aboutsummaryrefslogtreecommitdiff
path: root/include/hw/sd
AgeCommit message (Collapse)Author
2017-02-28hw/sd: add card-reparenting functionClement Deschamps
Provide a new function sdbus_reparent_card() in sd core for reparenting a card from a SDBus to another one. This function is required by the raspi platform, where the two SD controllers can be dynamically switched. Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1488293711-14195-3-git-send-email-peter.maydell@linaro.org Message-id: 20170224164021.9066-3-clement.deschamps@antfield.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: added a doc comment to the header file; changed to use new behaviour of qdev_set_parent_bus()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-28bcm2835_sdhost: add bcm2835 sdhost controllerClement Deschamps
This adds the BCM2835 SDHost controller from Arasan. Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr> Message-id: 20170224164021.9066-2-clement.deschamps@antfield.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-12Clean up ill-advised or unusual header guardsMarkus Armbruster
Cleaned up with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-05-19qemu-common: push cpu.h inclusion out of qemu-common.hPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-26sdhci: add quirk property for card insert interrupt status on Raspberry PiAndrew Baumann
This quirk is a workaround for the following hardware behaviour, on which UEFI (specifically, the bootloader for Windows on Pi2) depends: 1. at boot with an SD card present, the interrupt status/enable registers are initially zero 2. upon enabling it in the interrupt enable register, the card insert bit in the interrupt status register is immediately set 3. after a subsequent controller reset, the card insert interrupt does not fire, even if enabled in the interrupt enable register Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1456436130-7048-3-git-send-email-Andrew.Baumann@microsoft.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-26sdhci: Revert "add optional quirk property to disable card insertion/removal ↵Andrew Baumann
interrupts" This reverts commit 723697551a7e926abe7d3c7f2966012b8075143d. This change was poorly tested on my part. It squelched card insertion interrupts on reset, but that was not necessary because sdhci_reset() clears all the registers (via the call to memset), so the subsequent sdhci_insert_eject_cb() call never sees the card insert interrupt enabled. However, not calling the insert_eject_cb results in prnsts remaining 0, when it actually needs to be updated to indicate card presence and R/O status. Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1456436130-7048-2-git-send-email-Andrew.Baumann@microsoft.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-18hw/sd/sdhci.c: Update to use SDBus APIsPeter Maydell
Update the SDHCI code to use the new SDBus APIs. This commit introduces the new command line options required to connect a disk to sdhci-pci: -device sdhci-pci -drive id=mydrive,[...] -device sd,drive=mydrive Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1455646193-13238-6-git-send-email-peter.maydell@linaro.org
2016-02-18hw/sd: Add QOM bus which SD cards plug in toPeter Maydell
Add a QOM bus for SD cards to plug in to. Note that since sd_enable() is used only by one board and there only as part of a broken implementation, we do not provide it in the SDBus API (but instead add a warning comment about the old function). Whoever converts OMAP and the nseries boards to QOM will need to either implement the card switch properly or move the enable hack into the OMAP MMC controller model. In the SDBus API, the old-style use of sd_set_cb to register some qemu_irqs for notification of card insertion and write-protect toggling is replaced with methods in the SDBusClass which the card calls on status changes and methods in the SDClass which the controller can call to find out the current status. The query methods will allow us to remove the abuse of the 'register irqs' API by controllers in their reset methods to trigger the card to tell them about the current status again. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1455646193-13238-5-git-send-email-peter.maydell@linaro.org
2016-02-18hw/sd/sd.c: QOMifyPeter Maydell
Turn the SD card into a QOM device. This conversion only changes the device itself; the various functions which are effectively methods on the device are not touched at this point. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1455646193-13238-3-git-send-email-peter.maydell@linaro.org
2015-12-22sdhci: add optional quirk property to disable card insertion/removal interruptsAndrew Baumann
This is needed for a quirk of the Raspberry Pi (bcm2835/6) MMC controller, where the card insert bit is documented as unimplemented (always reads zero, doesn't generate interrupts) but is in fact observed on hardware as set at power on, but is cleared (and remains clear) on subsequent controller resets. Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 1450738069-18664-4-git-send-email-Andrew.Baumann@microsoft.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-07sdhci: Sanitize "sdhci-pci" properties for future qomificationMarkus Armbruster
We currently fuse controller and card into a single device model, but we intend qomify things properly and separate the two. The properties that really belong to the card would then have to somehow pass-through to the card's properties. To avoid that complication, either mark them experimental or drop them. Properties "capareg", "maxcurr" and the usual PCI device properties belong to the controller. Property "drive" belongs to the card; rename it to "x-drive". Properties "logical_block_size", "physical_block_size", "min_io_size", "opt_io_size", "discard_granularity" belong to the card, but have no effect; drop them. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1449503710-3707-2-git-send-email-armbru@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-29sdhci: Split sdhci.h for public and internal device usageSai Pavan Boddu
Split sdhci.h into pubilc version (i.e include/hw/sd/sdhci.h) and internal version (i.e hw/sd/sdhci-interna.h) based on register declarations and object declaration. Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-29sd.h: Move sd.h to include/hw/sd/Sai Pavan Boddu
Create a sd directory under include/hw/ and move sd.h to include/hw/sd/ Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-11 15:14:28 +0000