aboutsummaryrefslogtreecommitdiff
path: root/qemu-doc.texi
AgeCommit message (Collapse)Author
2018-02-08docs: Add section for NVMe VFIO driverFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20180116060901.17413-9-famz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2018-01-27ppc: Deprecate qemu-system-ppcembthuth@redhat.com
qemu-system-ppcemb has been once split of qemu-system-ppc to support CPU page sizes < 4096 for some of the embedded 4xx PowerPC CPUs. However, there was hardly any OS available in the wild that really used such small page sizes (Linux uses 4096 on PPC), so there is no known recent use case for this separate build anymore. It's rather cumbersome to maintain a separate set of config switches for this, and it's wasting compile and test time of all the developers who have to build all QEMU targets to verify that their changes did not break anything. Except for the small CPU page sizes, qemu-system-ppc can be used as a full replacement for qemu-system-ppcemb since it contains all the embedded 4xx PPC boards and CPUs, too. Thus let's start the deprecation process for qemu-system-ppcemb to see whether somebody still needs the small page sizes or whether we could finally remove this unloved separate build. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-01-25ui: deprecate use of SDL 1.2 in favour of 2.0 seriesDaniel P. Berrange
The SDL 2.0 release was made in Aug, 2013: https://www.libsdl.org/release/ That will soon be 4 + 1/2 years ago, which is enough time to consider the 2.0 series widely supported. Thus we deprecate the SDL 1.2 support, which will allow us to delete it in the last release of 2018. By this time, SDL 2.0 will be more than 5 years old. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20180115142533.24585-1-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-12ui: deprecate use of GTK 2.x in favour of 3.x seriesDaniel P. Berrange
The GTK 3.0 release was made in Feb, 2011: https://blog.gtk.org/2011/02/10/gtk-3-0-released/ That will soon be 7 years ago, which is enough time to consider the 3.x series widely supported. Thus we deprecate the GTK 2.x support, which will allow us to delete it in the last release of 2018. By this time, GTK 3.x will be almost 8 years old. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20171212113440.16483-1-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-10hw/ppc: Remove the deprecated spapr-pci-vfio-host-bridge deviceThomas Huth
It's a deprecated dummy device since QEMU v2.6.0. That should have been enough time to allow the users to update their scripts in case they still use it, so let's remove this legacy code now. Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-01-08Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into stagingPeter Maydell
- Aneesh no longer listed in MAINTAINERS, - deprecation of the handle backend, - improved error reporting, especially when the local backend fails to open the VirtFS root, - virtio-9p-test to behave more like a real virtio guest driver: set DRIVER_OK when ready to use the device and process the used ring for completed requests, - cosmetic fixes (mostly coding style related). # gpg: Signature made Mon 08 Jan 2018 10:19:18 GMT # gpg: using RSA key 0x71D4D5E5822F73D6 # gpg: Good signature from "Greg Kurz <groug@kaod.org>" # gpg: aka "Gregory Kurz <gregory.kurz@free.fr>" # gpg: aka "[jpeg image of size 3330]" # Primary key fingerprint: B482 8BAF 9431 40CE F2A3 4910 71D4 D5E5 822F 73D6 * remotes/gkurz/tags/for-upstream: MAINTAINERS: Drop Aneesh as 9pfs maintainer 9pfs: deprecate handle backend fsdev: improve error handling of backend init fsdev: improve error handling of backend opts parsing tests: virtio-9p: set DRIVER_OK before using the device tests: virtio-9p: fix ISR dependence 9pfs: make pdu_marshal() and pdu_unmarshal() static functions 9pfs: fix error path in pdu_submit() 9pfs: fix type in *_parse_opts declarations 9pfs: handle: fix type definition 9pfs: fix some type definitions fsdev: fix some type definitions 9pfs: fix XattrOperations typedef virtio-9p: move unrealize/realize after virtio_9p_transport definition Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-08Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches # gpg: Signature made Fri 22 Dec 2017 14:09:01 GMT # gpg: using RSA key 0x7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (35 commits) block: Keep nodes drained between reopen_queue/multiple commit: Simplify reopen of base test-bdrv-drain: Test graph changes in drained section block: Allow graph changes in subtree drained section test-bdrv-drain: Recursive draining with multiple parents test-bdrv-drain: Test behaviour in coroutine context test-bdrv-drain: Tests for bdrv_subtree_drain block: Add bdrv_subtree_drained_begin/end() block: Don't notify parents in drain call chain test-bdrv-drain: Test nested drain sections block: Nested drain_end must still call callbacks block: Don't block_job_pause_all() in bdrv_drain_all() test-bdrv-drain: Test drain vs. block jobs blockjob: Pause job on draining any job BDS test-bdrv-drain: Test bs->quiesce_counter test-bdrv-drain: Test callback for bdrv_drain block: Make bdrv_drain() driver callbacks non-recursive block: Assert drain_all is only called from main AioContext block: Remove unused bdrv_requests_pending block: Mention -drive cyls/heads/secs/trans/serial/addr in deprecation chapter ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-089pfs: deprecate handle backendGreg Kurz
This backend raise some concerns: - doesn't support symlinks - fails +100 tests in the PJD POSIX file system test suite [1] - requires the QEMU process to run with the CAP_DAC_READ_SEARCH capability, which isn't recommended for security reasons This backend should not be used and wil be removed. The 'local' backend is the recommended alternative. [1] https://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2017-12-22block: Mention -drive cyls/heads/secs/trans/serial/addr in deprecation chapterThomas Huth
Looks like we forgot to announce the deprecation of these options in the corresponding chapter of the qemu-doc text, so let's do that now. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-12-22block: Remove the deprecated -hdachs optionThomas Huth
It's been marked as deprecated since QEMU v2.10.0, and so far nobody complained that we should keep it, so let's remove this legacy option now to simplify the code quite a bit. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-12-22block: Remove the obsolete -drive boot=on|off parameterThomas Huth
It's not working anymore since QEMU v1.3.0 - time to remove it now. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-12-22qemu-doc: Update the deprecation information of -tftp, -bootp, -redir and -smbThomas Huth
The information how to update the deprecated parameters was too scarce, so that some people did not update to the new syntax yet. Provide some more information to make sure that it is clear how to update from the old syntax to the new one. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-12-22net: Remove the legacy "-net channel" parameterThomas Huth
It has never been documented, so hardly anybody knows about this parameter, and it is marked as deprecated since QEMU v2.6. Time to let it go now. Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-12-21Remove legacy -no-kvm-pit optionThomas Huth
It's only printing a warning since QEMU v1.3.0, so nobody should use this anymore today. Let's get rid of this now. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1513619065-31722-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-20qemu-options qemu-doc: Move "Device URL Syntax" to qemu-docMarkus Armbruster
Commit 0f5314a (v1.0) added section "Device URL Syntax" to qemu-options.hx. It's enclosed in STEXI..ETEXI, thus affects only qemu-options.texi, not --help. It appears as a subsection under section "Invocation". Similarly, qemu.1 has it as a subsection under "OPTIONS". Commit f9dadc9 (v1.1.0) dropped new option -iscsi into the middle of this section. No effect on qemu-options.texi. It appears in --help run together with the "Bluetooth(R) options:" header. Commit c70a01e (v1.5.0) gives it is own heading in --help by moving commit 0f5314a's DEFHEADING(Device URL Syntax:) outside STEXI..ETEXI. Trouble is the heading makes no sense for -iscsi. Move all of the "Device URL Syntax" Texinfo to qemu-doc.texi. Mark it for inclusion in qemu.1 with '@c man begin NOTES'. This turns it into a separate section outside the list of options both in qemu-doc and in qemu.1. There's substantial overlap with the existing qemu-doc section "Disk Images". Mark with a TODO comment. Output of --help will be fixed next. Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20171002140307.5292-4-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> [Unwanted @node dropped]
2017-12-14s390x: deprecate s390-squash-mcss machine propHalil Pasic
With the cssids unrestricted (commit "s390x/css: unrestrict cssids") the s390-squash-mcss machine property should not be used. Actually Libvirt never supported this, so the expectation is that removing it should be pretty painless. But let's play nice and deprecate it first. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Message-Id: <20171206144438.28908-3-pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-12-14hmp-commands: Remove the deprecated usb_add and usb_delThomas Huth
It's easy to use device_add and device_del as replacement instead. The usb_add and usb_del commands are deprecated since QEMU 2.10, and nobody complained that they are still needed, so let's get rid of them now to make the HMP interface a little bit less overloaded. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1512073140-17672-1-git-send-email-thuth@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-11-27docs: Add image locking subsectionFam Zheng
This documents the image locking feature and explains when and how related options can be used. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-11-21Use HTTPS for qemu.org and other domainsStefan Hajnoczi
qemu.org enabled HTTPS in 2017 and it should be used instead of HTTP. There are also URLs to json.org, openvpn.net, and other domains that support HTTPS. This patch updates the qemu.org domains everywhere and also third-party domains that I have checked. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20171121120435.28728-3-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-13xlnx-zcu102: Add an info message deprecating the EP108Alistair Francis
The EP108 was an early access development board that is no longer used. Add an info message to convert any users to the ZCU102 instead. On QEMU they are both identical. This patch also updated the qemu-doc.texi file to indicate that the EP108 has been deprecated. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Emilio G. Cota <cota@braap.org> Message-id: 1510343626-25861-4-git-send-email-cota@braap.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-16qemu-doc.texi: remove trailing whitespaceMichael Tokarev
Remove trailing whitespace in qemu-doc.texi, as it causes reproducibility issues depending on the echo implementation used by the Makefile. Reported-By: Vagrant Cascadian <vagrant@debian.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-10-09qemu-options: Deprecate -nodefconfigEduardo Habkost
Since 2012 (commit ba6212d8 "Eliminate cpus-x86_64.conf file") we have no default config files that would be disabled using -nodefconfig. Update documentation and document -nodefconfig as deprecated. Cc: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20171004030025.7866-3-ehabkost@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-26docs: add qemu-block-drivers(7) man pageStefan Hajnoczi
Block driver documentation is available in qemu-doc.html. It would be convenient to have documentation for formats, protocols, and filter drivers in a man page. Extract the relevant part of qemu-doc.html into a new file called docs/qemu-block-drivers.texi. This file can also be built as a stand-alone document (man, html, etc). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-08-30qemu-doc: Add UUID support in initiator nameFred Rolland
Update doc with the usage of UUID for initiator name. Related-To: https://bugzilla.redhat.com/1006468 Signed-off-by: Fred Rolland <frolland@redhat.com> Message-id: 20170823084830.30500-1-frolland@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-08-14Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Mon 14 Aug 2017 13:32:10 BST # gpg: using RSA key 0xEF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: qemu-doc: Mention host_net_add/-remove in the deprecation chapter Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-14qemu-doc: Mention host_net_add/-remove in the deprecation chapterThomas Huth
The two HMP commands host_net_add and -remove have recently been marked as deprecated, too, so we should now mention them in the chapter of deprecated features. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-08-14qemu-doc: Fix "-net van" typoThomas Huth
While Andrew S. Tanenbaum has a point by saying "Never underestimate the bandwidth of a station wagon full of tapes hurtling down the highway", we don't support that way of transportation in QEMU yet, so replace the typo with the correct word "vlan". Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1502365466-19432-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-01docs: document deprecation policy & deprecated features in appendixDaniel P. Berrange
The deprecation of features in QEMU is totally adhoc currently, with no way for the user to get a list of what is deprecated in each release. This adds an appendix to the doc that records when each deprecation was made and provides text explaining what to use instead, if anything. Since there has been no formal policy around removal of deprecated features in the past, any deprecations prior to 2.10.0 are to be treated as if they had been made at the 2.10.0 release. Thus the earliest that existing deprecations will be deleted is the start of the 2.12.0 cycle. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20170725113638.7019-1-berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-11docs: document encryption options for qcow, qcow2 and luksDaniel P. Berrange
Expand the image format docs to cover the new options for the qcow, qcow2 and luks disk image formats Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-21-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-04qemu-doc: do not refer to years-old version numbersPaolo Bonzini
Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-04qemu-doc: Add missing "@c man end" statementsThomas Huth
Since commit 3f2ce724f1f1 ("Move the qemu-ga description into a separate chapter"), the qemu.1 man page looks pretty much screwed up, e.g. the title was "qemu-ga - QEMU Guest Agent" instead of "qemu-doc - QEMU Emulator User Documentation". However, that movement of the gemu-ga chapter is not the real problem, it just triggered another bug in the qemu-doc.texi: There are some parts in the file which introduce a "@c man begin OPTIONS" section, but never close it again with "@c man end". After adding the proper end tags here, the title of the man page is right again and the previously wrongly tagged sections now also show up correctly in the man page, too. Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1497863771-24929-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-15qemu-doc: include version numberPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-04qemu-doc: Add hyperlinks to further license informationThomas Huth
Add a link to the GPLv2 and a link to the LICENSE file in the QEMU repository to fix the two TODO items in this appendix. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-06-04qemu-doc: Move the qemu-ga description into a separate chapterThomas Huth
The qemu-ga description is currently a subsection of the Disk Images chapter - which does not make much sense since the qemu-ga is not directly related to disk images. So let's move this information into a separate chapter instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-05-15Merge remote-tracking branch 'kraxel/tags/pull-usb-20170512-1' into stagingStefan Hajnoczi
usb: bugfixes, doc update # gpg: Signature made Fri 12 May 2017 01:20:29 PM BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * kraxel/tags/pull-usb-20170512-1: hw/usb/dev-serial: Do not try to set vendorid or productid properties xhci: relax link check usb-hub: clear PORT_STAT_SUSPEND on wakeup xhci: fix logging usb-redir: fix stack overflow in usbredir_log_data qemu-doc: Update to use the new way of attaching USB devices Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-12qemu-doc: Update to use the new way of attaching USB devicesThomas Huth
The preferred way of adding USB devices is via "-device" and "device_add" nowadays, so let's start to get rid of "-usbdevice" and "usb_add" in the documentation. While we're at it, also add the new USB devices there which have been added to QEMU during the last years, and get rid of the old "vendorid" and "productid" parameters of "-usbdevice serial" which have been removed in QEMU version 0.14.0 already. Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1494256429-31720-1-git-send-email-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-10Merge remote-tracking branch 'mjt/tags/trivial-patches-fetch' into stagingStefan Hajnoczi
trivial patches for 2017-05-10 # gpg: Signature made Wed 10 May 2017 03:19:30 AM EDT # gpg: using RSA key 0x701B4F6B1A693E59 # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" # Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 # Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59 * mjt/tags/trivial-patches-fetch: (23 commits) tests: Remove redundant assignment MAINTAINERS: Update paths for AioContext implementation MAINTAINERS: Update paths for main loop jazz_led: fix bad snprintf tests: Ignore another built executable (test-hmp) scripts: Switch to more portable Perl shebang scripts/qemu-binfmt-conf.sh: Fix shell portability issue virtfs: allow a device id to be specified in the -virtfs option hw/core/generic-loader: Fix crash when running without CPU virtio-blk: Remove useless condition around g_free() qemu-doc: Fix broken URLs of amnhltm.zip and dosidle210.zip use _Static_assert in QEMU_BUILD_BUG_ON channel-file: fix wrong parameter comments block: Make 'replication_state' an enum util: Use g_malloc/g_free in envlist.c qga: fix compiler warnings (clang 5) device_tree: fix compiler warnings (clang 5) usb-ccid: make ccid_write_data_block() cope with null buffers tests: Ignore more test executables Add 'none' as type for drive's if option ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-10qemu-doc: Fix broken URLs of amnhltm.zip and dosidle210.zipThomas Huth
There are some broken URLs in the qemu-doc which reference tools that are not available at their original location anymore. Fortunately, they have been mirrored to archive.org, so point to that location instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-05-09Default to GSSAPI (Kerberos) instead of DIGEST-MD5 for SASLDaniel P. Berrange
RFC 6331 documents a number of serious security weaknesses in the SASL DIGEST-MD5 mechanism. As such, QEMU should not be using or recommending it as a default mechanism for VNC auth with SASL. GSSAPI (Kerberos) is the only other viable SASL mechanism that can provide secure session encryption so enable that by defalt as the replacement. If users have TLS enabled for VNC, they can optionally decide to use SCRAM-SHA-1 instead of GSSAPI, allowing plain username and password auth. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-01-25Merge remote-tracking branch 'remotes/rth/tags/pull-nios-20170124' into stagingPeter Maydell
nios2 target support # gpg: Signature made Tue 24 Jan 2017 21:11:47 GMT # gpg: using RSA key 0xAD1270CC4DD0279B # gpg: Good signature from "Richard Henderson <rth7680@gmail.com>" # gpg: aka "Richard Henderson <rth@redhat.com>" # gpg: aka "Richard Henderson <rth@twiddle.net>" # Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC 16A4 AD12 70CC 4DD0 279B * remotes/rth/tags/pull-nios-20170124: nios2: Add support for Nios-II R1 nios2: Add Altera 10M50 GHRD emulation nios2: Add periodic timer emulation nios2: Add IIC interrupt controller emulation nios2: Add usermode binaries emulation nios2: Add disas entries nios2: Add architecture emulation support Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-24nios2: Add support for Nios-II R1Marek Vasut
Add remaining bits of the Altera NiosII R1 support into qemu, which is documentation, MAINTAINERS file entry, configure bits, arch_init and configuration files for both linux-user (userland binaries) and softmmu (hardware emulation). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chris Wulff <crwulff@gmail.com> Cc: Jeff Da Silva <jdasilva@altera.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Sandra Loosemore <sandra@codesourcery.com> Cc: Yves Vandervennet <yvanderv@altera.com> Reviewed-by: Alexander Graf <agraf@suse.de> Message-Id: <20170118220146.489-8-marex@denx.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-24Fix documentation and some comments (article, grammar)Stefan Weil
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-01-18target-sparc: fix up niagara machineArtyom Tarasenko
Remove the Niagara stub implementation from sun4u.c and add a machine, compatible with Legion simulator from the OpenSPARC T1 project. The machine uses the firmware supplied with the OpenSPARC T1 project, http://download.oracle.com/technetwork/systems/opensparc/OpenSPARCT1_Arch.1.5.tar.bz2 in the directory S10image/, and is able to boot the supplied Solaris 10 image. Note that for compatibility with the naming conventions for SPARC machines the new machine name is lowercase niagara. Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-12-05qemu-doc: update gluster protocol usage guidePrasanna Kumar Kalever
Document: 1. The new debug and logfile options with their usages 2. New json format and its usage and 3. update "GlusterFS, Device URL Syntax" section in "Invocation" Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-10-07qemu-doc: merge qemu-tech and qemu-docPaolo Bonzini
Merge what is left of qemu-tech into the main manual as an appendix. Ultimately we should have a new internals manual built from docs/, and then the "Translator Internals" parts of qemu-tech could move to docs/ as well. The bits on limitation and features of CPU emulation should remain in qemu-doc. Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-07qemu-tech: move user mode emulation features from qemu-techPaolo Bonzini
These are interesting for users too, since nowadays most qemu-user users are going to be somewhat technical rather than just people that want to run Wine. Some detail is lost, on the other hand some of the information I removed (e.g. basic block unchaining) was obsolete. Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-07qemu-doc: drop installation and compilation notesPaolo Bonzini
These are in README or obsolete, and the detailed version can be on a website instead. Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-07qemu-doc: replace introduction with the one from the internals manualPaolo Bonzini
The user manual has an obsolete introduction, and the one in the internals manual lists QEMU's features quite nicely. Drop the obsolete content and remove generic user-level documentation from qemu-tech. Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-12Allow users to specify the vmdk virtual hardware version.Janne Karhunen
Vmdk images have metadata to indicate the vmware virtual hardware version image was created/tested to run with. Allow users to specify that version via new 'hwversion' option. [ kwolf: Adjust qemu-iotests common.filter ] Signed-off-by: Janne Karhunen <Janne.Karhunen@gmail.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-21ivshmem: Require master to have ID zeroMarkus Armbruster
Migration with ivshmem needs to be carefully orchestrated to work. Exactly one peer (the "master") migrates to the destination, all other peers need to unplug (and disconnect), migrate, plug back (and reconnect). This is sort of documented in qemu-doc. If peers connect on the destination before migration completes, the shared memory can get messed up. This isn't documented anywhere. Fix that in qemu-doc. To avoid messing up register IVPosition on migration, the server must assign the same ID on source and destination. ivshmem-spec.txt leaves ID assignment unspecified, however. Amend ivshmem-spec.txt to require the first client to receive ID zero. The example ivshmem-server complies: it always assigns the first unused ID. For a bit of additional safety, enforce ID zero for the master. This does nothing when we're not using a server, because the ID is zero for all peers then. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-40-git-send-email-armbru@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-11 18:12:41 +0000