aboutsummaryrefslogtreecommitdiff
path: root/pc-bios
AgeCommit message (Collapse)Author
2020-10-26configure: move install_blobs from configure to mesonPaolo Bonzini
Move the conditions under which edk2 blobs are decompressed and installed to pc-bios/meson.build. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-26configure: move directory options from config-host.mak to mesonPaolo Bonzini
Since installation is not part of Makefiles anymore, Make need not know the directories anymore. Meson already knows them through built-in options, do everything using them instead of the config_host dictionary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-13Remove superfluous .gitignore filesThomas Huth
Since we are now always doing out-of-tree builds, these gitignore files should not be necessary anymore. Message-Id: <20200919133637.72744-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios/s390: Update the s390-ccw bios binariesThomas Huth
Make sure that the binaries match the current state of the sources. Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios: s390x: Go into disabled wait when encountering a PGM exceptionJanosch Frank
Let's setup a PGM PSW, so we won't load 0s when a program exception happens. Instead we'll load a disabled wait PSW. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201006094249.50640-5-frankja@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios: s390x: Use reset PSW if avaliableJanosch Frank
If a blob provides a reset PSW then we should use it instead of branching to the PSW address and using our own mask. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201006094249.50640-4-frankja@linux.ibm.com> [thuth: Use Elvis operator to shorten long line] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios: s390x: Save PSW reworkJanosch Frank
We don't need to save the ipl_continue variable in lowcore and have it limited to 32 bits because of the lowcore layout. Let's move it to a new 64 bit variable and get rid of the reset info struct. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201006094249.50640-3-frankja@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios: s390x: Fix bootmap.c zipl component entry data handlingJanosch Frank
The two main types of zipl component entries are execute and load/data. The last member of the component entry struct therefore denotes either a PSW or an address. Let's make this a bit more clear by introducing a union and cleaning up the code that uses that struct member. The execute type component entries written by zipl contain short PSWs, not addresses. Let's mask them and only pass the address part to jump_to_IPL_code(uint64_t address) because it expects an address as visible by the name of the argument. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201006094249.50640-2-frankja@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios/s390-ccw: break loop if a null block number is reachedMarc Hartmayer
Break the loop if `cur_block_nr` is a null block number because this means that the end of chunk is reached. In this case we will try to boot the default entry. Fixes: ba831b25262a ("s390-ccw: read stage2 boot loader data to find menu") Reviewed-by: Collin Walling <walling@linux.ibm.com> Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com> Message-Id: <20200924085926.21709-3-mhartmay@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios/s390-ccw: fix off-by-one errorMarc Hartmayer
This error takes effect when the magic value "zIPL" is located at the end of a block. For example if s2_cur_blk = 0x7fe18000 and the magic value "zIPL" is located at 0x7fe18ffc - 0x7fe18fff. Fixes: ba831b25262a ("s390-ccw: read stage2 boot loader data to find menu") Reviewed-by: Collin Walling <walling@linux.ibm.com> Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com> Message-Id: <20200924085926.21709-2-mhartmay@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [thuth: Use "<= ... - 4" instead of "< ... - 3"] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios/s390-ccw/main: Remove superfluous call to enable_subchannel()Thomas Huth
enable_subchannel() is already done during is_dev_possibly_bootable() (which is called from find_boot_device() -> find_subch()), so there is no need to do this again in the main() function. Message-Id: <20200806105349.632-9-thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios/s390-ccw: Allow booting in case the first virtio-blk disk is badThomas Huth
If you try to boot with two virtio-blk disks (without bootindex), and only the second one is bootable, the s390-ccw bios currently stops at the first disk and does not continue booting from the second one. This is annoying - and all other major QEMU firmwares succeed to boot from the second disk in this case, so we should do the same in the s390-ccw bios, too. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200806105349.632-8-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios/s390-ccw: Scan through all devices if no boot device specifiedThomas Huth
If no boot device has been specified (via "bootindex=..."), the s390-ccw bios scans through all devices to find a bootable device. But so far, it stops at the very first block device (including virtio-scsi controllers without attached devices) that it finds, no matter whether it is bootable or not. That leads to some weird situatation where it is e.g. possible to boot via: qemu-system-s390x -hda /path/to/disk.qcow2 but not if there is e.g. a virtio-scsi controller specified before: qemu-system-s390x -device virtio-scsi -hda /path/to/disk.qcow2 While using "bootindex=..." is clearly the preferred way of booting on s390x, we still can make the life for the users at least a little bit easier if we look at all available devices to find a bootable one. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1846975 Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200806105349.632-7-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios/s390-ccw: Do not bail out early if not finding a SCSI diskThomas Huth
In case the user did not specify a boot device, we want to continue looking for other devices if there are no valid SCSI disks on a virtio- scsi controller. As a first step, do not panic in this case and let the control flow carry the error to the upper functions instead. Message-Id: <20200806105349.632-6-thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios/s390-ccw: Move the inner logic of find_subch() to a separate functionThomas Huth
Move the code to a separate function to be able to re-use it from a different spot later. Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20200806105349.632-5-thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios/s390-ccw: Introduce ENODEV define and remove guards of othersThomas Huth
Remove the "#ifndef E..." guards from the defines here - the header guard S390_CCW_H at the top of the file should avoid double definition, and if the error code is defined in a different file already, we're in trouble anyway, then it's better to see the error at compile time instead of hunting weird behavior during runtime later. Also define ENODEV - we will use this in a later patch. Message-Id: <20200806105349.632-4-thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios/s390-ccw: Move ipl-related code from main() into a separate functionThomas Huth
Let's move this part of the code into a separate function to be able to use it from multiple spots later. Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Message-Id: <20200806105349.632-3-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-06pc-bios/s390-ccw/Makefile: Compile with -std=gnu99, -fwrapv and -fno-commonThomas Huth
The main QEMU code is compiled with -std=gnu99, -fwrapv and -fno-common. We should use the same flags for the s390-ccw bios, too, to avoid that we get different behavior with different compiler versions that changed their default settings in the course of time (it happened at least with -std=... and -fno-common in the past already). While we're at it, also group the other flags here in a little bit nicer fashion: Move the two "-m" flags out of the "-f" area and specify them on a separate line. Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Message-Id: <20200806105349.632-2-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-30meson: fix installation of keymapsAnthony PERARD
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20200918130354.1879275-1-anthony.perard@citrix.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-17seabios: add bios-microvm.bin binaryGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20200915120909.20838-4-kraxel@redhat.com
2020-09-17microvm: name qboot binary qboot.romGerd Hoffmann
qboot isn't a bios and shouldnt be named that way. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200915120909.20838-2-kraxel@redhat.com
2020-09-14roms: Add virtual Boot ROM for NPCM7xx SoCsHavard Skinnemoen
This is a minimalistic boot ROM written specifically for use with QEMU. It supports loading the second-stage loader from SPI flash into RAM, SMP boot, and not much else. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-7-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-13pc-bios: update the README file with edk2-stable202008 informationLaszlo Ersek
Refresh the "pc-bios/README" file with edk2 and OpenSSL release info, matching the edk2-stable202008 firmware images added in the previous patch. Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Ref: https://bugs.launchpad.net/qemu/+bug/1852196 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <e967b4d5-bcc2-3846-0ad6-9e8f4d2f9115@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-09-13pc-bios: refresh edk2 build artifacts for edk2-stable202008Laszlo Ersek
Rebuild the pc-bios/edk2-*.fd.bz2 binaries, based on the edk2-stable202008 release. Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Ref: https://bugs.launchpad.net/qemu/+bug/1852196 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200908072939.30178-10-lersek@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-09-08Merge remote-tracking branch ↵Peter Maydell
'remotes/kraxel/tags/sirius/ipxe-20200908-pull-request' into staging ipxe: update to aug 2020 snapshot. # gpg: Signature made Tue 08 Sep 2020 07:09:26 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/sirius/ipxe-20200908-pull-request: ipxe: update binaries ipxe: drop ia32 efi roms ipxe: update submodule Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-08ipxe: update binariesGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-07Merge remote-tracking branch 'remotes/hdeller/tags/target-hppa-pull-request' ↵Peter Maydell
into staging hppa power button support, graphics updates and firmware fixes # gpg: Signature made Mon 07 Sep 2020 20:09:49 BST # gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F # gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown] # gpg: aka "Helge Deller <deller@kernel.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603 # Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F * remotes/hdeller/tags/target-hppa-pull-request: hw/display/artist: Allow screen size up to 2048 lines hw/display/artist: Refactor x/y coordination extraction hw/display/artist: Verify artist screen resolution target/hppa: Fix boot with old Linux installation CDs hw/hppa: Add power button emulation hw/hppa: Tell SeaBIOS port address of fw_cfg hw/hppa: Change fw_cfg port address hw/hppa: Store boot device in fw_cfg section hw/hppa: Make number of TLB and BTLB entries configurable seabios-hppa: Update SeaBIOS to hppa-qemu-5.2-2 tag Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-03meson: fix keymaps without qemu-keymapGerd Hoffmann
In case the qemu-keymap tool generating them is neither installed on the system nor built from sources (due to xkbcommon not being available) qemu will not find the keymaps when started directly from the build tree, This happens because commit ddcf607fa3d6 ("meson: drop keymaps symlink") removed the symlink to the source tree, and the special handling for install doesn't help in case we do not install qemu. Lets fix that by simply copying over the file from the source tree as fallback. Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20200827102617.14448-1-kraxel@redhat.com> [thuth: Rebased, changed "config_host['qemu_datadir']" to "qemu_datadir", added Gerd's UNLINK fix to configure script] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-01seabios-hppa: Update SeaBIOS to hppa-qemu-5.2-2 tagHelge Deller
Changes: * If only one bootable device is available, boot from it. * Silence PDC warnings with HP-UX 11.11 * Inform Linux about fw_cfg port addresses * Make power switch button configurable from qemu * Clear screen on machine reset * Add fw_cfg option to enable runtime debug info * Fix panic on OpenBSD/6.7 regarding STI console * Set text planes and used_bits in STI fields * Fix mon_tbl entries * Convert sti_region_list to an initialized struct Signed-off-by: Helge Deller <deller@gmx.de>
2020-09-01build: fix recurse-all targetPaolo Bonzini
The missing "/all" suffix prevents the pc-bios/ parts of the build from running. In the meanwhile, -Wall has moved from QEMU_CFLAGS to CFLAGS. Simplify everything by not passing down CFLAGS, and add -Wall in the recursive Makefiles. Reported-by: Miroslav Rezanina <mrezanin@redhat.com> Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com> Tested-by: Thomas Huth <thuth@redhat.com> Fixes: 5e6d1573b4 ("remove Makefile.target", 2020-08-21) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-01meson: use meson datadir instead of qemu_datadirMarc-André Lureau
When cross-compiling, by default qemu_datadir is 'c:\Program Files\QEMU', which is not recognized as being an absolute path, and meson will end up adding the prefix again. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200826110419.528931-6-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-01meson: install pc-bios blobsMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200826130622.553318-2-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-26Merge remote-tracking branch ↵Peter Maydell
'remotes/hdeller/tags/target-hppa-v3-pull-request' into staging artist out of bounds fixes # gpg: Signature made Wed 26 Aug 2020 22:09:55 BST # gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F # gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown] # gpg: aka "Helge Deller <deller@kernel.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603 # Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F * remotes/hdeller/tags/target-hppa-v3-pull-request: hw/display/artist: Fix invalidation of lines near screen border hw/display/artist: Fix invalidation of lines in artist_draw_line() hw/display/artist: Unbreak size mismatch memory accesses hw/display/artist: Prevent out of VRAM buffer accesses Revert "hw/display/artist: Avoid drawing line when nothing to display" hw/display/artist: Refactor artist_rop8() to avoid buffer over-run hw/display/artist: Check offset in draw_line to avoid buffer over-run hw/hppa/lasi: Don't abort on invalid IMR value hw/display/artist.c: fix out of bounds check hw/hppa: Implement proper SeaBIOS version check seabios-hppa: Update to SeaBIOS hppa version 1 hw/hppa: Sync hppa_hardware.h file with SeaBIOS sources Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24microblaze: petalogix-s3adsp1800: Add device-tree sourceEdgar E. Iglesias
Add a device-tree source for petalogix-s3adsp1800 and recompile the DTB. This also removes the unused mpmc node which causes compilation warnings. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2020-08-24microblaze: petalogix-ml605: Add device-tree sourceEdgar E. Iglesias
Add a device-tree source for petalogix-ml605 and recompile the DTB. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2020-08-23Merge remote-tracking branch ↵Peter Maydell
'remotes/alistair/tags/pull-riscv-to-apply-20200821-1' into staging The first RISC-V PR for the 5.2 window. This includes: - NaNBox fixes - Vector extension improvements - a L2 cache controller - PMP fixes - Upgrade to OpenSBI v0.8 and the generic platform - Fixes for the Ibex PLIC # gpg: Signature made Sat 22 Aug 2020 06:38:18 BST # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair/tags/pull-riscv-to-apply-20200821-1: hw/intc: ibex_plic: Honour source priorities hw/intc: ibex_plic: Don't allow repeat interrupts on claimed lines hw/intc: ibex_plic: Update the pending irqs target/riscv: Change the TLB page size depends on PMP entries. target/riscv: Fix the translation of physical address gitlab-ci/opensbi: Update GitLab CI to build generic platform hw/riscv: spike: Change the default bios to use generic platform image hw/riscv: Use pre-built bios image of generic platform for virt & sifive_u roms/Makefile: Build the generic platform for RISC-V OpenSBI firmware roms/opensbi: Upgrade from v0.7 to v0.8 configure: Create symbolic links for pc-bios/*.elf files riscv: Fix bug in setting pmpcfg CSR for RISCV64 hw/riscv: sifive_u: Add a dummy L2 cache controller device target/riscv: check before allocating TCG temps target/riscv: Clean up fmv.w.x target/riscv: Check nanboxed inputs in trans_rvf.inc.c target/riscv: Check nanboxed inputs to fp helpers target/riscv: Generate nanboxed results from trans_rvf.inc.c target/riscv: Generalize gen_nanbox_fpr to gen_nanbox_s target/riscv: Generate nanboxed results from fp helpers Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-22Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell
staging meson fixes: * --disable-tools --enable-system build * s390 no-TCG build * fdmon-io_uring * 'shift' error message in version_ge() # gpg: Signature made Fri 21 Aug 2020 22:12:29 BST # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: keymaps: update meson: Fix --disable-tools --enable-system builds meson: convert pc-bios/keymaps/Makefile configure: silence 'shift' error message in version_ge() util/meson.build: fix fdmon-io_uring build target/s390x: fix meson.build issue Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-21hw/riscv: spike: Change the default bios to use generic platform imageBin Meng
To keep sync with other RISC-V machines, change the default bios to use generic platform fw_dynamic.elf image. While we are here, add some comments to mention that using ELF files for the Spike machine was intentional. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1596439832-29238-6-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21hw/riscv: Use pre-built bios image of generic platform for virt & sifive_uBin Meng
Update virt and sifive_u machines to use the opensbi fw_dynamic bios image built for the generic FDT platform. Remove the out-of-date no longer used bios images. Note: 1. To test 32-bit Linux kernel on QEMU 'sifive_u' 32-bit machine, the following patch is needed: http://lists.infradead.org/pipermail/linux-riscv/2020-July/001213.html 2. To test 64-bit Linux 5.3 kernel on QEMU 'virt' or 'sifive_u' 64-bit machines, the following commit should be cherry-picked to 5.3: commit 922b0375fc93fb1a20c5617e37c389c26bbccb70 Author: Albert Ou <aou@eecs.berkeley.edu> Date: Fri Sep 27 16:14:18 2019 -0700 riscv: Fix memblock reservation for device tree blob Linux 5.4 or above already contains this commit/fix. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1596439832-29238-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21Merge remote-tracking branch ↵Peter Maydell
'remotes/kraxel/tags/seabios-20200819-pull-request' into staging seabios: update to 1.14-final # gpg: Signature made Wed 19 Aug 2020 07:36:36 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/seabios-20200819-pull-request: seabios: update to 1.14-final Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-21keymaps: updatePaolo Bonzini
Looks like update-keymaps has not been run in a while. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21meson: convert pc-bios/keymaps/MakefileMarc-André Lureau
Note that sl and sv keymaps were not created by qemu-keymap. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21meson: handle edk2 bios and descriptorsMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21pc-bios/s390-ccw: do not use rules.makThomas Huth
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21optionrom: simplify MakefileMarc-André Lureau
Make it independent from the rules.mak, and clean up to use pattern rules. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-19seabios: update to 1.14-finalGerd Hoffmann
Due to 1.14 release being delayed it missed qemu 5.1. The last snapshot has all code changes though, so this changes only the version string in the binaries. shortlog ======== Kevin O'Connor (1): docs: Note v1.14.0 release Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-08-04seabios-hppa: Update to SeaBIOS hppa version 1Helge Deller
Changes include: * gcc-10 compile fix * NetBSD boot fix due to wrong power button address * Fix endian bug in romfile_loadint() * Introduce SeaBIOS firmware version check * Implement QEMU fw_cfg interface support Required for proper version checking and gcc-10 update on Debian. Signed-off-by: Helge Deller <deller@gmx.de>
2020-08-03seabios: update to master snapshotGerd Hoffmann
seabios master branch got a few bugfixes, so update to a newer snapshot to pick them up for 5.1-rc3. shortlog ======== Kevin O'Connor (2): vgabios: Fix preserve memory flag in handle_1000 ldnoexec: Add script to remove ET_EXEC flag from intermediate build objects Paul Menzel (1): nvme: Increase `nvme_cmd_readwrite()` message log level from 3 to 5 Stefan Reiter (1): virtio-scsi: fix boot prio detection by using correct lun Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-07-27Update OpenBIOS images to 7f28286f built from submodule.Mark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: qemu-stable@nongnu.org
2020-07-20pseries: Update SLOF firmware imageAlexey Kardashevskiy
This adds tcgbios (this was posted earlier [1] but got lost) and fixes FDT update at ibm,client-architecture-support for huge guests. The full list of changes: Alexey Kardashevskiy (4): make: Define default rule for .c when V=1 or V=2 version: update to 20200513 fdt: Avoid recursion when traversing tree version: update to 20200717 Gustavo Romero (1): board-qemu: Fix comment about SLOF start address Stefan Berger (6): tcgbios: Only write logs for PCRs that are allocated tcgbios: Fix the vendorInfoSize to be of type uint8_t tcgbios: Add support for SHA3 type of algorithms elf: Implement elf_get_file_size to determine size of an ELF image tcgbios: Implement tpm_hash_log_extend_event_buffer tcgbios: Measure the bootloader file read from disk [1] https://patchwork.ozlabs.org/project/qemu-devel/patch/20200513024355.121476-1-aik@ozlabs.ru/ Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>