aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2019-03-19xen-mapcache: use MAP_FIXED flag so the mmap address hint is always honoredRoger Pau Monne
Or if it's not possible to honor the hinted address an error is returned instead. This makes it easier to spot the actual failure, instead of failing later on when the caller of xen_remap_bucket realizes the mapping has not been created at the requested address. Also note that at least on FreeBSD using MAP_FIXED will cause mmap to try harder to honor the passed address. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Igor Druzhinin <igor.druzhinin@cirtix.com> Message-Id: <20190318173731.14494-1-roger.pau@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-03-19riscv: sifive_u: Correct UART0's IRQ in the device treeBin Meng
The UART0's interrupt vector is wrongly set to 1 in the device tree. Use SIFIVE_U_UART0_IRQ instead. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19riscv: sifive_uart: Generate TX interruptBin Meng
At present the sifive uart model only generates RX interrupt. This updates it to generate TX interrupt so that it is more useful. Note the TX fifo is still unimplemented. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19riscv: sifive_u: Allow up to 4 CPUs to be createdAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19RISC-V: Allow interrupt controllers to claim interruptsMichael Clark
We can't allow the supervisor to control SEIP as this would allow the supervisor to clear a pending external interrupt which will result in lost a interrupt in the case a PLIC is attached. The SEIP bit must be hardware controlled when a PLIC is attached. This logic was previously hard-coded so SEIP was always masked even if no PLIC was attached. This patch adds riscv_cpu_claim_interrupts so that the PLIC can register control of SEIP. In the case of models without a PLIC (spike), the SEIP bit remains software controlled. This interface allows for hardware control of supervisor timer and software interrupts by other interrupt controller models. Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19RISC-V: Replace __builtin_popcount with ctpop8 in PLICMichael Clark
The mode variable only uses the lower 4-bits (M,H,S,U) so replace the GCC specific __builtin_popcount with ctpop8. Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19spapr: Remove NULL checks on error_propagate() callsMarkus Armbruster
Patch created mechanically by rerunning: $ spatch --sp-file scripts/coccinelle/error_propagate_null.cocci \ --macro-file scripts/cocci-macro-file.h \ --dir . --in-place Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190318190148.18283-1-armbru@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-19ppc/xics/spapr: Fix H_IPOLL implementationBenjamin Herrenschmidt
H_IPOLL takes the CPU# of the processor to poll as an argument, it doesn't operate on self. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190314063855.27890-1-clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-19ppc/pnv: Fix variable size in pnv_psi_power9_irq_set()Greg Kurz
PSI registers are 64-bit. Spotted by Coverity: CID 1399704 Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155248884690.893204.5428179144527749023.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-19ppc/pnv: Use local_err variable in pnv_chip_power9_intc_create()Greg Kurz
Detected by Coverity: CID 1399702 Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155248884129.893204.2293309859485638162.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-19spapr: Correctly set LPCR[GTSE] in H_REGISTER_PROCESS_TABLEDavid Gibson
176dccee "target/ppc/spapr: Clear partition table entry when allocating hash table" reworked the H_REGISTER_PROCESS_TABLE hypercall, but unfortunately due to a small error no longer correctly sets the LPCR[GTSE] bit which allows the guest to directly execute (some types of) tlbie (TLB flush) instructions without involving the hypervisor. We got away with this, initially, because POWER9 did not have hypervisor mode enabled in its msr_mask, which meant we didn't actually run hypervisor privilege checks in TCG at all. However, da874d90 "target/ppc: add HV support for POWER9" turned on HV support on POWER9 for the benefit of the powernv machine type. This exposed the earlier bug in H_REGISTER_PROCESS_TABLE, and causes guests which rely on LPCR[GTSE] (i.e. basically all of them) to crash during early boot when their first tlbie instruction causes an unexpected trap. Fixes: 176dccee target/ppc/spapr: Clear partition table entry when allocating hash table Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Tested-by: Cleber Rosa <crosa@redhat.com>
2019-03-18virtio-gpu: clear command and fence queues on resetGerd Hoffmann
It was never correct to not clear them. Due to commit "3912e66a3feb virtio-vga: fix reset." this became more obvious though. The virtio rings get properly reset now, and trying to process the stale commands will trigger an assert in the virtio core. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20190314115358.26678-3-kraxel@redhat.com
2019-03-18virtio-gpu: delay virglrenderer reset when blocked.Gerd Hoffmann
If renderer_blocked is set do not call virtio_gpu_virgl_reset(). Instead set a flag indicating that virglrenderer needs a reset. When renderer_blocked gets cleared do the actual reset call. Without this we can trigger an assert in spice due to calling spice_qxl_gl_scanout() while another operation is still running: spice_qxl_gl_scanout: condition `qxl_state->gl_draw_cookie == GL_DRAW_COOKIE_INVALID' failed Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20190314115358.26678-2-kraxel@redhat.com
2019-03-18ati-vga: fix tracingGerd Hoffmann
HWADDR_PRIx can't be used in tracing, use PRIx64 instead. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190312081143.24850-1-kraxel@redhat.com
2019-03-17Merge remote-tracking branch 'remotes/rth/tags/pull-hppa-20190316' into stagingPeter Maydell
Fix lost interrupts. Update seabios-hppa. # gpg: Signature made Sat 16 Mar 2019 16:13:42 GMT # gpg: using RSA key 64DF38E8AF7E215F # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-hppa-20190316: Update seabios-hppa to latest upstream target/hppa: Avoid squishing DISAS_IAQ_N_STALE_EXIT Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-16hw/rdma: Fix the error prints in create_qp_rings()Kamal Heib
The prints should indicate that we are talking about QP and not CQ. Fixes: 98d176f8e592 ("hw/rdma: PVRDMA commands and data-path ops") Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Message-Id: <20190227085546.23690-1-kamalheib1@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2019-03-16hw/pvrdma: Fix zero-initialization of resp in {query/modify}_qpKamal Heib
Make sure to zero-initialize only the pvrdma_cmd_query_qp_resp and not the whole pvrdma_cmd_resp for query_qp, in modify_qp the resp isn't used so remove it. Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Message-Id: <20190314153031.7197-5-kamalheib1@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2019-03-16hw/rdma: Use {} instead of {0}Kamal Heib
Initialize structs with {} instead of {0} to make sure that all code is using the same convention. Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Message-Id: <20190314153031.7197-4-kamalheib1@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2019-03-16hw/rdma: Remove unused parameter from rdma_poll_cq()Kamal Heib
The 'rdma_dev_res' parameter is not used in rdma_poll_cq(), so remove it. Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Message-Id: <20190314153031.7197-3-kamalheib1@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2019-03-16hw/rdma: Fix broken paths to docs/devel/tracing.txtKamal Heib
The tracing.txt file is under "docs/devel" and not "docs". Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Message-Id: <20190314153031.7197-2-kamalheib1@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2019-03-16hw/rdma: another clang compilation fixMarcel Apfelbaum
Configuring QEMU with: configure --target-list="x86_64-softmmu" --cc=clang --enable-pvrdma Results in: qemu/hw/rdma/rdma_rm_defs.h:108:3: error: redefinition of typedef 'RdmaDeviceResources' is a C11 feature [-Werror,-Wtypedef-redefinition] } RdmaDeviceResources; ^ qemu/hw/rdma/rdma_backend_defs.h:24:36: note: previous definition is here typedef struct RdmaDeviceResources RdmaDeviceResources; Fix by removing one of the 'typedef' definitions. Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <20190214154053.15050-1-marcel.apfelbaum@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2019-03-16hw/pvrdma: Provide correct value to object_get_typenameYuval Shaia
Use base object of PCIDevice in call to object_get_typename(). Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Message-Id: <1552300155-25216-12-git-send-email-yuval.shaia@oracle.com> Reviewed-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2019-03-16hw/pvrdma: Unregister from shutdown notifier when device goes downYuval Shaia
This hook was installed to close the device when VM is going down. After the device is closed there is no need to be informed on VM shutdown. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <1552300155-25216-11-git-send-email-yuval.shaia@oracle.com> Reviewed-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2019-03-16hw/pvrdma: Delete pvrdma_exit functionYuval Shaia
This hook is not called and was implemented by mistake. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <1552300155-25216-10-git-send-email-yuval.shaia@oracle.com> Reviewed-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2019-03-16hw/pvrdma: Delete unneeded function argumentYuval Shaia
The function's argument rdma_dev_res is not needed as it is stored in the backend_dev object at init. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <1552300155-25216-9-git-send-email-yuval.shaia@oracle.com> Reviewed-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2019-03-16hw/rdma: Free all receive buffers when QP is destroyedYuval Shaia
When QP is destroyed the backend QP is destroyed as well. This ensures we clean all received buffer we posted to it. However, a contexts of these buffers are still remain in the device. Fix it by maintaining a list of buffer's context and free them when QP is destroyed. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <1552300155-25216-8-git-send-email-yuval.shaia@oracle.com> Reviewed-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2019-03-16hw/rdma: Free all MAD receive buffers when device is closedYuval Shaia
When device is going down free all saved MAD buffers. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <1552300155-25216-7-git-send-email-yuval.shaia@oracle.com> Reviewed-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2019-03-16{hmp, hw/pvrdma}: Expose device internals via monitor interfaceYuval Shaia
Allow interrogating device internals through HMP interface. The exposed indicators can be used for troubleshooting by developers or sysadmin. There is no need to expose these attributes to a management system (e.x. libvirt) because (1) most of them are not "device-management' related info and (2) there is no guarantee the interface is stable. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1552300155-25216-6-git-send-email-yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2019-03-16hw/pvrdma: Collect debugging statisticsYuval Shaia
Add counters to enable enhance debugging Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Message-Id: <1552300155-25216-5-git-send-email-yuval.shaia@oracle.com> Reviewed-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2019-03-16hw/rdma: Protect against concurrent execution of poll_cqYuval Shaia
The function rdma_poll_cq is called from two contexts - completion handler thread which sense new completion on backend channel and explicitly as result of guest issuing poll_cq command. Add lock to protect against concurrent executions. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <1552300155-25216-4-git-send-email-yuval.shaia@oracle.com> Reviewed-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2019-03-16hw/rdma: Introduce protected qlistYuval Shaia
To make code more readable move handling of protected list to a rdma_utils Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <1552300155-25216-3-git-send-email-yuval.shaia@oracle.com> Reviewed-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2019-03-16hw/rdma: Switch to generic error reporting wayYuval Shaia
Utilize error_report for all pr_err calls and some pr_dbg that are considered as errors. For the remaining pr_dbg calls, the important ones were replaced by trace points while other deleted. Some of the functions got renamed to include prefix "rdma/pvrdma" in the function name. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <1552300155-25216-2-git-send-email-yuval.shaia@oracle.com> Reviewed-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2019-03-15Update seabios-hppa to latest upstreamHelge Deller
This patch fixes two issues in the hppa/parisc emulation: 1. The CPU HPA was wrong in the sense that we had negative module offsets in the firmware-internal module table (which we ignored up to now). Get it correct by changing the CPU HPA to 0xfffb0000 which is greater than the DINO_HPA of 0xfff80000. This change requires the seabios-firmware update. 2. Sven noticed that the FPU register cr10 is only able to reference up to 8 FPUs, so let's reduce the maximum amount of SMP CPUs too. Signed-off-by: Helge Deller <deller@gmx.de> Message-Id: <20190315164130.GA7800@ls3530> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-15hw/arm/virt-acpi-build: use PCIE_MMCFG_BUS to retrieve end_bus_numberWei Yang
This is more proper to use PCIE_MMCFG_BUS to retrieve end_bus_number. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20190312074953.16671-1-richardw.yang@linux.intel.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-15hw/arm/virt-acpi-build: Fix SMMUv3 GSIV valuesEric Auger
The GSIV numbers of the SPI based interrupts is not correct as ARM_SPI_BASE was not added to the irqmap[VIRT_SMMU] value. So this may collide with VIRTIO_MMIO irq window. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20190312091031.5185-1-eric.auger@redhat.com Reviewed-by: Shannon Zhao <shannon.zhaosl@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-15hw/intc/bcm2836_control: Implement local timerZoltán Baldaszti
The BCM2836 control logic module includes a simple "local timer" which is a programmable down-counter that can generates an interrupt. Implement this functionality. Signed-off-by: Zoltán Baldaszti <bztemail@gmail.com> [PMM: wrote commit message; wrapped long line; tweaked some comments to match the final version of the code] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-13Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pci, pc, virtio: features, fixes, cleanups intel-iommu scalable option pcie acs emulation beginning for vhost-user-blk reconnect and of vhost-user backend work misc fixes and cleanups Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 13 Mar 2019 02:52:02 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (26 commits) i386, acpi: check acpi_memory_hotplug capacity in pre_plug gen_pcie_root_port: Add ACS (Access Control Services) capability pcie: Add a simple PCIe ACS (Access Control Services) helper function vhost-user-blk: Add support to get/set inflight buffer libvhost-user: Support tracking inflight I/O in shared memory libvhost-user: Introduce vu_queue_map_desc() libvhost-user: Remove unnecessary FD flag check for event file descriptors vhost-user: Support transferring inflight buffer between qemu and backend nvdimm: use NVDIMM_ACPI_IO_LEN for the proper IO size nvdimm: use *function* directly instead of allocating it again nvdimm: fix typo in nvdimm_build_nvdimm_devices argument intel_iommu: add scalable-mode option to make scalable mode work intel_iommu: add 256 bits qi_desc support intel_iommu: scalable mode emulation libvhost-user: add vu_queue_unpop() libvhost-user-glib: export vug_source_new() vhost-user: split vhost_user_read() vhost-user: wrap some read/write with retry handling libvhost-user: exit by default on VHOST_USER_NONE vhost-user: simplify vhost_user_init/vhost_user_cleanup ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-13Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches: - file-posix: Make auto-read-only dynamic - Add x-blockdev-reopen QMP command - Finalize block-latency-histogram QMP command - gluster: Build fixes for newer lib version # gpg: Signature made Tue 12 Mar 2019 19:30:31 GMT # gpg: using RSA key 7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (28 commits) qemu-iotests: Test the x-blockdev-reopen QMP command block: Add an 'x-blockdev-reopen' QMP command block: Remove the AioContext parameter from bdrv_reopen_multiple() block: Add bdrv_reset_options_allowed() block: Add a 'mutable_opts' field to BlockDriver block: Allow changing the backing file on reopen block: Allow omitting the 'backing' option in certain cases block: Handle child references in bdrv_reopen_queue() block: Add 'keep_old_opts' parameter to bdrv_reopen_queue() block: Freeze the backing chain for the duration of the stream job block: Freeze the backing chain for the duration of the mirror job block: Freeze the backing chain for the duration of the commit job block: Allow freezing BdrvChild links nvme: fix write zeroes offset and count file-posix: Make auto-read-only dynamic file-posix: Prepare permission code for fd switching file-posix: Lock new fd in raw_reopen_prepare() file-posix: Store BDRVRawState.reopen_state during reopen file-posix: Factor out raw_reconfigure_getfd() file-posix: Fix bdrv_open_flags() for snapshot=on ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-12i386, acpi: check acpi_memory_hotplug capacity in pre_plugWei Yang
Currently we do device realization like below: hotplug_handler_pre_plug() dc->realize() hotplug_handler_plug() Before we do device realization and plug, we should allocate necessary resources and check if memory-hotplug-support property is enabled. At the piix4 and ich9, the memory-hotplug-support property is checked at plug stage. This means that device has been realized and mapped into guest address space 'pc_dimm_plug()' by the time acpi plug handler is called, where it might fail and crash QEMU due to reaching g_assert_not_reached() (piix4) or error_abort (ich9). Fix it by checking if memory hotplug is enabled at pre_plug stage where we can gracefully abort hotplug request. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> CC: Igor Mammedov <imammedo@redhat.com> CC: Eric Blake <eblake@redhat.com> Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Message-Id: <20190301033548.6691-1-richardw.yang@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12gen_pcie_root_port: Add ACS (Access Control Services) capabilityKnut Omang
Claim ACS support in the generic PCIe root port to allow passthrough of individual functions of a device to different guests (in a nested virt.setting) with VFIO. Without this patch, all functions of a device, such as all VFs of an SR/IOV device, will end up in the same IOMMU group. A similar situation occurs on Windows with Hyper-V. In the single function device case, it also has a small cosmetic benefit in that the root port itself is not grouped with the device. VFIO handles that situation in that binding rules only apply to endpoints, so it does not limit passthrough in those cases. Signed-off-by: Knut Omang <knut.omang@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <319460b483f566dd57487eb3dd340ed4c10aa53c.1550768238.git-series.knut.omang@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2019-03-12pcie: Add a simple PCIe ACS (Access Control Services) helper functionKnut Omang
Implementing an ACS capability on downstream ports and multifunction endpoints indicates isolation and IOMMU visibility to a finer granularity. This creates smaller IOMMU groups in the guest and thus more flexibility in assigning endpoints to guest userspace or an L2 guest. Signed-off-by: Knut Omang <knut.omang@oracle.com> Message-Id: <07489975121696f5573b0a92baaf3486ef51e35d.1550768238.git-series.knut.omang@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2019-03-12vhost-user-blk: Add support to get/set inflight bufferXie Yongji
This patch adds support for vhost-user-blk device to get/set inflight buffer from/to backend. Signed-off-by: Xie Yongji <xieyongji@baidu.com> Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Message-Id: <20190228085355.9614-6-xieyongji@baidu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12vhost-user: Support transferring inflight buffer between qemu and backendXie Yongji
This patch introduces two new messages VHOST_USER_GET_INFLIGHT_FD and VHOST_USER_SET_INFLIGHT_FD to support transferring a shared buffer between qemu and backend. Firstly, qemu uses VHOST_USER_GET_INFLIGHT_FD to get the shared buffer from backend. Then qemu should send it back through VHOST_USER_SET_INFLIGHT_FD each time we start vhost-user. This shared buffer is used to track inflight I/O by backend. Qemu should retrieve a new one when vm reset. Signed-off-by: Xie Yongji <xieyongji@baidu.com> Signed-off-by: Chai Wen <chaiwen@baidu.com> Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Message-Id: <20190228085355.9614-2-xieyongji@baidu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12nvdimm: use NVDIMM_ACPI_IO_LEN for the proper IO sizeWei Yang
The IO range is defined to 4 bytes with NVDIMM_ACPI_IO_LEN, so it is more proper to use this macro instead of calculating it by sizeof. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Message-Id: <20190227075101.6263-4-richardw.yang@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2019-03-12nvdimm: use *function* directly instead of allocating it againWei Yang
At the beginning or nvdimm_build_common_dsm(), variable *function* is already allocated for Arg2. This patch reuse variable *function* instead of allocating it again. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Message-Id: <20190227075101.6263-3-richardw.yang@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2019-03-12nvdimm: fix typo in nvdimm_build_nvdimm_devices argumentWei Yang
>From dsm_dma_arrea to dsm_dma_area. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Message-Id: <20190227075101.6263-2-richardw.yang@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2019-03-12intel_iommu: add scalable-mode option to make scalable mode workYi Sun
This patch adds an option to provide flexibility for user to expose Scalable Mode to guest. User could expose Scalable Mode to guest by the config as below: "-device intel-iommu,caching-mode=on,scalable-mode=on" The Linux iommu driver has supported scalable mode. Please refer below patch set: https://www.spinics.net/lists/kernel/msg2985279.html Signed-off-by: Liu, Yi L <yi.l.liu@intel.com> Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com> Message-Id: <1551753295-30167-4-git-send-email-yi.y.sun@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12intel_iommu: add 256 bits qi_desc supportLiu, Yi L
Per Intel(R) VT-d 3.0, the qi_desc is 256 bits in Scalable Mode. This patch adds emulation of 256bits qi_desc. Signed-off-by: Liu, Yi L <yi.l.liu@intel.com> [Yi Sun is co-developer to rebase and refine the patch.] Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <1551753295-30167-3-git-send-email-yi.y.sun@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12intel_iommu: scalable mode emulationLiu, Yi L
Intel(R) VT-d 3.0 spec introduces scalable mode address translation to replace extended context mode. This patch extends current emulator to support Scalable Mode which includes root table, context table and new pasid table format change. Now intel_iommu emulates both legacy mode and scalable mode (with legacy-equivalent capability set). The key points are below: 1. Extend root table operations to support both legacy mode and scalable mode. 2. Extend context table operations to support both legacy mode and scalable mode. 3. Add pasid tabled operations to support scalable mode. Signed-off-by: Liu, Yi L <yi.l.liu@intel.com> [Yi Sun is co-developer to contribute much to refine the whole commit.] Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com> Message-Id: <1551753295-30167-2-git-send-email-yi.y.sun@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2019-03-12vhost-user: split vhost_user_read()Marc-André Lureau
Split vhost_user_read(), so only header can be read with vhost_user_read_header(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20190308140454.32437-8-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-29 15:30:41 +0000