Age | Commit message (Collapse) | Author |
|
Currently dma_bdrv_io() takes a 'to_dev' boolean parameter to
determine the direction of DMA it is emulating. We already have a
DMADirection enum designed specifically to encode DMA directions.
This patch uses it for dma_bdrv_io() as well. This involves removing
the DMADirection definition from the #ifdef it was inside, but since that
only existed to protect the definition of dma_addr_t from places where
config.h is not included, there wasn't any reason for it to be there in
the first place.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Storage interfaces like virtio-blk can be configured with block size
information so that the guest can take advantage of efficient I/O
request sizes.
According to the SCSI Block Commands (SBC) standard a device's block
size is "almost always greater than one byte and may be a multiple of
512 bytes". QEMU currently has a 512 byte minimum block size because
the block layer functions work at that granularity. Furthermore, the
block size should be a power of 2 because QEMU calculates bitmasks from
the value.
Introduce a "blocksize" property type so devices can enforce these
constraints on block size values. If the constraints are relaxed in the
future then this property can be updated.
Introduce the new PropertyValueNotPowerOf2 QError so QMP clients know
exactly why a block size value was rejected.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Allow the user to specify a disk's World Wide Name.
Linux guests can address disks by their unique World Wide Name number
(e.g. /dev/disk/by-id/wwn-0x5001517959123522). This patch adds support
for assigning a World Wide Name number to a virtual IDE disk.
Cc: kwolf@redhat.com
Signed-off-by: Floris Bos <dev@noc-ps.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
strncpy may not null-terminate the destination string.
Cc: kwolf@redhat.com
Signed-off-by: Floris Bos <dev@noc-ps.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Allow the user to override the default disk model name "QEMU HARDDISK".
Some Linux distributions use the /dev/disk/by-id/scsi-SATA_name-of-disk-
model_serial addressing scheme when refering to partitions in /etc/fstab
and elsewhere. This causes problems when starting a disk image taken from
an existing physical server under qemu, because when running under qemu
name-of-disk-model is always "QEMU HARDDISK".
This patch introduces a model=s option which in combination with the
existing serial=s option can be used to fake the disk the operating
system was previously on, allowing the OS to boot properly.
Cc: kwolf@redhat.com
Signed-off-by: Floris Bos <dev@noc-ps.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Reserved bits should be cleared to zero.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
And remove several block_int.h inclusions that should not be there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The vector interrupt has higher priority than interrupt_level_n.
Also check only interrupt_level_n concurency when TL > 0, the traps of
other types may be nested.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Don't produce stray irq 5, don't overwrite ivec_data if still busy with
processing of the previous interrupt.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Avoid cluttering too much the QOM root.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
A strong limitation of QOM right now is that unconverted ports
(e.g. all...) do not give a canonical path to devices that are
part of the board. This in turn makes it impossible to replace
PROP_PTR with a QOM link for example.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
We want the composition tree to to be in order by the time we call
qdev_init, so that a single set of the toplevel realize property can
propagate all the way down the composition tree.
This is not the case so far. Unfortunately, this is incompatible
with calling qdev_init in the constructor wrappers for devices,
so for now we need to unattach some devices that are created through
those wrappers. This will be fixed by removing qdev_init and instead
setting the toplevel realize property after machine init.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This is QOM "mkdir -p". It is useful when referring to
container objects such as "/machine".
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
We never actually clear the TEMT (transmit sending register empty) flag when
populating the TSR. We set the flag, but since it's never cleared, setting it
is sort of pointless..
I found this with a unit test case.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
I'm not sure if the retry logic has ever worked when not using FIFO mode. I
found this while writing a test case although code inspection confirms it is
definitely broken.
The TSR retry logic will never actually happen because it is guarded by an
'if (s->tsr_rety > 0)' but this is the only place that can ever make the
variable greater than zero. That effectively makes the retry logic an 'if (0)'.
I believe this is a typo and the intention was >= 0. Once this is fixed though,
I see double transmits with my test case. This is because in the non FIFO
case, serial_xmit may get invoked while LSR.THRE is still high because the
character was processed but the retransmit timer was still active.
We can handle this by simply checking for LSR.THRE and returning early. It's
possible that the FIFO paths also need some attention.
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This bug existed since the first commit. Fortunately, the affected
registers have no functionality in qemu. This will only prevent the
following warning:
milkymist_vgafb: write access to unknown register 0x00000034
Signed-off-by: Michael Walle <michael@walle.cc>
|
|
The new version introduces the following new registers:
- SoC clock frequency: read-only of system clock used on the SoC
- debug scratchpad: 8 bit scratchpad register
- debug write lock: write once register, without any function on QEMU
Signed-off-by: Michael Walle <michael@walle.cc>
|
|
git://git.linaro.org/people/pmaydell/qemu-arm
* 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
pl031: switch clock base to rtc_clock
pl031: rearm alarm timer upon load
arm: switch real-time clocks to rtc_clock
omap: switch omap_lpg to vm_clock
rtc: add -rtc clock=rt
|
|
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Since /i440fx/piix3 is being removed from the composition tree, the
IO-APIC is placed under /i440fx. This is wrong and should be changed
as soon as the /i440fx/piix3 path is put back.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This lets the user specify the desired semantics. By default, the RTC
will follow adjustments from the host's NTP client, and will remain in
sync when the virtual machine is stopped. The previous behavior, which
provides determinism with both icount and qtest, remains available with
"-rtc clock=vm".
pl031 supports migration, so we need to convert the time base from
rtc_clock to vm_clock and back for backwards compatibility. (The
rtc_clock may not be synchronized on the two machines, especially with
savevm/loadvm, so the conversion is needed anyway. And since any time
base will do, why not pick the one base that is backwards compatible).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This lets the user specify the desired semantics. By default, the RTC
will follow adjustments from the host's NTP client. "-rtc clock=vm" will
improve determinism with both icount and qtest. Finally, the previous
behavior is available with "-rtc clock=rt".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The output of the pulse generator needs to be deterministic when
running in -icount mode, and to remain constant whenever the VM is
stopped. So the right clock to use is vm_clock.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
* sstabellini/disk_io:
xen_disk: when using AIO flush after the operation is completed
xen_disk: open disk with BDRV_O_NOCACHE | BDRV_O_CACHE_WB | BDRV_O_NATIVE_AIO
|
|
We need to detach the blkdev from the BlockDriverState before calling
bdrv_delete.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
The first console has a different location compared to other PV devices
(console, rather than device/console/0) and doesn't obey the xenstore
state protocol. We already special case the first console in con_init
and con_initialise, we should also do it in con_disconnect.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
Commit 45efb16124efef51de5157afc31984b5a47700f9 optimized a bit too
much. We can skip the vga_invalidate_display() in case no console
switch happened because we don't need a full redraw then. We can *not*
skip vga_hw_update() though, because the screen content will be stale
then in case nobody else calls vga_hw_update().
Trigger: vga textmode with vnc display and no client connected.
Reported-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Alon Levy <alevy@redhat.com>
Tested-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
If ioreq->postsync call bdrv_flush when the AIO operation is actually
completed.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
* sstabellini/saverestore-8:
xen: do not allocate RAM during INMIGRATE runstate
xen mapcache: check if memory region has moved.
xen: record physmap changes to xenstore
Set runstate to INMIGRATE earlier
Introduce "xen-save-devices-state"
cirrus_vga: do not reset videoram
Conflicts:
qapi-schema.json
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
* stefanha/trivial-patches:
qemu-ga: for w32, fix leaked handle ov.hEvent in ga_channel_write()
ioapic: fix build with DEBUG_IOAPIC
.gitignore: add qemu-bridge-helper and option rom build products
cleanup obsolete typedef
monitor: Remove unused bool field 'qapi' in mon_cmd_t struct
ds1338: Add missing break statement
vnc: Fix packed boolean struct members
Remove type field in ModuleEntry as it's not used
|
|
* spice/spice.v50:
spice: fix broken initialization
hw/qxl.c: Fix compilation failures on 32 bit hosts
qxl/qxl_render.c: add trace events
qxl: switch qxl.c to trace-events
qxl: init_pipe_signaling: exit on failure
monitor: fix client_migrate_info error handling
spice: set spice uuid and name
|
|
* bonzini/scsi-next:
scsi: add get_dev_path
virtio-scsi: call unregister_savevm properly
scsi: copy serial number into VPD page 0x83
scsi-cd: check ready condition before processing several commands
get rid of CONFIG_VIRTIO_SCSI
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This fixes a use-after-free when migrating after hot-unplug.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently QEMU passes the qdev device id to the guest in an ASCII-string
designator in page 0x83. While this is fine, it does not match what
real hardware does; usually the ASCII-string designator there hosts
another copy of the serial number (there can be other designators,
for example with a world-wide name). Do the same for QEMU SCSI
disks.
ATAPI does not support VPD pages, so it does not matter there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This commit is more or less obvious. What it caused is less obvious:
SCSI CD drives failed to eject under Linux, though for example the
"change" command worked okay. This happens because of the autoclose
option in the Linux CD-ROM driver.
The actual chain of events is quite complex and somehow involves
udev helpers; the actual command that matters is READ TOC, though
honestly it's not really clear to me how because it should always be
invoked after autoclose, not before.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
* qemu-kvm/memory/urgent: (42 commits)
memory: check for watchpoints when getting code ram_addr
exec: fix write tlb entry misused as iotlb
Sparc: avoid AREG0 wrappers for memory access helpers
Sparc: avoid AREG0 for memory access helpers
TCG: add 5 arg helpers to def-helper.h
softmmu templates: optionally pass CPUState to memory access functions
i386: Remove REGPARM
sparc64: implement PCI and ISA irqs
sparc: reset CPU state on reset
apb: use normal PCI device header for PBM device
w64: Fix data type of next_tb and tcg_qemu_tb_exec
softfloat: fix for C99
vmstate: fix varrays with uint32_t indexes
Fix large memory chunks allocation with tcg_malloc.
hw/pxa2xx.c: Fix handling of pxa2xx_i2c variable offset within region
hw/pxa2xx_lcd.c: drop target_phys_addr_t usage in device state
hw/pxa2xx_dma.c: drop target_phys_addr_t usage in device state
ARM: Remove unnecessary subpage workarounds
malta: Fix display for LED array
malta: Use symbolic hardware addresses
...
|
|
Fix compilation failures on 32 bit hosts (cast from pointer to
integer of different size; %ld expects 'long int' not uint64_t).
Reported-by: Steve Langasek <steve.langasek@canonical.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Alon Levy <alevy@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
dprint is still used for qxl_init_common one time prints.
also switched parts of spice-display.c over, mainly all the callbacks to
spice server.
All qxl device trace events start with the qxl device id.
Signed-off-by: Alon Levy <alevy@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
If pipe creation fails, exit, don't log and continue. Fix indentation at
the same time.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
ioapic.c:198: error: format ‘%08x’ expects type ‘unsigned int’, but argument 3 has type ‘uint64_t’
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
Without the break statement, case 5 sets month and year from the same
data. This does not look correct.
The missing break was reported by splint.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
Generate correct trap for external interrupts. Map PCI and ISA IRQs to
RIC/UltraSPARC-IIi interrupt vectors.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
PBM has a normal PCI device header, fix.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
git://git.linaro.org/people/pmaydell/qemu-arm
* 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
hw/pxa2xx.c: Fix handling of pxa2xx_i2c variable offset within region
hw/pxa2xx_lcd.c: drop target_phys_addr_t usage in device state
hw/pxa2xx_dma.c: drop target_phys_addr_t usage in device state
ARM: Remove unnecessary subpage workarounds
hw/omap_i2c: Convert to qdev
|
|
* 'malta' of git://qemu.weilnetz.de/qemu:
malta: Fix display for LED array
malta: Use symbolic hardware addresses
malta: Always allocate flash memory
malta: Clean allocation of bios region alias
|
|
The qdev property release function frees any string properties. This was
resulting in a double free during hot unplug.
It manifests in network devices because block devices have a NULL romfile
property by default.
Cc: Michael Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|