aboutsummaryrefslogtreecommitdiff
path: root/migration
AgeCommit message (Collapse)Author
2021-06-15memory: Introduce RAM_NORESERVE and wire it up in qemu_ram_mmap()David Hildenbrand
Let's introduce RAM_NORESERVE, allowing mmap'ing with MAP_NORESERVE. The new flag has the following semantics: " RAM is mmap-ed with MAP_NORESERVE. When set, reserving swap space (or huge pages if applicable) is skipped: will bail out if not supported. When not set, the OS will do the reservation, if supported for the memory type. " Allow passing it into: - memory_region_init_ram_nomigrate() - memory_region_init_resizeable_ram() - memory_region_init_ram_from_file() ... and teach qemu_ram_mmap() and qemu_anon_ram_alloc() about the flag. Bail out if the flag is not supported, which is the case right now for both, POSIX and win32. We will add Linux support next and allow specifying RAM_NORESERVE via memory backends. The target use case is virtio-mem, which dynamically exposes memory inside a large, sparse memory area to the VM. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210510114328.21835-9-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-14migration: use GDateTime for formatting timestamp in snapshot namesDaniel P. Berrangé
The GDateTime APIs provided by GLib avoid portability pitfalls, such as some platforms where 'struct timeval.tv_sec' field is still 'long' instead of 'time_t'. When combined with automatic cleanup, GDateTime often results in simpler code too. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-06-14migration: add trace point when vm_stop_force_state failsDaniel P. Berrangé
This is a critical failure scenario for migration that is hard to diagnose from existing probes. Most likely it is caused by an error from bdrv_flush(), but we're not logging the errno anywhere, hence this new probe. Reviewed-by: Connor Kuehl <ckuehl@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-06-11Remove migrate_set_block_enabled in checkpointRao, Lei
We can detect disk migration in migrate_prepare, if disk migration is enabled in COLO mode, we can directly report an error.and there is no need to disable block migration at every checkpoint. Signed-off-by: Lei Rao <lei.rao@intel.com> Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Lukas Straub <lukasstraub2@web.de> Tested-by: Lukas Straub <lukasstraub2@web.de> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-06-08hmp: Add "calc_dirty_rate" and "info dirty_rate" cmdsPeter Xu
These two commands are missing when adding the QMP sister commands. Add them, so developers can play with them easier. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn> Message-Id: <4cc0039fc3ad6145136770cf3b0f056c09a2910b.1623027729.git.huangy81@chinatelecom.cn> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-06-08migration/dirtyrate: make sample page count configurableHyman Huang(黄勇)
introduce optional sample-pages argument in calc-dirty-rate, making sample page count per GB configurable so that more accurate dirtyrate can be calculated. Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn> Message-Id: <3103453a3b2796f929269c99a6ad81a9a7f1f405.1623027729.git.huangy81@chinatelecom.cn> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Wrapped a couple of long lines
2021-06-08migration/socket: Close the listener at the endDr. David Alan Gilbert
Delay closing the listener until the cleanup hook at the end; mptcp needs the listener to stay open while the other paths come in. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210421112834.107651-5-dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-06-08migration: Add cleanup hook for inwards migrationDr. David Alan Gilbert
Add a cleanup hook for incoming migration that gets called at the end as a way for a transport to allow cleanup. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210421112834.107651-4-dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-06-08migration/rdma: Fix cm event use after freeLi Zhijian
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Message-Id: <20210602023506.3821293-1-lizhijian@cn.fujitsu.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-06-08yank: Unregister function when using TLS migrationLeonardo Bras
After yank feature was introduced in migration, whenever migration is started using TLS, the following error happens in both source and destination hosts: (qemu) qemu-kvm: ../util/yank.c:107: yank_unregister_instance: Assertion `QLIST_EMPTY(&entry->yankfns)' failed. This happens because of a missing yank_unregister_function() when using qio-channel-tls. Fix this by also allowing TYPE_QIO_CHANNEL_TLS object type to perform yank_unregister_function() in channel_close() and multifd_load_cleanup(). Also, inside migration_channel_connect() and migration_channel_process_incoming() move yank_register_function() so it only runs once on a TLS migration. Fixes: b5eea99ec2f ("migration: Add yank feature", 2021-01-13) Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1964326 Signed-off-by: Leonardo Bras <leobras.c@gmail.com> Reviewed-by: Lukas Straub <lukasstraub2@web.de> Reviewed-by: Peter Xu <peterx@redhat.com> -- Changes since v2: - Dropped all references to ioc->master - yank_register_function() and yank_unregister_function() now only run once in a TLS migration. Changes since v1: - Cast p->c to QIOChannelTLS into multifd_load_cleanup() Message-Id: <20210601054030.1153249-1-leobras.c@gmail.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-27Merge remote-tracking branch ↵Peter Maydell
'remotes/dgilbert/tags/pull-migration-20210526a' into staging Virtiofs, migration and hmp pull 2021-05-26 Fixes for a loadvm regression from Kevin, some virtiofsd cleanups from Vivek and Mahmoud, and some RDMA migration fixups from Li. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> # gpg: Signature made Wed 26 May 2021 18:43:30 BST # gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full] # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-migration-20210526a: migration/rdma: source: poll cm_event from return path migration/rdma: destination: create the return patch after the first accept migration/rdma: Fix rdma_addrinfo res leaks migration/rdma: cleanup rdma in rdma_start_incoming_migration error path migration/rdma: Fix cm_event used before being initialized tools/virtiofsd/fuse_opt.c: Replaced a malloc with GLib's g_try_malloc tools/virtiofsd/buffer.c: replaced a calloc call with GLib's g_try_new0 virtiofsd: Set req->reply_sent right after sending reply virtiofsd: Check EOF before short read virtiofsd: Simplify skip byte logic virtiofsd: get rid of in_sg_left variable virtiofsd: Use iov_discard_front() to skip bytes virtiofsd: Get rid of unreachable code in read virtiofsd: Check for EINTR in preadv() and retry hmp: Fix loadvm to resume the VM on success instead of failure Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-26migration/rdma: source: poll cm_event from return pathLi Zhijian
source side always blocks if postcopy is only enabled at source side. users are not able to cancel this migration in this case. Let source side have chance to cancel this migration Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Message-Id: <20210525080552.28259-4-lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Typo fix
2021-05-26migration/rdma: destination: create the return patch after the first acceptLi Zhijian
destination side: $ build/qemu-system-x86_64 -enable-kvm -netdev tap,id=hn0,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown -device e1000,netdev=hn0,mac=50:52:54:00:11:22 -boot c -drive if=none,file=./Fedora-rdma-server-migration.qcow2,id=drive-virtio-disk0 -device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 -m 2048 -smp 2 -device piix3-usb-uhci -device usb-tablet -monitor stdio -vga qxl -spice streaming-video=filter,port=5902,disable-ticketing -incoming rdma:192.168.1.10:8888 (qemu) migrate_set_capability postcopy-ram on (qemu) dest_init RDMA Device opened: kernel name rocep1s0f0 uverbs device name uverbs0, infiniband_verbs class device path /sys/class/infiniband_verbs/uverbs0, infiniband class device path /sys/class/infiniband/rocep1s0f0, transport: (2) Ethernet Segmentation fault (core dumped) (gdb) bt #0 qemu_rdma_accept (rdma=0x0) at ../migration/rdma.c:3272 #1 rdma_accept_incoming_migration (opaque=0x0) at ../migration/rdma.c:3986 #2 0x0000563c9e51f02a in aio_dispatch_handler (ctx=ctx@entry=0x563ca0606010, node=0x563ca12b2150) at ../util/aio-posix.c:329 #3 0x0000563c9e51f752 in aio_dispatch_handlers (ctx=0x563ca0606010) at ../util/aio-posix.c:372 #4 aio_dispatch (ctx=0x563ca0606010) at ../util/aio-posix.c:382 #5 0x0000563c9e4f4d9e in aio_ctx_dispatch (source=<optimized out>, callback=<optimized out>, user_data=<optimized out>) at ../util/async.c:306 #6 0x00007fe96ef3fa9f in g_main_context_dispatch () at /lib64/libglib-2.0.so.0 #7 0x0000563c9e4ffeb8 in glib_pollfds_poll () at ../util/main-loop.c:231 #8 os_host_main_loop_wait (timeout=12188789) at ../util/main-loop.c:254 #9 main_loop_wait (nonblocking=nonblocking@entry=0) at ../util/main-loop.c:530 #10 0x0000563c9e3c7211 in qemu_main_loop () at ../softmmu/runstate.c:725 #11 0x0000563c9dfd46fe in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at ../softmmu/main.c:50 The rdma return path will not be created when qemu incoming is starting since migrate_copy() is false at that moment, then a NULL return path rdma was referenced if the user enabled postcopy later. Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Message-Id: <20210525080552.28259-3-lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-26migration/rdma: Fix rdma_addrinfo res leaksLi Zhijian
rdma_freeaddrinfo() is the reverse operation of rdma_getaddrinfo() Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20210525080552.28259-2-lizhijian@cn.fujitsu.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-26migration/rdma: cleanup rdma in rdma_start_incoming_migration error pathLi Zhijian
the error path after calling qemu_rdma_dest_init() should do rdma cleanup Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Message-Id: <20210520081148.17001-1-lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-26migration/rdma: Fix cm_event used before being initializedLi Zhijian
A segmentation fault was triggered when i try to abort a postcopy + rdma migration. since rdma_ack_cm_event releases a uninitialized cm_event in these case. like below: 2496 ret = rdma_get_cm_event(rdma->channel, &cm_event); 2497 if (ret) { 2498 perror("rdma_get_cm_event after rdma_connect"); 2499 ERROR(errp, "connecting to destination!"); 2500 rdma_ack_cm_event(cm_event); <<<< cause segmentation fault 2501 goto err_rdma_source_connect; 2502 } Refer to the rdma_get_cm_event() code, cm_event will be updated/changed only if rdma_get_cm_event() returns 0. So it's okey to remove the ack in error patch. Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Message-Id: <20210519064740.10828-1-lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-26replication: move include out of root directoryPaolo Bonzini
The replication.h file is included from migration/colo.c and tests/unit/test-replication.c, so it should be in include/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-14Merge remote-tracking branch ↵Peter Maydell
'remotes/thuth-gitlab/tags/pull-request-2021-05-14' into staging * Replace YAML anchors by extends in the gitlab-CI yaml files * Many small qtest fixes (e.g. to fix issues discovered by Coverity) * Poison more config switches in common code * Fix the failing Travis-CI and Cirrus-CI tasks # gpg: Signature made Fri 14 May 2021 12:17:39 BST # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/thuth-gitlab/tags/pull-request-2021-05-14: cirrus.yml: Fix the MSYS2 task pc-bios/s390-ccw: Fix inline assembly for older versions of Clang tests/qtest/migration-test: Use g_autofree to avoid leaks on error paths configure: Poison all current target-specific #defines migration: Move populate_vfio_info() into a separate file include/sysemu: Poison all accelerator CONFIG switches in common code tests: Avoid side effects inside g_assert() arguments tests/qtest/rtc-test: Remove pointless NULL check tests/qtest/tpm-util.c: Free memory with correct free function tests/migration-test: Fix "true" vs true tests/qtest/npcm7xx_pwm-test.c: Avoid g_assert_true() for non-test assertions tests/qtest/ahci-test.c: Calculate iso_size with 64-bit arithmetic util/compatfd.c: Replaced a malloc call with g_malloc. libqtest: refuse QTEST_QEMU_BINARY=qemu-kvm docs/devel/qgraph: add troubleshooting information libqos/qgraph: fix "UNAVAILBLE" typo gitlab-ci: Replace YAML anchors by extends (native_test_job) gitlab-ci: Replace YAML anchors by extends (native_build_job) gitlab-ci: Replace YAML anchors by extends (container_job) tests/docker/dockerfiles: Add ccache to containers where it was missing Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-14migration: Move populate_vfio_info() into a separate fileThomas Huth
The CONFIG_VFIO switch only works in target specific code. Since migration/migration.c is common code, the #ifdef does not have the intended behavior here. Move the related code to a separate file now which gets compiled via specific_ss instead. Fixes: 3710586caa ("qapi: Add VFIO devices migration stats in Migration stats") Message-Id: <20210414112004.943383-3-thuth@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-13migration/ram: Use offset_in_ramblock() in range checksDavid Hildenbrand
We never read or write beyond the used_length of memory blocks when migrating. Make this clearer by using offset_in_ramblock() consistently. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210429112708.12291-11-david@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13migration/multifd: Print used_length of memory blockDavid Hildenbrand
We actually want to print the used_length, against which we check. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210429112708.12291-10-david@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13migration/ram: Handle RAM block resizes during postcopyDavid Hildenbrand
Resizing while migrating is dangerous and does not work as expected. The whole migration code works with the usable_length of a ram block and does not expect this value to change at random points in time. In the case of postcopy, relying on used_length is racy as soon as the guest is running. Also, when used_length changes we might leave the uffd handler registered for some memory regions, reject valid pages when migrating and fail when sending the recv bitmap to the source. Resizing can be trigger *after* (but not during) a reset in ACPI code by the guest - hw/arm/virt-acpi-build.c:acpi_ram_update() - hw/i386/acpi-build.c:acpi_ram_update() Let's remember the original used_length in a separate variable and use it in relevant postcopy code. Make sure to update it when we resize during precopy, when synchronizing the RAM block sizes with the source. Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210429112708.12291-9-david@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13migration/ram: Simplify host page handling in ram_load_postcopy()David Hildenbrand
Add two new helper functions. This will come in come handy once we want to handle ram block resizes while postcopy is active. Note that ram_block_from_stream() will already print proper errors. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210429112708.12291-8-david@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> dgilbert: Added brackets in host_page_from_ram_block_offset to cause uintptr_t to cast the sum, to fix armhf-cross build
2021-05-13migration/ram: Discard RAM when growing RAM blocks after ↵David Hildenbrand
ram_postcopy_incoming_init() In case we grow our RAM after ram_postcopy_incoming_init() (e.g., when synchronizing the RAM block state with the migration source), the resized part would not get discarded. Let's perform that when being notified about a resize while postcopy has been advised, but is not listening yet. With precopy, the process is as following: 1. VM created - RAM blocks are created 2. Incomming migration started - Postcopy is advised - All pages in RAM blocks are discarded 3. Precopy starts - RAM blocks are resized to match the size on the migration source. - RAM pages from precopy stream are loaded - Uffd handler is registered, postcopy starts listening 4. Guest started, postcopy running - Pagefaults get resolved, pages get placed Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210429112708.12291-7-david@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13migration/ram: Handle RAM block resizes during precopyDavid Hildenbrand
Resizing while migrating is dangerous and does not work as expected. The whole migration code works on the usable_length of ram blocks and does not expect this to change at random points in time. In the case of precopy, the ram block size must not change on the source, after syncing the RAM block list in ram_save_setup(), so as long as the guest is still running on the source. Resizing can be trigger *after* (but not during) a reset in ACPI code by the guest - hw/arm/virt-acpi-build.c:acpi_ram_update() - hw/i386/acpi-build.c:acpi_ram_update() Use the ram block notifier to get notified about resizes. Let's simply cancel migration and indicate the reason. We'll continue running on the source. No harm done. Update the documentation. Postcopy will be handled separately. Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210429112708.12291-5-david@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Manual merge
2021-05-13migration: Drop redundant query-migrate result @blockedMarkus Armbruster
Result @blocked is redundant. Unfortunately, we realized this too close to the release to risk dropping it, so we deprecated it instead, in commit e11ce6c06. Since it was deprecated from the start, we can delete it without the customary grace period. Do so. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210429140424.2802929-1-armbru@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13migration/ram: Optimize ram_save_host_page()Kunkun Jiang
Starting from pss->page, ram_save_host_page() will check every page and send the dirty pages up to the end of the current host page or the boundary of used_length of the block. If the host page size is a huge page, the step "check" will take a lot of time. It will improve performance to use migration_bitmap_find_dirty(). Tested on Kunpeng 920; VM parameters: 1U 4G (page size 1G) The time of ram_save_host_page() in the last round of ram saving: before optimize: 9250us after optimize: 34us Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20210316125716.1243-3-jiangkunkun@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13migration/ram: Reduce unnecessary rate limitingKunkun Jiang
When the host page is a huge page and something is sent in the current iteration, migration_rate_limit() should be executed. If not, it can be omitted. Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com> Reviewed-by: David Edmondson <david.edmondson@oracle.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20210316125716.1243-2-jiangkunkun@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13migrate/ram: remove "ram_bulk_stage" and "fpo_enabled"David Hildenbrand
The bulk stage is kind of weird: migration_bitmap_find_dirty() will indicate a dirty page, however, ram_save_host_page() will never save it, as migration_bitmap_clear_dirty() detects that it is not dirty. We already fill the bitmap in ram_list_init_bitmaps() with ones, marking everything dirty - it didn't used to be that way, which is why we needed an explicit first bulk stage. Let's simplify: make the bitmap the single source of thuth. Explicitly handle the "xbzrle_enabled after first round" case. Regarding XBZRLE (implicitly handled via "ram_bulk_stage = false" right now), there is now a slight change in behavior: - Colo: When starting, it will be disabled (was implicitly enabled) until the first round actually finishes. - Free page hinting: When starting, XBZRLE will be disabled (was implicitly enabled) until the first round actually finished. - Snapshots: When starting, XBZRLE will be disabled. We essentially only do a single run, so I guess it will never actually get disabled. Postcopy seems to indirectly disable it in ram_save_page(), so there shouldn't be really any change. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Juan Quintela <quintela@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210216105039.40680-1-david@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-02Do not include cpu.h if it's not really necessaryThomas Huth
Stop including cpu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-4-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02Do not include sysemu/sysemu.h if it's not really necessaryThomas Huth
Stop including sysemu/sysemu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-2-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-04-07migration: Rename 'bs' to 'block' in background snapshot codeAndrey Gruzdev
Rename 'bs' to commonly used 'block' in migration/ram.c background snapshot code. Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com> Reported-by: David Hildenbrand <david@redhat.com> Message-Id: <20210401092226.102804-5-andrey.gruzdev@virtuozzo.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-04-07migration: Pre-fault memory before starting background snasphotAndrey Gruzdev
This commit solves the issue with userfault_fd WP feature that background snapshot is based on. For any never poluated or discarded memory page, the UFFDIO_WRITEPROTECT ioctl() would skip updating PTE for that page, thereby loosing WP setting for it. So we need to pre-fault pages for each RAM block to be protected before making a userfault_fd wr-protect ioctl(). Fixes: 278e2f551a095b234de74dca9c214d5502a1f72c (migration: support UFFD write fault processing in ram_save_iterate()) Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com> Reported-by: David Hildenbrand <david@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20210401092226.102804-4-andrey.gruzdev@virtuozzo.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> dgilbert: Bodged ifdef __linux__ on ram_write_tracking_prepare, should really go in a stub
2021-04-06migration: Inhibit virtio-balloon for the duration of background snapshotAndrey Gruzdev
The same thing as for incoming postcopy - we cannot deal with concurrent RAM discards when using background snapshot feature in outgoing migration. Fixes: 8518278a6af589ccc401f06e35f171b1e6fae800 (migration: implementation of background snapshot thread) Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com> Reported-by: David Hildenbrand <david@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20210401092226.102804-3-andrey.gruzdev@virtuozzo.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-04-06migration: Fix missing qemu_fflush() on buffer file in bg_migration_threadAndrey Gruzdev
Added missing qemu_fflush() on buffer file holding precopy device state. Increased initial QIOChannelBuffer allocation to 512KB to avoid reallocs. Typical configurations often require >200KB for device state and VMDESC. Fixes: 8518278a6af589ccc401f06e35f171b1e6fae800 (migration: implementation of background snapshot thread) Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com> Message-Id: <20210401092226.102804-2-andrey.gruzdev@virtuozzo.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-04-01Merge remote-tracking branch 'remotes/marcandre/tags/for-6.0-pull-request' ↵Peter Maydell
into staging For 6.0 misc patches under my radar. V2: - "tests: Add tests for yank with the chardev-change case" updated - drop the readthedoc theme patch # gpg: Signature made Thu 01 Apr 2021 12:54:52 BST # gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5 # gpg: issuer "marcandre.lureau@redhat.com" # gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full] # gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full] # Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5 * remotes/marcandre/tags/for-6.0-pull-request: tests: Add tests for yank with the chardev-change case chardev: Fix yank with the chardev-change case chardev/char.c: Always pass id to chardev_new chardev/char.c: Move object_property_try_add_child out of chardev_new yank: Always link full yank code yank: Remove dependency on qiochannel docs: simplify each section title dbus-vmstate: Increase the size of input stream buffer used during load util: fix use-after-free in module_load_one Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-01yank: Remove dependency on qiochannelLukas Straub
Remove dependency on qiochannel by removing yank_generic_iochannel and letting migration and chardev use their own yank function for iochannel. Signed-off-by: Lukas Straub <lukasstraub2@web.de> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20ff143fc2db23e27cd41d38043e481376c9cec1.1616521341.git.lukasstraub2@web.de>
2021-04-01meson: Propagate gnutls dependency to migrationJessica Clarke
Commit 3eacf70bb5a83e4775ad8003cbca63a40f70c8c2 neglected to fix this for softmmu configs, which pull in migration's use of gnutls. This fixes the following compilation failure on Arm-based Macs: In file included from migration/multifd.c:23: In file included from migration/tls.h:25: In file included from include/io/channel-tls.h:26: In file included from include/crypto/tlssession.h:24: include/crypto/tlscreds.h:28:10: fatal error: 'gnutls/gnutls.h' file not found #include <gnutls/gnutls.h> ^~~~~~~~~~~~~~~~~ 1 error generated. (as well as for channel.c and tls.c) Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20210320171221.37437-1-jrtc27@jrtc27.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-24migration/block-dirty-bitmap: make incoming disabled bitmaps busyVladimir Sementsov-Ogievskiy
Incoming enabled bitmaps are busy, because we do bdrv_dirty_bitmap_create_successor() for them. But disabled bitmaps being migrated are not marked busy, and user can remove them during the incoming migration. Then we may crash in cancel_incoming_locked() when try to remove the bitmap that was already removed by user, like this: #0 qemu_mutex_lock_impl (mutex=0x5593d88c50d1, file=0x559680554b20 "../block/dirty-bitmap.c", line=64) at ../util/qemu-thread-posix.c:77 #1 bdrv_dirty_bitmaps_lock (bs=0x5593d88c0ee9) at ../block/dirty-bitmap.c:64 #2 bdrv_release_dirty_bitmap (bitmap=0x5596810e9570) at ../block/dirty-bitmap.c:362 #3 cancel_incoming_locked (s=0x559680be8208 <dbm_state+40>) at ../migration/block-dirty-bitmap.c:918 #4 dirty_bitmap_load (f=0x559681d02b10, opaque=0x559680be81e0 <dbm_state>, version_id=1) at ../migration/block-dirty-bitmap.c:1194 #5 vmstate_load (f=0x559681d02b10, se=0x559680fb5810) at ../migration/savevm.c:908 #6 qemu_loadvm_section_part_end (f=0x559681d02b10, mis=0x559680fb4a30) at ../migration/savevm.c:2473 #7 qemu_loadvm_state_main (f=0x559681d02b10, mis=0x559680fb4a30) at ../migration/savevm.c:2626 #8 postcopy_ram_listen_thread (opaque=0x0) at ../migration/savevm.c:1871 #9 qemu_thread_start (args=0x5596817ccd10) at ../util/qemu-thread-posix.c:521 #10 start_thread () at /lib64/libpthread.so.0 #11 clone () at /lib64/libc.so.6 Note bs pointer taken from bitmap: it's definitely bad aligned. That's because we are in use after free, bitmap is already freed. So, let's make disabled bitmaps (being migrated) busy during incoming migration. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20210322094906.5079-2-vsementsov@virtuozzo.com>
2021-03-18migrate: remove QMP/HMP commands for speed, downtime and cache sizeDaniel P. Berrangé
The generic 'migrate_set_parameters' command handle all types of param. Only the QMP commands were documented in the deprecations page, but the rationale for deprecating applies equally to HMP, and the replacements exist. Furthermore the HMP commands are just shims to the QMP commands, so removing the latter breaks the former unless they get re-implemented. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-15migration: Replaced qemu_mutex_lock calls with QEMU_LOCK_GUARDMahmoud Mandour
Replaced various qemu_mutex_lock calls and their respective qemu_mutex_unlock calls with QEMU_LOCK_GUARD macro. This simplifies the code by eliminating the respective qemu_mutex_unlock calls. Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com> Message-Id: <20210311031538.5325-7-ma.mandourr@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-03-15migration/tls: add error handling in multifd_tls_handshake_threadHao Wang
If any error happens during multifd send thread creating (e.g. channel broke because new domain is destroyed by the dst), multifd_tls_handshake_thread may exit silently, leaving main migration thread hanging (ram_save_setup -> multifd_send_sync_main -> qemu_sem_wait(&p->sem_sync)). Fix that by adding error handling in multifd_tls_handshake_thread. Signed-off-by: Hao Wang <wanghao232@huawei.com> Message-Id: <20210209104237.2250941-3-wanghao232@huawei.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Chuan Zheng <zhengchuan@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-03-15migration/tls: fix inverted semantics in multifd_channel_connectHao Wang
Function multifd_channel_connect() return "true" to indicate failure, which is rather confusing. Fix that. Signed-off-by: Hao Wang <wanghao232@huawei.com> Message-Id: <20210209104237.2250941-2-wanghao232@huawei.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Chuan Zheng <zhengchuan@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-12migration: dirty-bitmap: Allow control of bitmap persistencePeter Krempa
Bitmap's source persistence is transported over the migration stream and the destination mirrors it. In some cases the destination might want to persist bitmaps which are not persistent on the source (e.g. the result of merging bitmaps from a number of layers on the source when migrating into a squashed image) but currently it would need to create another set of persistent bitmaps and merge them. This patch adds a 'transform' property to the alias map which allows overriding the persistence of migrated bitmaps both on the source and destination sides. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Message-Id: <b20afb675917b86f6359ac3591166ac6d4233573.1613150869.git.pkrempa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: grammar tweaks, drop dead conditional] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-12migration: dirty-bitmap: Use struct for alias map inner membersPeter Krempa
Currently the alias mapping hash stores just strings of the target objects internally. In further patches we'll be adding another member which will need to be stored in the map so pass a copy of the whole BitmapMigrationBitmapAlias QAPI struct into the map. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Message-Id: <fc5f27e1fe16cb75e08a248c2d938de3997b9bfb.1613150869.git.pkrempa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: adjust long lines] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-08migration: only check page size match if RAM postcopy is enabledStefan Reiter
Postcopy may also be advised for dirty-bitmap migration only, in which case the remote page size will not be available and we'll instead read bogus data, blocking migration with a mismatch error if the VM uses hugepages. Fixes: 58110f0acb ("migration: split common postcopy out of ram postcopy") Signed-off-by: Stefan Reiter <s.reiter@proxmox.com> Message-Id: <20210204163522.13291-1-s.reiter@proxmox.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08migration: introduce snapshot-{save, load, delete} QMP commandsDaniel P. Berrangé
savevm, loadvm and delvm are some of the few HMP commands that have never been converted to use QMP. The reasons for the lack of conversion are that they blocked execution of the event thread, and the semantics around choice of disks were ill-defined. Despite this downside, however, libvirt and applications using libvirt have used these commands for as long as QMP has existed, via the "human-monitor-command" passthrough command. IOW, while it is clearly desirable to be able to fix the problems, they are not a blocker to all real world usage. Meanwhile there is a need for other features which involve adding new parameters to the commands. This is possible with HMP passthrough, but it provides no reliable way for apps to introspect features, so using QAPI modelling is highly desirable. This patch thus introduces new snapshot-{load,save,delete} commands to QMP that are intended to replace the old HMP counterparts. The new commands are given different names, because they will be using the new QEMU job framework and thus will have diverging behaviour from the HMP originals. It would thus be misleading to keep the same name. While this design uses the generic job framework, the current impl is still blocking. The intention that the blocking problem is fixed later. None the less applications using these new commands should assume that they are asynchronous and thus wait for the job status change event to indicate completion. In addition to using the job framework, the new commands require the caller to be explicit about all the block device nodes used in the snapshot operations, with no built-in default heuristics in use. Note that the existing "query-named-block-nodes" can be used to query what snapshots currently exist for block nodes. Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210204124834.774401-13-berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> dgilbert: removed tests for now, the output ordering isn't deterministic
2021-02-08migration: introduce a delete_snapshot wrapperDaniel P. Berrangé
Make snapshot deletion consistent with the snapshot save and load commands by using a wrapper around the blockdev layer. The main difference is that we get upfront validation of the passed in device list (if any). Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210204124834.774401-10-berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08migration: wire up support for snapshot device selectionDaniel P. Berrangé
Modify load_snapshot/save_snapshot to accept the device list and vmstate node name parameters previously added to the block layer. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210204124834.774401-9-berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-29 06:56:20 +0000