aboutsummaryrefslogtreecommitdiff
path: root/hw/mem
AgeCommit message (Collapse)Author
2020-07-10error: Eliminate error_propagate() with Coccinelle, part 1Markus Armbruster
When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-10error: Avoid unnecessary error_propagate() after error_setg()Markus Armbruster
Replace error_setg(&err, ...); error_propagate(errp, err); by error_setg(errp, ...); Related pattern: if (...) { error_setg(&err, ...); goto out; } ... out: error_propagate(errp, err); return; When all paths to label out are that way, replace by if (...) { error_setg(errp, ...); return; } and delete the label along with the error_propagate(). When we have at most one other path that actually needs to propagate, and maybe one at the end that where propagation is unnecessary, e.g. foo(..., &err); if (err) { goto out; } ... bar(..., &err); out: error_propagate(errp, err); return; move the error_propagate() to where it's needed, like if (...) { foo(..., &err); error_propagate(errp, err); return; } ... bar(..., errp); return; and transform the error_setg() as above. In some places, the transformation results in obviously unnecessary error_propagate(). The next few commits will eliminate them. Bonus: the elimination of gotos will make later patches in this series easier to review. Candidates for conversion tracked down with this Coccinelle script: @@ identifier err, errp; expression list args; @@ - error_setg(&err, args); + error_setg(errp, args); ... when != err error_propagate(errp, err); Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-34-armbru@redhat.com>
2020-07-10qom: Put name parameter before value / visitor parameterMarkus Armbruster
The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-10qapi: Use returned bool to check for failure, manual partMarkus Armbruster
The previous commit used Coccinelle to convert from checking the Error object to checking the return value. Convert a few more manually. Also tweak control flow in places to conform to the conventional "if error bail out" pattern. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-20-armbru@redhat.com>
2020-07-10qapi: Use returned bool to check for failure, Coccinelle partMarkus Armbruster
The previous commit enables conversion of visit_foo(..., &err); if (err) { ... } to if (!visit_foo(..., errp)) { ... } for visitor functions that now return true / false on success / error. Coccinelle script: @@ identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*"; expression list args; typedef Error; Error *err; @@ - fun(args, &err); - if (err) + if (!fun(args, &err)) { ... } A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-19-armbru@redhat.com>
2020-05-27nvdimm: Plug memory leak in uuid property setterMarkus Armbruster
nvdimm_set_uuid() leaks memory on qemu_uuid_parse() failure. Fix that. Fixes: 6c5627bb24dcd68c997857a8b671617333b1289f Cc: Xiao Guangrong <xiaoguangrong.eric@gmail.com> Cc: Shivaprasad G Bhat <sbhat@linux.ibm.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200505101908.6207-2-armbru@redhat.com> Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Reviewed-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
2020-05-15qdev: Unrealize must not failMarkus Armbruster
Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-05-15qom: Drop parameter @errp of object_property_add() & friendsMarkus Armbruster
The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-5.1-pull-request' into staging trivial patches (20200504) Silent static analyzer warning Remove dead assignments Support -chardev serial on macOS Update MAINTAINERS Some cosmetic changes # gpg: Signature made Mon 04 May 2020 16:45:18 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.1-pull-request: hw/timer/pxa2xx_timer: Add assertion to silent static analyzer warning hw/timer/stm32f2xx_timer: Remove dead assignment hw/gpio/aspeed_gpio: Remove dead assignment hw/isa/i82378: Remove dead assignment hw/ide/sii3112: Remove dead assignment hw/input/adb-kbd: Remove dead assignment hw/i2c/pm_smbus: Remove dead assignment blockdev: Remove dead assignment block: Avoid dead assignment Compress lines for immediate return chardev: Add macOS to list of OSes that support -chardev serial MAINTAINERS: Update Keith Busch's email address elf_ops: Don't try to g_mapped_file_unref(NULL) hw/mem/pc-dimm: Fix line over 80 characters warning hw/mem/pc-dimm: Print slot number on error at pc_dimm_pre_plug() MAINTAINERS: Mark the LatticeMico32 target as orphan timer/exynos4210_mct: Remove redundant statement in exynos4210_mct_write() display/blizzard: use extract16() for fix clang analyzer warning in blizzard_draw_line16_32() scsi/esp-pci: add g_assert() for fix clang analyzer warning in esp_pci_io_write() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-04hw/arm/virt: Add nvdimm hot-plug infrastructureKwangwoo Lee
This adds support to init nvdimm acpi state and build nvdimm acpi tables. Please note nvdimm_support is not yet enabled. Signed-off-by: Kwangwoo Lee <kwangwoo.lee@sk.com> Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200421125934.14952-4-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-04hw/mem/pc-dimm: Fix line over 80 characters warningWainer dos Santos Moschetta
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20200310180510.19489-3-wainersm@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-05-04hw/mem/pc-dimm: Print slot number on error at pc_dimm_pre_plug()Wainer dos Santos Moschetta
The error report in pc_dimm_pre_plug() now has the slot number printed. Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20200310180510.19489-2-wainersm@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-02-21spapr: Add NVDIMM device supportShivaprasad G Bhat
Add support for NVDIMM devices for sPAPR. Piggyback on existing nvdimm device interface in QEMU to support virtual NVDIMM devices for Power. Create the required DT entries for the device (some entries have dummy values right now). The patch creates the required DT node and sends a hotplug interrupt to the guest. Guest is expected to undertake the normal DR resource add path in response and start issuing PAPR SCM hcalls. The device support is verified based on the machine version unlike x86. This is how it can be used .. Ex : For coldplug, the device to be added in qemu command line as shown below -object memory-backend-file,id=memnvdimm0,prealloc=yes,mem-path=/tmp/nvdimm0,share=yes,size=1073872896 -device nvdimm,label-size=128k,uuid=75a3cdd7-6a2f-4791-8d15-fe0a920e8e9e,memdev=memnvdimm0,id=nvdimm0,slot=0 For hotplug, the device to be added from monitor as below object_add memory-backend-file,id=memnvdimm0,prealloc=yes,mem-path=/tmp/nvdimm0,share=yes,size=1073872896 device_add nvdimm,label-size=128k,uuid=75a3cdd7-6a2f-4791-8d15-fe0a920e8e9e,memdev=memnvdimm0,id=nvdimm0,slot=0 Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> [Early implementation] Message-Id: <158131058078.2897.12767731856697459923.stgit@lep8c.aus.stglabs.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-02-21nvdimm: add uuid property to nvdimmShivaprasad G Bhat
For ppc64, PAPR requires the nvdimm device to have UUID property set in the device tree. Add an option to get it from the user. Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <158131056931.2897.14057087440721445976.stgit@lep8c.aus.stglabs.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-18memory-device: Fix memory pre-plug error API violationsMarkus Armbruster
memory_device_get_free_addr() dereferences @errp when memory_device_check_addable() fails. That's wrong; see the big comment in error.h. Introduced in commit 1b6d6af21b "pc-dimm: factor out capacity and slot checks into MemoryDevice". No caller actually passes null. Fix anyway: splice in a local Error *err, and error_propagate(). Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20191204093625.14836-11-armbru@redhat.com>
2019-10-22memory-device: simplify Makefile.objs conditionsPaolo Bonzini
hw/mem/ is only included if CONFIG_MEM_DEVICE is true, so we need not specify the condition again in hw/mem/Makefile.objs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-15memory-device: break the loop if tmp exceed the hinted rangeWei Yang
The memory-device list built by memory_device_build_list is ordered by its address, this means if the tmp range exceed the hinted range, all the following range will not overlap with it. And this won't change default pc-dimm mapping and address assignment stay the same as before this change. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Message-Id: <20190730003740.20694-3-richardw.yang@linux.intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-10-15memory-device: not necessary to use goto for the last checkWei Yang
We are already at the last condition check. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20190730003740.20694-2-richardw.yang@linux.intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-09-03numa: move numa global variable nb_numa_nodes into MachineStateTao Xu
Add struct NumaState in MachineState and move existing numa global nb_numa_nodes(renamed as "num_nodes") into NumaState. And add variable numa_support into MachineClass to decide which submachines support NUMA. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20190809065731.9097-3-tao3.xu@intel.com> [ehabkost: include hw/boards.h again to fix build failures] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-08-16numa: Move remaining NUMA declarations from sysemu.h to numa.hMarkus Armbruster
Commit e35704ba9c "numa: Move NUMA declarations from sysemu.h to numa.h" left a few NUMA-related macros behind. Move them now. Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-26-armbru@redhat.com>
2019-08-16Include sysemu/hostmem.h lessMarkus Armbruster
Move the HostMemoryBackend typedef from sysemu/hostmem.h to qemu/typedefs.h. This renders a few inclusions of sysemu/hostmem.h superfluous; drop them. Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-25-armbru@redhat.com>
2019-08-16numa: Don't include hw/boards.h into sysemu/numa.hMarkus Armbruster
sysemu/numa.h includes hw/boards.h just for the CPUArchId typedef, at the cost of pulling in more than two dozen extra headers indirectly. I could move the typedef from hw/boards.h to qemu/typedefs.h. But it's used in just two headers: boards.h and numa.h. I could move it to another header both its users include. exec/cpu-common.h seems to be the least bad fit. But I'm keeping this simple & stupid: declare the struct tag in numa.h. Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-24-armbru@redhat.com>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include migration/vmstate.h lessMarkus Armbruster
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-29pc-dimm: fix crash when invalid slot number is usedIgor Mammedov
QEMU will crash with: Segmentation fault (core dumped) when negative slot number is used, ex: qemu-system-x86_64 -m 1G,maxmem=20G,slots=256 \ -object memory-backend-ram,id=mem1,size=1G \ -device pc-dimm,id=dimm1,memdev=mem1,slot=-2 fix it by checking that slot number is within valid range. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190723160859.27250-1-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Igor Mammedov &lt;<a href="mailto:imammedo@redhat.com" target="_blank">imammedo@redhat.com</a>&gt;<br></blockquote><div><br></div><div>Reviewed-by: Li Qiang &lt;<a href="mailto:liq3ea@gmail.com">liq3ea@gmail.com</a>&gt;<br></div><div> </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"> Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-03-22trace-events: Shorten file names in commentsMarkus Armbruster
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to source files. That's because when trace-events got split up, the comments were moved verbatim. Delete the sub/dir/ part from these comments. Gets rid of several misspellings. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-3-armbru@redhat.com Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-07ppc64: Express dependencies of 'pseries' and 'powernv' machines with kconfigThomas Huth
The POWERNV switch should always select ISA_IPMI_BT, then the other IPMI options are turned on automatically now. CONFIG_DIMM should always be selected by the pseries machine, which in turn depends on CONFIG_MEM_DEVICE since DIMM implements this interface. CONFIG_VIRTIO_VGA can be dropped from default-configs/ppc64-softmmu.mak completely since this device is already automatically enabled via hw/display/Kconfig now. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07i386-softmmu.mak: remove all CONFIG_* except boards definitionsYang Zhong
%-softmmu.mak only keep boards definitions in Kconfig mode. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-43-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07kconfig: introduce kconfig filesPaolo Bonzini
The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-21pc-dimm: use same mechanism for [get|set]_addrWei Yang
[get|set]_addr are two counterpart to access PCDIMMDevice.addr. Since we have already set up a property PC_DIMM_ADDR_PROP for this field and use this mechanism in set_addr, it would be more proper to use the same mechanism in get_addr. This patch uses object_property_get_uint() to replace the direct memory access to make [get|set]_addr with the same mechanism. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Message-Id: <20190211064629.20186-1-richardw.yang@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-09memory-device: rewrite address assignment using rangesDavid Hildenbrand
Let's rewrite it properly using ranges. This fixes certain overflows that are right now possible. E.g. qemu-system-x86_64 -m 4G,slots=20,maxmem=40G -M pc \ -object memory-backend-file,id=mem1,share,mem-path=/dev/zero,size=2G -device pc-dimm,memdev=mem1,id=dimm1,addr=-0x40000000 Now properly errors out instead of succeeding. (Note that qapi parsing of huge uint64_t values is broken and fixes are on the way) "can't add memory device [0xffffffffa0000000:0x80000000], usable range for memory devices [0x140000000:0xe00000000]" Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181214131043.25071-3-david@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-12-11memory-device: avoid overflows on very huge devicesDavid Hildenbrand
Should not be a problem right now, but it could theoretically happen in the future. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181023152306.3123-7-david@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-12-11memory-device: use QEMU_IS_ALIGNEDDavid Hildenbrand
Shorter and easier to read. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181023152306.3123-6-david@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-11-06nvdimm: set non-volatile on the memory regionMarc-André Lureau
qemu-system-x86_64 -machine pc,nvdimm -m 2G,slots=4,maxmem=16G -enable-kvm -monitor stdio -object memory-backend-file,id=mem1,share=on,mem-path=/tmp/foo,size=1G -device nvdimm,id=nvdimm1,memdev=mem1 HMP info mtree command reflects the flag with "nv-" prefix on memory type: (qemu) info mtree 0000000100000000-000000013fffffff (prio 0, nv-i/o): alias nvdimm-memory @/objects/mem1 0000000000000000-000000003fffffff (qemu) info mtree -f 0000000100000000-000000013fffffff (prio 0, nv-ram): /objects/mem1 Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20181003114454.5662-3-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-24memory-device: trace when pre_plugging/plugging/unpluggingDavid Hildenbrand
Let's trace the address and the id of a memory device when pre_plugging/plugging/unplugging succeeded. Trace it when pre_plugging as well as when plugging, so we really know when a specific address is actually used. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181005092024.14344-17-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24memory-device: complete factoring out unplug handlingDavid Hildenbrand
With the new memory device functions in place, we can factor out unplugging of memory devices completely. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181005092024.14344-16-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24memory-device: complete factoring out plug handlingDavid Hildenbrand
With the new memory device functions in place, we can factor out plugging of memory devices completely. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181005092024.14344-15-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24memory-device: complete factoring out pre_plug handlingDavid Hildenbrand
With all required memory device class functions in place, we can factor out pre_plug handling of memory devices. Take proper care of errors. We still have to carry along legacy_align required for pc compatibility handling. We will factor out tracing of the address separately in a follow-up patch. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181005092024.14344-14-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24memory-device: add device class function set_addr()David Hildenbrand
To be able to factor out address assignment of memory devices, we will have to read (get_addr()) and write (set_addr()) the address. We can't use properties for this purpose, as properties are device specific. E.g. while the address property for a DIMM is called "addr", it might be called differently (e.g. "memaddr") for other devices. Especially virtio based memory devices cannot use "addr" as that is already reserved and used for the address on the bus (for the proxy device). Also, it might be possible to have memory devices without address properties (e.g. internal DIMM-like thingies). In contrast to get_addr(), we expect that set_addr() can fail. Keep it simple for now for pc-dimm and simply set the static property, that will fail once realized. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181005092024.14344-13-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24memory-device: drop get_region_size()David Hildenbrand
There are no remaining users of get_region_size() except memory_device_get_region_size() itself. We can make memory_device_get_region_size() work directly on get_memory_region() instead and drop get_region_size(). In addition, we can now use memory_device_get_region_size() in pc-dimm code to implement get_plugged_size()" Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181005092024.14344-12-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24memory-device: factor out get_memory_region() from pc-dimmDavid Hildenbrand
The memory region is necessary for plugging/unplugging a memory device. The region size (via get_region_size()) is no longer sufficient, as besides the alignment, also the region itself is required in order to add it to the device memory region of the machine via - memory_region_add_subregion - memory_region_del_subregion So, to factor out plugging/unplugging of memory devices from pc-dimm code, we have to factor out access to the memory region first. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181005092024.14344-11-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24memory-device: add and use memory_device_get_region_size()David Hildenbrand
We will factor out get_memory_region() from pc-dimm to memory device code soon. Once that is done, get_region_size() can be implemented generically and essentially be replaced by memory_device_get_region_size (and work only on get_memory_region()). We have some users of get_memory_region() (spapr and pc-dimm code) that are only interested in the size. So let's rework them to use memory_device_get_region_size() first, then we can factor out get_memory_region() and eventually remove get_region_size() without touching the same code multiple times. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181005092024.14344-10-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24memory-device: forward errors in get_region_size()/get_plugged_size()David Hildenbrand
Let's properly forward the errors, so errors from get_region_size() / get_plugged_size() can be handled. Users right now call both functions after the device has been realized, which is will never fail, so it is fine to continue using error_abort. While at it, remove a leftover error check (suggested by Igor). Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181005092024.14344-8-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24memory-device: introduce separate config optionDavid Hildenbrand
Some architectures might support memory devices, while they don't support DIMM/NVDIMM. So let's - Rename CONFIG_MEM_HOTPLUG to CONFIG_MEM_DEVICE - Introduce CONFIG_DIMM and use it similarly to CONFIG NVDIMM CONFIG_DIMM and CONFIG_NVDIMM require CONFIG_MEM_DEVICE. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181005092024.14344-7-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24memory-device: use memory device terminology in error messagesDavid Hildenbrand
While we rephrased most error messages, we missed these. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181005092024.14344-6-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24pc-dimm: pass PCDIMMDevice to pc_dimm_.*plugDavid Hildenbrand
We're plugging/unplugging a PCDIMMDevice, so directly pass this type instead of a more generic DeviceState. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181005092024.14344-5-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24memory-device: improve "range conflicts" error messageDavid Hildenbrand
Handle id==NULL better and indicate that we are dealing with memory devices. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181005092024.14344-4-david@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-24memory-device: fix error message when hinted address is too smallDavid Hildenbrand
The "at" should actually be a "before". if (new_addr < address_space_start) -> "can't add memory ... before... $address_space_start" So it looks similar to the other check } else if ((new_addr + size) > address_space_end) -> "can't add memory ... beyond..." Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181005092024.14344-3-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-23 15:05:50 +0000