aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2010-08-30virtio-blk: Fix migration of queued requestsKevin Wolf
in_sg[].iovec and out_sg[].ioved are pointer to (source) host memory and therefore invalid after migration. When loading the device state we must create a new mapping on the destination host. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-30virtio: Factor virtqueue_map_sg outKevin Wolf
Separate the mapping of requests to host memory from the descriptor iteration. The next patch will make use of it in a different context. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-28isapc: fix segfault.Isaku Yamahata
https://bugs.launchpad.net/bugs/611646 reports that ./i386-softmmu/qemu -M isapc segfaults. This patch fixes the segfault introduced by f885f1eaa8711c06033ceb1599e3750fb37c306f It's because i440fx_state in pc_init1() isn't initialized. > Core was generated by `./i386-softmmu/qemu -M isapc'. > Program terminated with signal 11, Segmentation fault. > [New process 19686] > at qemu/hw/piix_pci.c:136 > (gdb) where > at qemu/hw/piix_pci.c:136 > boot_device=0x7fffe1f5b040 "cad", kernel_filename=0x0, > kernel_cmdline=0x6469bf "", initrd_filename=0x0, > cpu_model=0x654d10 "486", pci_enabled=0) > at qemu/hw/pc_piix.c:178 > boot_device=0x7fffe1f5b040 "cad", kernel_filename=0x0, > kernel_cmdline=0x6469bf "", initrd_filename=0x0, cpu_model=0x654d10 "486") > at qemu/hw/pc_piix.c:207 > envp=0x7fffe1f5b188) > at qemu/vl.c:2871 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-26etraxfs_eth: correct use of ! and &Blue Swirl
Combining bitwise AND and logical NOT is suspicious. Fixed by this Coccinelle script: // From http://article.gmane.org/gmane.linux.kernel/646367 @@ expression E1,E2; @@ ( !E1 & !E2 | - !E1 & E2 + !(E1 & E2) ) Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-26ppc4xx: load Bamboo kernel, initrd, and fdt at fixed addressesHollis Blanchard
We can't use the return value of load_uimage() for the kernel because it can't account for BSS size, and the PowerPC kernel does not relocate blobs before zeroing BSS. Instead, we now load at the fixed addresses chosen by u-boot (the normal firmware for the board). Signed-off-by: Hollis Blanchard <hollis@penguinppc.org>
2010-08-26ppc4xx: don't unregister RAM at resetHollis Blanchard
The PowerPC 4xx SDRAM controller emulation unregisters RAM in its reset callback. However, qemu_system_reset() is now called at initialization time, so all RAM is unregistered before starting the guest (!). Signed-off-by: Hollis Blanchard <hollis@penguinppc.org>
2010-08-26ppc4xx: correct SDRAM controller warning message conditionHollis Blanchard
The message "Truncating memory to %d MiB to fit SDRAM controller limits" should be displayed only when a user chooses an amount of RAM which can't be represented by the PPC 4xx SDRAM controller (e.g. 129MB, which would only be valid if the controller supports a bank size of 1MB). Signed-off-by: Hollis Blanchard <hollis@penguinppc.org>
2010-08-26PPC: Add PV hypercall transport through fw_cfgAlexander Graf
On KVM for PPC we need to tell the guest which instructions to use when doing a hypercall. The clean way to do this is to go through an ioctl from userspace and passing it on to the guest using the device tree. So let's do the qemu part here: read out the hypercall and pass it on to the guest's fw_cfg so openBIOS can read it out and expose it again. Signed-off-by: Alexander Graf <agraf@suse.de>
2010-08-24Rearrange block headersBlue Swirl
Changing block.h or blockdev.h resulted in recompiling most objects. Move DriveInfo typedef and BlockInterfaceType enum definitions to qemu-common.h and rearrange blockdev.h use to decrease churn. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-22QemuOpts: make most qemu_*_opts staticGerd Hoffmann
Switch tree to lookup-by-name using qemu_find_opts(). Also hook up virtfs options so qemu_find_opts works for them too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-22VGA: Don't register deprecated VBE rangeAlex Williamson
Old versions of the BOCHs VGA BIOS (cira 2003) made use of VBE registers at 0xff80/81. In VBE API version 0xb0c2 these were moved to 0x1ce/cf. Unfortunately, QEMU still registers handlers for the old range. If a guest attempts to assign an I/O device overlapping this region, QEMU exits with a hw_error. Windows guests seem to like to assign I/O devices to the high end of the address space, so it's pretty easy to hot add an rtl8139 to a Win2k8 guest and trigger the bug. I can't find any reason to register these handlers, so let's remove the cruft. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-22virtio-serial: Cleanup on device hot-unplugAmit Shah
Free malloc'ed memory, unregister from savevm and clean up virtio-common bits on device hot-unplug. This was found performing a migration after device hot-unplug. Reported-by: <lihuang@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-22pckbd: support for commands 0xf0-0xff: Pulse output bitBernhard Kohl
I have a guest OS which sends the command 0xfd to the keyboard controller during initialization. To get rid of the message "qemu: unsupported keyboard cmd=0x%02x\n" I added support for the pulse output bit commands. I found the following explanation here: http://www.win.tue.nl/~aeb/linux/kbd/scancodes-11.html#ss11.3 Command 0xf0-0xff: Pulse output bit Bits 3-0 of the output port P2 of the keyboard controller may be pulsed low for approximately 6 µseconds. Bits 3-0 of this command specify the output port bits to be pulsed. 0: Bit should be pulsed. 1: Bit should not be modified. The only useful version of this command is Command 0xfe. (For MCA, replace 3-0 by 1-0 in the above.) Command 0xfe: System reset Pulse bit 0 of the output port P2 of the keyboard controller. This will reset the CPU. Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-20Replace qemu_malloc + memset with qemu_malloczBlue Swirl
Replace a qemu_malloc call, followed by a memset, with qemu_mallocz. Found with this Coccinelle semantic patch, adapted from Coccinelle test package rule 94: @@ type T; expression x; expression E; @@ - x = (T)qemu_malloc(E) + x = qemu_mallocz(E) ... ( - memset(x,0,E); | - memset(x,0,sizeof(*x)); ) Some files (tests/*) had to be filtered out. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-19Remove useless NULL check for qemu_strdup return valueBlue Swirl
Found with this Coccinelle semantic patch: @@ expression E; identifier ptr; identifier fn ~= "qemu_strn?dup"; @@ -ptr = fn(E); -if (ptr == NULL) { ... } - +ptr = fn(E); Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-15sparc escc IUS improvements (SunOS 4.1.4 fix)Artyom Tarasenko
According to scc_escc_um.pdf: - Reset Highest IUS must update irq status to allow processing of the next priority interrupt. - rx interrupt has always higher priority than tx on same channel The documentation only explicitly says that Reset Highest IUS command (0x38) clears IUS bits, not that it clears the corresponding interrupt too, so don't clear interrupts on this command. The patch allows SunOS 4.1.4 to use the serial ports Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-10RESEND: Inter-VM shared memory PCI deviceCam Macdonell
resend for bug fix related to removal of irqfd Support an inter-vm shared memory device that maps a shared-memory object as a PCI device in the guest. This patch also supports interrupts between guest by communicating over a unix domain socket. This patch applies to the qemu-kvm repository. -device ivshmem,size=<size in format accepted by -m>[,shm=<shm name>] Interrupts are supported between multiple VMs by using a shared memory server by using a chardev socket. -device ivshmem,size=<size in format accepted by -m>[,shm=<shm name>] [,chardev=<id>][,msi=on][,ioeventfd=on][,vectors=n][,role=peer|master] -chardev socket,path=<path>,id=<id> The shared memory server, sample programs and init scripts are in a git repo here: www.gitorious.org/nahanni Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-10Support marking a device as non-migratableCam Macdonell
A non-migratable device should be removed before migration and re-added after. Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-09Merge remote branch 'kwolf/for-anthony' into stagingAnthony Liguori
2010-08-03sparc32: use FW_CFG_CMDLINE_SIZEBlue Swirl
Add support for getting kernel command line size with FW_CFG_CMDLINE_SIZE. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-03ide: Avoid canceling IDE DMAAndrea Arcangeli
The reason for not actually canceling the I/O is because with virtualization and lots of VM running, a guest fs may mistake a overload of the host, as an IDE timeout. So rather than canceling the I/O, it's safer to wait I/O completion and simulate that the I/O has completed just before the io cancellation was requested by the guest. This way if ntfs or an app writes data without checking for -EIO retval, and it thinks the write has succeeded, it's less likely to run into troubles. Similar issues for reads. Furthermore because the DMA operation is splitted into many synchronous aio_read/write if there's more than one entry in the SG table, without this patch the DMA would be cancelled in the middle, something we've no idea if it happens on real hardware too or not. Overall this seems a great risk for zero gain. This approach is sure safer than previous code given we can't pretend all guest fs code out there to check for errors and reply the DMA if it was completed partially, given a timeout would never materialize on a real harddisk unless there are defective blocks (and defective blocks are practically only an issue for reads never for writes in any recent hardware as writing to blocks is the way to fix them) or the harddisk breaks as a whole. Signed-off-by: Izik Eidus <ieidus@redhat.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-02fix last cpu timer initializationArtyom Tarasenko
The timer #0 is the system timer, so the timer #num_cpu is the timer of the last CPU, and it must be initialized in slavio_timer_reset. Don't mark non-existing timers as running. Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-31jazz led: Fix debug printsHervé Poussineau
Add a macro to easily enable/disable debug prints Also fix wrong printf formatters Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-31xilinx-s3adsp: Add support for loading u-boot images.Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-07-31xilinx-s3adsp: Fix loading of raw binaries.Edgar E. Iglesias
Set high to a word aligned address beyond loaded image. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-07-30Remove unused eventfd.hMike McCormack
This header is not present on my system and causes a build failure, but is also not used in these files, so remove it. Signed-off-by: Mike McCormack <mikem@ring3k.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30mips64el: fulong: PCI_DEVFN() clean up.Isaku Yamahata
Use PCI_DEVFN() where appropriate. The resulted stripped binary remains same with/without thie patch. Cc: Huacai Chen <zltjiangshi@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30remove dead code from hw/loader.cJoel Schopp
Removing dead code. Above we already continued when rom->addr + valuegreaterthan0 < addr so this condition is always false. Signed-off-by: Joel Schopp <jschopp@austin.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30virtio-serial: Check if more max_ports specified than we can handleAmit Shah
Currently virtio-serial supports a maximum of 31 ports. Specifying the 'max_ports' parameter to be > 31 on the cmd line causes badness. Ensure we initialise virtio-serial only if max_ports is within the supported range. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30Merge branch 'for-anthony' of git://repo.or.cz/qemu/kevinAurelien Jarno
* 'for-anthony' of git://repo.or.cz/qemu/kevin: Fix -snapshot deleting images on disk change block: Use error codes from lower levels for error message block: default to 0 minimal / optiomal I/O size move 'unsafe' to end of caching modes in help virtio-blk: Create exit function to unregister savevm block migration: propagate return value when bdrv_write() returns < 0 ide/atapi: add support for GET EVENT STATUS NOTIFICATION
2010-07-27Fix uint8_t comparisons with negative valuesBlue Swirl
Fix the following warnings: /src/qemu/hw/ide/core.c: In function `ide_drive_pio_post_load': /src/qemu/hw/ide/core.c:2767: warning: comparison is always false due to limited range of data type /src/qemu/ui/vnc-enc-tight.c: In function `tight_detect_smooth_image': /src/qemu/ui/vnc-enc-tight.c:284: warning: comparison is always true due to limited range of data type /src/qemu/ui/vnc-enc-tight.c:297: warning: comparison is always true due to limited range of data type /src/qemu/ui/vnc-enc-tight.c: In function `tight_encode_indexed_rect16': /src/qemu/ui/vnc-enc-tight.c:456: warning: comparison is always false due to limited range of data type /src/qemu/ui/vnc-enc-tight.c: In function `tight_encode_indexed_rect32': /src/qemu/ui/vnc-enc-tight.c:457: warning: comparison is always false due to limited range of data type Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-26ide: fix migration in the middle of a bmdma transferJuan Quintela
It reintroduces Revert "ide save/restore pio/atapi cmd transfer fields and io buffer" but using subsections. Added bonus is the addition of ide_dummy_transfer_stop to transfer_end_table, that was missing. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-26ide: fix migration in the middle of pio operationJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-26vmstate: add subsections codeJuan Quintela
This commit adds subsections for each device section. Subsections is the way to handle information that don't need to be sent to de destination of a migration because its values are not needed. It is the way to handle optional information. Notice that only the source can decide if the information is optional or not. The destination needs to understand all subsections that it receives to have a sucessful load. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-26Revert "ide save/restore current transfer fields"Juan Quintela
This reverts commit 42ee76fe82093ba914f0dc83d2decbcf68866144. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-26Revert "ide save/restore pio/atapi cmd transfer fields and io buffer"Juan Quintela
This reverts commit ed487bb1d69040b9dac64a4fc076d8dd82b131d6. The conflicts are due to commit 4fc8d6711aff7a9c11e402c3d77b481609f9f486 that is a fix to the ide_drive_pre_save() function. It reverts both (and both are reinstantiated later in the series) Conflicts: hw/ide/core.c Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-26Merge remote branch 'mst/for_anthony' into stagingAnthony Liguori
2010-07-26virtio-blk: Create exit function to unregister savevmAlex Williamson
Otherwise we can't migrate after we've removed a virtio block device. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-26ide/atapi: add support for GET EVENT STATUS NOTIFICATIONAurelien Jarno
The GET EVENT STATUS NOTIFICATION is a mandatory command according to MMC-3, even if event status notification is not supported. This patch adds support for this command. It returns NEA ("No Event Available") with an empty "Supported Event Classes" to show that it doesn't event support status notification. If asychronous operation is requested, which requires NCQ support, it returns an error according to the specifications. This fixes HAL support on FreeBSD and derivatives, which fill up the logs every second with: acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x20 ascq=0x00 Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-25etrax: Update ethernet mgm-ctrl reg on writesEdgar E. Iglesias
Some SW drivers dont keep track of what they've written and depend on the HW latching write contents for later read+modify+write sequences. Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
2010-07-25mips: more fixes to the MIPS interrupt glue logicAurelien Jarno
Commit 36388314febad3d7675ab919287f03733a560ff6 moved most of the interrupt logic to cpu-exec.c. Remove the remaining useless code and fix software interrupts. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Acked-by: Edgar E. Iglesias <edgar@axis.com> Tested-by: Edgar E. Iglesias <edgar@axis.com>
2010-07-24mips: Correct MIPS interrupt glue logic for icountEdgar E. Iglesias
When hw interrupt pending bits in CP0_Cause are set, the CPU should see the hw interrupt line as active. The CPU may or may not take the interrupt based on internal state (global irq mask etc) but the glue logic shouldn't care. This fixes MIPS external hw interrupts in combination with -icount. Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
2010-07-22scsi: Dequeue requests before invoking completion callbackJan Kiszka
The request completion callback of the LSI controller may start the next request that can use the same tag as the completed one. As the latter is still enqueued at that point, scsi_send_command will complain about the tag reuse and cancel the completed request. That will cause a double free later on when the completion path cleans up as well. Fix this by dequeuing the request before invoking the callback. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-22e1000: Fix wrong microwire EEPROM state initializationIzumi Tsutsui
This change fixes initialization of e1000's microwire EEPROM internal state values so that qemu's e1000 emulation works on NetBSD, which doesn't use Intel's em driver but has its own wm driver for the Intel i8254x Gigabit Ethernet. Previously set_eecd() function in e1000.c clears EEPROM internal state values on SK rising edge during CS==L, but according to FM93C06 EEPROM (which is MicroWire compatible) data sheet, EEPROM internal status should be cleared on CS rise edge regardless of SK input: "... a rising edge on this (CS) signal is required to reset the internal state-machine to accept a new cycle .." and nothing should be changed during CS (chip select) is inactive. Intel's em driver seems to explicitly raise SK output after CS is negated in em_standby_eeprom() so many other OSes that use Intel's driver don't have this problem even on the previous e1000.c implementation, but I can't find any articles that say the MICROWIRE or EEPROM spec requires such sequence, and actually hardware works fine without it (i.e. real i82540EM has been working on NetBSD). This fix also changes initialization to clear each state value in struct eecd_state individually rather than using memset() against the whole structre. The old_eecd member stores the last SK and CS signal levels and it should be preserved even after reset of internal EEPROM state to detect next signal edges for proper EEPROM emulation. Signed-off-by: Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-22virtio-serial: Fix compat property nameAmit Shah
Starting with qemu -M pc-0.12 -device virtio-serial results in -device virtio-serial: Property 'virtio-serial-pci.max_nr_ports' not found The property name 'max_ports' is incorrectly named 'max_nr_ports'. Fix that. Also fix the ppc440 machine type bamboo-0.12 which has this typo. Reported-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-20Sparc32: reserve addresses for unimplemented devices on SS-20Bob Breuer
Use empty_slot to reserve addresses for several unimplemented devices so they won't fault. - BPP (parallel port), DBRI (audio), SX (pixel processor), and vsimms (framebuffer) OBP for SS-20 either assumes these devices exist or probes without expecting faults. Signed-off-by: Bob Breuer <breuerr@mc.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-19vhost: fix miration during device startMichael S. Tsirkin
We need to know ring layout to allocate log buffer. So init rings first. Also fixes a theoretical memory-leak-on-error. https://bugzilla.redhat.com/show_bug.cgi?id=615228 Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com>
2010-07-19e1000: secrc supportMichael S. Tsirkin
Add support for secrc field. Reportedly needed by old RHEL guests. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-19e1000: fix access 4 bytes beyond buffer endMichael S. Tsirkin
We do range check for size, and get size as buffer, but copy size + 4 bytes (4 is for FCS). Let's copy size bytes but put size + 4 in length. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-15Merge remote branch 'origin/master' into stagingAnthony Liguori
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-15 23:47:41 +0000