aboutsummaryrefslogtreecommitdiff
path: root/hw/isa-bus.c
AgeCommit message (Collapse)Author
2012-10-23Rename target_phys_addr_t to hwaddrAvi Kivity
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-06isa: add a isa_vga_init() functionAurelien Jarno
This function create a ISA VGA device according to the value of vga_interface_type. It returns a ISADevice (and not a DeviceState). Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-05scsi, pci, qdev, isa-bus, sysbus: don't let *_get_fw_dev_path return NULLJim Meyering
Use g_strdup rather than strdup, because the sole caller (qdev_get_fw_dev_path_helper) assumes it gets non-NULL, and dereferences it. Besides, in that caller, the allocated buffer is already freed with g_free, so it's better to allocate with a matching g_strdup. In one case, (scsi-bus.c) it was trivial, so I replaced an snprintf+ g_strdup combination with an equivalent g_strdup_printf use. Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-18qdev: Convert busses to QEMU Object ModelAnthony Liguori
This is far less interesting than it sounds. We simply add an Object to each BusState and then register the types appropriately. Most of the interesting refactoring will follow in the next patches. Since we're changing fundamental type names (BusInfo -> BusClass), it all needs to convert at once. Fortunately, not a lot of code is affected. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [AF: Made all new bus TypeInfos static const.] [AF: Made qbus_free() call object_delete(), required {qom,glib}_allocated] Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-02-15qom: Unify type registrationAndreas Färber
Replace device_init() with generalized type_init(). While at it, unify naming convention: type_init([$prefix_]register_types) Also, type_init() is a function, so add preceding blank line where necessary and don't put a semicolon after the closing brace. Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: malc <av1474@comtv.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-03qdev: kill off DeviceInfoAnthony Liguori
It is no longer used in the tree since everything is done natively through QEMU Object Model. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-03qdev: register all types natively through QEMU Object ModelAnthony Liguori
This was done in a mostly automated fashion. I did it in three steps and then rebased it into a single step which avoids repeatedly touching every file in the tree. The first step was a sed-based addition of the parent type to the subclass registration functions. The second step was another sed-based removal of subclass registration functions while also adding virtual functions from the base class into a class_init function as appropriate. Finally, a python script was used to convert the DeviceInfo structures and qdev_register_subclass functions to TypeInfo structures, class_init functions, and type_register_static calls. We are almost fully converted to QOM after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27sysbus: apic: ioapic: convert to QEMU Object ModelAnthony Liguori
This converts three devices because apic and ioapic are subclasses of sysbus. Converting subclasses independently of their base class is prohibitively hard. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27isa: pic: convert to QEMU Object ModelAnthony Liguori
This converts two devices at once because PIC subclasses ISA and converting subclasses independently is extremely hard. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-20isa: always use provided ISA bus in isa_bus_irqs()Hervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-20isa: always use provided ISA bus when creating an isa deviceHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-20isa: move ISABus structure definition to header fileHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-20isa: give ISABus/ISADevice to isa_create(), isa_bus_irqs() and isa_get_irq() ↵Hervé Poussineau
functions NULL is a valid bus/device, so there is no change in behaviour. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-11isa: Remove isa_init_ioport_range and isa_init_ioportRichard Henderson
All users have been converted to either isa_register_ioport or isa_register_old_portio_list. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11isa: Add isa_register_portio_list()Avi Kivity
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-10isa: Tidy support code for isabus_get_fw_dev_pathRichard Henderson
The only user of ISADevice.ioports is isabus_get_fw_dev_path, and it only looks at the first entry of the array. Which suggests that this entire array+sort operation can be replaced by a simple minimum. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25isa: add isa_register_ioport()Richard Henderson
To replace isa_init_ioport and isa_init_ioport_range as the ISA devices are converted to the memory api. [avi: use memory_region_size()] Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25isa: Pass i/o address space to isa_bus_newRichard Henderson
Not used yet, but at least we're provided with the correct region. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-08-22isa: add isa_address_space()Avi Kivity
A helper that returns the address space used by ISA devices. Useful for getting rid of isa_mem_base, multiple ISA buses, or ISA buses behind bridges. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-04-15Remove unused sysemu.h include directivesBlue Swirl
Remove unused sysemu.h include directives to speed up build with the following patches. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-21isa-bus: Remove bogus IRQ sharing checkJan Kiszka
Nothing prevented IRQ sharing on the ISA bus in principle. Not all boards supported this, neither each and every card nor driver and OS. Still, there existed valid IRQ sharing scenarios, (at least) two of them can also be found in QEMU: >2 PC UARTs and the PREP IDE buses. So remove this artificial restriction from our ISA model. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-12isa: add creation function that may failBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Add get_fw_dev_path callback to ISA bus in qdev.Gleb Natapov
Use device ioports to create unique device path. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Keep track of ISA ports ISA device is using in qdev.Gleb Natapov
Store all io ports used by device in ISADevice structure. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Introduce fw_name field to DeviceInfo structure.Gleb Natapov
Add "fw_name" to DeviceInfo to use in device path building. In contrast to "name" "fw_name" should refer to functionality device provides instead of particular device model like "name" does. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11isa-bus.c: use hw_error instead of fprintfTristan Gingold
Minor clean-up in isa-bus.c. Using hw_error is more consistent. There is a difference however: hw_error dumps the cpu state. Signed-off-by: Tristan Gingold <gingold@adacore.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-09move two variable declarations out of vl.cPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-07Make isa_create() terminate program on failureMarkus Armbruster
Callers don't check the return value anyway. Patchworks-ID: 35172 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-07New qdev_init_nofail()Markus Armbruster
Like qdev_init(), but terminate program via hw_error() instead of returning an error value. Use it instead of qdev_init() where terminating the program on failure is okay, either because it's during machine construction, or because we know that failure can't happen. Because relying in the latter is somewhat unclean, and the former is not always obvious, it would be nice to go back to qdev_init() in the not-so-obvious cases, only with proper error handling. I'm leaving that for another day, because it involves making sure that error values are properly checked by all callers. Patchworks-ID: 35168 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-07Make qdev_init() destroy the device on failureMarkus Armbruster
Before, every caller had to do this. Only two actually did. Patchworks-ID: 35170 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-10qdev: add isa_create() functionGerd Hoffmann
Like isa_create_simple, but doesn't call qdev_init, so one can set properties after creating and before initializing the device. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-09-10qdev: tag isabus-bridge as no-userGerd Hoffmann
isabus-bridge isn't supposed to be added via -device ... Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-09-10qdev: simplify isa irq assignmentsGerd Hoffmann
isa-bus owns the isa irqs now, so it can hand them out directly. There is no need for the separate isa_connect_irqs step, drop it. Also hard-code isa interrupts which can't be configured anyway. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-09-10qdev: drop iobase properties from isa busGerd Hoffmann
Lot of ISA devices work at fixed addresses, so having iobase as bus property doesn't make much sense. Devices which can have different iobases will get a device property. Also simply hard-code stuff which can't be configured anyway. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-08-28Suppress kraxelismsBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-27qdev: add return value to init() callbacks.Gerd Hoffmann
Sorry folks, but it has to be. One more of these invasive qdev patches. We have a serious design bug in the qdev interface: device init callbacks can't signal failure because the init() callback has no return value. This patch fixes it. We have already one case in-tree where this is needed: Try -device virtio-blk-pci (without drive= specified) and watch qemu segfault. This patch fixes it. With usb+scsi being converted to qdev we'll get more devices where the init callback can fail for various reasons. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Move isa_connect_irq calls into isa_create_simpleGerd Hoffmann
Now with isa-bus maintaining the isa irqs we can move the isa_connect_irq() calls into isa_create_simple(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Add isa_reserve_irq().Jes Sorensen
Introduce isa_reserve_irq() which marks an irq reserved and returns the appropriate qemu_irq entry from the i8259 table. isa_reserve_irq() is a temporary interface to be used to allocate ISA IRQs for devices which have not yet been converted to qdev, and for special cases which are not suited for qdev conversions, such as the 'ferr'. This patch goes on top of Gerd Hoffmann's which makes isa-bus.c own the ISA irq table. [ added isa-bus.o to some targets to fix build failures -- kraxel ] Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27isa bus irq changes and fixes.Gerd Hoffmann
Changes: (1) make isa-bus maintain isa irqs, complain when allocating already taken irqs. (2) note that (1) works only for isa devices converted to qdev already (floppy and ps2/kbd/mouse right now), so more work is needed to make this really useful. (3) split floppy init into isa and sysbus versions. (4) add sysbus->isa bridge & fix -M isapc breakage. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-24qdev/prop: convert isa-bus to helper macros.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-10qdev/isa: add isa bus support to qdev.Gerd Hoffmann
Pretty simple and straigt forward. IRQs modeled simliar to sysbus. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-01 12:18:29 +0000