aboutsummaryrefslogtreecommitdiff
path: root/meson.build
AgeCommit message (Collapse)Author
2023-05-16meson: Detect atomic128 support with optimizationRichard Henderson
There is an edge condition prior to gcc13 for which optimization is required to generate 16-byte atomic sequences. Detect this. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-16configure: make clear that VirtFS is 9pChristian Schoenebeck
Add '9P' to the summary output section of 'VirtFS' to avoid being confused with virtiofs. Based-on: <20230503130757.863824-1-pefoley@google.com> Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <E1px7Id-0000NE-OQ@lizzy.crudebyte.com>
2023-05-16Don't require libcap-ng for virtfs supportPeter Foley
It's only required for the proxy helper. Add a new option for the proxy helper rather than enabling it implicitly. Change-Id: I95b73fca625529e99d16b0a64e01c65c0c1d43f2 Signed-off-by: Peter Foley <pefoley@google.com> Message-Id: <20230503130757.863824-1-pefoley@google.com> [C.S.: - Resolve merge conflict. ] Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
2023-05-15block/block-backend: add block layer APIs resembling Linux ZonedBlockDevice ↵Sam Li
ioctls Add zoned device option to host_device BlockDriver. It will be presented only for zoned host block devices. By adding zone management operations to the host_block_device BlockDriver, users can use the new block layer APIs including Report Zone and four zone management operations (open, close, finish, reset, reset_all). Qemu-io uses the new APIs to perform zoned storage commands of the device: zone_report(zrp), zone_open(zo), zone_close(zc), zone_reset(zrs), zone_finish(zf). For example, to test zone_report, use following command: $ ./build/qemu-io --image-opts -n driver=host_device, filename=/dev/nullb0 -c "zrp offset nr_zones" Signed-off-by: Sam Li <faithilikerun@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20230508045533.175575-4-faithilikerun@gmail.com Message-id: 20230324090605.28361-4-faithilikerun@gmail.com [Adjust commit message prefix as suggested by Philippe Mathieu-Daudé <philmd@linaro.org> and remove spurious ret = -errno in raw_co_zone_mgmt(). --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-05-11disas: Move disas.c to disas/Richard Henderson
Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230503072331.1747057-80-richard.henderson@linaro.org>
2023-05-10Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into stagingRichard Henderson
Block layer patches - Graph locking, part 3 (more block drivers) - Compile out assert_bdrv_graph_readable() by default - Add configure options for vmdk, vhdx and vpc - Fix use after free in blockdev_mark_auto_del() - migration: Attempt disk reactivation in more failure scenarios - Coroutine correctness fixes # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmRbi6ERHGt3b2xmQHJl # ZGhhdC5jb20ACgkQfwmycsiPL9Y66A//ZRk/0M6EZUJPAKG6m/XLTDNrOCNBZ1Tu # kBGvxXsVQZMt4gGpBad4l2INN6IQKTIdIf+lK71EpxMPmFG6xK32btn38yywCAfQ # lr1p5nR0Y/zSlT+XzP4yKy/CtQl6U0rkysmjCIk35bZc7uLy6eo4oFR4vmhRRt2M # UGltB50/Nicx12YFufVjodbhv+apxTGwS2XHatmwqtjKeYReSz8mJHslEy6DvC8m # ziNThD6YBy7hMktAhNaqUqtZD0OSWz66VMObco/4i2++sOAMZIspXQkjv3AjH74e # lmgMhNc/xgJKPwFBPsj6F7dOKxwhdKD9jzZlx3yaBtAU18hpWX54QWuA3/CFlySc # 5QbbqIstFTC8lqoRWThQrcHHRKbDBJCP4ImRXUIKhuPaxEzXA9zb3+f3QPTIjLSA # KO7nxuSmO+tC7hQ1K9kAjRZHWlxxAk4clk+7UrK4UrWgGxfCUKgFg4Tyx7RrpwA6 # j4L5vwAY60LW74tikWe9xJx2QbdRoWBTTZhUyirbO7rLX1e8mS1nUWmtIsFSQxAq # Z7nX7ygN0WEF+8qIsk3jTGaEeJoCM7+7B+X2RpSy0sftFjFYmybIiUgLMO7e+ozK # rvUPnwlHAbGCVIJOKrUDj3cGt6k3/xnrTajUc7pCB3KKqG4pe+IlZuHyKIUMActb # dBLaBnj0M2o= # =hw9E # -----END PGP SIGNATURE----- # gpg: Signature made Wed 10 May 2023 01:18:41 PM BST # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] * tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (28 commits) block: compile out assert_bdrv_graph_readable() by default block: Mark bdrv_refresh_limits() and callers GRAPH_RDLOCK block: Mark bdrv_recurse_can_replace() and callers GRAPH_RDLOCK block: Mark bdrv_query_block_graph_info() and callers GRAPH_RDLOCK block: Mark bdrv_query_bds_stats() and callers GRAPH_RDLOCK block: Mark BlockDriver callbacks for amend job GRAPH_RDLOCK block: Mark bdrv_co_debug_event() GRAPH_RDLOCK block: Mark bdrv_co_get_info() and callers GRAPH_RDLOCK block: Mark bdrv_co_get_allocated_file_size() and callers GRAPH_RDLOCK mirror: Require GRAPH_RDLOCK for accessing a node's parent list vhdx: Require GRAPH_RDLOCK for accessing a node's parent list nbd: Mark nbd_co_do_establish_connection() and callers GRAPH_RDLOCK nbd: Remove nbd_co_flush() wrapper function block: .bdrv_open is non-coroutine and unlocked graph-lock: Fix GRAPH_RDLOCK_GUARD*() to be reader lock graph-lock: Add GRAPH_UNLOCKED(_PTR) test-bdrv-drain: Don't modify the graph in coroutines iotests: Test resizing image attached to an iothread block: Don't call no_coroutine_fns in qmp_block_resize() block: bdrv/blk_co_unref() for calls in coroutine context ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-10block: compile out assert_bdrv_graph_readable() by defaultStefan Hajnoczi
reader_count() is a performance bottleneck because the global aio_context_list_lock mutex causes thread contention. Put this debugging assertion behind a new ./configure --enable-debug-graph-lock option and disable it by default. The --enable-debug-graph-lock option is also enabled by the more general --enable-debug option. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20230501173443.153062-1-stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-05-10block: add configure options for excluding vmdk, vhdx and vpcVladimir Sementsov-Ogievskiy
Let's add --enable / --disable configure options for these formats, so that those who don't need them may not build them. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Message-Id: <20230421092758.814122-1-vsementsov@yandex-team.ru> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-05-10Merge tag 'pull-qapi-2023-05-09-v2' of https://repo.or.cz/qemu/armbru into ↵Richard Henderson
staging QAPI patches patches for 2023-05-09 # -----BEGIN PGP SIGNATURE----- # # iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmRbUEYSHGFybWJydUBy # ZWRoYXQuY29tAAoJEDhwtADrkYZTmzEP/3pDpVxpP7xXLevl2vFqkFyHEjc0L3N4 # x//ljgQojAdM6WU3e0qqOfp/NE2ktUg5D3z+QNiVP1/xXv/dtMGATdG+X9AZs0US # XnhdicYdBng8bGuhlNuNY8QJ/I4ALwUR44LVOYibVohv2RVYWBapGiHowpyTyABq # sFSHrj/cgvTMUn53yp7veZTo6rWG6RU/D5uUTOMsvKeAoHoOXMyBxV01SCt84t/J # pcelINcriP6cQVzgfm1B39UNa0IxinGxEx/IIaxz5Ju66G05HTs4CsBFAF6/0QI/ # 3YerGWPt9fF6+qYNn21Gg9CL1fHHppNqTXkcuTeGn/Ohg53bosktti5Ysn73vtpR # GWsJr6M4KQ1SwEbZIiFZCS3A4VTbRcr7WkXets39pcpxGDlNisi+zfV95kNo09xR # hxi8SuWgb2OfQpVs/71eunp+PM1ZQsODurcy4x0/rlYJfhk53kQSMRtlfy5Cn6uY # +weWUgygBSWG/w0qanWWK5TF1DNlRKzbix6cmMuGGKcpyF7EMWE1kqmjmmu7CQvM # a3aPTqGtUt0LeqBQIhmeq/jEwd3vxQa1R85gd0/0sWxEMHkPXVfVoaryiaWAykye # 7r+c8o/41c44zs8YxdZrz72su9fqKC/TeVf5soU46ZucmH8D6f7QHy+s1ec2PEjY # l6cRIXTXHeQe # =j6cJ # -----END PGP SIGNATURE----- # gpg: Signature made Wed 10 May 2023 09:05:26 AM BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [undefined] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * tag 'pull-qapi-2023-05-09-v2' of https://repo.or.cz/qemu/armbru: qapi: Reformat doc comments to conform to current conventions qga/qapi-schema: Reformat doc comments to conform to current conventions docs/devel/qapi-code-gen: Update doc comment conventions qapi: Section parameter @indent is no longer used, drop qapi: Relax doc string @name: description indentation rules qapi: Rewrite parsing of doc comment section symbols and tags qapi: Fix argument description indentation stripping tests/qapi-schema/doc-good: Improve argument description tests tests/qapi-schema/doc-good: Improve a comment qapi/dump: Indent bulleted lists consistently qapi: Tidy up a slightly awkward TODO comment sphinx/qapidoc: Do not emit TODO sections into user manuals Revert "qapi: BlockExportRemoveMode: move comments to TODO" meson: Fix to make QAPI generator output depend on main.py qapi: Fix crash on stray double quote character docs/devel/qapi-code-gen: Turn FIXME admonitions into comments docs/devel/qapi-code-gen: Clean up use of quotes a bit Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-09meson: Fix to make QAPI generator output depend on main.pyMarkus Armbruster
@qapi_gen_depends is missing scripts/qapi/main.py. Fix that, and drop a duplicate scripts/qapi/common.py. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230428105429.1687850-5-armbru@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com>
2023-05-08meson: leave unnecessary modules out of the buildPaolo Bonzini
meson.build files choose whether to build modules based on foo.found() expressions. If a feature is enabled (e.g. --enable-gtk), these expressions are true even if the code is not used by any emulator, and this results in an unexpected difference between modular and non-modular builds. For non-modular builds, the files are not included in any binary, and therefore the source files are never processed. For modular builds, however, all .so files are unconditionally built by default, and therefore a normal "make" tries to build them. However, the corresponding trace-*.h files are absent due to this conditional: if have_system trace_events_subdirs += [ ... 'ui', ... ] endif which was added to avoid wasting time running tracetool on unused trace-events files. This causes a compilation failure; fix it by skipping module builds entirely if (depending on the module directory) have_block or have_system are false. Reported-by: Michael Tokarev <mjt@tls.msk.ru> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-05audio/pwaudio.c: Add Pipewire audio backend for QEMUDorinda Bassey
This commit adds a new audiodev backend to allow QEMU to use Pipewire as both an audio sink and source. This backend is available on most systems Add Pipewire entry points for QEMU Pipewire audio backend Add wrappers for QEMU Pipewire audio backend in qpw_pcm_ops() qpw_write function returns the current state of the stream to pwaudio and Writes some data to the server for playback streams using pipewire spa_ringbuffer implementation. qpw_read function returns the current state of the stream to pwaudio and reads some data from the server for capture streams using pipewire spa_ringbuffer implementation. These functions qpw_write and qpw_read are called during playback and capture. Added some functions that convert pw audio formats to QEMU audio format and vice versa which would be needed in the pipewire audio sink and source functions qpw_init_in() & qpw_init_out(). These methods that implement playback and recording will create streams for playback and capture that will start processing and will result in the on_process callbacks to be called. Built a connection to the Pipewire sound system server in the qpw_audio_init() method. Signed-off-by: Dorinda Bassey <dbassey@redhat.com> Reviewed-by: Volker Rümelin <vr_qemu@t-online.de> Message-Id: <20230417105654.32328-1-dbassey@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2023-05-02migration/xbzrle: Use __attribute__((target)) for avx512Richard Henderson
Use the attribute, which is supported by clang, instead of the #pragma, which is not supported and, for some reason, also not detected by the meson probe, so we fail by -Werror. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20230501210555.289806-1-richard.henderson@linaro.org>
2023-03-28util: import GTree as QTreeEmilio Cota
The only reason to add this implementation is to control the memory allocator used. Some users (e.g. TCG) cannot work reliably in multi-threaded environments (e.g. forking in user-mode) with GTree's allocator, GSlice. See https://gitlab.com/qemu-project/qemu/-/issues/285 for details. Importing GTree is a temporary workaround until GTree migrates away from GSlice. This implementation is identical to that in glib v2.75.0, except that we don't import recent additions to the API nor deprecated API calls, none of which are used in QEMU. I've imported tests from glib and added a benchmark just to make sure that performance is similar. Note: it cannot be identical because (1) we are not using GSlice, (2) we use different compilation flags (e.g. -fPIC) and (3) we're linking statically. $ cat /proc/cpuinfo| grep 'model name' | head -1 model name : AMD Ryzen 7 PRO 5850U with Radeon Graphics $ echo '0' | sudo tee /sys/devices/system/cpu/cpufreq/boost $ tests/bench/qtree-bench Tree Op 32 1024 4096 131072 1048576 ------------------------------------------------------------------------------------------------ GTree Lookup 83.23 43.08 25.31 19.40 16.22 QTree Lookup 113.42 (1.36x) 53.83 (1.25x) 28.38 (1.12x) 17.64 (0.91x) 13.04 (0.80x) GTree Insert 44.23 29.37 25.83 19.49 17.03 QTree Insert 46.87 (1.06x) 25.62 (0.87x) 24.29 (0.94x) 16.83 (0.86x) 12.97 (0.76x) GTree Remove 53.27 35.15 31.43 24.64 16.70 QTree Remove 57.32 (1.08x) 41.76 (1.19x) 38.37 (1.22x) 29.30 (1.19x) 15.07 (0.90x) GTree RemoveAll 135.44 127.52 126.72 120.11 64.34 QTree RemoveAll 127.15 (0.94x) 110.37 (0.87x) 107.97 (0.85x) 97.13 (0.81x) 55.10 (0.86x) GTree Traverse 277.71 276.09 272.78 246.72 98.47 QTree Traverse 370.33 (1.33x) 411.97 (1.49x) 400.23 (1.47x) 262.82 (1.07x) 78.52 (0.80x) ------------------------------------------------------------------------------------------------ As a sanity check, the same benchmark when Glib's version is >= $glib_dropped_gslice_version (i.e. QTree == GTree): Tree Op 32 1024 4096 131072 1048576 ------------------------------------------------------------------------------------------------ GTree Lookup 82.72 43.09 24.18 19.73 16.09 QTree Lookup 81.82 (0.99x) 43.10 (1.00x) 24.20 (1.00x) 19.76 (1.00x) 16.26 (1.01x) GTree Insert 45.07 29.62 26.34 19.90 17.18 QTree Insert 45.72 (1.01x) 29.60 (1.00x) 26.38 (1.00x) 19.71 (0.99x) 17.20 (1.00x) GTree Remove 54.48 35.36 31.77 24.97 16.95 QTree Remove 54.46 (1.00x) 35.32 (1.00x) 31.77 (1.00x) 24.91 (1.00x) 17.15 (1.01x) GTree RemoveAll 140.68 127.36 125.43 121.45 68.20 QTree RemoveAll 140.65 (1.00x) 127.64 (1.00x) 125.01 (1.00x) 121.73 (1.00x) 67.06 (0.98x) GTree Traverse 278.68 276.05 266.75 251.65 104.93 QTree Traverse 278.31 (1.00x) 275.78 (1.00x) 266.42 (1.00x) 247.89 (0.99x) 104.58 (1.00x) ------------------------------------------------------------------------------------------------ Signed-off-by: Emilio Cota <cota@braap.org> Message-Id: <20230205163758.416992-2-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-03-13ui/dbus: do not require opengl & gbmMarc-André Lureau
Allow to build & use the DBus display without 3d/GPU acceleration support. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2023-03-05tracing: remove transform.pyRichard Henderson
This file, and a couple of uses, got left behind when the tcg stuff was removed from tracetool. Fixes: 126d4123c50a ("tracing: excise the tcg related from tracetool") Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-03-01hw/xen: Implement emulated PIRQ hypercall supportDavid Woodhouse
This wires up the basic infrastructure but the actual interrupts aren't there yet, so don't advertise it to the guest. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
2023-03-01xen: add CONFIG_XEN_BUS and CONFIG_XEN_EMU options for Xen emulationDavid Woodhouse
The XEN_EMU option will cover core Xen support in target/, which exists only for x86 with KVM today but could theoretically also be implemented on Arm/Aarch64 and with TCG or other accelerators (if anyone wants to run the gauntlet of struct layout compatibility, errno mapping, and the rest of that fui). It will also cover the support for architecture-independent grant table and event channel support which will be added in hw/i386/kvm/ (on the basis that the non-KVM support is very theoretical and making it not use KVM directly seems like gratuitous overengineering at this point). The XEN_BUS option is for the xenfv platform support, which will now be used both by XEN_EMU and by real Xen. The XEN option remains dependent on the Xen runtime libraries, and covers support for real Xen. Some code which currently resides under CONFIG_XEN will be moving to CONFIG_XEN_BUS over time as the direct dependencies on Xen runtime libraries are eliminated. The Xen PCI platform device will also reside under CONFIG_XEN_BUS. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
2023-02-27cpu: Remove capstone meson dependencyPhilippe Mathieu-Daudé
Only disas.c requires capstone CFLAGS, not cpu.c. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20221130135241.85060-2-philmd@linaro.org>
2023-02-24Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into stagingPeter Maydell
* x86 bugfixes * OpenBSD support for naming threads * Refined Python support policy # -----BEGIN PGP SIGNATURE----- # # iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmP0wtkUHHBib256aW5p # QHJlZGhhdC5jb20ACgkQv/vSX3jHroNI6QgAjMvEV0N5FZYMpiuQdjebBeV+uHM6 # LThewCQa0cW5jb1X1NFBbOxYlNfE3WQeZqQF+BiVJr5wT2UsyNsPH7wTjsP387vV # juoD7D/XZo8P4Qi+vJWo8XVBrzWEK8QS1P+NxWr+ZnsAhDx2+MR87fVmHtVBW1pI # oDO0iyRrvVtaTAIVyNWSgZ59SLMmcH/6L4aYv5nrKYuAWx7fTneGGheKuqk55RsV # sMv+fHolmmwKVm8tMFksw0atPwL7ZmSm1uObNHCQKdDNSoakC7YpaXa3y8LEzU7I # B4h/PsmRpN33ggvsiuzFp9kfEHMy4QazfpoVFFqTLalhTr+XuiNTxj8xdA== # =6eNN # -----END PGP SIGNATURE----- # gpg: Signature made Tue 21 Feb 2023 13:10:49 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * tag 'for-upstream' of https://gitlab.com/bonzini/qemu: target/i386/gdbstub: Fix a bug about order of FPU stack in 'g' packets. docs: build-platforms: refine requirements on Python build dependencies thread-posix: add support for setting threads name on OpenBSD target/i386: Fix 32-bit AD[CO]X insns in 64-bit mode Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-21sysemu/os-win32: fix setjmp/longjmp on windows-arm64Pierrick Bouvier
Windows implementation of setjmp/longjmp is done in C:/WINDOWS/system32/ucrtbase.dll. Alas, on arm64, it seems to *always* perform stack unwinding, which crashes from generated code. By using alternative implementation built in mingw, we avoid doing stack unwinding and this fixes crash when calling longjmp. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230221153006.20300-3-pierrick.bouvier@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-02-21Merge tag 'pr-2023-02-16' of https://gitlab.com/a1xndr/qemu into stagingPeter Maydell
Replace fork-based fuzzing with reboots. Now the fuzzers will reboot the guest between inputs. # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCgAdFiEE+tTiv4cTddY0BRfETmYd3lg6lk4FAmPu/LoACgkQTmYd3lg6 # lk6RHg/7BRGI5ZPXb1MmTNCC+SroQ6TT++lO4b0hbkN2HO6U+WVvfuA6+0wg+8qC # 4bp+G1Tabpcq1MTYUuim6DBtWswgpqr0AbWNwn1eF7hya+3W9woH2POVYY2wwc7m # S3EdwXCCKo9gGXlaNrotnbwIk+o8B4BzXOXLIlRtg26wGYhT5fkJA/BQcHKDXz37 # ctyWxlyjIM8pNCgfybMvjC7MYtp8DufPsv/rrKx9t0TM7f1jPVgXLek7t0+ZwjeY # qz2Om2jiij1INgK9hTieWs4eHwpwre6vH2a+JKRkZ3sS7WYcj1auNKVJb3GvDqmc # wy+Nz5Lz4+aPP19pkCYjfz5w3CqEEsSlSDn5UVRbfl2fbENSceoNwo9huMXsF1pB # oO6NK2NxbOygmNpYxp+JEt45KFIXzUcIFQwbn8aCDODIl+0H2yu7/ll6XgELf1Pa # P83THOaVxIxfcI9VOdt/FwDq1ZzmV5nk/BkIGJeIWNYMbU4Gze6YoaL3U8AHDxKH # f6f3qDzcVJjqD0wKhvYcQ3kSPq+vHc/ioh6mYwos6VUEVYz/SLOY876MaSB/K4PE # ofBV7y6HvJ6AMwg1TBg4YtOP08gWK+4sYH+I09oU40U3UcwEpkbkQTF72lPQHxFs # 8UVRJrgWv/xzrwzXTX5ruQ633F8zuhqQTeERqksj1pPHJ3NdHps= # =F6qI # -----END PGP SIGNATURE----- # gpg: Signature made Fri 17 Feb 2023 04:04:10 GMT # gpg: using RSA key FAD4E2BF871375D6340517C44E661DDE583A964E # gpg: Good signature from "Alexander Bulekov <alxndr@bu.edu>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: FAD4 E2BF 8713 75D6 3405 17C4 4E66 1DDE 583A 964E * tag 'pr-2023-02-16' of https://gitlab.com/a1xndr/qemu: docs/fuzz: remove mentions of fork-based fuzzing fuzz: remove fork-fuzzing scaffolding fuzz/i440fx: remove fork-based fuzzer fuzz/virtio-blk: remove fork-based fuzzer fuzz/virtio-net: remove fork-based fuzzer fuzz/virtio-scsi: remove fork-based fuzzer fuzz/generic-fuzz: add a limit on DMA bytes written fuzz/generic-fuzz: use reboots instead of forks to reset state fuzz: add fuzz_reset API hw/sparse-mem: clear memory on reset Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-17thread-posix: add support for setting threads name on OpenBSDBrad Smith
Make use of pthread_set_name_np() to be able to set the threads name on OpenBSD. Signed-off-by: Brad Smith <brad@comstyle.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <Y57NrCmPTVSXLWC4@humpty.home.comstyle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-02-16fuzz: remove fork-fuzzing scaffoldingAlexander Bulekov
Fork-fuzzing provides a few pros, but our implementation prevents us from using fuzzers other than libFuzzer, and may be causing issues such as coverage-failure builds on OSS-Fuzz. It is not a great long-term solution as it depends on internal implementation details of libFuzzer (which is no longer in active development). Remove it in favor of other methods of resetting state between inputs. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
2023-02-16virtiofsd: Remove build and docs glueDr. David Alan Gilbert
Remove all the virtiofsd build and docs infrastructure. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-02-14build: deprecate --enable-gprof builds and remove from CIAlex Bennée
As gprof relies on instrumentation you rarely get useful data compared to a real optimised build. Lets deprecate the build option and simplify the CI configuration as a result. Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1338 Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230131094224.861621-1-alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-02-14meson: Disable libdw for static builds by defaultIlya Leoshkevich
Static QEMU build fails on Debian Bullseye: /usr/bin/ld: /usr/lib/x86_64-linux-gnu/libdw.a(debuginfod-client.o): in function `__libdwfl_debuginfod_init': (.text.startup+0x17): undefined reference to `dlopen' The reason is that pkg-config does not suggest -ldl for libdw, and adding --extra-ldflags="-ldl" resolves the issue. However, static linking with libdw is an unclear topic: * Linux perf does it. * Debian's libdw-dev description says: Only link to the static version for special cases and when you don't need anything from the ebl backends. * As the error message above indicates, -ldl is also needed for debuginfod support. The functionality provided by libdw is needed for analyzing performance of JITed code, which is mostly useful to developers and researchers. Therefore, in order to avoid unpleasant surprises for people who don't need this, simply disable libdw for static builds by default. It can still be enabled explicitly if needed. Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Message-Id: <20230210005208.438142-2-iii@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-02-14meson: Add missing libdw knobsIlya Leoshkevich
Add the missing meson infrastructure bits for the new libdw dependency. Model them after the existing capstone knobs. Fixes: 7c10cb38ccb8 ("accel/tcg: Add debuginfo support") Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20230210005208.438142-1-iii@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-02-11AVX512 support for xbzrle_encode_bufferling xu
This commit is the same with [PATCH v6 1/2], and provides avx512 support for xbzrle_encode_buffer function to accelerate xbzrle encoding speed. Runtime check of avx512 support and benchmark for this feature are added. Compared with C version of xbzrle_encode_buffer function, avx512 version can achieve 50%-70% performance improvement on benchmarking. In addition, if dirty data is randomly located in 4K page, the avx512 version can achieve almost 140% performance gain. Signed-off-by: ling xu <ling1.xu@intel.com> Co-authored-by: Zhou Zhao <zhou.zhao@intel.com> Co-authored-by: Jun Jin <jun.i.jin@intel.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2023-02-04Merge tag 'linux-user-for-8.0-pull-request' of ↵Peter Maydell
https://gitlab.com/laurent_vivier/qemu into staging linux-user branch pull request 20230204 Implement execveat() un-parent OBJECT(cpu) when closing thread Revert fix for glibc >= 2.36 sys/mount.h Fix/update strace move target_flat.h to target subdirs Fix SO_ERROR return code of getsockopt() Fix /proc/cpuinfo output for hppa Add emulation for MADV_WIPEONFORK and MADV_KEEPONFORK in madvise() Implement SOL_ALG encryption support linux-user: Allow sendmsg() without IOV # -----BEGIN PGP SIGNATURE----- # # iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmPeguUSHGxhdXJlbnRA # dml2aWVyLmV1AAoJEPMMOL0/L748tnQP/1A4eu33pLe4+tjBuDGt2zcGAVuz+wN9 # rcwN5BQgjILwfECfRsy9QIkC8+M496tLk4W7pNkW9x/GSpzBp9x0+066uUghsa1Q # c0bFU0FM8xpywEXvOrz3LvEWaWqeBV/R+XYMqKFaiBQXf/5kmmteei9guH42L3gV # a+d0s1cWT48TslTaga9ECbiPD9lK+yfW879+wRhex1/BetkJPzLU1hZB4vfC5YQo # XagcmLWiseT4U8uCysikOgKQE4g2bv1oJXUuYjBxW15s5/llg8e57dEboO7MFEPK # a9P3Hl1qiA5Ol3scF1I7WURmGP6UVfdhTYe1aKYHhKY7QVBVjbU7r/NkdQ3dR6Nv # db58Lkurnrf5dMksZk8+25F/fvJT0nZpnbipunZejetNjrDVPk19XK5E6kJf91hk # 3W3vOeWMp4QjThpqghnlQ3gm2XfVmCGSMIOywTKZ4/M/TP28+9zY7GZqQXQXCBMy # nJFahfVTCfiYaGAYGjlMe5CMOQ6tJ6lwxuTCl9O1X565ifMBNUj3rcte1FvO/i24 # Rk0/lQVO+tD9ImxHJrei0Y2C0xzo7V8kaB9+foAf6Ku91SY1X1FIOm81DEyAhK61 # Biv2zlNwUV0aCierrn3oLuDkviVaAg6FkLO9snPG+lQy2uxgyJJ2/Pv0OCZhniWI # 9WifjYZKAXDa # =AcC6 # -----END PGP SIGNATURE----- # gpg: Signature made Sat 04 Feb 2023 16:08:05 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * tag 'linux-user-for-8.0-pull-request' of https://gitlab.com/laurent_vivier/qemu: (22 commits) linux-user: Allow sendmsg() without IOV linux-user: Implement SOL_ALG encryption support linux-user: Enhance strace output for various syscalls linux-user: Show 4th argument of rt_sigprocmask() in strace linux-user: Add emulation for MADV_WIPEONFORK and MADV_KEEPONFORK in madvise() linux-user: Improve strace output of personality() and sysinfo() linux-user: Fix /proc/cpuinfo output for hppa linux-user: Fix SO_ERROR return code of getsockopt() linux-user: move target_flat.h to target subdirs linux-user: Improve strace output of getgroups() and setgroups() linux-user: Add strace output for clock_getres_time64() and futex_time64() Revert "linux-user: fix compat with glibc >= 2.36 sys/mount.h" Revert "linux-user: add more compat ioctl definitions" linux-user: add more netlink protocol constants linux-user: fix strace build w/out munlockall linux-user: un-parent OBJECT(cpu) when closing thread linux-user: Add missing MAP_HUGETLB and MAP_STACK flags in strace linux-user/syscall: Implement execveat() linux-user/syscall: Extract do_execve() from do_syscall1() linux-user/strace: Add output for execveat() syscall ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-04Merge tag 'pull-monitor-2023-02-03-v2' of https://repo.or.cz/qemu/armbru ↵Peter Maydell
into staging Monitor patches for 2023-02-03 # -----BEGIN PGP SIGNATURE----- # # iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmPeAkgSHGFybWJydUBy # ZWRoYXQuY29tAAoJEDhwtADrkYZTUagP/iZ24jXaWoFOKaO70wdQ/tdoQObWZnUV # 8xJNJYmYYbWoiq9wQXHebi/yEgBudso1lLzAnp8lsF12ybnNV1zsjyV/yumEKSNW # 3nL1NZIcuY9IDmCe97clY9nm9H2lUhjjyCG3gnjg+uC3JjlSjO/T8lbkdT+fYnkR # AInVTCPYFjSO9MIOhN0WNIY73HlAjr4zx5TEgS/D4pFj6iGq2qEniSDGMRf+/fVr # uSbIXbQlum+VAdxbGMSVf8yQPlNcFUXUpSJrbgJE272H6saQuvn5mkwD0RcYXyaI # OlfXpATDRNTsP3yYImxgr7y29Exo1HnCuC6T1n/+fwkirtMR3a7X6XjaQwFsWcrx # xxGiHQOve3r/I3DAO6A64T2ceD/XuI43LygqkkljfuoXifnJz7Lo39P9HrY0dhpC # KSld2n/Vv4xYyykvqAzpvzijwq679ILIbTplhm9gOrfrDRZjWad3uLAcYxsTXXR8 # BQbHGovcAzTOEx/0Quo3NThpAeNYPGyrPz3xBIV+XtPJGWvFsrA/s/po4qWDTmF6 # UTzPoEmznsD+DRboNOKfinCsOnpTAru4gbXevi7sfmMHQbLYN5xgsrF7WdlaxWa6 # 4QbJyNUq0O+aL0gyfVLuiZBCQ32Jaz1WvowK856Yl4jwczP5HM0ujyyM75+Kx072 # PdnMgxYYLSij # =d+wL # -----END PGP SIGNATURE----- # gpg: Signature made Sat 04 Feb 2023 06:59:20 GMT # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * tag 'pull-monitor-2023-02-03-v2' of https://repo.or.cz/qemu/armbru: (35 commits) monitor: Rename misc.c to hmp-target.c monitor: Loosen coupling between misc.c and monitor.c slightly monitor: Move remaining QMP stuff from misc.c to qmp-cmds.c monitor: Move remaining HMP commands from misc.c to hmp-cmds.c monitor: Move target-dependent HMP commands to hmp-cmds-target.c monitor: Move monitor_putc() next to monitor_puts & external linkage monitor: Split file descriptor passing stuff off misc.c qdev: Move HMP command completion from monitor to softmmu/ acpi: Move the QMP command from monitor/ to hw/acpi/ stats: Move HMP commands from monitor/ to stats/ stats: Move QMP commands from monitor/ to stats/ runstate: Move HMP commands from monitor/ to softmmu/ tpm: Move HMP commands from monitor/ to softmmu/ virtio: Move HMP commands from monitor/ to hw/virtio/ migration: Move the QMP command from monitor/ to migration/ migration: Move HMP commands from monitor/ to migration/ net: Move hmp_info_network() to net-hmp-cmds.c net: Move HMP commands from monitor to net/ hmp: Rewrite strlist_from_comma_list() as hmp_split_at_comma() rocker: Move HMP commands from monitor to hw/net/rocker/ ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-04stats: Move QMP commands from monitor/ to stats/Markus Armbruster
This moves these commands from MAINTAINERS section "QMP" to new section "Stats". Status is Orphan. Volunteers welcome! Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230124121946.1139465-23-armbru@redhat.com>
2023-02-03Revert "linux-user: fix compat with glibc >= 2.36 sys/mount.h"Daniel P. Berrangé
This reverts commit 3cd3df2a9584e6f753bb62a0028bd67124ab5532. glibc has fixed (in 2.36.9000-40-g774058d729) the problem that caused a clash when both sys/mount.h annd linux/mount.h are included, and backported this to the 2.36 stable release too: https://sourceware.org/glibc/wiki/Release/2.36#Usage_of_.3Clinux.2Fmount.h.3E_and_.3Csys.2Fmount.h.3E It is saner for QEMU to remove the workaround it applied for glibc 2.36 and expect distros to ship the 2.36 maint release with the fix. This avoids needing to add a further workaround to QEMU to deal with the fact that linux/brtfs.h now also pulls in linux/mount.h via linux/fs.h since Linux 6.1 Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230110174901.2580297-3-berrange@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-02-02Merge tag 'pull-jan-omnibus-020223-1' of https://gitlab.com/stsquad/qemu ↵Peter Maydell
into staging Testing, docs, semihosting and plugin updates - update playbooks for custom runners - add section timing support to gitlab - upgrade fedora images to 37 - purge perl from the build system and deps - disable unstable tests in CI - improve intro, emulation and semihosting docs - semihosting bug fix and O_BINARY default - add memory-sve test - fix some races in qht - improve plugin handling of memory helpers - optimise plugin hooks - fix some plugin deadlocks - reduce win64-cross build time by dropping some targets # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmPb3fgACgkQ+9DbCVqe # KkQbXAf9Eoc+PdNvafbqzH/blPjvd9ve8pJ+GcPDukNXwxP8OF/jFEJUQ1E7l9O7 # y0qV4akKCdIqVice4R5bK2CAq44Y3aut8SDf56C8E3Riha2zA2RbQWOv/zCvA3OP # LFF+OaXZyg4JTR48HUKzh9ei2bd1+ccBSUe+xlRi59XaV5K8+5bmcZj10QKUR0lD # 0HC5auEWWpayvd5D7Da15C7+oVY3LMCFxSdpHwbuIPPan/TRo5yqMI6ChYDKB8QD # gdwMCL8znj2ADCTBftyBDYDAtjKVyLQidf7KdQHiSF+nmXYopS6SbsPCOMtJqCMH # tXcKAIxs/MEntPrWTKTdtdnzotJVKw== # =AtfN # -----END PGP SIGNATURE----- # gpg: Signature made Thu 02 Feb 2023 15:59:52 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * tag 'pull-jan-omnibus-020223-1' of https://gitlab.com/stsquad/qemu: (36 commits) gitlab: cut even more from cross-win64-system build plugins: Iterate on cb_lists in qemu_plugin_user_exit cpu-exec: assert that plugin_mem_cbs is NULL after execution tcg: exclude non-memory effecting helpers from instrumentation translator: always pair plugin_gen_insn_{start, end} calls plugins: fix optimization in plugin_gen_disable_mem_helpers plugins: make qemu_plugin_user_exit's locking order consistent with fork_start's util/qht: use striped locks under TSAN thread: de-const qemu_spin_destroy util/qht: add missing atomic_set(hashes[i]) cpu: free cpu->tb_jmp_cache with RCU tests/tcg: add memory-sve test for aarch64 semihosting: add O_BINARY flag in host_open for NT compatibility semihosting: Write back semihosting data before completion callback docs: add an introduction to the system docs semihosting: add semihosting section to the docs docs: add a new section to outline emulation support docs: add hotlinks to about preface text MAINTAINERS: Fix the entry for tests/tcg/nios2 gitlab: wrap up test results for custom runners ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-02build-sys: fix crlf-ending C codeMarc-André Lureau
On msys2, the shader-to-C script produces bad C: ./ui/shader/texture-blit-vert.h:2:5: error: missing terminating " character [-Werror] Fix it by changing the line ending from crlf to lf, and convert the script to Python (qemu build seems perl-free after that). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20230110132700.833690-2-marcandre.lureau@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230124180127.1881110-6-alex.bennee@linaro.org>
2023-01-26qemu/bswap: Use compiler __builtin_bswap() on NetBSDPhilippe Mathieu-Daudé
Since commit efc6c070aca ("configure: Add a test for the minimum compiler version") the minimum compiler version required for GCC is 4.8, which supports __builtin_bswap(). Remove the NetBSD specific ifdef'ry. This reverts commit 1360677cfe3ca8f945fa1de77823df21a77e4500 ("makes NetBSD use the native bswap functions"). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230111163147.71761-7-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-01-26qemu/bswap: Remove <byteswap.h> dependencyPhilippe Mathieu-Daudé
Since commit efc6c070aca ("configure: Add a test for the minimum compiler version") the minimum compiler version required for GCC is 4.8, which supports __builtin_bswap(). Drop the <byteswap.h> dependency. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230111163147.71761-4-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-01-19ui/spice: Require spice-server >= 0.14.0Markus Armbruster
Version 0.14.0 is now old enough to have made it into the major distributions: Debian 11: 0.14.3 RHEL-8: 0.14.3 FreeBSD (ports): 0.15.0 Fedora 35: 0.15.0 Ubuntu 20.04: 0.14.2 OpenSUSE Leap 15.3: 0.14.3 Requiring it lets us drop a number of version checks. The next commit will clean up some more. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20230109190321.1056914-6-armbru@redhat.com>
2023-01-19ui/spice: Require spice-protocol >= 0.14.0Markus Armbruster
Version 0.14.0 is now old enough to have made it into the major distributions: Debian 11: 0.14.3 RHEL-8: 0.14.2 FreeBSD (ports): 0.14.4 Fedora 35: 0.14.0 Ubuntu 20.04: 0.14.0 OpenSUSE Leap 15.3: 0.14.3 Requiring it lets us drop two version checks in ui/vdagent.c. It also enables the next commit. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20230109190321.1056914-4-armbru@redhat.com>
2023-01-16util/bufferiszero: Use __attribute__((target)) for avx2/avx512Richard Henderson
Use the attribute, which is supported by clang, instead of the #pragma, which is not supported and, for some reason, also not detected by the meson probe, so we fail by -Werror. Include only <immintrin.h> as that is the outermost "official" header for these intrinsics -- emmintrin.h and smmintrin -- are older SSE2 and SSE4 specific headers, while the immintrin.h includes all of the Intel intrinsics. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-16accel/tcg: Add debuginfo supportIlya Leoshkevich
Add libdw-based functions for loading and querying debuginfo. Load debuginfo from the system and the linux-user loaders. This is useful for the upcoming perf support, which can then put human-readable guest symbols instead of raw guest PCs into perfmap and jitdump files. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Message-Id: <20230112152013.125680-3-iii@linux.ibm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-13mips: Always include nanomips disassemblerPaolo Bonzini
Since the nanomips disassembler is not C++ code anymore, it need not depend on link_language == cpp. Always include it and remove the CONFIG_NANOMIPS_DIS symbol. Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20230110084942.299460-1-pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-01-08Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into stagingPeter Maydell
* Atomic memslot updates for KVM (Emanuele, David) * Always send errors to logfile when daemonized (Greg) * Add support for IDE CompactFlash card (Lubomir) * First round of build system cleanups (myself) * First round of feature removals (myself) * Reduce "qemu/accel.h" inclusion (Philippe) # gpg: Signature made Thu 05 Jan 2023 23:51:09 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (24 commits) i386: SGX: remove deprecated member of SGXInfo target/i386: Add SGX aex-notify and EDECCSSA support util: remove support -chardev tty and -chardev parport util: remove support for hex numbers with a scaling suffix KVM: remove support for kernel-irqchip=off docs: do not talk about past removal as happening in the future meson: accept relative symlinks in "meson introspect --installed" data meson: cleanup compiler detection meson: support meson 0.64 -Doptimization=plain configure: test all warnings tests/qapi-schema: remove Meson workaround meson: cleanup dummy-cpus.c rules meson: tweak hardening options for Windows configure: remove backwards-compatibility and obsolete options configure: preserve qemu-ga variables configure: cleanup $cpu tests configure: remove dead function configure: remove useless write_c_skeleton ide: Add "ide-cf" driver, a CompactFlash card ide: Add 8-bit data mode ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-06Merge tag 'pull-tcg-20230105' of https://gitlab.com/rth7680/qemu into stagingPeter Maydell
Fix race conditions in new user-only vma tracking. Add tcg backend paired register allocation. Cleanup tcg backend function call abi. # gpg: Signature made Fri 06 Jan 2023 03:12:17 GMT # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * tag 'pull-tcg-20230105' of https://gitlab.com/rth7680/qemu: (47 commits) tests/tcg/multiarch: add vma-pthread.c accel/tcg: Handle false negative lookup in page_check_range accel/tcg: Use g_free_rcu for user-exec interval trees accel/tcg: Fix tb_invalidate_phys_page_unwind tcg: Add TCGHelperInfo argument to tcg_out_call tcg/aarch64: Merge tcg_out_callr into tcg_out_call tcg: Move ffi_cif pointer into TCGHelperInfo tcg: Factor init_ffi_layouts() out of tcg_context_init() tcg: Convert typecode_to_ffi from array to function tcg: Reorg function calls tcg: Use output_pref wrapper function tcg: Vary the allocation size for TCGOp tcg: Pass number of arguments to tcg_emit_op() / tcg_op_insert_*() accel/tcg/plugin: Use copy_op in append_{udata,mem}_cb accel/tcg/plugin: Avoid duplicate copy in copy_call accel/tcg/plugin: Don't search for the function pointer index tcg: Use TCG_CALL_ARG_EVEN for TCI special case tcg: Replace TCG_TARGET_EXTEND_ARGS with TCG_TARGET_CALL_ARG_I32 tcg: Replace TCG_TARGET_CALL_ALIGN_ARGS with TCG_TARGET_CALL_ARG_I64 tcg: Introduce TCGCallReturnKind and TCGCallArgumentKind ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-06meson: cleanup compiler detectionPaolo Bonzini
Detect all compilers at the beginning of meson.build, and store the available languages in an array. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-01-06meson: support meson 0.64 -Doptimization=plainPaolo Bonzini
In Meson 0.64, the optimization built-in option now accepts the "plain" value, which will not set any optimization flags. While QEMU does not check the contents of the option and therefore does not suffer any ill effect from the new value, it uses get_option to print the optimization flags in the summary. Clean the code up to remove duplication, and check for -Doptimization=plain at the same time. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-01-06meson: tweak hardening options for WindowsPaolo Bonzini
meson.build has been enabling ASLR _only_ for debug builds since commit d2147e04f95f ("configure: move Windows flags detection to meson", 2022-05-07); instead it was supposed to disable it for debug builds. However, the flag has been enabled for DLLs upstream for roughly 2 years (https://sourceware.org/bugzilla/show_bug.cgi?id=19011), and also by some distros including Debian for 6 years even (https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=836365). Enable it unconditionally; we can fix the reversed logic of commit d2147e04f95f later if there are any reports, but for now just enable the hardening. Also add -Wl,--high-entropy-va, which also controls ASLR. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-01-04meson: Move CONFIG_TCG_INTERPRETER to config_hostRichard Henderson
Like CONFIG_TCG, the enabled method of execution is a host property not a guest property. This exposes the define to compile-once files. Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-12-28hostmem: Honor multiple preferred nodes if possibleMichal Privoznik
If a memory-backend is configured with mode HOST_MEM_POLICY_PREFERRED then host_memory_backend_memory_complete() calls mbind() as: mbind(..., MPOL_PREFERRED, nodemask, ...); Here, 'nodemask' is a bitmap of host NUMA nodes and corresponds to the .host-nodes attribute. Therefore, there can be multiple nodes specified. However, the documentation to MPOL_PREFERRED says: MPOL_PREFERRED This mode sets the preferred node for allocation. ... If nodemask specifies more than one node ID, the first node in the mask will be selected as the preferred node. Therefore, only the first node is honored and the rest is silently ignored. Well, with recent changes to the kernel and numactl we can do better. The Linux kernel added in v5.15 via commit cfcaa66f8032 ("mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY") support for MPOL_PREFERRED_MANY, which accepts multiple preferred NUMA nodes instead. Then, numa_has_preferred_many() API was introduced to numactl (v2.0.15~26) allowing applications to query kernel support. Wiring this all together, we can pass MPOL_PREFERRED_MANY to the mbind() call instead and stop ignoring multiple nodes, silently. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Message-Id: <a0b4adce1af5bd2344c2218eb4a04b3ff7bcfdb4.1671097918.git.mprivozn@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2022-12-20qga: Add initial OpenBSD and NetBSD supportBrad Smith
qga: Add initial OpenBSD and NetBSD support Signed-off-by: Brad Smith <brad@comstyle.com> Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-29 18:42:00 +0000