aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2013-07-22Merge remote-tracking branch 'pmaydell/tags/pull-arm-devs-20130722' into stagingAnthony Liguori
arm-devs queue # gpg: Signature made Mon 22 Jul 2013 06:38:52 AM CDT using RSA key ID 14360CDE # gpg: Can't check signature: public key not found # By Peter Maydell (8) and Soren Brinkmann (2) # Via Peter Maydell * pmaydell/tags/pull-arm-devs-20130722: hw/arm: Use 'load_ramdisk()' for loading ramdisks w/ U-Boot header hw/loader: Support ramdisk with u-boot header vexpress: Add virtio-mmio transports vexpress: Make VEDBoardInfo extend arm_boot_info arm/boot: Allow boards to modify the FDT blob virtio: Implement MMIO based virtio transport virtio: Support transports which can specify the vring alignment virtio: Add support for guest setting of queue size arm/boot: Use qemu_devtree_setprop_sized_cells() device_tree: Add qemu_devtree_setprop_sized_cells() utility functions Message-id: 1374493427-3254-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-22Merge remote-tracking branch 'mjt/trivial-patches' into stagingAnthony Liguori
# By Michael Tokarev (2) and others # Via Michael Tokarev * mjt/trivial-patches: doc: monitor multiplexing rewording block/m25p80: Update Micron entries Fix command example in qemu.sasl slirp: remove mbuf(m_hdr,m_dat) indirection linux-user: declare sys_futex to have 6 arguments Message-id: 1374225073-12959-1-git-send-email-mjt@msgid.tls.msk.ru Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-22Merge remote-tracking branch 'stefanha/block' into stagingAnthony Liguori
# By Peter Lieven (5) and others # Via Stefan Hajnoczi * stefanha/block: block/raw: add .bdrv_get_info block: fix bdrv_read_unthrottled() cpus: Let vm_stop[_force_state]() always flush block devices block-migration: efficiently encode zero blocks block/raw: add bdrv_co_write_zeroes block: add bdrv_write_zeroes() block: fix vvfat error path for enable_write_target QEMUBH: make AioContext's bh re-entrant dataplane: sync virtio.c and vring.c virtqueue state gluster: Add discard support for GlusterFS block driver. gluster: Use pkg-config to configure GlusterFS block driver Message-id: 1374223132-29107-1-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-22Merge remote-tracking branch 'rth/axp-next' into stagingAnthony Liguori
# By Richard Henderson # Via Richard Henderson * rth/axp-next: pc-bios: Update palcode-clipper target-alpha: Move alarm to vm_clock Message-id: 1374161033-11449-1-git-send-email-rth@twiddle.net Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-22Merge remote-tracking branch 'stefanha/tracing' into stagingAnthony Liguori
# By Markus Armbruster # Via Stefan Hajnoczi * stefanha/tracing: trace-events: Fix up source file comments trace-events: Drop unused events milkymist-minimac2: Fix minimac2_read/_write tracepoints slavio_misc: Fix slavio_led_mem_readw/_writew tracepoints cleanup-trace-events.pl: New Message-id: 1374119369-26496-1-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-22hw/arm: Use 'load_ramdisk()' for loading ramdisks w/ U-Boot headerSoren Brinkmann
The load_ramdisk function is used to load ramdisk featuring a U-Boot header. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1373323202-17083-3-git-send-email-soren.brinkmann@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-22hw/loader: Support ramdisk with u-boot headerSoren Brinkmann
Introduce 'load_ramdisk()' which can load "normal" ramdisks and ramdisks with a u-boot header. To enable this and leverage synergies 'load_uimage()' is refactored to accomodate this additional use case. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1373323202-17083-2-git-send-email-soren.brinkmann@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-19vexpress: Add virtio-mmio transportsPeter Maydell
Add some virtio-mmio transports to the vexpress board model, together with a modify_dtb hook which adds them to the device tree so that the kernel will probe for them. We put them in a reserved area of the address map. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1373977512-28932-9-git-send-email-peter.maydell@linaro.org
2013-07-19vexpress: Make VEDBoardInfo extend arm_boot_infoPeter Maydell
Make the VEDBoardInfo struct extend arm_boot_info; this will allow us to get at the VEDBoardInfo information inside callbacks from arm/boot code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1373977512-28932-8-git-send-email-peter.maydell@linaro.org
2013-07-19arm/boot: Allow boards to modify the FDT blobPeter Maydell
Add a callback hook in arm_boot_info to allow board models to modify the device tree blob if they need to. (The major expected use case is to add virtio-mmio nodes for virtio-mmio transports that exist in QEMU but not in the hardware.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1373977512-28932-7-git-send-email-peter.maydell@linaro.org
2013-07-19virtio: Implement MMIO based virtio transportPeter Maydell
Add support for the generic MMIO based virtio transport. This patch includes some fixes for bugs spotted by Ying-Shiuan Pan <yspan@itri.org.tw>. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-id: 1373977512-28932-6-git-send-email-peter.maydell@linaro.org [Fred changes: updated to new virtio-bus mechanisms] Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> [PMM changes: * fixed trivial makefile conflict * removed unused int_enable * host_features doesn't need migrating * reset guest accessible state in the reset function * minor style fixes like extra blank lines * RAZ/WI if there's no backend * made transport size 0x200, in line with kvmtool * set has_variable_vring_alignment ]
2013-07-19virtio: Support transports which can specify the vring alignmentPeter Maydell
Support virtio transports which can specify the vring alignment (ie where the guest communicates this to the host) by providing a new virtio_queue_set_align() function. (The default alignment remains as before.) Transports which wish to make use of this must set the has_variable_vring_alignment field in their VirtioBusClass struct to true; they can then change the alignment via virtio_queue_set_align(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1373977512-28932-5-git-send-email-peter.maydell@linaro.org
2013-07-19virtio: Add support for guest setting of queue sizePeter Maydell
The MMIO virtio transport spec allows the guest to tell the host how large the queue size is. Add virtio_queue_set_num() function which implements this in the QEMU common virtio support code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1373977512-28932-4-git-send-email-peter.maydell@linaro.org
2013-07-19arm/boot: Use qemu_devtree_setprop_sized_cells()Peter Maydell
Replace the opencoded assembly of the reg property array for the /memory node with a call to qemu_devtree_setprop_sized_cells(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1373977512-28932-3-git-send-email-peter.maydell@linaro.org
2013-07-19block/m25p80: Update Micron entriesEd Maste
- Split 32Mb and 256Mb parts into a11 and a13 variants. - Add the 4K sector flag to the 128Mb parts. (These entries were taken from the Linux kernel list, which is missing the flag.) - Fill out the table of sizes with entries for 64Mb parts. Prodded by Peter Crosthwaite. Signed-off-by: Ed Maste <emaste@freebsd.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-19dataplane: sync virtio.c and vring.c virtqueue stateStefan Hajnoczi
Load the virtio.c state into vring.c when we start dataplane mode and vice versa when stopping dataplane mode. This patch makes it possible to start and stop dataplane any time while the guest is running. This will eventually allow us to go back to QEMU main loop for bdrv_drain_all() and live migration. In the meantime, this patch makes the dataplane lifecycle more robust but should make no visible difference. It may be useful in the virtio-net dataplane effort. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-18target-alpha: Move alarm to vm_clockRichard Henderson
Basing the alarm off the rtc_clock was silly. It leads to horrible spinning in the guest after being suspended and resumed, as it tries to catch up with lost ticks. This requires adding an accessor for reading the vm_clock too. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-07-18Merge remote-tracking branch 'awilliam/tags/vfio-for-qemu-1.6' into stagingAnthony Liguori
vfio: enhanced VGA quirks + AER error containment # gpg: Signature made Wed 17 Jul 2013 05:39:38 PM CDT using RSA key ID 3BB08B22 # gpg: Can't check signature: public key not found # By Alex Williamson (1) and Vijay Mohan Pandarathil (1) # Via Alex Williamson * awilliam/tags/vfio-for-qemu-1.6: vfio: QEMU-AER: Qemu changes to support AER for VFIO-PCI devices vfio-pci: VGA quirk update Message-id: 20130717224939.4763.87264.stgit@bling.home Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-18Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
pci,net,pc enhancements This includes some fixes and enhancements that accumulated in my tree: pci fixes by dkoch, virtio-net enhancements by akong and mst, and a fix for xen pc by mst. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 17 Jul 2013 04:44:45 AM CDT using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By Don Koch (2) and others # Via Michael S. Tsirkin * mst/tags/for_anthony: pc: don't access fw cfg if NULL virtio-net: add feature bit for any header s/g net: add support of mac-programming over macvtap in QEMU side pci: fix BRDIGE typo pci-bridge: update mappings for migration/restore Message-id: 1374054430-21966-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-18milkymist-minimac2: Fix minimac2_read/_write tracepointsMarkus Armbruster
Broken in milkymist-minimac.c from the start (commit 0742454), faithfully moved to milkymist-minimac2.c (commit 57aa265). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-18slavio_misc: Fix slavio_led_mem_readw/_writew tracepointsMarkus Armbruster
Broken since they got added in commit 97bf485. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-15vfio: QEMU-AER: Qemu changes to support AER for VFIO-PCI devicesVijay Mohan Pandarathil
Add support for error containment when a VFIO device assigned to a KVM guest encounters an error. This is for PCIe devices/drivers that support AER functionality. When the host OS is notified of an error in a device either through the firmware first approach or through an interrupt handled by the AER root port driver, the error handler registered by the vfio-pci driver gets invoked. The qemu process is signaled through an eventfd registered per VFIO device by the qemu process. In the eventfd handler, qemu decides on what action to take. In this implementation, guest is brought down to contain the error. The kernel patches for the above functionality has been already accepted. This is a refresh of the QEMU patch which was reviewed earlier. http://marc.info/?l=linux-kernel&m=136281557608087&w=2 This patch has the same contents and has been built after refreshing to latest upstream and after the linux headers have been updated in qemu. - Create eventfd per vfio device assigned to a guest and register an event handler - This fd is passed to the vfio_pci driver through the SET_IRQ ioctl - When the device encounters an error, the eventfd is signalled and the qemu eventfd handler gets invoked. - In the handler decide what action to take. Current action taken is to stop the guest. Signed-off-by: Vijay Mohan Pandarathil <vijaymohan.pandarathil@hp.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-07-15vfio-pci: VGA quirk updateAlex Williamson
Turns out all the suspicions for AMD devices were correct, everywhere we read a BAR address that the address matches the config space offset, there's full access to PCI config space. Attempt to generalize some helpers to allow quirks to easily be added for mirrors and windows. Also fill in complete config space for AMD. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-07-15Merge remote-tracking branch 'cohuck/virtio-ccw-upstr' into stagingAnthony Liguori
# By Dominik Dingel # Via Cornelia Huck * cohuck/virtio-ccw-upstr: virtio-ccw: Enable x-data-plane for virtio-ccw-blk Message-id: 1373903207-27085-1-git-send-email-cornelia.huck@de.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-15Merge remote-tracking branch 'pmaydell/tags/pull-arm-devs-20130715' into stagingAnthony Liguori
arm-devs queue # gpg: Signature made Mon 15 Jul 2013 10:53:44 AM CDT using RSA key ID 14360CDE # gpg: Can't check signature: public key not found # By Peter Maydell (4) and others # Via Peter Maydell * pmaydell/tags/pull-arm-devs-20130715: ARM/highbank: add support for Calxeda ECX-2000 / Midway ARM/highbank: prepare for adding similar machines hw/arm/vexpress: Add alias for flash at address 0 on A15 board hw/dma/omap_dma: Fix bugs with DMA requests above 32 sd/pl181.c: Avoid undefined shift behaviour in RWORD macro hw/cpu/a15mpcore: Correct default value for num-irq char/cadence_uart: Fix reset for unattached instances Message-id: 1373904095-27592-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-15Merge remote-tracking branch 'rth/axp-next' into stagingAnthony Liguori
# By Richard Henderson # Via Richard Henderson * rth/axp-next: hw/alpha: Use SRM epoch hw/alpha: Drop latch_tmp hack exec: Support 64-bit operations in address_space_rw hw/alpha: Don't machine check on missing pci i/o hw/alpha: Don't use get_system_io Message-id: 1373840171-25556-1-git-send-email-rth@twiddle.net Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-15pc: don't access fw cfg if NULLMichael S. Tsirkin
commit f8c457b88d72a48989f190bc3d7b79f4f3b7d11c "pc: pass PCI hole ranges to Guests" broke Xen as it has no fw_cfg. Check for this configuration and boil out. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-07-15net: add support of mac-programming over macvtap in QEMU sideAmos Kong
Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-15virtio-ccw: Enable x-data-plane for virtio-ccw-blkDominik Dingel
Add property x-data-plane to virtio-ccw-blk devices. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-07-15ARM/highbank: add support for Calxeda ECX-2000 / MidwayAndre Przywara
The Calxeda ECX-2000 chip (aka. Midway) is model-wise quite similar to the Highbank. The most prominent difference is the Cortex-A15 CPU core in it, together with the associated core peripherals. Add a new ARM machine type called "midway". Move the L2 cache controller device into the Highbank specific part, since Midway does not have (and need) it. Signed-off-by: Andre Przywara <andre.przywara@calxeda.com> Message-id: 1373026897-12085-3-git-send-email-andre.przywara@calxeda.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-15ARM/highbank: prepare for adding similar machinesAndre Przywara
To allow the modelling of machines similar to Calxeda Highbank, introduce a parameter to the init function and call it from a wrapper. This allows to tweak the definition for individual machines later on. Signed-off-by: Andre Przywara <andre.przywara@calxeda.com> Message-id: 1373026897-12085-2-git-send-email-andre.przywara@calxeda.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-15hw/arm/vexpress: Add alias for flash at address 0 on A15 boardPeter Maydell
The A15 Versatile Express board can remap a variety of things at address 0. We don't currently emulate the Serial Configuration Controller which is how the guest can control this remapping, but we can provide the initial default mapping of the first flash device into this space. In particular this allows QEMU to boot flash images such as UEFI which expect to include an exception vector table. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Grant Likely <grant.likely@linaro.org> Message-id: 1373374180-19884-1-git-send-email-peter.maydell@linaro.org
2013-07-15hw/dma/omap_dma: Fix bugs with DMA requests above 32Peter Maydell
The drqbmp field of struct soc_dma_s is a uint64_t; however several places in the code attempt to set bits in it using "(1 << drq)", which will fail if drq is large enough that the 1 bit gets shifted off the top of a 32 bit integer. Change these to "(1ULL << drq)" so that the promotion to 64 bit happens before the shift rather than afterwards. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1372423919-5669-1-git-send-email-peter.maydell@linaro.org
2013-07-15sd/pl181.c: Avoid undefined shift behaviour in RWORD macroPeter Maydell
Add a cast to avoid potentially shifting into the sign bit of a signed value, which is undefined behaviour in C. (Detected with clang's -fsanitize=undefined.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1372341831-4264-1-git-send-email-peter.maydell@linaro.org
2013-07-15hw/cpu/a15mpcore: Correct default value for num-irqPeter Maydell
The a15mpcore device claims that its default value for num-irq is the number of interrupts used by the A15MP in the vexpress-a15 board. However that chip has 128 external interrupts, not 64. Since there is only one A15 based model in QEMU currently, we can fix this by simply changing the default value. This error was causing recent (3.10) Linux kernels to print warnings/backtraces when the number of interrupts reported by the GIC was smaller than an interrupt number they wanted to use. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1373032481-15280-1-git-send-email-peter.maydell@linaro.org
2013-07-15char/cadence_uart: Fix reset for unattached instancesPeter Crosthwaite
commit 1db8b5efe0c2b5000e50691eea61264a615f43de introduced an issue where QEMU would segfault if you have an unattached Cadence UART. Fix by guarding the flush-on-reset logic on there being a qemu_chr attachment. Reported-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Tested-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Message-id: 9009578ee10a50d994b2e10aa2840d73765f5968.1370577272.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-15ahci: Fix FLUSH commandKevin Wolf
AHCI couldn't cope with asynchronous commands that aren't doing DMA, it simply wouldn't complete them. Due to the bug fixed in commit f68ec837, FLUSH commands would seem to have completed immediately even if they were still running on the host. After the commit, they would simply hang and never unset the BSY bit, rendering AHCI unusable on any OS sending flushes. This patch adds another callback for the completion of asynchronous commands. This is what AHCI really wants to use for its command completion logic rather than an DMA completion callback. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-14hw/alpha: Use SRM epochRichard Henderson
The 1980 epoch is used by the ARC PALcode for NT. But we're emulating a system using the SRM PALcode. Using the proper epoch results in less confusion in the guest userland. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-07-14hw/alpha: Drop latch_tmp hackRichard Henderson
The memory and i/o core now support passing 64-bit accesses along from the guest, so we no longer need to emulate them. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-07-13hw/alpha: Don't machine check on missing pci i/oRichard Henderson
Not really correct, but we don't implement all of the random devices that the kernel looks for. This is good enough to keep us booting. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-07-13hw/alpha: Don't use get_system_ioRichard Henderson
Advancements in the ioport subsystem mean that we need no longer thunk memory-mapped i/o through the system-io address space. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-07-11PPC: dbdma: Support more multi-issue DMA requestsAlexander Graf
A DMA request can happen for data that hasn't been completely been provided by the IDE core yet. For example - DBDMA request for 0x1000 bytes - IDE request for 1 sector - DBDMA wants to read 0x1000 bytes (8 sectors) from bdrv - breakage Instead, we should truncate our bdrv request to the maximum number of sectors we're allowed to read at that given time. Once that transfer is through, we will fall into our recently introduced waiting logic. - DBDMA requests for 0x1000 bytes - IDE request for 1 sector - DBDMA wants to read MIN(0x1000, 1 * 512) bytes - DBDMA finishes reading, indicates to IDE core that transfer is complete - IDE request for 7 sectors - DBDMA finishes the DMA Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11PPC: Add timer handler for newworld mac-ioAlexander Graf
Mac OS X accesses fancy timer registers inside of the mac-io on bootup. These really should be ticking at the mac-io bus frequency, but I don't see anyone upset when we just make them as fast as we want to. With this patch on top of my previous patch queue and latest OpenBIOS I am able to boot Mac OS X 10.4 with -M mac99. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11PPC: dbdma: Support unaligned DMA accessAlexander Graf
The DBDMA engine really just reads bytes from a producing device (IDE in our case) and shoves these bytes into memory. It doesn't care whether any alignment takes place or not. Our code today however assumes that block accesses always happen on sector (512 byte) boundaries. This is a fair assumption for most cases. However, Mac OS X really likes to do unaligned, incomplete accesses that it finishes with the next DMA request. So we need to read / write the unaligned bits independent of the actual asynchronous request, because that one can only handle 512-byte-aligned data. We also need to cache these unaligned sectors until the next DMA request, at which point the data might be successfully flushed from the pipe. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11PPC: dbdma: Wait for DMA until we have dataAlexander Graf
We should only start processing DMA requests when we have data to process. Hold off working through the DMA shuffling until the IDE core told us that it's ready. This is required because the guest can program the DMA engine or the IDE transfer first. Both are legal. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11PPC: dbdma: Move processing to ioAlexander Graf
Soon we will introduce intermediate processing pauses which will allow the bottom half to restart a DMA request that couldn't be fulfilled yet. For that to work, move the processing variable into the io struct which is what DMA providers work with. While touching it, also change it into a bool Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11PPC: dbdma: macio: Add DMA callbackAlexander Graf
We need to know when the IDE core starts a DMA transfer. Add a notifier function so we have the chance to start transmitting data. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11PPC: dbdma: Move static bh variable to device structAlexander Graf
The DBDMA controller has a bottom half to asynchronously process DMA request queues. This bh was stored as a gross static variable. Move it into the device struct instead. While at it, move all users of it to the new generic kick function. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11PPC: dbdma: Introduce kick functionAlexander Graf
The DBDMA engine really is running all the time, waiting for input. However we don't want to waste cycles constantly polling. So introduce a kick function that data providers can call to notify the DBDMA controller of new input. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11PPC: dbdma: Move defines into header fileAlexander Graf
We usually keep struct and constant definitions in header files. Move them there to stay consistent and to make access to fields easier. Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-30 09:01:31 +0000