aboutsummaryrefslogtreecommitdiff
path: root/hw/misc
AgeCommit message (Collapse)Author
2023-01-12hw/misc/sbsa_ec: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE()Philippe Mathieu-Daudé
This model was merged few days before the QOM cleanup from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible") was pulled and merged. Manually adapt. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-13-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/misc/sbsa_ec: Rename TYPE_SBSA_EC -> TYPE_SBSA_SECURE_ECPhilippe Mathieu-Daudé
The structure is named SECUREECState. Rename the type accordingly. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-12-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/arm/omap: Drop useless casts from void * to pointerPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/misc: AXP209 PMU EmulationStrahinja Jankovic
This patch adds minimal support for AXP-209 PMU. Most important is chip ID since U-Boot SPL expects version 0x1. Besides the chip ID register, reset values for two more registers used by A10 U-Boot SPL are covered. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Message-id: 20221226220303.14420-5-strahinja.p.jankovic@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/misc: Allwinner A10 DRAM Controller EmulationStrahinja Jankovic
During SPL boot several DRAM Controller registers are used. Most important registers are those related to DRAM initialization and calibration, where SPL initiates process and waits until certain bit is set/cleared. This patch adds these registers, initializes reset values from user's guide and updates state of registers as SPL expects it. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-3-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/misc: Allwinner-A10 Clock Controller Module EmulationStrahinja Jankovic
During SPL boot several Clock Controller Module (CCM) registers are read, most important are PLL and Tuning, as well as divisor registers. This patch adds these registers and initializes reset values from user's guide. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-2-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-08include/hw/pci: Split pci_device.h off pci.hMarkus Armbruster
PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the header don't actually need them. Similar structs live in their own headers: PCIBusClass and PCIBus in pci_bus.h, PCIBridge in pci_bridge.h, PCIHostBridgeClass and PCIHostState in pci_host.h, PCIExpressHost in pcie_host.h, and PCIERootPortClass, PCIEPort, and PCIESlot in pcie_port.h. Move PCIDeviceClass and PCIDeviceClass to new pci_device.h, along with the code that needs them. Adjust include directives. This also enables the next commit. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20221222100330.380143-6-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-01-06Merge tag 'pull-riscv-to-apply-20230106' of ↵Peter Maydell
https://github.com/alistair23/qemu into staging First RISC-V PR for QEMU 8.0 * Fix PMP propagation for tlb * Collection of bug fixes * Bump the OpenTitan supported version * Add smstateen support * Support native debug icount trigger * Remove the redundant ipi-id property in the virt machine * Support cache-related PMU events in virtual mode * Add some missing PolarFire SoC io regions * Fix mret exception cause when no pmp rule is configured * Fix bug where disabling compressed instructions would crash QEMU * Add Zawrs ISA extension support * A range of code refactoring and cleanups # gpg: Signature made Fri 06 Jan 2023 00:47:23 GMT # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * tag 'pull-riscv-to-apply-20230106' of https://github.com/alistair23/qemu: (43 commits) hw/intc: sifive_plic: Fix the pending register range check hw/riscv: opentitan: Drop "hartid-base" and "priority-base" initialization hw/intc: sifive_plic: Change "priority-base" to start from interrupt source 0 hw/riscv: virt: Fix the value of "riscv, ndev" in the dtb hw/riscv: sifive_u: Avoid using magic number for "riscv, ndev" hw/riscv: sifive_e: Fix the number of interrupt sources of PLIC hw/riscv: microchip_pfsoc: Fix the number of interrupt sources of PLIC hw/intc: sifive_plic: Update "num-sources" property default value hw/intc: sifive_plic: Use error_setg() to propagate the error up via errp in sifive_plic_realize() hw/intc: sifive_plic: Improve robustness of the PLIC config parser hw/intc: sifive_plic: Drop PLICMode_H hw/riscv: spike: Remove misleading comments hw/riscv: Sort machines Kconfig options in alphabetical order hw/riscv: Fix opentitan dependency to SIFIVE_PLIC hw/intc: Select MSI_NONBROKEN in RISC-V AIA interrupt controllers hw/riscv: Select MSI_NONBROKEN in SIFIVE_PLIC RISC-V: Add Zawrs ISA extension support target/riscv: Clear mstatus.MPRV when leaving M-mode for priv spec 1.12+ target/riscv: Simplify helper_sret() a little bit target/riscv: Set pc_succ_insn for !rvc illegal insn ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-06hw/{misc, riscv}: pfsoc: add system controller as unimplementedConor Dooley
The system controller on PolarFire SoC is access via a mailbox. The control registers for this mailbox lie in the "IOSCB" region & the interrupt is cleared via write to the "SYSREG" region. It also has a QSPI controller, usually connected to a flash chip, that is used for storing FPGA bitstreams and used for In-Application Programming (IAP). Linux has an implementation of the system controller, through which the hwrng is accessed, leading to load/store access faults. Add the QSPI as unimplemented and a very basic (effectively unimplemented) version of the system controller's mailbox. Rather than purely marking the regions as unimplemented, service the mailbox requests by reporting failures and raising the interrupt so a guest can better handle the lack of support. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221117225518.4102575-4-conor@kernel.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/misc: pfsoc: add fabric clocks to ioscbConor Dooley
On PolarFire SoC, some peripherals (eg the PCI root port) are clocked by "Clock Conditioning Circuitry" in the FPGA. The specific clock depends on the FPGA bitstream & can be locked to one particular {D,P}LL - in the Icicle Kit Reference Design v2022.09 or later this is/will be the case. Linux v6.1+ will have a driver for this peripheral and devicetrees that previously relied on "fixed-frequency" clock nodes have been switched over to clock-controller nodes. The IOSCB region is represented in QEMU, but the specific region of it that the CCCs occupy has not so v6.1-rcN kernels fail to boot in QEMU. Add the regions as unimplemented so that the status-quo in terms of boot is maintained. Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Message-Id: <20221117225518.4102575-2-conor@kernel.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-05i.MX6UL: Add a specific GPT timer instance for the i.MX6ULJean-Christophe Dubois
The i.MX6UL doesn't support CLK_HIGH ou CLK_HIGH_DIV clock source. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05i.MX7D: Compute clock frequency for the fixed frequency clocks.Jean-Christophe Dubois
CCM derived clocks will have to be added later. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-16hw/misc: Convert TYPE_MOS6522 subclasses to 3-phase resetPeter Maydell
Convert the various subclasses of TYPE_MOS6522 to 3-phase reset. This removes some uses of device_class_set_parent_reset(), which we would eventually like to be able to get rid of. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221110143459.3833425-3-peter.maydell@linaro.org
2022-12-16hw/misc/mos6522: Convert TYPE_MOS6522 to 3-phase resetPeter Maydell
Convert the TYPE_MOS6522 parent class to use 3-phase reset. This is a prerequisite for converting its subclasses. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221110143459.3833425-2-peter.maydell@linaro.org
2022-12-15hw/misc: Move some arm-related files from specific_ss into softmmu_ssThomas Huth
The header target/arm/kvm-consts.h checks CONFIG_KVM which is marked as poisoned in common code, so the files that include this header have to be added to specific_ss and recompiled for each, qemu-system-arm and qemu-system-aarch64. However, since the kvm headers are only optionally used in kvm-constants.h for some sanity checks, we can additionally check the NEED_CPU_H macro first to avoid the poisoned CONFIG_KVM macro, so kvm-constants.h can also be used from "common" files (without the sanity checks - which should be OK since they are still done from other target-specific files instead). This way, and by adjusting some other include statements in the related files here and there, we can move some files from specific_ss into softmmu_ss, so that they only need to be compiled once during the build process. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221202154023.293614-1-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-10-31mac_nvram: Use NVRAM_SIZE constantBALATON Zoltan
The NVRAM_SIZE constant was defined but not used. Rename it to MACIO_NVRAM_SIZE to match the device model and use it where appropriate. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <5b53c70438dfb46837af8a094e753706b06c4ec6.1666957578.git.balaton@eik.bme.hu> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-10-31hw/ppc/mac.h: Rename to include/hw/nvram/mac_nvram.hBALATON Zoltan
All that is left in mac.h now belongs to the nvram emulation so rename it accordingly and only include it where it is really used. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <b82449369f718c0e207fe8c332fab550fa0230c0.1666957578.git.balaton@eik.bme.hu> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-10-31hw/ppc/mac.h: Move macio specific parts out from shared headerBALATON Zoltan
Move the parts specific to and only used by macio out from the shared mac.h into macio.c where they better belong. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <ac570ce9dcbae169310503689053807b8b4b86bc.1666957578.git.balaton@eik.bme.hu> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-10-22Drop useless casts from g_malloc() & friends to pointerMarkus Armbruster
These memory allocation functions return void *, and casting to another pointer type is useless clutter. Drop these casts. If you really want another pointer type, consider g_new(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20220923120025.448759-3-armbru@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-10-06monitor: expose monitor_puts to rest of codeAlex Bennée
This helps us construct strings elsewhere before echoing to the monitor. It avoids having to jump through hoops like: monitor_printf(mon, "%s", s->str); It will be useful in following patches but for now convert all existing plain "%s" printfs to use the _puts api. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220929114231.583801-33-alex.bennee@linaro.org>
2022-09-14hw/arm/bcm2835_property: Add support for ↵Enrik Berkhan
RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS In more recent Raspbian OS Linux kernels, the fb driver gives up immediately if RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS fails or no displays are reported. This change simply always reports one display. It makes bcm2835_fb work again with these more recent kernels. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Enrik Berkhan <Enrik.Berkhan@inka.de> Message-Id: <20220812143519.59134-1-Enrik.Berkhan@inka.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-08-08hw/misc/grlib_ahb_apb_pnp: Support 8 and 16 bit accessesPeter Maydell
In real hardware, the APB and AHB PNP data tables can be accessed with byte and halfword reads as well as word reads. Our implementation currently only handles word reads. Add support for the 8 and 16 bit accesses. Note that we only need to handle aligned accesses -- unaligned accesses should continue to trap, as happens on hardware. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1132 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Frederic Konrad <fkonrad@amd.com> Message-Id: <20220802131925.3380923-1-peter.maydell@linaro.org> Tested-by: Tomasz Martyniak <gitlab.com/tom4r> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-08-01trivial: Fix duplicated wordsThomas Huth
Some files wrongly contain the same word twice in a row. One of them should be removed or replaced. Message-Id: <20220722145859.1952732-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-08-01misc: fix commonly doubled up wordsDaniel P. Berrangé
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20220707163720.1421716-5-berrange@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-14aspeed: sbc: Allow per-machine settingsJoel Stanley
In order to correctly report secure boot running firmware the values of certain registers must be set. We don't yet have documentation from ASPEED on what they mean. The meaning is inferred from u-boot's use of them. Introduce properties so the settings can be configured per-machine. Reviewed-by: Peter Delevoryas <pdel@fb.com> Tested-by: Peter Delevoryas <pdel@fb.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-Id: <20220628154740.1117349-4-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-07-12block: Change blk_{pread,pwrite}() param orderAlberto Faria
Swap 'buf' and 'bytes' around for consistency with blk_co_{pread,pwrite}(), and in preparation to implement these functions using generated_co_wrapper. Callers were updated using this Coccinelle script: @@ expression blk, offset, buf, bytes, flags; @@ - blk_pread(blk, offset, buf, bytes, flags) + blk_pread(blk, offset, bytes, buf, flags) @@ expression blk, offset, buf, bytes, flags; @@ - blk_pwrite(blk, offset, buf, bytes, flags) + blk_pwrite(blk, offset, bytes, buf, flags) It had no effect on hw/block/nand.c, presumably due to the #if, so that file was updated manually. Overly-long lines were then fixed by hand. Signed-off-by: Alberto Faria <afaria@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220705161527.1054072-4-afaria@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-07-12block: Add a 'flags' param to blk_pread()Alberto Faria
For consistency with other I/O functions, and in preparation to implement it using generated_co_wrapper. Callers were updated using this Coccinelle script: @@ expression blk, offset, buf, bytes; @@ - blk_pread(blk, offset, buf, bytes) + blk_pread(blk, offset, buf, bytes, 0) It had no effect on hw/block/nand.c, presumably due to the #if, so that file was updated manually. Overly-long lines were then fixed by hand. Signed-off-by: Alberto Faria <afaria@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220705161527.1054072-3-afaria@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-07-12block: Make blk_{pread,pwrite}() return 0 on successAlberto Faria
They currently return the value of their 'bytes' parameter on success. Make them return 0 instead, for consistency with other I/O functions and in preparation to implement them using generated_co_wrapper. This also makes it clear that short reads/writes are not possible. Signed-off-by: Alberto Faria <afaria@redhat.com> Message-Id: <20220705161527.1054072-2-afaria@redhat.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-06-30hw/misc/aspeed: Add PECI controllerPeter Delevoryas
This introduces a really basic PECI controller that responses to commands by always setting the response code to success and then raising an interrupt to indicate the command is done. This helps avoid getting hit with constant errors if the driver continuously attempts to send a command and keeps timing out. The AST2400 and AST2500 only included registers up to 0x5C, not 0xFC. They supported PECI 1.1, 2.0, and 3.0. The AST2600 and AST1030 support PECI 4.0, which includes more read/write buffer registers from 0x80 to 0xFC to support 64-byte mode. This patch doesn't attempt to handle that, or to create a different version of the controller for the different generations, since it's only implementing functionality that is common to all generations. The basic sequence of events is that the firmware will read and write to various registers and then trigger a command by setting the FIRE bit in the command register (similar to the I2C controller). Then the firmware waits for an interrupt from the PECI controller, expecting the interrupt status register to be filled in with info on what happened. If the command was transmitted and received successfully, then response codes from the host CPU will be found in the data buffer registers. Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220630045133.32251-12-me@pjd.dev> [ clg: s/sysbus_mmio_map/aspeed_mmio_map/ ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30aspeed/hace: Accumulative mode supportedJoel Stanley
While the HMAC mode is not modelled, the accumulative mode is. Accumulative mode is enabled by setting one of the bits in the HMAC engine command mode part of the register, so fix the unimplemented check to only look at the upper of the two bits. Fixes: 5cd7d8564a8b ("aspeed/hace: Support AST2600 HACE") Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220627100816.125956-1-joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30aspeed/scu: Add trace events for read opsCédric Le Goater
Reviewed-by: Peter Delevoryas <pdel@fb.com> Message-Id: <20220628154740.1117349-2-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-22aspeed/hace: Add missing newlines to unimp messagesJoel Stanley
Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-09acpi: pvpanic-isa: use AcpiDevAmlIfClass:build_dev_aml to provide device's AMLIgor Mammedov
.. and clean up not longer needed conditionals in DSTD build code pvpanic-isa AML will be fetched and included when ISA bridge will build its own AML code (including attached devices). Expected AML change: the device under separate _SB.PCI0.ISA scope is moved directly under Device(ISA) node. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20220608135340.3304695-29-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09acpi: applesmc: use AcpiDevAmlIfClass:build_dev_aml to provide device's AMLIgor Mammedov
.. and clean up not longer needed conditionals in DSTD build code. applesmc AML will be fetched and included when ISA bridge will build its own AML code (incl. attached devices). Expected AML change: the device under separate _SB.PCI0.ISA scope is moved directly under Device(ISA) node. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20220608135340.3304695-25-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-08lasi: move from hw/hppa to hw/miscMark Cave-Ayland
Move the LASI device implementation from hw/hppa to hw/misc so that it is located with all the other miscellaneous devices. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220504092600.10048-43-mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-05-03Merge tag 'misc-pull-request' of gitlab.com:marcandre.lureau/qemu into stagingRichard Henderson
Misc cleanups # -----BEGIN PGP SIGNATURE----- # # iQJQBAABCAA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAmJxKjQcHG1hcmNhbmRy # ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5ZD5D/9f5CGbNsrl7kB1t6iS # 1ABr5AeW0g9sidMCsQAe9xhWl6+R2SO/z0bBue+mv1ltG0RSZ1ZXS4FyJFBAhFfR # fZ6J7bvdnawIKOxu5T9NY/UvthdRV0eC8CTo0q6GAJo9MHyIGvo1TOoM2Ld9QpfB # 2uup+9fw3Clh0HSHwV9LSL7v2nucFef4A5P1CJ6d1KHnnej0hfug5o+Aiy+wDLA2 # 5RnTm44dqm9lzTgt/x4MqE6Us7WWQukjlLny8/gyurNTR+6fxLqjsHZG+6woQETu # Gg6angsOoAFyciFZ564rjGv80qQuccMVMjtrKvBZz/cmwUUz+Lb4tU3tUPBqomGX # wiofVtL4qcXs94OHWX654UX/iXgkRqC3r+aC0xT37cL4svC8N69BhilxI5+gIGxZ # ZjaQhHx/0e+Ut3c+xrjYHbywQMd9L9AhRyYSMz5BNeLg9+yUiMR+hvGVR/SubLN1 # iiLS07CRgdOKdP6ts7CC7txAgDw4h3cPN5Hz+gqXMJTcnBKpXpnF1lL+Zd/J5++N # 8qMVQH5O4REQRISsbKaOPW8PCiPESsUaHb/mWkre7iYLgkEdNMVQvRcnfx14ejbk # /KKXolrG1huJXGQGnYvgJArHMBBL+ieIYiT6alKFNRNECLdioL46FuSOlirHVCGe # StU22Vsl61M8ifDOPdolK55X5Q== # =npwd # -----END PGP SIGNATURE----- # gpg: Signature made Tue 03 May 2022 06:12:20 AM PDT # gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5 # gpg: issuer "marcandre.lureau@redhat.com" # gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full] # gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full] * tag 'misc-pull-request' of gitlab.com:marcandre.lureau/qemu: (23 commits) util: rename qemu_*block() socket functions tests: replace qemu_set_nonblock() net: replace qemu_set_nonblock() ui: replace qemu_set_nonblock() hw: replace qemu_set_nonblock() qga: replace qemu_set_nonblock() io: replace qemu_set{_non}block() chardev: replace qemu_set_nonblock() io: make qio_channel_command_new_pid() static Replace fcntl(O_NONBLOCK) with g_unix_set_fd_nonblocking() io: replace pipe() with g_unix_open_pipe(CLOEXEC) virtiofsd: replace pipe() with g_unix_open_pipe(CLOEXEC) os-posix: replace pipe()+cloexec with g_unix_open_pipe(CLOEXEC) tests: replace pipe() with g_unix_open_pipe(CLOEXEC) qga: replace pipe() with g_unix_open_pipe(CLOEXEC) util: replace pipe()+cloexec with g_unix_open_pipe() Replace qemu_pipe() with g_unix_open_pipe() block: move fcntl_setfl() Use g_unix_set_fd_nonblocking() libqtest: split QMP part in libqmp ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-05-03Use g_unix_set_fd_nonblocking()Marc-André Lureau
API available since glib 2.30. It also preserves errno. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-05-03aspeed/hace: Support AST1030 HACESteven Lee
Per ast1030_v7.pdf, AST1030 HACE engine is identical to AST2600's HACE engine. Signed-off-by: Steven Lee <steven_lee@aspeedtech.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-02aspeed/hace: Support AST2600 HACESteven Lee
The aspeed ast2600 accumulative mode is described in datasheet ast2600v10.pdf section 25.6.4: 1. Allocating and initiating accumulative hash digest write buffer with initial state. * Since QEMU crypto/hash api doesn't provide the API to set initial state of hash library, and the initial state is already set by crypto library (gcrypt/glib/...), so skip this step. 2. Calculating accumulative hash digest. (a) When receiving the last accumulative data, software need to add padding message at the end of the accumulative data. Padding message described in specific of MD5, SHA-1, SHA224, SHA256, SHA512, SHA512/224, SHA512/256. * Since the crypto library (gcrypt/glib) already pad the padding message internally. * This patch is to remove the padding message which fed byguest machine driver. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Signed-off-by: Steven Lee <steven_lee@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220426021120.28255-3-steven_lee@aspeedtech.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-02aspeed/hace: Support HMAC Key Buffer register.Steven Lee
Support HACE28: Hash HMAC Key Buffer Base Address Register. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Signed-off-by: Steven Lee <steven_lee@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220426021120.28255-2-steven_lee@aspeedtech.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-02aspeed/scu: Add AST1030 supportSteven Lee
Per ast1030_v07.pdf, AST1030 SOC doesn't have SCU300, the pclk divider selection is defined in SCU310[11:8]. Add a get_apb_freq function and a class init handler for ast1030. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Signed-off-by: Steven Lee <steven_lee@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220401083850.15266-7-jamin_lin@aspeedtech.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-02aspeed: sbc: Correct default reset valuesJoel Stanley
In order to correctly report secure boot running firmware, these values must be set. They are taken from a running machine when secure boot is enabled. We don't yet have documentation from ASPEED on what they mean. Set the raw values for now, and in the future improve the model with properties to set these on a per-machine basis. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220310052159.183975-1-joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-02hw: aspeed_scu: Introduce clkin_25Mhz attributeSteven Lee
AST2600 clkin is always 25MHz, introduce clkin_25Mhz attribute for aspeed_scu_get_clkin() to return the correct clkin for ast2600. Signed-off-by: Steven Lee <steven_lee@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220315075753.8591-3-steven_lee@aspeedtech.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-02hw: aspeed_scu: Add AST2600 apb_freq and hpll calculation functionSteven Lee
AST2600's HPLL register offset and bit definition are different from AST2500. Add a hpll calculation function and an apb frequency calculation function based on SCU200 register description in ast2600v11.pdf. Signed-off-by: Steven Lee <steven_lee@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> [ clg: checkpatch fixes ] Message-Id: <20220315075753.8591-2-steven_lee@aspeedtech.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-04-21Merge tag 'misc-pull-request' of gitlab.com:marcandre.lureau/qemu into stagingRichard Henderson
Misc cleanups # -----BEGIN PGP SIGNATURE----- # # iQJQBAABCAA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAmJhYIscHG1hcmNhbmRy # ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5W0jD/43n8PL2cv42lq6OaIS # OYN9vfW9xgA9THZiUH4xEHYreZh+KofmY1PbJn1n7q+v6DecBiqM4fZr1LY8X3PM # xRUH0l4gjXwYwX2cSSo5UTZ/PF248Uoo3tUE3vgMFkYghHMjKcTtaSkYEPGHf2nR # t3m1qLG9w9YPhVg7PNCntjUKi+w2TtcrRVzP7V7XyFc1HrAoT0ys6KaBBrXMbcjz # SxTRbcwSq+6aPjQIn0RWp8Hp1HkdNjegB98dkyqRLlVaugHZWPYDXDQTgVziQlX8 # dU8YrlvTOtDWwsNP6awWnW6/IjKuJjGR0wT3QKwi8JAZ0YV3egwEKoQRUAyHtnn2 # FkSMYgmJcF0ai1aIJFAx+3PIzCfS49lKXA0t303DtY3hRR9JKGMwaV2do9Wm2irt # o7T1lKKN7R7R8Q3U4OsatYMYm7KYL07NEDiQCPloGvCo27ezkAWCKXAw1mRUkxKF # jKwJPcnOUq21Jp6tpjsR8ifSw70jBSEWQSGqhXnDhZhx2C2/Qqkg2I8DagLiPger # kYxbQ13LTG0R25YHa1r3UmzuD+HpZOM8XoLJc5yun/1UrwyR9ghHrOoxkSnRT2Ks # QFn//xQ2SzUnGBNzNSMfTk8vzludxSWfFnOjkviF6E2Elnw3p8f/kOQRAft5dMBY # ftgoy2yLone3HpKfjuOriicIzg== # =0GLo # -----END PGP SIGNATURE----- # gpg: Signature made Thu 21 Apr 2022 06:47:55 AM PDT # gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5 # gpg: issuer "marcandre.lureau@redhat.com" # gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full] # gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full] * tag 'misc-pull-request' of gitlab.com:marcandre.lureau/qemu: (30 commits) qga: use fixed-length and GDateTime for log timestamp tests/fuzz: fix warning qga: remove need for QEMU atomic.h util: replace qemu_get_local_state_pathname() util: use qemu_create() in qemu_write_pidfile() util: use qemu_write_full() in qemu_write_pidfile() util: simplify write in signal handler qtest: simplify socket_send() qga: move qga_get_host_name() Move error_printf_unless_qmp() with monitor unit tests: run-time skip test-qga if TSAN is enabled compiler.h: add QEMU_SANITIZE_{ADDRESS,THREAD} tests: remove block/qdict checks from check-qobject.c include: move qdict_{crumple,flatten} declarations include: add qemu/keyval.h include: move qemu_fdatasync() to osdep include: move qemu_msync() to osdep compiler.h: replace QEMU_NORETURN with G_NORETURN osdep.h: move qemu_build_not_reached() doc/style: CLang -> Clang ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-04-21compiler.h: replace QEMU_NORETURN with G_NORETURNMarc-André Lureau
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in glib-compat. Note that this attribute must be placed before the function declaration (bringing a bit of consistency in qemu codebase usage). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Warner Losh <imp@bsdimp.com> Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
2022-04-21hw/misc: Add a model of the Xilinx Versal CRLEdgar E. Iglesias
Add a model of the Xilinx Versal CRL. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Frederic Konrad <fkonrad@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20220406174303.2022038-4-edgar.iglesias@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-04-06Remove qemu-common.h include from most unitsMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-24hw: Fix misleading hexadecimal formatPhilippe Mathieu-Daudé
"0x%u" format is very misleading, replace by "0x%x". Found running: $ git grep -E '0x%[0-9]*([lL]*|" ?PRI)[dDuU]' hw/ Inspired-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20220323114718.58714-3-philippe.mathieu.daude@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-03-21Use g_new() & friends where that makes obvious senseMarkus Armbruster
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer, for two reasons. One, it catches multiplication overflowing size_t. Two, it returns T * rather than void *, which lets the compiler catch more type errors. This commit only touches allocations with size arguments of the form sizeof(T). Patch created mechanically with: $ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \ --macro-file scripts/cocci-macro-file.h FILES... Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20220315144156.1595462-4-armbru@redhat.com> Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-01 23:46:53 +0000