aboutsummaryrefslogtreecommitdiff
path: root/hw/nvram
AgeCommit message (Collapse)Author
2017-07-13Convert error_report() to warn_report()Alistair Francis
Convert all uses of error_report("warning:"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these two commands: find ./* -type f -exec sed -i \ 's|error_report(".*warning[,:] |warn_report("|Ig' {} + Indentation fixed up manually afterwards. The test-qdev-global-props test case was manually updated to ensure that this patch passes make check (as the test cases are case sensitive). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Suggested-by: Thomas Huth <thuth@redhat.com> Cc: Jeff Cody <jcody@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Lieven <pl@kamp.de> Cc: Josh Durgin <jdurgin@redhat.com> Cc: "Richard W.M. Jones" <rjones@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Greg Kurz <groug@kaod.org> Cc: Rob Herring <robh@kernel.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Peter Chubb <peter.chubb@nicta.com.au> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Alexander Graf <agraf@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Greg Kurz <groug@kaod.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au> Acked-by: Max Reitz <mreitz@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-03fw_cfg: move setting of FW_CFG_VERSION_DMA bit to fw_cfg_init1()Mark Cave-Ayland
The setting of the FW_CFG_VERSION_DMA bit is the same across both the TYPE_FW_CFG_MEM and TYPE_FW_CFG_IO devices, so unify the logic in fw_cfg_init1(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Gabriel Somlo <somlo@cmu.edu>
2017-07-03fw_cfg: don't map the fw_cfg IO ports in fw_cfg_io_realize()Mark Cave-Ayland
As indicated by Laszlo it is a QOM bug for the realize() method to actually map the device. Set up the IO regions within fw_cfg_io_realize() and defer the mapping with sysbus_add_io() to the caller, as already done in fw_cfg_init_mem_wide(). This makes the iobase and dma_iobase properties now obsolete so they can be removed. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Gabriel Somlo <somlo@cmu.edu>
2017-06-28vmstate: error hint for failed equal checksHalil Pasic
In some cases a failing VMSTATE_*_EQUAL does not mean we detected a bug, but it's actually the best we can do. Especially in these cases a verbose error message is required. Let's introduce infrastructure for specifying a error hint to be used if equal check fails. Let's do this by adding a parameter to the _EQUAL macros called _err_hint. Also change all current users to pass NULL as last parameter so nothing changes for them. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Message-Id: <20170623144823.42936-1-pasic@linux.vnet.ibm.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-06-06spapr_nvram: Check return value from blk_getlength()Peter Maydell
The blk_getlength() function can return an error value if the image size cannot be determined. Check for this rather than ploughing on and trying to g_malloc0() a negative number. (Spotted by Coverity, CID 1288484.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-28hw/block: Request permissionsKevin Wolf
This makes all device emulations with a qdev drive property request permissions on their BlockBackend. The only thing we block at this point is resizing images for some devices that can't support it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-13migration: consolidate VMStateField.startHalil Pasic
The member VMStateField.start is used for two things, partial data migration for VBUFFER data (basically provide migration for a sub-buffer) and for locating next in QTAILQ. The implementation of the VBUFFER feature is broken when VMSTATE_ALLOC is used. This however goes unnoticed because actually partial migration for VBUFFER is not used at all. Let's consolidate the usage of VMStateField.start by removing support for partial migration for VBUFFER. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Message-Id: <20170203175217.45562-1-pasic@linux.vnet.ibm.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-24migration: extend VMStateInfoJianjun Duan
Current migration code cannot handle some data structures such as QTAILQ in qemu/queue.h. Here we extend the signatures of put/get in VMStateInfo so that customized handling is supported. put now will return int type. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com> Message-Id: <1484852453-12728-2-git-send-email-duanj@linux.vnet.ibm.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-18fw-cfg: bump "x-file-slots" to 0x20 for 2.9+ machine typesLaszlo Ersek
More precisely, the "x-file-slots" count is bumped for all machine types that: (a) use fw_cfg, and (b) are not versioned (hence migration is not expected to work for them across QEMU releases anyway), or have version 2.9. This affects machine types implemented in the following source files: - "hw/arm/virt.c". The "virt-*" machine type is versioned, and the <= 2.8 versions already depend on HW_COMPAT_2_8 (see commit e353aac51b944). Therefore adding the "x-file-slots" compat values to HW_COMPAT_2_8 suffices. - "hw/i386/pc.c". The "pc-i440fx-*" (including "pc-*") and "pc-q35-*" machine types are versioned. Modifying HW_COMPAT_2_8 is sufficient here too (see commit "pc: Add 2.9 machine-types"). The "isapc" machtype is not versioned. The "xenfv" machine type, which uses fw_cfg for direct kernel booting, is also not versioned. - "hw/ppc/mac_newworld.c". The "mac99" machine type is not versioned. - "hw/ppc/mac_oldworld.c". The "g3beige" machine type is not versioned. - "hw/sparc/sun4m.c". None of the 9 machine types defined in this file appear versioned. - "hw/sparc64/sun4u.c". None of the 3 machine types defined in this file appear versioned. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Alexander Graf <agraf@suse.de> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Artyom Tarasenko <atar4qemu@gmail.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-18fw-cfg: turn FW_CFG_FILE_SLOTS into a device propertyLaszlo Ersek
We'd like to raise the value of FW_CFG_FILE_SLOTS. Doing it naively could lead to problems with backward migration: a more recent QEMU (running an older machine type) would allow the guest, in fw_cfg_select(), to select a high key value that is unavailable in the same machine type implemented by the older (target) QEMU. On the target host, fw_cfg_data_read() for example could dereference nonexistent entries. As first step, size the FWCfgState.entries[*] and FWCfgState.entry_order arrays dynamically. All three array sizes will be influenced by the new field FWCfgState.file_slots (and matching device property). Make the following changes: - Replace the FW_CFG_FILE_SLOTS macro with FW_CFG_FILE_SLOTS_MIN (minimum count of fw_cfg file slots) in the header file. The value remains 0x10. - Replace all uses of FW_CFG_FILE_SLOTS with a helper function called fw_cfg_file_slots(), returning the new property. - Eliminate the macro FW_CFG_MAX_ENTRY, and replace all its uses with a helper function called fw_cfg_max_entry(). - In the MMIO- and IO-mapped realize functions both, allocate all three arrays dynamically, based on the new property. - The new property defaults to FW_CFG_FILE_SLOTS_MIN. This is going to be customized in the following patches. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-18fw-cfg: support writeable blobsMichael S. Tsirkin
Useful to send guest data back to QEMU. Changes from Laszlo Ersek <lersek@redhat.com>: - rebase the patch from Michael Tsirkin's original postings at [1] and [2] to the following patches: - loader: Allow a custom AddressSpace when loading ROMs - loader: Add AddressSpace loading support to uImages - loader: fix handling of custom address spaces when adding ROM blobs - reject such writes immediately that would exceed the end of the array, rather than performing a partial write before setting the error bit: see the (len != dma.length) condition - document the write interface [1] http://lists.nongnu.org/archive/html/qemu-devel/2016-02/msg04968.html [2] http://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg02735.html Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Michael Walle <michael@walle.cc> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Shannon Zhao <zhaoshenglong@huawei.com> Cc: qemu-arm@nongnu.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2016-11-16fw_cfg: move FW_CFG_NB_CPUS out of fw_cfg_init1()Igor Mammedov
PC will use this field in other way, so move it outside the common code so PC could set a different value, i.e. all CPUs regardless of where they are coming from (-smp X | -device cpu...). It's quick and dirty hack as it could be implemented in more generic way in MashineClass. But do it in simple way since only PC is affected so far. Later we can generalize it when another affected target gets support for -device cpu. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1479212236-183810-3-git-send-email-imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-31Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into ↵Peter Maydell
staging trivial patches for 2016-10-28 # gpg: Signature made Fri 28 Oct 2016 16:17:51 BST # gpg: using RSA key 0x701B4F6B1A693E59 # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" # Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 # Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59 * remotes/mjt/tags/trivial-patches-fetch: (23 commits) Fix build for less common build directories names clean-up: removed duplicate #includes scripts/clean-includes: added duplicate #include check monitor: deprecate 'default' option qemu-ga: Remove stray 'q' in documentation Makefile: Fix help text for target 'installer' s390: avoid always-true comparison in s390_pci_generate_fid() migration: Remove unneeded NULL check from migrate_fd_error() scripts/hxtool: fix undefined behavour of echo qemu-options.hx: set: fix copy-paste error usb: Change *_exitfn return type from int to void MAINTAINERS: qemu-trivial information colo-compare: remove unused struct CompareChardevProps and 'props' variable milkymist-pfpu: fix potential integer overflow hw/block/nvme: Simplify if-statements a little bit target-lm32: rewrite gen_compare() lm32: milkymist-tmu2: fix integer overflow target-lm32: disable asm logging via LOG_DIS() target-lm32: swap operand of wcsr in LOG_DIS() target-lm32: fix LOG_DIS operand order ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28clean-up: removed duplicate #includesAnand J
Some files contain multiple #includes of the same header file. Removed most of those unnecessary duplicate entries using scripts/clean-includes. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Anand J <anand.indukala@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-28spapr_nvram: Pre-initialize the NVRAM to support the -prom-env parameterThomas Huth
In case we do not load the NVRAM contents from a file and the user specified the "-prom-env" parameter, use the new CHRP NVRAM helper functions to pre-initialize the NVRAM partitions, so that the SLOF firmware now can pick up the environment variables from the -prom-env parameter, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-28nvram: Move the remaining CHRP NVRAM related code to chrp_nvram.[ch]Thomas Huth
Everything that is related to CHRP NVRAM should rather reside in chrp_nvram.c / chrp_nvram.h instead of openbios_firmware_abi.h. Signed-off-by: Thomas Huth <thuth@redhat.com> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-28nvram: Introduce helper functions for CHRP "system" and "free space" partitionsThomas Huth
The "system partition" and "free space" partition layouts are defined by the CHRP and LoPAPR specification, and used by OpenBIOS and SLOF. We can re-use this code for other machines that use OpenBIOS and SLOF, too. So let's make this code independent from the MAC NVRAM environment and put it into two proper helper functions. Signed-off-by: Thomas Huth <thuth@redhat.com> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-09-23vl: Switch qemu_uuid to QemuUUIDFam Zheng
Update all qemu_uuid users as well, especially get rid of the duplicated low level g_strdup_printf, sscanf and snprintf calls with QEMU UUID API. Since qemu_uuid_parse is quite tangled with qemu_uuid, its switching to QemuUUID is done here too to keep everything in sync and avoid code churn. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-Id: <1474432046-325-10-git-send-email-famz@redhat.com>
2016-09-15fw_cfg: remove useless castsLaurent Vivier
This patch is the result of coccinelle script scripts/coccinelle/typecast.cocci CC: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-08-12trace-events: fix first line comment in trace-eventsLaurent Vivier
Documentation is docs/tracing.txt instead of docs/trace-events.txt. find . -name trace-events -exec \ sed -i "s?See docs/trace-events.txt for syntax documentation.?See docs/tracing.txt for syntax documentation.?" \ {} \; Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-id: 1470669081-17860-1-git-send-email-lvivier@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-08-08error: Strip trailing '\n' from error string arguments (again)Markus Armbruster
Commit 9af9e0f, 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they keep coming back. checkpatch.pl tries to flag them since commit 5d596c2, but it's not very good at it. Offenders tracked down with Coccinelle script scripts/coccinelle/err-bad-newline.cocci, an updated version of the script from commit 312fd5f. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1470224274-31522-2-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-08-03fw_cfg: Make base type "fw_cfg" abstractMarkus Armbruster
Missed when commit 5712db6 split off "fw_cfg_io" and "fw_cfg_mem". Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1469777353-9383-1-git-send-email-armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-25spapr: fix spapr-nvram migrationlvivier@redhat.com
When spapr-nvram is backed by a file using pflash interface, migration fails on the destination guest with assert: bdrv_co_pwritev: Assertion `!(bs->open_flags & 0x0800)' failed. This avoids the problem by delaying the pflash update until after the device loads complete. This fix is similar to the one for the pflash_cfi01 migration: 90c647d Fix pflash migration Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-07-14Add optionrom compatible with fw_cfg DMA versionMarc Marí
This optionrom is based on linuxboot.S. Signed-off-by: Marc Marí <markmb@redhat.com> Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Message-Id: <1464027093-24073-2-git-send-email-rjones@redhat.com> [Add -fno-toplevel-reorder, support clang without -m16. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-20trace: split out trace events for hw/nvram/ directoryDaniel P. Berrange
Move all trace-events for files in the hw/nvram/ directory to their own file. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1466066426-16657-17-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-07fw_cfg: follow CODING_STYLECao jin
Replace tab with 4 spaces; brace the indented statement. Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-20vl: Replace DT_NOGRAPHIC with machine optionEduardo Habkost
All DisplayType values are just UI options that don't affect any hardware emulation code, except for DT_NOGRAPHIC. Replace DT_NOGRAPHIC with DT_NONE plus a new "-machine graphics=on|off" option, so hardware emulation code don't need to use the display_type variable. Cc: Michael Walle <michael@walle.cc> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-05-12block: Allow BDRV_REQ_FUA through blk_pwrite()Eric Blake
We have several block drivers that understand BDRV_REQ_FUA, and emulate it in the block layer for the rest by a full flush. But without a way to actually request BDRV_REQ_FUA during a pass-through blk_pwrite(), FUA-aware block drivers like NBD are forced to repeat the emulation logic of a full flush regardless of whether the backend they are writing to could do it more efficiently. This patch just wires up a flags argument; followup patches will actually make use of it in the NBD driver and in qemu-io. Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-04-07Sort the fw_cfg file listGerd Hoffmann
Entries are inserted in filename order instead of being appended to the end in case sorting is enabled. This will avoid any future issues of moving the file creation around, it doesn't matter what order they are created now, the will always be in filename order. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Added machine type handling for compatibility. This was a fairly complex change, this will preserve the order of fw_cfg for older versions no matter what order the firmware files actually come in. A list is kept of the correct legacy order and the entries will be inserted based upon their order in the list. Except that some entries are ordered (in a specific area of the list) based upon what order they appear on the command line. Special handling is added for those entries. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22hw: explicitly include qemu-common.h and cpu.hPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-08fw_cfg: expose control register size in fw_cfg.hGabriel L. Somlo
Expose the size of the control register (FW_CFG_CTL_SIZE) in fw_cfg.h. Add comment to fw_cfg_io_realize() pointing out that since the 8-bit data register is always subsumed by the 16-bit control register in the port I/O case, we use the control register width as the *total* width of the (classic, non-DMA) port I/O region reserved for the device. Cc: Marc Marí <markmb@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Marc Marí <markmb@redhat.com> Message-id: 1455906029-25565-2-git-send-email-somlo@cmu.edu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-02-26fw_cfg: unbreak migration compatibility for 2.4 and earlier machinesLaszlo Ersek
When I reviewed Marc's fw_cfg DMA patches, I completely missed that the way we set dma_enabled would break migration. Gerd explained the right way (see reference below): dma_enabled should be set to true by default, and only true->false transitions should be possible: - when the user requests that with -global fw_cfg_mem.dma_enabled=off or -global fw_cfg_io.dma_enabled=off as appropriate for the platform, - when HW_COMPAT_2_4 dictates it, - when board code initializes fw_cfg without requesting DMA support. Cc: Marc Marí <markmb@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Alexandre DERUMIER <aderumier@odiso.com> Cc: qemu-stable@nongnu.org Ref: http://thread.gmane.org/gmane.comp.emulators.qemu/390272/focus=391042 Ref: https://bugs.launchpad.net/qemu/+bug/1536487 Suggested-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1455823860-22268-1-git-send-email-lersek@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-02-17hw: fix some debug message format stringsAlyssa Milburn
Signed-off-by: Alyssa Milburn <fuzzie@fuzzie.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-01-29hw: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-38-git-send-email-peter.maydell@linaro.org
2016-01-29ppc: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-6-git-send-email-peter.maydell@linaro.org
2015-12-15fw_cfg: replace ioport data read with generic methodGabriel L. Somlo
IOPort read access is limited to one byte at a time by fw_cfg_comb_valid(). As such, fw_cfg_comb_read() may safely ignore its size argument (which will always be 1), and simply call its fw_cfg_read() helper function once, returning 8 bits via the least significant byte of a 64-bit return value. This patch replaces fw_cfg_comb_read() with the generic method fw_cfg_data_read(), and removes the unused fw_cfg_read() helper. When called with size = 1, fw_cfg_data_read() acts exactly like fw_cfg_read(), performing the same set of sanity checks, and executing the while loop at most once (subject to the current read offset being within range). Cc: Laszlo Ersek <lersek@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Marc Marí <markmb@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Message-id: 1446733972-1602-7-git-send-email-somlo@cmu.edu Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-12-15fw_cfg: add generic non-DMA read methodGabriel L. Somlo
Introduce fw_cfg_data_read(), a generic read method which works on all access widths (1 through 8 bytes, inclusive), and can be used during both IOPort and MMIO read accesses. To maintain legibility, only fw_cfg_data_mem_read() (the MMIO data read method) is replaced by this patch. The new method essentially unwinds the fw_cfg_data_mem_read() + fw_cfg_read() combo, but without unnecessarily repeating all the validity checks performed by the latter on each byte being read. This patch also modifies the trace_fw_cfg_read prototype to accept a 64-bit value argument, allowing it to work properly with the new read method, but also remain backward compatible with existing call sites. Cc: Laszlo Ersek <lersek@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Marc Marí <markmb@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1446733972-1602-6-git-send-email-somlo@cmu.edu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-12-15fw_cfg: avoid calculating invalid current entry pointerGabriel L. Somlo
When calculating a pointer to the currently selected fw_cfg item, the following is used: FWCfgEntry *e = &s->entries[arch][s->cur_entry & FW_CFG_ENTRY_MASK]; When s->cur_entry is FW_CFG_INVALID, we are calculating the address of a non-existent element in s->entries[arch][...], which is undefined. This patch ensures the resulting entry pointer is set to NULL whenever s->cur_entry is FW_CFG_INVALID. Reported-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Message-id: 1446733972-1602-5-git-send-email-somlo@cmu.edu Cc: Marc Marí <markmb@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-12-15fw_cfg: remove offset argument from callback prototypeGabriel L. Somlo
Read callbacks are now only invoked at item selection, before any data is read. As such, the value of the offset argument passed to the callback will always be 0. Also, the two callback instances currently in use both leave their offset argument unused. This patch removes the offset argument from the fw_cfg read callback prototype, and from the currently available instances. The unused (write) callback prototype is also removed (write support was removed earlier, in commit 023e3148). Cc: Laszlo Ersek <lersek@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Marc Marí <markmb@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1446733972-1602-4-git-send-email-somlo@cmu.edu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-12-15fw_cfg: amend callback behavior spec to once per selectGabriel L. Somlo
Currently, the fw_cfg internal API specifies that if an item was set up with a read callback, the callback must be run each time a byte is read from the item. This behavior is both wasteful (most items do not have a read callback set), and impractical for bulk transfers (e.g., DMA read). At the time of this writing, the only items configured with a callback are "/etc/table-loader", "/etc/acpi/tables", and "/etc/acpi/rsdp". They all share the same callback functions: virt_acpi_build_update() on ARM (in hw/arm/virt-acpi-build.c), and acpi_build_update() on i386 (in hw/i386/acpi.c). Both of these callbacks are one-shot (i.e. they return without doing anything at all after the first time they are invoked with a given build_state; since build_state is also shared across all three items mentioned above, the callback only ever runs *once*, the first time either of the listed items is read). This patch amends the specification for fw_cfg_add_file_callback() to state that any available read callback will only be invoked once each time the item is selected. This change has no practical effect on the current behavior of QEMU, and it enables us to significantly optimize the behavior of fw_cfg reads during guest firmware setup, eliminating a large amount of redundant callback checks and invocations. Cc: Laszlo Ersek <lersek@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Marc Marí <markmb@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1446733972-1602-3-git-send-email-somlo@cmu.edu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-10-23macio-nvram: add to misc categoryLaurent Vivier
The macio nvram is a non volatile RAM, so add it the misc category. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-19fw_cfg: Define a static signature to be returned on DMA port readsKevin O'Connor
Return a static signature ("QEMU CFG") if the guest does a read to the DMA address io register. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-10-19Implement fw_cfg DMA interfaceMarc Marí
Based on the specifications on docs/specs/fw_cfg.txt This interface is an addon. The old interface can still be used as usual. Based on Gerd Hoffman's initial implementation. Signed-off-by: Marc Marí <markmb@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-09-11maint: avoid useless "if (foo) free(foo)" patternDaniel P. Berrange
The free() and g_free() functions both happily accept NULL on any platform QEMU builds on. As such putting a conditional 'if (foo)' check before calls to 'free(foo)' merely serves to bloat the lines of code. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-07-07spapr: Merge sPAPREnvironment into sPAPRMachineStateDavid Gibson
The code for -machine pseries maintains a global sPAPREnvironment structure which keeps track of general state information about the guest platform. This predates the existence of the MachineState structure, but performs basically the same function. Now that we have the generic MachineState, fold sPAPREnvironment into sPAPRMachineState, the pseries specific subclass of MachineState. This is mostly a matter of search and replace, although a few places which relied on the global spapr variable are changed to find the structure via qdev_get_machine(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-10fw_cfg: prohibit insertion of duplicate fw_cfg file namesGabriel L. Somlo
Exit with an error (instead of simply logging a trace event) whenever the same fw_cfg file name is added multiple times via one of the fw_cfg_add_file[_callback]() host-side API calls. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-10fw_cfg: prevent selector key conflictGabriel L. Somlo
Enforce a single assignment of data for each distinct selector key. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-10fw_cfg: remove support for guest-side data writesGabriel L. Somlo
From this point forward, any guest-side writes to the fw_cfg data register will be treated as no-ops. This patch also removes the unused host-side API function fw_cfg_add_callback(), which allowed the registration of a callback to be executed each time the guest completed a full overwrite of a given fw_cfg data item. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-30 23:03:42 +0000