into
qga/qapi-schema.json, along with updating the schema to take an
alternate type (either the integer, or the string value of the
enum name) - but that's too much risk during hard freeze.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
According to the specification:
http://pubs.opengroup.org/onlinepubs/9699919799/functions/fopen.html
"the application shall ensure that output is not directly followed by
input without an intervening call to fflush() or to a file positioning
function (fseek(), fsetpos(), or rewind()), and input is not directly
followed by output without an intervening call to a file positioning
function, unless the input operation encounters end-of-file."
Without this change, an fwrite() followed by an fread() may lose the
previously written content, as shown in the following test.
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1210246
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
* don't confuse {write,read}() with f{write,read}() in
commit msg (Laszlo)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
We'd better use generic qemu_set_nonblock directly.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
This just makes code shorter and better.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Some guests don't expose memory blocks via sysfs at all. This
shouldn't be a failure, instead just return an empty list. For
other access failures we still report an error.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Signed-off-by: Veres Lajos <vlajos@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
In order to avoid any confusion, let's allocate new strings when
splitting.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
It's possible to set system time with dates after 2070, however, it's
not possible to set the RTC. It has limitation to up to year
2070 (1970+100). In order to keep both clock in sync and before the
kernel complains on invalid values, bail out early.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
The current guest-fstrim support only returns an error if some
mountpoint was unable to be trimmed, skipping any possible additional
mountpoints. The result of the TRIM operation itself is also discarded.
This change returns a per mountpoint result of the TRIM operation. If an
error occurs on some mountpoints that error is returned and the
guest-fstrim continue with any additional mountpoints.
The returned values for errors, minimum and trimmed are dependant on the
filesystem, storage stacks and kernel version.
Signed-off-by: Justin Ossevoort <justin@quarantainenet.nl>
* s/type/struct/ in schema type definitions
* moved version annotation for new guest-fstrim return field to
the field itself rather than applying to the entire command
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
The FITRIM ioctl updates the fstrim_range structure it receives. This
way the caller can determine how many bytes were trimmed. The
guest-fstrim logic reuses the same fstrim_range for each filesystem,
effectively limiting each filesystem to trim at most as much as the
previous was able to trim.
If a previous filesystem would have trimmed 0 bytes, than the next
filesystem would report an error 'Invalid argument' because a FITRIM
request with length 0 is not valid.
This change resets the fstrim_range structure for each filesystem.
Signed-off-by: Justin Ossevoort <justin@quarantainenet.nl>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
It's detected by coverity. Close the dirfd.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
For memory block command, we only support for linux with sysfs.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
This conveys general information about guest memory blocks. Currently,
just the memory block size.
The size of a memory block is architecture dependent, it represents the logical
unit upon which memory online/offline operations are to be performed.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
*generalized guest-get-memory-block-size to get-get-memory-block-info
for future extensibility
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
We can change guest's online/offline state of memory blocks, by using
command 'guest-set-memory-blocks'.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
