aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2018-10-03chardev: mark the calls that allow an implicit mux monitorMarc-André Lureau
This is mostly for readability of the code. Let's make it clear which callers can create an implicit monitor when the chardev is muxed. This will also enforce a safer behaviour, as we don't really support creating monitor anywhere/anytime at the moment. Add an assert() to make sure the programmer explicitely wanted that behaviour. There are documented cases, such as: -serial/-parallel/-virtioconsole and to less extent -debugcon. Less obvious and questionable ones are -gdb, SLIRP -guestfwd and Xen console. Add a FIXME note for those, but keep the support for now. Other qemu_chr_new() callers either have a fixed parameter/filename string or do not need it, such as -qtest: * qtest.c: qtest_init() Afaik, only used by tests/libqtest.c, without mux. I don't think we support it outside of qemu testing: drop support for implicit mux monitor (qemu_chr_new() call: no implicit mux now). * hw/ All with literal @filename argument that doesn't enable mux monitor. * tests/ All with @filename argument that doesn't enable mux monitor. On a related note, the list of monitor creation places: - the chardev creators listed above: all from command line (except perhaps Xen console?) - -gdb & hmp gdbserver will create a "GDB monitor command" chardev that is wired to an HMP monitor. - -mon command line option From this short study, I would like to think that a monitor may only be created in the main thread today, though I remain skeptical :) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-09-25net/slirp: Deprecate the [hub_id name] parameter tupleThomas Huth
The "name" in the [hub_id name] parameter tuple is the same as a "netdev_id" (which should be unique), so specifying the hub_id here is just redundant (it was likely just necessary in the past when the network subsystem was still using "vlans" only and when it did not use unique "id"s yet). Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-09-25net: Deprecate the "name" parameter of -netThomas Huth
In early times, network backends were specified by a "vlan" and "name" tuple. With the introduction of netdevs, the "name" was replaced by an "id" (which is supposed to be unique), but the "name" parameter stayed as an alias which could be used instead of "id". Unfortunately, we miss the duplication check for "name": $ qemu-system-x86_64 -net user,name=n1 -net user,name=n1 ... starts without an error, while "id" correctly complains: $ qemu-system-x86_64 -net user,id=n1 -net user,id=n1 qemu-system-x86_64: -net user,id=n1: Duplicate ID 'n1' for net Instead of trying to fix the code for the legacy "name" parameter, let's rather get rid of this old interface and deprecate the "name" parameter now - this will also be less confusing for the users in the long run. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-08-31net: Remove the deprecated -tftp, -bootp, -redir and -smb optionsThomas Huth
These options likely do not work as expected as soon as the user tries to use more than one network interface at once. The parameters have been marked as deprecated since QEMU v2.6, so users had plenty of time to move their scripts to the new syntax. Time to remove the old parameters now. Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Acked-by: Peter Krempa <pkrempa@redhat.com> Acked-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-07-20tap: fix memory leak on success to create a tap deviceYunjian Wang
The memory leak on success to create a tap device. And the nfds and nvhosts may not be the same and need to be processed separately. Fixes: 07825977 ("tap: fix memory leak on failure to create a multiqueue tap device") Fixes: 264986e2 ("tap: multiqueue support") Cc: qemu-stable@nongnu.org Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-06-15vhost-user: delete net client if necessarylinzhecheng
As qemu_new_net_client create new ncs but error happens later, ncs will be left in global net_clients list and we can't use them any more, so we need to cleanup them. Cc: qemu-stable@nongnu.org Signed-off-by: linzhecheng <linzhecheng@huawei.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-06-15net: Fix a potential segfaultLin Ma
If user forgets to provide any backend types for '-netdev' in qemu CLI, It triggers seg fault. e.g. Expected: $ qemu -netdev id=net0 qemu-system-x86_64: Parameter 'type' is missing Actual: $ qemu -netdev id=net0 Segmentation fault (core dumped) Fixes: 547203ead4327 ("net: List available netdevs with "-netdev help") Reviewed-by: Thomas Huth <thuth@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Lin Ma <lma@suse.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-06-15tap: set vhostfd passed from qemu cli to non-blockingBrijesh Singh
A guest boot hangs while probing the network interface when iommu_platform=on is used. The following qemu cli hangs without this patch: # $QEMU \ -netdev tap,fd=3,id=hostnet0,vhost=on,vhostfd=4 3<>/dev/tap67 4<>/dev/host-net \ -device virtio-net-pci,netdev=hostnet0,id=net0,iommu_platform=on,disable-legacy=on \ ... Commit: c471ad0e9bd46 (vhost_net: device IOTLB support) took care of setting vhostfd to non-blocking when QEMU opens /dev/host-net but if the fd is passed from qemu cli then we need to ensure that fd is set to non-blocking. Fixes: c471ad0e9bd46 ("vhost_net: device IOTLB support") Cc: qemu-stable@nongnu.org Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-06-12object: fix OBJ_PROP_LINK_UNREF_ON_RELEASE ambivalenceMarc-André Lureau
A link property can be set during creation, with object_property_add_link() and later with object_property_set_link(). add_link() doesn't add a reference to the target object, while set_link() does. Furthemore, OBJ_PROP_LINK_UNREF_ON_RELEASE flags, set during add_link, says whether a reference must be released when the property is destroyed. This can lead to leaks if the property was later set_link(), as the added reference is never released. Instead, rename OBJ_PROP_LINK_UNREF_ON_RELEASE to OBJ_PROP_LINK_STRONG and use that has an indication on how the link handle reference management in set_link(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20180531195119.22021-3-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-04Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
acpi, vhost, misc: fixes, features vDPA support, fix to vhost blk RO bit handling, some include path cleanups, NFIT ACPI table. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 01 Jun 2018 17:25:19 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (31 commits) vhost-blk: turn on pre-defined RO feature bit ACPI testing: test NFIT platform capabilities nvdimm, acpi: support NFIT platform capabilities tests/.gitignore: add entry for generated file arch_init: sort architectures ui: use local path for local headers qga: use local path for local headers colo: use local path for local headers migration: use local path for local headers usb: use local path for local headers sd: fix up include vhost-scsi: drop an unused include ppc: use local path for local headers rocker: drop an unused include e1000e: use local path for local headers ioapic: fix up includes ide: use local path for local headers display: use local path for local headers trace: use local path for local headers migration: drop an unused include ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01colo: use local path for local headersMichael S. Tsirkin
When pulling in headers that are in the same directory as the C file (as opposed to one in include/), we should use its relative path, without a directory. Reviewed-by: Zhang Chen <zhangckid@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-05-31net/slirp: Convert atoi to qemu_strtoi to allow error checkingNia Alarie
Signed-off-by: Nia Alarie <nia.alarie@gmail.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2018-05-31slirp: Add domainname option to slirp's DHCP serverBenjamin Drung
This patch will allow the user to include the domainname option in replies from the built-in DHCP server. Signed-off-by: Benjamin Drung <benjamin.drung@profitbricks.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2018-05-24vhost-user: introduce shared vhost-user stateTiwei Bie
When multi queue is enabled e.g. for a virtio-net device, each queue pair will have a vhost_dev, and the only thing shared between vhost devs currently is the chardev. This patch introduces a vhost-user state structure which will be shared by all vhost devs of the same virtio device. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-23vhost-user: add Net prefix to internal state structureTiwei Bie
We are going to introduce a shared vhost user state which will be named as 'VhostUserState'. So add 'Net' prefix to the existing internal state structure in the vhost-user netdev to avoid conflict. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-14net: Get rid of 'vlan' terminology and use 'hub' instead in the source filesThomas Huth
'vlan' is very confusing since it does not mean something like IEEE 802.1Q, but rather emulated hubs, so let's switch to that terminology instead. Buglink: https://bugs.launchpad.net/qemu/+bug/658904 Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-05-14net: Remove the deprecated "vlan" parameterThomas Huth
It's been marked as deprecated since QEMU v2.9.0, so that should have been enough time for everybody to either just drop unnecessary "vlan=0" parameters, to switch to the modern -device + -netdev syntax for connecting guest NICs with host network backends, or to switch to the "hubport" netdev in case hubs are really wanted instead. Buglink: https://bugs.launchpad.net/qemu/+bug/658904 Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-05-14net: Fix memory leak in net_param_nic()Thomas Huth
The early exits in case of errors leak the memory allocated for nd_id. Fix it by using a "goto out" to the cleanup at the end of the function instead. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-26net/vde: print error on vde_open() failureJulia Suvorova via Qemu-devel
Despite the fact that now when the initialization of vde fails, qemu does not end silently, no informative error is printed. The patch generates an error and pushes it through the calling function. Related bug: https://bugs.launchpad.net/qemu/+bug/676029 Signed-off-by: Julia Suvorova <jusual@mail.ru> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-26virtio_net: flush uncompleted TX on resetGreg Kurz
If the backend could not transmit a packet right away for some reason, the packet is queued for asynchronous sending. The corresponding vq element is tracked in the async_tx.elem field of the VirtIONetQueue, for later freeing when the transmission is complete. If a reset happens before completion, virtio_net_tx_complete() will push async_tx.elem back to the guest anyway, and we end up with the inuse flag of the vq being equal to -1. The next call to virtqueue_pop() is then likely to fail with "Virtqueue size exceeded". This can be reproduced easily by starting a guest with an hubport backend that is not connected to a functional network, eg, -device virtio-net-pci,netdev=hub0 -netdev hubport,id=hub0,hubid=0 and no other -netdev hubport,hubid=0 on the command line. The appropriate fix is to ensure that such an asynchronous transmission cannot survive a device reset. So for all queues, we first try to send the packet again, and eventually we purge it if the backend still could not deliver it. CC: qemu-stable@nongnu.org Reported-by: R. Nageswara Sastry <nasastry@in.ibm.com> Buglink: https://github.com/open-power-host-os/qemu/issues/37 Signed-off-by: Greg Kurz <groug@kaod.org> Tested-by: R. Nageswara Sastry <nasastry@in.ibm.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Mon 05 Mar 2018 03:06:59 GMT # gpg: using RSA key EF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: tap: setting error appropriately when calling net_init_tap_one() hw/net: Remove unnecessary header includes net: Add a new convenience option "--nic" to configure default/on-board NICs net: Remove the deprecated 'host_net_add' and 'host_net_remove' HMP commands net: Remove the deprecated way of dumping network packets net: Make net_client_init() static net: Only show vhost-user in the help text if CONFIG_POSIX is defined net: List available netdevs with "-netdev help" net: Move error reporting from net_init_client/netdev to the calling site Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-05tap: setting error appropriately when calling net_init_tap_one()Jay Zhou
If netdev_add tap,id=net0,...,vhost=on failed in net_init_tap_one(), the followed up device_add virtio-net-pci,netdev=net0 will fail too, prints: TUNSETOFFLOAD ioctl() failed: Bad file descriptor TUNSETOFFLOAD ioctl() failed: Bad file descriptor The reason is that the fd of tap is closed when error occured after calling net_init_tap_one(). The fd should be closed when calling net_init_tap_one failed: - if tap_set_sndbuf() failed - if tap_set_sndbuf() succeeded but vhost failed to open or initialize with vhostforce flag on - with wrong vhost command line parameter The fd should not be closed just because vhost failed to open or initialize but without vhostforce flag. So the followed up device_add can fall back to userspace virtio successfully. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: Add a new convenience option "--nic" to configure default/on-board NICsThomas Huth
The legacy "-net" option can be quite confusing for the users since most people do not expect to get a "vlan" hub between their emulated guest hardware and the host backend. But so far, we are also not able to get rid of "-net" completely, since it is the only way to configure on-board NICs that can not be instantiated via "-device" yet. It's also a little bit shorter to type "-net nic -net tap" instead of "-device xyz,netdev=n1 -netdev tap,id=n1". So what we need is a new convenience option that is shorter to type than the full -device + -netdev stuff, and which can be used to configure the on-board NICs that can not be handled via -device yet. Thus this patch now provides such a new option "--nic": It adds an entry in the nd_table to configure a on-board / default NIC, creates a host backend and connects the two directly, without a confusing "vlan" hub inbetween. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: Remove the deprecated 'host_net_add' and 'host_net_remove' HMP commandsThomas Huth
They are deprecated since QEMU v2.10, and so far nobody complained that these commands are still necessary for any reason - and since you can use 'netdev_add' and 'netdev_remove' instead, there also should not be any real reason. Since they are also standing in the way for the upcoming 'vlan' clean-up, it's now time to remove them. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: Remove the deprecated way of dumping network packetsThomas Huth
"-net dump" has been marked as deprecated since QEMU v2.10, since it only works with the deprecated 'vlan' parameter (or hubs). Network dumping should be done with "-object filter-dump" nowadays instead. Since nobody complained so far about the deprecation message, let's finally get rid of "-net dump" now. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: Make net_client_init() staticThomas Huth
The function is only used within net.c, so there's no need that this is a global function. While we're at it, also remove the unused prototype compute_mcast_idx() (the function has been removed in commit d9caeb09b107e91122d10ba4a08a). Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: List available netdevs with "-netdev help"Thomas Huth
Other options like "-chardev" or "-device" feature a nice help text with the available devices when being called with "help" or "?". Since it is quite useful, especially if you want to see which network backends have been compiled into the QEMU binary, let's provide such a help text for "-netdev", too. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: Move error reporting from net_init_client/netdev to the calling siteThomas Huth
It looks strange that net_init_client() and net_init_netdev() both take an "Error **errp" parameter, but then do the error reporting with "error_report_err(local_err)" on their own. Let's move the error reporting to the calling site instead to simplify this code a little bit. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-02qapi: Move qapi-schema.json to qapi/, rename generated filesMarkus Armbruster
Move qapi-schema.json to qapi/, so it's next to its modules, and all files get generated to qapi/, not just the ones generated for modules. Consistently name the generated files qapi-MODULE.EXT: qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch]. This gets rid of the temporary hacks in scripts/qapi/commands.py, scripts/qapi/events.py, and scripts/qapi/common.py. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-28-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> [eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02Include less of the generated modular QAPI headersMarkus Armbruster
In my "build everything" tree, a change to the types in qapi-schema.json triggers a recompile of about 4800 out of 5100 objects. The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h, qapi-types.h. Each of these headers still includes all its shards. Reduce compile time by including just the shards we actually need. To illustrate the benefits: adding a type to qapi/migration.json now recompiles some 2300 instead of 4800 objects. The next commit will improve it further. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-24-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-01vhost-user: fix memory leaklinzhecheng
g_free() was moved from vhost_net_cleanup in commit e6bcb1b, so we should free net after vhost_net_cleanup Signed-off-by: linzhecheng <linzhecheng@huawei.com> Reviewed-by: Marc-André Lureau < marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-02-13net/can: support for connecting to Linux host SocketCAN interface.Pavel Pisa
Connection to the real host CAN bus network through SocketCAN network interface is available only for Linux host system. Mechanism is generic, support for another CAN API and operating systems can be implemented in future. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-13net/can: simple messages transport implementation for QEMUPavel Pisa
The CanBusState state structure is created for each emulated CAN channel. Individual clients/emulated CAN interfaces or host interface connection registers to the bus by CanBusClientState structure. The CAN core is prepared to support connection to the real host CAN bus network. The commit with such support for Linux SocketCAN follows. Implementation is as simple as possible. There is no state to be migrated, and messages prioritization and queuing are not considered for now. But it is intended to be extended when need arises. Development repository and more documentation at https://gitlab.fel.cvut.cz/canbus/qemu-canbus The work is based on Jin Yang GSoC 2013 work funded by Google and mentored in frame of RTEMS project GSoC slot donated to QEMU. Rewritten for QEMU-2.0+ versions and architecture cleanup by Pavel Pisa (Czech Technical University in Prague). Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-09Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster
qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09Include qapi/qmp/qdict.h exactly where neededMarkus Armbruster
This cleanup makes the number of objects depending on qapi/qmp/qdict.h drop from 4550 (out of 4743) to 368 in my "build everything" tree. For qapi/qmp/qobject.h, the number drops from 4552 to 390. While there, separate #include from file comment with a blank line. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2018-02-09Drop superfluous includes of qapi/qmp/qerror.hMarkus Armbruster
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-6-armbru@redhat.com>
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-09Drop superfluous includes of qapi-types.h and test-qapi-types.hMarkus Armbruster
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-4-armbru@redhat.com>
2018-01-29net: Allow netdevs to be used with 'hostfwd_add' and 'hostfwd_remove'Thomas Huth
It does not make much sense to limit these commands to the legacy 'vlan' concept only, they should work with the modern netdevs, too. So now it is possible to use this command with one, two or three parameters. With one parameter, the command installs a hostfwd rule on the default "user" network: hostfwd_add tcp:... With two parameters, the command installs a hostfwd rule on a netdev (that's the new way of using this command): hostfwd_add netdev_id tcp:... With three parameters, the command installs a rule on a 'vlan' (aka hub): hostfwd_add hub_id name tcp:... Same applies to the hostfwd_remove command now. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-01-29net: Allow hubports to connect to other netdevsThomas Huth
QEMU can emulate hubs to connect NICs and netdevs. This is currently primarily used for the mis-named 'vlan' feature of the networking subsystem. Now the 'vlan' feature has been marked as deprecated, since its name is rather confusing and the users often rather mis-configure their network when trying to use it. But while the 'vlan' parameter should be removed at one point in time, the basic idea of emulating a hub in QEMU is still good: It's useful for bundling up the output of multiple NICs into one single l2tp netdev for example. Now to be able to use the hubport feature without 'vlan's, there is one missing piece: The possibility to connect a hubport to a netdev, too. This patch adds this possibility by introducing a new "netdev=..." parameter to the hubports. To bundle up the output of multiple NICs into one socket netdev, you can now run QEMU with these parameters for example: qemu-system-ppc64 ... -netdev socket,id=s1,connect=:11122 \ -netdev hubport,hubid=1,id=h1,netdev=s1 \ -netdev hubport,hubid=1,id=h2 -device e1000,netdev=h2 \ -netdev hubport,hubid=1,id=h3 -device virtio-net-pci,netdev=h3 For using the socket netdev, you have got to start another QEMU as the receiving side first, for example with network dumping enabled: qemu-system-x86_64 -M isapc -netdev socket,id=s0,listen=:11122 \ -device ne2k_isa,netdev=s0 \ -object filter-dump,id=f1,netdev=s0,file=/tmp/dump.dat After the ppc64 guest tried to boot from both NICs, you can see in the dump file (using Wireshark, for example), that the output of both NICs (the e1000 and the virtio-net-pci) has been successfully transfered via the socket netdev in this case. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-01-29colo: compare the packet based on the tcp sequence numberMao Zhongyi
Packet size some time different or when network is busy. Based on same payload size, but TCP protocol can not guarantee send the same one packet in the same way, like that: We send this payload: ------------------------------ | header |1|2|3|4|5|6|7|8|9|0| ------------------------------ primary: ppkt1: ---------------- | header |1|2|3| ---------------- ppkt2: ------------------------ | header |4|5|6|7|8|9|0| ------------------------ secondary: spkt1: ------------------------------ | header |1|2|3|4|5|6|7|8|9|0| ------------------------------ In the original method, ppkt1 and ppkt2 are different in size and spkt1, so they can't compare and trigger the checkpoint. I have tested FTP get 200M and 1G file many times, I found that the performance was less than 1% of the native. Now I reconstructed the comparison of TCP packets based on the TCP sequence number. first of all, ppkt1 and spkt1 have the same starting sequence number, so they can compare, even though their length is different. And then ppkt1 with a smaller payload length is used as the comparison length, if the payload is same, send out the ppkt1 and record the offset(the length of ppkt1 payload) in spkt1. The next comparison, ppkt2 and spkt1 can be compared from the recorded position of spkt1. like that: ---------------- | header |1|2|3| ppkt1 ---------|-----| | | ---------v-----v-------------- | header |1|2|3|4|5|6|7|8|9|0| spkt1 ---------------|\------------| | \offset | ---------v-------------v | header |4|5|6|7|8|9|0| ppkt2 ------------------------ In this way, the performance can reach native 20% in my multiple tests. Cc: Zhang Chen <zhangckid@gmail.com> Cc: Li Zhijian <lizhijian@cn.fujitsu.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Zhang Chen <zhangckid@gmail.com> Reviewed-by: Zhang Chen <zhangckid@gmail.com> Tested-by: Zhang Chen <zhangckid@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-01-29colo: modified the payload compare functionMao Zhongyi
Modified the function colo_packet_compare_common to prepare for the tcp packet comparison in the next patch. Cc: Zhang Chen <zhangckid@gmail.com> Cc: Li Zhijian <lizhijian@cn.fujitsu.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Zhang Chen <zhangckid@gmail.com> Reviewed-by: Zhang Chen <zhangckid@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-12-22net: Remove the legacy "-net channel" parameterThomas Huth
It has never been documented, so hardly anybody knows about this parameter, and it is marked as deprecated since QEMU v2.6. Time to let it go now. Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-12-22net: remove unused compute_mcast_idx() functionMark Cave-Ayland
Now that all of the callers have been converted to compute the multicast index inline using new net CRC functions, this function can now be dropped. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-12-22net: introduce net_crc32_le() functionMark Cave-Ayland
This provides a standard ethernet CRC32 little-endian implementation. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-12-22net: move CRC32 calculation from compute_mcast_idx() into its own ↵Mark Cave-Ayland
net_crc32() function Separate out the standard ethernet CRC32 calculation into a new net_crc32() function, renaming the constant POLYNOMIAL to POLYNOMIAL_BE to make it clear that this is a big-endian CRC32 calculation. As part of the constant rename, remove the duplicate definition of POLYNOMIAL from eepro100.c and use the new POLYNOMIAL_BE constant instead. Once this is complete remove the existing CRC32 implementation from compute_mcast_idx() and call the new net_crc32() function in its place. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-12-18misc: remove headers implicitly includedPhilippe Mathieu-Daudé
applied using ./scripts/clean-includes Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Ben Warren <ben@skyportsystems.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-11-20colo-compare: fix the dangerous assignmentMao Zhongyi
Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Zhang Chen <zhangckid@gmail.com> Cc: Li Zhijian <lizhijian@cn.fujitsu.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Fixes: 8ec14402029d783720f4312ed8a925548e1dad61 Reported-by: Peter Maydell <peter.maydell@linaro.org> Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-11-13net/socket: fix coverity issueJens Freimann
This fixes coverity issue CID1005339. Make sure that saddr is not used uninitialized if the mcast parameter is NULL. Cc: qemu-stable@nongnu.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jens Freimann <jfreimann@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-11-13colo: Consolidate the duplicate code chunk into a routineMao Zhongyi
Consolidate the code that extract the ip address(src,dst) and port number(src,dst) of the packet into a separate routine extract_ip_and_port() since the same chunk of code is called from two place. Cc: Zhang Chen <zhangckid@gmail.com> Cc: Li Zhijian <lizhijian@cn.fujitsu.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-13 23:50:14 +0000