aboutsummaryrefslogtreecommitdiff
path: root/qemu-char.c
AgeCommit message (Collapse)Author
2016-06-17Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc, pci, virtio: new features, cleanups, fixes Beginning of reconnect support for vhost-user. Misc cleanups and fixes. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 17 Jun 2016 01:28:39 BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: MAINTAINERS: add Marcel to PCI msi_init: change return value to 0 on success fix some coding style problems pci core: assert ENOSPC when add capability test: start vhost-user reconnect test tests: append i386 tests vhost-net: save & restore vring enable state vhost-net: save & restore vhost-user acked features vhost-net: do not crash if backend is not present vhost-user: disconnect on start failure qemu-char: add qemu_chr_disconnect to close a fd accepted by listen fd tests/vhost-user-bridge: workaround stale vring base tests/vhost-user-bridge: add client mode vhost-user: add ability to know vhost-user backend disconnection pci: fix pci_requester_id() Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: tests/Makefile.include
2016-06-17qemu-char: add qemu_chr_disconnect to close a fd accepted by listen fdTetsuya Mukawa
The patch introduces qemu_chr_disconnect(). The function is used for closing a fd accepted by listen fd. Though we already have qemu_chr_delete(), but it closes not only accepted fd but also listen fd. This new function is used when we still want to keep listen fd. Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Victor Kaplansky <victork@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-16os-posix: include sys/mman.hPaolo Bonzini
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check is bogus without a previous inclusion of sys/mman.h. Include it in sysemu/os-posix.h and remove it from everywhere else. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-06char: get rid of qemu_char_get_next_serialxiaoqiang zhao
since there is no user of qemu_char_get_next_serial any more, it's time to let it go away. Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465028065-5855-7-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-05char: ensure all clients are in non-blocking modeDaniel P. Berrange
Only some callers of tcp_chr_new_client are putting the socket client into non-blocking mode. Move the call to qio_channel_set_blocking() into the tcp_chr_new_client method to guarantee that all code paths set non-blocking mode Reported-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reported-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1458324041-22709-1-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-04-05char: fix broken EAGAIN retry on OS-X due to errno clobberingDaniel P. Berrange
Some of the chardev I/O paths really want to write the complete data buffer even though the channel is in non-blocking mode. To achieve this they look for EAGAIN and g_usleep() for 100ms. Unfortunately the code is set to check errno == EAGAIN a second time, after the g_usleep() call has completed. On OS-X at least, g_usleep clobbers errno to ETIMEDOUT, causing the retry to be skipped. This failure to retry means the full data isn't written to the chardev backend, which causes various failures including making the tests/ahci-test qtest hang. Rather than playing games trying to reset errno just simplify the code to use a goto to retry instead of a a loop. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1459438168-8146-2-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22char: translate from QIOChannel error to errnoMarc-André Lureau
Caller of CharDriverState.chr* callback assume errno error conventions. Translate QIOChannel error to errno (this fixes potential EAGAIN regression, for ex if a vhost-user backend block, qemu_chr_fe_read_all() could get error -2 and not wait) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1457718924-19338-1-git-send-email-marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-18qapi: Don't special-case simple union wrappersEric Blake
Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-17block: Use blk_{commit,flush}_all() consistentlyMax Reitz
Replace bdrv_commmit_all() and bdrv_flush_all() by their BlockBackend equivalents. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-15replay: character devicesPavel Dovgalyuk
This patch implements record and replay of character devices. It records chardevs communication in replay mode. Recorded information include data read from backend and counter of bytes written from frontend to backend to preserve frontend internal state. If character device was configured through the command line in record mode, then in replay mode it should be also added to command line. Backend of the character device could be changed in replay mode. Replaying of devices that perform ioctl and get_msgfd operations is not supported. gdbstub which also acts as a backend is not recorded to allow controlling the replaying through gdb. Monitor backends are also not recorded. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20160314074436.4980.83856.stgit@PASHA-ISP> [Add stubs. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-15Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
vhost, virtio, pci, pc, acpi nvdimm work sparse cpu id rework ipmi enhancements fixes all over the place pxb option to tweak chassis number Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 15 Mar 2016 14:33:10 GMT using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: (51 commits) hw/acpi: fix GSI links UID ipmi: add some local variables in ipmi_sdr_init ipmi: remove the need of an ending record in the SDR table ipmi: use a function to initialize the SDR table ipmi: add a realize function to the device class ipmi: add rsp_buffer_set_error() helper ipmi: remove IPMI_CHECK_RESERVATION() macro ipmi: replace IPMI_ADD_RSP_DATA() macro with inline helpers ipmi: remove IPMI_CHECK_CMD_LEN() macro MAINTAINERS: machine core MAINTAINERS: Add an entry for virtio header files pc: acpi: clarify why possible LAPIC entries must be present in MADT pc: acpi: drop cpu->found_cpus bitmap pc: acpi: create Processor and Notify objects only for valid lapics pc: acpi: create MADT.lapic entries only for valid lapics pc: acpi: SRAT: create only valid processor lapic entries pc: acpi: cleanup qdev_get_machine() calls machine: introduce MachineClass.possible_cpu_arch_ids() hook pc: init pcms->apic_id_limit once and use it throughout pc.c pc: acpi: remove NOP assignment ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-11qemu-char: make tcp_chr_disconnect() reentrant-safeMarc-André Lureau
During CHR_EVENT_CLOSED, the function could be reentered, make this case safe. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11qemu-char: remove all msgfds on disconnectMarc-André Lureau
Disconnect should reset context. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11qemu-char: avoid potential double-freeMarc-André Lureau
If tcp_set_msgfds() is called several time with NULL fds, this could lead to double-free. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-10char: remove qemu_chr_open_socket_fd methodDaniel P. Berrange
The qemu_chr_open_socket_fd method takes care of either doing a synchronous socket connect, or creating a listener socket. Part of the work when creating the listener socket is to register a watch for incoming clients. The caller of qemu_chr_open_socket_fd may not want this watch created, as it might be doing a synchronous wait for the first client. Rather than passing yet more parameters into qemu_chr_open_socket_fd to let it handle this, just remove the qemu_chr_open_socket_fd method an inline its functionality into the caller. This allows for a clearer control flow and shorter code. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-10char: remove socket_try_connect methodDaniel P. Berrange
The qemu_chr_open_socket_fd() method multiplexes three different actions into one method. The socket_try_connect() method is one of its callers, but it only ever want one specific action performed. By inlining that action into socket_try_connect() we see that there is not in fact any failure scenario, so there is not even any reason for socket_try_connect to exist. Just inline the asynchronous connection attempts directly at the places that need them. This shortens & clarifies the code. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-10char: remove qemu_chr_finish_socket_connection methodDaniel P. Berrange
The qemu_chr_finish_socket_connection method is multiplexing two different actions into one method. Each caller of it though, only wants one specific action. The code is shorter & clearer if we thus remove the method and just inline the specific actions where needed. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-05chardev: Drop useless ChardevDummy typeEric Blake
Commit d0d7708b made ChardevDummy be an empty wrapper type around ChardevCommon. But there is no technical reason for this indirection, so simplify the code by directly using the base type. Also change the fallback assignment to assign u.null rather than u.data, since a future patch will remove the data member of the C struct generated for QAPI unions. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1457106160-23614-1-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-05util: Shorten references into SocketAddressEric Blake
An upcoming patch will alter how simple unions, like SocketAddress, are laid out, which will impact all lines of the form 'addr->u.XXX' (expanding it to the longer 'addr->u.XXX.data'). For better legibility in that patch, and less need for line wrapping, it's better to use a temporary variable to reduce the effect of a layout change to just the variable initializations, rather than every reference within a SocketAddress. Also, take advantage of some C99 initialization where it makes sense (simplifying g_new0() to g_new()). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1457021813-10704-7-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-05chardev: Shorten references into ChardevBackendEric Blake
An upcoming patch will alter how simple unions, like ChardevBackend, are laid out, which will impact all lines of the form 'backend->u.XXX' (expanding it to the longer 'backend->u.XXX.data'). For better legibility in that patch, and less need for line wrapping, it's better to use a temporary variable to reduce the effect of a layout change to just the variable initializations, rather than every reference within a ChardevBackend. It doesn't hurt that this also makes the code more consistent: some clients touched here already had a temporary variable but weren't using it. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-By: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1457021813-10704-6-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-25chardev: Properly initialize ChardevCommon componentsEric Blake
Commit d0d7708b forgot to parse logging for spice chardevs and virtual consoles. This requires making qemu_chr_parse_common() non-static. While at it, use a temporary variable to make the code shorter, as well as reduce the churn when a later patch alters the layout of simple unions. Signed-off-by: Eric Blake <eblake@redhat.com> CC: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455927587-28033-2-git-send-email-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16char: fix handling of QIO_CHANNEL_ERR_BLOCKDaniel P. Berrange
If io_channel_send_full gets QIO_CHANNEL_ERR_BLOCK it and has already sent some of the data, it should return that amount of data, not EAGAIN, as that would cause the caller to re-try already sent data. Unfortunately due to a previous rebase conflict resolution error, the code for dealing with this was in the wrong part of the conditional, and so mistakenly ran on other I/O errors. This be seen running qemu-system-x86_64 -monitor stdio and entering 'info mtree', when running on a slow console (eg a slow remote ssh session). The monitor would get into an indefinite loop writing the same data until it managed to send it all without getting EAGAIN. Reported-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455288410-27046-1-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16Revert "qemu-char: Keep pty slave file descriptor open until the master is ↵Paolo Bonzini
closed" This reverts commit 34689e206abddac87a5217d458534e24f2a05562. Marc-André Lureau provided the following commentary: "It looks like if a the slave is opened, then Linux will buffer the master writes, up to a few kb and then throttle, so it's not entirely blocked but eventually the guest VM dies. However, not having any slave open it will simply let the write go and discard the data. At least, virt-install configures a pty for the serial but viewers like virt-manager do not necessarily open it. And, if there are no viewers, it will just hang. If qemu starts reading all the data from the slave, I don't think interactions with other slaves will work. I don't see much options but to close the slave, thus reverting this patch." Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-11char: fix parameter name / type in BSD codepathDaniel P. Berrange
The BSD impl of qemu_chr_open_pp_fd had mis-declared its parameter type as ChardevBackend instead of ChardevCommon. It had also mistakenly used the variable name 'common' instead of 'backend'. Tested-by: Sean Bruno <sbruno@freebsd.org> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-02-09qemu-char, io: fix ordering of arguments for UDP socket creationPaolo Bonzini
Two wrongs make a right, but they should be fixed anyway. Cc: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1455015557-15106-1-git-send-email-pbonzini@redhat.com>
2016-02-09char: fix repeated registration of tcp chardev I/O handlersDaniel P. Berrange
In previous commit: commit f2001a7e0555b66d6db25a3ff1801540814045bb Author: Daniel P. Berrange <berrange@redhat.com> Date: Tue Jan 19 11:14:30 2016 +0000 char: don't assume telnet initialization will not block The code which writes the telnet initialization sequence moved to an event loop callback. If the TCP chardev is opened as a server in blocking mode (ie -serial telnet:0.0.0.0:3000,server,wait) this results in a state where the TCP chardev is connected, but not yet ready to send/recv data when virtual hardware is created. When the virtual hardware initialization registers its chardev callbacks, it triggers tcp_chr_update_read_handler, which will add I/O watches to the connection. When the telnet initialization finally runs, it will then call tcp_chr_connect to finish the connection setup. This will in turn add I/O watches to the connection too. There are now two sets of I/O watches registered on the same connection. This ultimately causes data loss on the connection, for example, when typing into the telnet console only every second byte is echoed back to the client. The same flaw can affect channels running with TLS encryption too, since they also have delayed connection setup completion. The fix is to update tcp_chr_update_read_handler so that it avoids registering watches if the connection is not fully setup yet. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1454939707-10869-1-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-09qemu-char: Keep pty slave file descriptor open until the master is closedPaolo Bonzini
If a process opens the slave pts device, writes data to it, then immediately closes it, the data doesn't reliably get delivered to the emulated serial port. This seems to be because a read of the master pty device returns EIO on Linux if no process has the pts device open, even when data is waiting "in the pipe". A fix seems to be for QEMU to keep the pts file descriptor open until the pty is closed, as per the below patch. Signed-off-by: Ashley Jonathan <jonathan.ashley@altran.com> Message-Id: <AC19797808C8D548ABDE0CA4A97AA30A30DEB409@XMB-DCFR-37.europe.corp.altran.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-04all: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
2016-02-02char: remove qemu_chr_open_eventfdMarc-André Lureau
Broken since d0d7708ba29cbc, since the backend is NULL. And now no longer needed by ivshmem. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2016-01-26qemu-char: avoid leak in qemu_chr_open_pp_fdPaolo Bonzini
drv leaks if qemu_chr_alloc returns an error. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-26char: introduce support for TLS encrypted TCP chardev backendDaniel P. Berrange
This integrates support for QIOChannelTLS object in the TCP chardev backend. If the 'tls-creds=NAME' option is passed with the '-chardev tcp' argument, then it will setup the chardev such that the client is required to establish a TLS handshake when connecting. There is no support for checking the client certificate against ACLs in this initial patch. This is pending work to QOM-ify the ACL object code. A complete invocation to run QEMU as the server for a TLS encrypted serial dev might be $ qemu-system-x86_64 \ -nodefconfig -nodefaults -device sga -display none \ -chardev socket,id=s0,host=127.0.0.1,port=9000,tls-creds=tls0,server \ -device isa-serial,chardev=s0 \ -object tls-creds-x509,id=tls0,endpoint=server,verify-peer=off,\ dir=/home/berrange/security/qemutls To test with the gnutls-cli tool as the client: $ gnutls-cli --priority=NORMAL -p 9000 \ --x509cafile=/home/berrange/security/qemutls/ca-cert.pem \ 127.0.0.1 If QEMU was told to use 'anon' credential type, then use the priority string 'NORMAL:+ANON-DH' with gnutls-cli Alternatively, if setting up a chardev to operate as a client, then the TLS credentials registered must be for the client endpoint. First a TLS server must be setup, which can be done with the gnutls-serv tool $ gnutls-serv --priority=NORMAL -p 9000 --echo \ --x509cafile=/home/berrange/security/qemutls/ca-cert.pem \ --x509certfile=/home/berrange/security/qemutls/server-cert.pem \ --x509keyfile=/home/berrange/security/qemutls/server-key.pem Then QEMU can connect with $ qemu-system-x86_64 \ -nodefconfig -nodefaults -device sga -display none \ -chardev socket,id=s0,host=127.0.0.1,port=9000,tls-creds=tls0 \ -device isa-serial,chardev=s0 \ -object tls-creds-x509,id=tls0,endpoint=client,\ dir=/home/berrange/security/qemutls Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1453202071-10289-5-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-26char: don't assume telnet initialization will not blockDaniel P. Berrange
The current code for doing telnet initialization is writing to a socket without checking the return status. While it is highly unlikely to be a problem when writing to a bare socket, as the buffers are large enough to prevent blocking, this cannot be assumed safe with TLS sockets. So write the telnet initialization code into a memory buffer and then use an I/O watch to fully send the data. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1453202071-10289-4-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-26char: convert from GIOChannel to QIOChannelDaniel P. Berrange
In preparation for introducing TLS support to the TCP chardev backend, convert existing chardev code from using GIOChannel to QIOChannel. This simplifies the chardev code by removing most of the OS platform conditional code for dealing with file descriptor passing. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1453202071-10289-3-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-26char: remove fixed length filename allocationDaniel P. Berrange
A variety of places were snprintf()ing into a fixed length filename buffer. Some of the buffers were stack allocated, while another was heap allocated with g_malloc(). Switch them all to heap allocated using g_strdup_printf() avoiding arbitrary length restrictions. This also facilitates later patches which will want to populate the filename by calling external functions which do not support use of a pre-allocated buffer. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1453202071-10289-2-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-15qemu-char: do not leak QemuMutex when freeing a character devicePaolo Bonzini
The leak is only apparent on Win32. On POSIX platforms destroying a mutex is not necessary. Reported-by: Eric Blake <eblake@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-15qemu-char: add logfile facility to all chardev backendsDaniel P. Berrange
Typically a UNIX guest OS will log boot messages to a serial port in addition to any graphical console. An admin user may also wish to use the serial port for an interactive console. A virtualization management system may wish to collect system boot messages by logging the serial port, but also wish to allow admins interactive access. Currently providing such a feature forces the mgmt app to either provide 2 separate serial ports, one for logging boot messages and one for interactive console login, or to proxy all output via a separate service that can multiplex the two needs onto one serial port. While both are valid approaches, they each have their own downsides. The former causes confusion and extra setup work for VM admins creating disk images. The latter places an extra burden to re-implement much of the QEMU chardev backends logic in libvirt or even higher level mgmt apps and adds extra hops in the data transfer path. A simpler approach that is satisfactory for many use cases is to allow the QEMU chardev backends to have a "logfile" property associated with them. $QEMU -chardev socket,host=localhost,port=9000,\ server=on,nowait,id-charserial0,\ logfile=/var/log/libvirt/qemu/test-serial0.log -device isa-serial,chardev=charserial0,id=serial0 This patch introduces a 'ChardevCommon' struct which is setup as a base for all the ChardevBackend types. Ideally this would be registered directly as a base against ChardevBackend, rather than each type, but the QAPI generator doesn't allow that since the ChardevBackend is a non-discriminated union. The ChardevCommon struct provides the optional 'logfile' parameter, as well as 'logappend' which controls whether QEMU truncates or appends (default truncate). Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1452516281-27519-1-git-send-email-berrange@redhat.com> [Call qemu_chr_parse_common if cd->parse is NULL. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-15qemu-char: delete send_all/recv_all helper methodsDaniel P. Berrange
The qemu-char.c contains two helper methods send_all and recv_all. These are in fact declared in sockets.h so ought to have been in util/qemu-sockets.c. For added fun the impl of recv_all is completely missing on Win32. Fortunately there is only a single caller of these methods, the TPM passthrough code, which is only ever compiled on Linux. With only a single caller these helpers are not compelling enough to keep so inline them in the TPM code, avoiding the need to fix the missing recv_all on Win32. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1450879144-17111-1-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-18qemu-char: convert to use error checked base64 decodeDaniel P. Berrange
Switch from using g_base64_decode over to qbase64_decode in order to get error checking of the base64 input data. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-17qemu-char: append opt to stop truncation of serial fileOlga Krishtal
Our QA team wants to preserve serial output of the guest in between QEMU runs to perform post-analysis. By default this behavior is off (file is truncated each time QEMU is started or device is plugged). Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Eric Blake <eblake@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1449211324-17856-1-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-02qemu-char: retry g_poll on EINTRPaolo Bonzini
This is a case where pty_chr_update_read_handler_locked's lack of error checking can produce incorrect values. We are not using SIGUSR1 anymore, so this is quite theoretical, but easy to fix. Reported-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-02char: Convert to new qapi union layoutEric Blake
We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. Make the conversion to the new layout for character-related code. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-19-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-10-24char: add qemu_chr_free()Marc-André Lureau
If a chardev is allowed to be created outside of QMP, then it must be also possible to free it. This is useful for ivshmem that creates chardev anonymously and must be able to free them. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-20sockets: move qapi_copy_SocketAddress into qemu-sockets.cDaniel P. Berrange
The qapi_copy_SocketAddress method is going to be useful in more places than just qemu-char.c, so move it into the qemu-sockets.c file to allow its reuse. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-10-19qemu-char: cleanup after completed conversion to cd->createPaolo Bonzini
All backends now return errors through Error*, so the "Failed to create chardev" placeholder error can only be reached if the backend is not available (and only from the chardev-add QMP command; instead, the -chardev command line option fails earlier). Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19qemu-char: convert ringbuf backend to data-driven creationPaolo Bonzini
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19qemu-char: convert vc backend to data-driven creationPaolo Bonzini
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19qemu-char: convert spice backend to data-driven creationPaolo Bonzini
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19qemu-char: convert console backend to data-driven creationPaolo Bonzini
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19qemu-char: convert stdio backend to data-driven creationPaolo Bonzini
The backend now always returns errors via the Error* argument. This avoids a double error message. Before: qemu-system-x86_64: -chardev stdio,id=base: cannot use stdio with -daemonize qemu-system-x86_64: -chardev stdio,id=base: Failed to create chardev After: qemu-system-x86_64: -chardev stdio,id=base: cannot use stdio with -daemonize Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-11 14:37:11 +0000