aboutsummaryrefslogtreecommitdiff
path: root/hw/sd
AgeCommit message (Collapse)Author
2015-12-07sd: Mark brittle abuse of blk_attach_dev() FIXMEMarkus Armbruster
blk_attach_dev() fails here only when we're working for device "sdhci-pci" (which already attached the backend), and then we don't want to attach a second time. If we ever create another failure mode, we're setting up ourselves to using the same backend from multiple frontends, which is likely to end in tears. Can't clean this up this close to the release, so mark it FIXME. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1449503710-3707-3-git-send-email-armbru@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-07sdhci: Sanitize "sdhci-pci" properties for future qomificationMarkus Armbruster
We currently fuse controller and card into a single device model, but we intend qomify things properly and separate the two. The properties that really belong to the card would then have to somehow pass-through to the card's properties. To avoid that complication, either mark them experimental or drop them. Properties "capareg", "maxcurr" and the usual PCI device properties belong to the controller. Property "drive" belongs to the card; rename it to "x-drive". Properties "logical_block_size", "physical_block_size", "min_io_size", "opt_io_size", "discard_granularity" belong to the card, but have no effect; drop them. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1449503710-3707-2-git-send-email-armbru@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-29sdhci: Split sdhci.h for public and internal device usageSai Pavan Boddu
Split sdhci.h into pubilc version (i.e include/hw/sd/sdhci.h) and internal version (i.e hw/sd/sdhci-interna.h) based on register declarations and object declaration. Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-29sd.h: Move sd.h to include/hw/sd/Sai Pavan Boddu
Create a sd directory under include/hw/ and move sd.h to include/hw/sd/ Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-12sdhci.c: Limit the maximum block sizeAlistair Francis
It is possible for the guest to set an invalid block size which is larger then the fifo_buffer[] array. This could cause a buffer overflow. To avoid this limit the maximum size of the blksize variable. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reported-by: Intel Security ATR <secure@intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: abe4c51f513290bbb85d1ee271cb1a3d463d7561.1444067470.git.alistair.francis@xilinx.com Suggested-by: Igor Mitsyanko <i.mitsyanko@gmail.com> Reported-by: Intel Security ATR <secure@intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-12sdhci: Pass drive parameter to sdhci-pci via qdev propertyKevin O'Connor
Commit 19109131 disabled the sdhci-pci support because it used drive_get_next(). This patch reenables sdhci-pci and changes it to pass the drive via a qdev property - for example: -device sdhci-pci,drive=drive0 -drive id=drive0,if=sd,file=myimage Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-08sdhci: Change debug prints to compile unconditionallySai Pavan Boddu
Conditional compilation hides few type mismatch warnings, fix it to compile unconditionally. Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com> Suggested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08sdhci: use PRIx64 for uint64_t typeSai Pavan Boddu
Fix compile time warnings, because of type mismatch for unsigned long long type. Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11typofixes - v4Veres Lajos
Signed-off-by: Veres Lajos <vlajos@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: avoid useless "if (foo) free(foo)" patternMarkus Armbruster
My Coccinelle semantic patch finds a few more, because it also fixes up the equally pointless conditional if (foo) { free(foo); foo = NULL; } Result (feel free to squash it into your patch): Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: avoid useless "if (foo) free(foo)" patternDaniel P. Berrange
The free() and g_free() functions both happily accept NULL on any platform QEMU builds on. As such putting a conditional 'if (foo)' check before calls to 'free(foo)' merely serves to bloat the lines of code. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-07arm: Use g_new() & friends where that makes obvious senseMarkus Armbruster
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer, for two reasons. One, it catches multiplication overflowing size_t. Two, it returns T * rather than void *, which lets the compiler catch more type errors. This commit only touches allocations with size arguments of the form sizeof(T). Coccinelle semantic patch: @@ type T; @@ -g_malloc(sizeof(T)) +g_new(T, 1) @@ type T; @@ -g_try_malloc(sizeof(T)) +g_try_new(T, 1) @@ type T; @@ -g_malloc0(sizeof(T)) +g_new0(T, 1) @@ type T; @@ -g_try_malloc0(sizeof(T)) +g_try_new0(T, 1) @@ type T; expression n; @@ -g_malloc(sizeof(T) * (n)) +g_new(T, n) @@ type T; expression n; @@ -g_try_malloc(sizeof(T) * (n)) +g_try_new(T, n) @@ type T; expression n; @@ -g_malloc0(sizeof(T) * (n)) +g_new0(T, n) @@ type T; expression n; @@ -g_try_malloc0(sizeof(T) * (n)) +g_try_new0(T, n) @@ type T; expression p, n; @@ -g_realloc(p, sizeof(T) * (n)) +g_renew(T, p, n) @@ type T; expression p, n; @@ -g_try_realloc(p, sizeof(T) * (n)) +g_try_renew(T, p, n) @@ type T; expression n; @@ -(T *)g_new(T, n) +g_new(T, n) @@ type T; expression n; @@ -(T *)g_new0(T, n) +g_new0(T, n) @@ type T; expression p, n; @@ -(T *)g_renew(T, p, n) +g_renew(T, p, n) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1440524394-15640-1-git-send-email-armbru@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15hw/sd/pxa2xx_mmci: Stop using old_mmio in MemoryRegionOpsPeter Maydell
Update the pxa2xx_mmci device to stop using the old_mmio read and write callbacks in its MemoryRegionOps. This actually simplifies the code because the separate byte/halfword/word access functions were all calling into a single function to do the work anyway. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1434117989-7367-6-git-send-email-peter.maydell@linaro.org
2015-05-12hw/sd: Don't pass BlockBackend to sd_reset()Peter Maydell
The only valid BlockBackend to pass to sd_reset() is the one for the SD card, which is sd->blk. Drop the second argument from this function in favour of having it just use sd->blk. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1430683444-9797-1-git-send-email-peter.maydell@linaro.org
2015-04-28sd: convert sd_normal_command() ffs(3) call to ctz32()Stefan Hajnoczi
ffs() cannot be replaced with ctz32() when the argument might be zero, because ffs(0) returns 0 while ctz32(0) returns 32. The ffs(3) call in sd_normal_command() is a special case though. It can be converted to ctz32() + 1 because the argument is never zero: if (!(req.arg >> 8) || (req.arg >> (ctz32(req.arg & ~0xff) + 1))) { ~~~~~~~~~~~~~~~ ^--------------- req.arg cannot be zero Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1427124571-28598-7-git-send-email-stefanha@redhat.com Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-02sysbus: Make devices picking up backends unavailable with -deviceMarkus Armbruster
Device models aren't supposed to go on fishing expeditions for backends. They should expose suitable properties for the user to set. For onboard devices, board code sets them. A number of sysbus devices pick up block backends in their init() / instance_init() methods with drive_get_next() instead: sl-nand, milkymist-memcard, pl181, generic-sdhci. Likewise, a number of sysbus devices pick up character backends in their init() / realize() methods with qemu_char_get_next_serial(): cadence_uart, digic-uart, etraxfs,serial, lm32-juart, lm32-uart, milkymist-uart, pl011, stm32f2xx-usart, xlnx.xps-uartlite. All these mistakes are already marked FIXME. See the commit that added these FIXMEs for a more detailed explanation of what's wrong. Fortunately, only machines ppce500 and pseries-* support -device with sysbus devices, and none of the devices above is supported with these machines. Set cannot_instantiate_with_device_add_yet to preserve our luck. Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Cc: Antony Pavlov <antonynpavlov@gmail.com> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Michael Walle <michael@walle.cc> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-04-02sdhci: Make device "sdhci-pci" unavailable with -deviceMarkus Armbruster
Device models aren't supposed to go on fishing expeditions for backends. They should expose suitable properties for the user to set. For onboard devices, board code sets them. "sdhci-pci" picks up its block backend in its realize() method with drive_get_next() instead. Already marked FIXME. See the commit that added the FIXME for a more detailed explanation of what's wrong. We can't fix this in time for the release, but since the device is new in 2.3, we can set cannot_instantiate_with_device_add_yet to disable it before this mistake becomes ABI, and we have to support command lines like $ qemu -drive if=sd -drive if=sd,file=sd.img -device sdhci-pci -device sdhci-pci forever. Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-04-02hw: Mark devices picking up block backends actively FIXMEMarkus Armbruster
Drives defined with if!=none are for board initialization to wire up. Board code calls drive_get() or similar to find them, and creates devices with their qdev drive properties set accordingly. Except a few devices go on a fishing expedition for a suitable backend instead of exposing a drive property for board code to set: they call driver_get() or drive_get_next() in their realize() or init() method to implicitly connect to the "next" backend with a certain interface type. Picking up backends that way works when the devices are created by board code. But it's inappropriate for -device or device_add. Not only is this inconsistent with how the other block device models work (they connect to a backend explicitly identified by a "drive" property), it breaks when the "next" backend has been picked up by the board already. Example: $ qemu-system-arm -S -M connex -pflash flash.img -device ssi-sd Aborted (core dumped) Mark them with suitable FIXME comments. Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Cc: "Andreas Färber" <andreas.faerber@web.de> Cc: Michael Walle <michael@walle.cc> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-03-19omap: Fix warnings from SparseStefan Weil
Sparse report: arm/omap1.c:1015:9: warning: returning void-valued expression arm/omap1.c:1084:9: warning: returning void-valued expression arm/omap1.c:1178:9: warning: returning void-valued expression arm/omap1.c:1287:9: warning: returning void-valued expression arm/omap1.c:1382:9: warning: returning void-valued expression arm/omap1.c:1650:9: warning: returning void-valued expression arm/omap1.c:1778:9: warning: returning void-valued expression arm/omap1.c:1985:9: warning: returning void-valued expression arm/omap1.c:210:9: warning: returning void-valued expression arm/omap1.c:2213:9: warning: returning void-valued expression arm/omap1.c:2352:9: warning: returning void-valued expression arm/omap1.c:2447:9: warning: returning void-valued expression arm/omap1.c:2640:9: warning: returning void-valued expression arm/omap1.c:317:9: warning: returning void-valued expression arm/omap1.c:3413:13: warning: returning void-valued expression arm/omap1.c:3414:13: warning: returning void-valued expression arm/omap1.c:3415:14: warning: returning void-valued expression arm/omap1.c:3589:9: warning: returning void-valued expression arm/omap1.c:443:9: warning: returning void-valued expression arm/omap1.c:588:9: warning: returning void-valued expression arm/omap1.c:860:9: warning: returning void-valued expression arm/omap2.c:1362:9: warning: returning void-valued expression arm/omap2.c:450:9: warning: returning void-valued expression arm/omap2.c:695:9: warning: returning void-valued expression arm/omap2.c:760:9: warning: returning void-valued expression hw/char/omap_uart.c:115:9: warning: returning void-valued expression hw/display/omap_dss.c:1019:9: warning: returning void-valued expression hw/display/omap_dss.c:215:9: warning: returning void-valued expression hw/display/omap_dss.c:380:9: warning: returning void-valued expression hw/display/omap_dss.c:739:9: warning: returning void-valued expression hw/display/omap_dss.c:931:9: warning: returning void-valued expression hw/dma/omap_dma.c:139:5: warning: returning void-valued expression hw/dma/omap_dma.c:1505:9: warning: returning void-valued expression hw/dma/omap_dma.c:1860:9: warning: returning void-valued expression hw/gpio/omap_gpio.c:116:9: warning: returning void-valued expression hw/misc/omap_gpmc.c:627:9: warning: returning void-valued expression hw/misc/omap_l4.c:85:9: warning: returning void-valued expression hw/misc/omap_sdrc.c:95:9: warning: returning void-valued expression hw/misc/omap_tap.c:98:9: warning: returning void-valued expression hw/sd/omap_mmc.c:409:9: warning: returning void-valued expression hw/ssi/omap_spi.c:229:9: warning: returning void-valued expression hw/timer/omap_gptimer.c:447:9: warning: returning void-valued expression Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-26pci: Trivial device model conversions to realizeMarkus Armbruster
Convert the device models where initialization obviously can't fail. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com>
2015-01-26vmstate: accept QEMUTimer in VMSTATE_TIMER*, add VMSTATE_TIMER_PTR*Paolo Bonzini
Old users of VMSTATE_TIMER* are mechanically changed to VMSTATE_TIMER_PTR variants. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15sdhci: Support SDHCI devices on PCIKevin O'Connor
Support for PCI devices following the "SD Host Controller Simplified Specification Version 2.00" spec. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15sdhci: Add "sysbus" to sdhci QOM types and methodsKevin O'Connor
Update the sdhci sysbus QOM types and methods so that sysbus is in their name. This is in preparation for adding PCI versions of these types and methods. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15sdhci: Remove class "virtual" methodsKevin O'Connor
The SDHCIClass defines a series of class "methods". However, no code in the QEMU tree overrides these methods or even uses them outside of sdhci.c. Remove the virtual methods and replace them with direct calls to the underlying functions. This simplifies the process of extending the sdhci code to support PCI devices (which have a different parent class). Signed-off-by: Kevin O'Connor <kevin@koconnor.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15sdhci: Set a default frequency clockKevin O'Connor
The Linux SDHCI PCI driver will only register the device if there is a clock frequency set. So, set a default frequency of 52Mhz. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-20hw: Convert from BlockDriverState to BlockBackend, mostlyMarkus Armbruster
Device models should access their block backends only through the block-backend.h API. Convert them, and drop direct includes of inappropriate headers. Just four uses of BlockDriverState are left: * The Xen paravirtual block device backend (xen_disk.c) opens images itself when set up via xenbus, bypassing blockdev.c. I figure it should go through qmp_blockdev_add() instead. * Device model "usb-storage" prompts for keys. No other device model does, and this one probably shouldn't do it, either. * ide_issue_trim_cb() uses bdrv_aio_discard() instead of blk_aio_discard() because it fishes its backend out of a BlockAIOCB, which has only the BlockDriverState. * PC87312State has an unused BlockDriverState[] member. The next two commits take care of the latter two. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20block: Eliminate DriveInfo member bdrv, use blk_by_legacy_dinfo()Markus Armbruster
The patch is big, but all it really does is replacing dinfo->bdrv by blk_bs(blk_by_legacy_dinfo(dinfo)) The replacement is repetitive, but the conversion of device models to BlockBackend is imminent, and will shorten it to just blk_legacy_dinfo(dinfo). Line wrapping muddies the waters a bit. I also omit tests whether dinfo->bdrv is null, because it never is. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-04sd: sdhci: Fix ADMA dma_memory_read accessPeter Crosthwaite
This dma_memory_read was giving too big a size when begin was non-zero. This could cause segfaults in some circumstances. Fix. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-30hw: Fix qemu_allocate_irqs() leaksAndreas Färber
Replace qemu_allocate_irqs(foo, bar, 1)[0] with qemu_allocate_irq(foo, bar, 0). This avoids leaking the dereferenced qemu_irq *. Cc: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de> [PC Changes: * Applied change to instance in sh4/sh7750.c ] Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Kirill Batuzov <batuzovk@ispras.ru> [AF: Fix IRQ index in sh4/sh7750.c] Cc: qemu-stable@nongnu.org Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-06-30sdhci: Fix misuse of qemu_free_irqs()Andreas Färber
It does a g_free() on the pointer, so don't pass a local &foo reference. Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-stable@nongnu.org Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-06-10hw/sd/sd.c: Drop unused sd_acmd_type[] arrayPeter Maydell
Drop the sd_acmd_type[] array: it is never used. (The equivalent sd_cmd_type[] array for normal commands is used to identify those commands whose argument includes the card address in the top 16 bits; but for app commands the card address is passed with the APP_CMD prefix, not with the argument to the app command itself.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-05-14savevm: Remove all the unneeded version_minimum_id_old (rest)Juan Quintela
After previous Peter patch, they are redundant. This way we don't assign them except when needed. Once there, there were lots of case where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (appart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-05ssi-sd: fix buffer overrun on invalid state loadMichael S. Tsirkin
CVE-2013-4537 s->arglen is taken from wire and used as idx in ssi_sd_transfer(). Validate it before access. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-03-12ssi: Convert legacy SSI_SLAVE -> DEVICE castsPeter Crosthwaite
Convert legacy ->qdev style casts from TYPE_SSI_SLAVE to TYPE_DEVICE. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> [AF: Introduce local DeviceState variable for transition to QOM realize] Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-20Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' ↵Peter Maydell
into staging QOM infrastructure fixes and device conversions * QTest cleanups and test cases for PCI NICs * NAND fix for "info qtree" * Cleanup and extension of QOM machine tests * IndustryPack test cases and conversion to QOM realize * I2C cleanups * Cleanups of legacy qdev properties # gpg: Signature made Mon 17 Feb 2014 22:15:37 GMT using RSA key ID 3E7E013F # gpg: Good signature from "Andreas Färber <afaerber@suse.de>" # gpg: aka "Andreas Färber <afaerber@suse.com>" * remotes/afaerber/tags/qom-devices-for-peter: (49 commits) qtest: Include system headers before user headers qapi: Refine human printing of sizes qdev: Use QAPI type names for properties qdev: Add enum property types to QAPI schema block: Handle "rechs" and "large" translation options qdev: Remove hex8/32/64 property types qdev: Remove most legacy printers qdev: Use human mode in "info qtree" qapi: Add human mode to StringOutputVisitor qdev: Inline qdev_prop_parse() qdev: Legacy properties are just strings qdev: Legacy properties are now read-only qdev: Remove legacy parsers for hex8/32/64 qdev: Sizes are now parsed by StringInputVisitor qapi: Add size parser to StringInputVisitor qtest: Don't segfault with invalid -qtest option ipack: Move IndustryPack out of hw/char/ ipoctal232: QOM parent field cleanup ipack: QOM parent field cleanup for IPackDevice ipack: QOM parent field cleanup for IPackBus ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-14qdev: Remove hex8/32/64 property typesPaolo Bonzini
Replace them with uint8/32/64. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14sdhci: Drop unnecessary #includeKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-23sysbus: Set cannot_instantiate_with_device_add_yetMarkus Armbruster
device_add plugs devices into suitable bus. For "real" buses, that actually connects the device. For sysbus, the connections need to be made separately, and device_add can't do that. The device would be left unconnected, and could not possibly work. Quite a few, but not all sysbus devices already set cannot_instantiate_with_device_add_yet in their class init function. Set it in their abstract base's class init function sysbus_device_class_init(), and remove the now redundant assignments from device class init functions. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23qdev: Replace no_user by cannot_instantiate_with_device_add_yetMarkus Armbruster
In an ideal world, machines can be built by wiring devices together with configuration, not code. Unfortunately, that's not the world we live in right now. We still have quite a few devices that need to be wired up by code. If you try to device_add such a device, it'll fail in sometimes mysterious ways. If you're lucky, you get an unmysterious immediate crash. To protect users from such badness, DeviceClass member no_user used to make device models unavailable with -device / device_add, but that regressed in commit 18b6dad. The device model is still omitted from help, but is available anyway. Attempts to fix the regression have been rejected with the argument that the purpose of no_user isn't clear, and it's prone to misuse. This commit clarifies no_user's purpose. Anthony suggested to rename it cannot_instantiate_with_device_add_yet_due_to_internal_bugs, which I shorten somewhat to keep checkpatch happy. While there, make it bool. Every use of cannot_instantiate_with_device_add_yet gets a FIXME comment asking for rationale. The next few commits will clean them all up, either by providing a rationale, or by getting rid of the use. With that done, the regression fix is hopefully acceptable. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-10-17sd: Avoid access to NULL BlockDriverStateAndreas Färber
Commit 4f8a066b5fc254eeaabbbde56ba4f5b29cc68fdf (blockdev: Remove IF_* check for read-only blockdev_init) added a usage of bdrv_is_read_only() to sd_init(), which is called for versatilepb, versatileab and xilinx-zynq-a9 machines among others with NULL argument by default, causing the new qom-test to fail. Add a check to prevent this. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-10-11blockdev: Remove IF_* check for read-only blockdev_initKevin Wolf
IF_NONE allows read-only, which makes forbidding it in this place for other types pretty much pointless. Instead, make sure that all devices for which the check would have errored out check in their init function that they don't get a read-only BlockDriverState. This catches even cases where IF_NONE and -device is used. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-08-22aio / timers: Switch entire codebase to the new timer APIAlex Bligh
This is an autogenerated patch using scripts/switch-timer-api. Switch the entire code base to using the new timer API. Note this patch may introduce some line length issues. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-29pl181: QOM cast cleanupAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29pl181: Rename pl181_state to PL181StateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29milkymist-memcard: QOM cast cleanupAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-15sd/pl181.c: Avoid undefined shift behaviour in RWORD macroPeter Maydell
Add a cast to avoid potentially shifting into the sign bit of a signed value, which is undefined behaviour in C. (Detected with clang's -fsanitize=undefined.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1372341831-4264-1-git-send-email-peter.maydell@linaro.org
2013-07-04hw/s*: pass owner to memory_region_init* functionsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04memory: add owner argument to initialization functionsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-21sd: pass bool parameter for sd_initliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-20dma: eliminate DMAContextPaolo Bonzini
The DMAContext is a simple pointer to an AddressSpace that is now always already available. Make everyone hold the address space directly, and clean up the DMA API to use the AddressSpace directly. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-14 21:37:50 +0000