aboutsummaryrefslogtreecommitdiff
path: root/hw/hyperv
AgeCommit message (Collapse)Author
2021-09-30qbus: Rename qbus_create() to qbus_new()Peter Maydell
Rename the "allocate and return" qbus creation function to qbus_new(), to bring it into line with our _init vs _new convention. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Message-id: 20210923121153.23754-6-peter.maydell@linaro.org
2021-07-06vmbus: Don't make QOM property registration conditionalEduardo Habkost
Having properties registered conditionally makes QOM type introspection difficult. Instead of skipping registration of the "instanceid" property, always register the property but validate its value against the instance id required by the class. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <20201009200701.1830060-1-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-18qdev: Move softmmu properties to qdev-properties-system.hEduardo Habkost
Move the property types and property macros implemented in qdev-properties-system.c to a new qdev-properties-system.h header. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-23qemu/atomic.h: rename atomic_ to qatomic_Stefan Hajnoczi
clang's C11 atomic_fetch_*() functions only take a C11 atomic type pointer argument. QEMU uses direct types (int, etc) and this causes a compiler error when a QEMU code calls these functions in a source file that also included <stdatomic.h> via a system header file: $ CC=clang CXX=clang++ ./configure ... && make ../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid) Avoid using atomic_*() names in QEMU's atomic.h since that namespace is used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h and <stdatomic.h> can co-exist. I checked /usr/include on my machine and searched GitHub for existing "qatomic_" users but there seem to be none. This patch was generated using: $ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \ sort -u >/tmp/changed_identifiers $ for identifier in $(</tmp/changed_identifiers); do sed -i "s%\<$identifier\>%q$identifier%g" \ $(git grep -I -l "\<$identifier\>") done I manually fixed line-wrap issues and misaligned rST tables. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-12Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging trivial patches pull request 20200911 # gpg: Signature made Fri 11 Sep 2020 20:32:27 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.2-pull-request: target/i386/kvm: Add missing fallthrough comment util/hexdump: Reorder qemu_hexdump() arguments util/hexdump: Convert to take a void pointer argument hw/arm/pxa2xx: Add missing fallthrough comment target/i386/kvm: Rename host_tsx_blacklisted() as host_tsx_broken() test-vmstate: remove unnecessary code in match_interval_mapping_node hw: hyperv: vmbus: Fix 32bit compilation kconfig: fix comment referring to old Makefiles meson.build: tweak sdl-image error message hw/net/e1000e: Remove duplicated write handler for FLSWDATA register hw/net/e1000e: Remove overwritten read handler for STATUS register Makefile: Skip the meson subdir in cscope/TAGS/ctags Makefile: Drop extra phony cscope hw/gpio/max7310: Replace disabled printf() by qemu_log_mask(UNIMP) hw/gpio/omap_gpio: Replace fprintf() by qemu_log_mask(GUEST_ERROR) hw/acpi/tco: Remove unused definitions hw/isa/isa-bus: Replace hw_error() by assert() hw/mips/fuloong2e: Convert pointless error message to an assert() Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # net/colo-compare.c
2020-09-11Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost/tags/machine-next-pull-request' into staging QOM boilerplate cleanup Documentation build fix: * memory: Remove kernel-doc comment marker (Eduardo Habkost) QOM cleanups: * Rename QOM macros for consistency between TYPE_* and type checking constants (Eduardo Habkost) QOM new macros: * OBJECT_DECLARE_* and OBJECT_DEFINE_* macros (Daniel P. Berrangé) * DECLARE_*_CHECKER macros (Eduardo Habkost) Automated QOM boilerplate changes: * Automated changes to use DECLARE_*_CHECKER (Eduardo Habkost * Automated changes to use OBJECT_DECLARE* (Eduardo Habkost) # gpg: Signature made Thu 10 Sep 2020 19:17:49 BST # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: (33 commits) virtio-vga: Use typedef name for instance_size vhost-user-vga: Use typedef name for instance_size xilinx_axienet: Use typedef name for instance_size lpc_ich9: Use typedef name for instance_size omap_intc: Use typedef name for instance_size xilinx_axidma: Use typedef name for instance_size tusb6010: Rename TUSB to TUSB6010 pc87312: Rename TYPE_PC87312_SUPERIO to TYPE_PC87312 vfio: Rename PCI_VFIO to VFIO_PCI usb: Rename USB_SERIAL_DEV to USB_SERIAL sabre: Rename SABRE_DEVICE to SABRE rs6000_mc: Rename RS6000MC_DEVICE to RS6000MC filter-rewriter: Rename FILTER_COLO_REWRITER to FILTER_REWRITER esp: Rename ESP_STATE to ESP ahci: Rename ICH_AHCI to ICH9_AHCI vmgenid: Rename VMGENID_DEVICE to TYPE_VMGENID vfio: Rename VFIO_AP_DEVICE_TYPE to TYPE_VFIO_AP_DEVICE dev-smartcard-reader: Rename CCID_DEV_NAME to TYPE_USB_CCID_DEV ap-device: Rename AP_DEVICE_TYPE to TYPE_AP_DEVICE gpex: Fix type checking function name ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-10hw: hyperv: vmbus: Fix 32bit compilationJon Doron
Fix 32-bit build error for vmbus: hw/hyperv/vmbus.c: In function ‘gpadl_iter_io’: hw/hyperv/vmbus.c:383:13: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 383 | p = (void *)(((uintptr_t)iter->map & TARGET_PAGE_MASK) | off_in_page); | ^ cc1: all warnings being treated as errors Fixes: 0d71f7082d7 ("vmbus: vmbus implementation") Signed-off-by: Jon Doron <arilou@gmail.com> Tested-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Message-Id: <20200715084326.678715-3-arilou@gmail.com> [lv: updated with commit description from <20200906050113.2783642-1-richard.henderson@linaro.org>] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-09trace-events: Fix attribution of trace points to sourceMarkus Armbruster
Some trace points are attributed to the wrong source file. Happens when we neglect to update trace-events for code motion, or add events in the wrong place, or misspell the file name. Clean up with help of scripts/cleanup-trace-events.pl. Funnies requiring manual post-processing: * accel/tcg/cputlb.c trace points are in trace-events. * block.c and blockdev.c trace points are in block/trace-events. * hw/block/nvme.c uses the preprocessor to hide its trace point use from cleanup-trace-events.pl. * hw/tpm/tpm_spapr.c uses pseudo trace point tpm_spapr_show_buffer to guard debug code. * include/hw/xen/xen_common.h trace points are in hw/xen/trace-events. * linux-user/trace-events abbreviates a tedious list of filenames to */signal.c. * net/colo-compare and net/filter-rewriter.c use pseudo trace points colo_compare_miscompare and colo_filter_rewriter_debug to guard debug code. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200806141334.3646302-5-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-27vmbus: Move QOM macros to vmbus.hEduardo Habkost
Move all declarations related to TYPE_VMBUS to the same place in vmbus.h. This will make future conversion to OBJECT_DECLARE* easier. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Tested-By: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200825192110.3528606-35-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-21meson: convert hw/hypervMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21trace: switch position of headers to what Meson requiresPaolo Bonzini
Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10error: Avoid unnecessary error_propagate() after error_setg()Markus Armbruster
Replace error_setg(&err, ...); error_propagate(errp, err); by error_setg(errp, ...); Related pattern: if (...) { error_setg(&err, ...); goto out; } ... out: error_propagate(errp, err); return; When all paths to label out are that way, replace by if (...) { error_setg(errp, ...); return; } and delete the label along with the error_propagate(). When we have at most one other path that actually needs to propagate, and maybe one at the end that where propagation is unnecessary, e.g. foo(..., &err); if (err) { goto out; } ... bar(..., &err); out: error_propagate(errp, err); return; move the error_propagate() to where it's needed, like if (...) { foo(..., &err); error_propagate(errp, err); return; } ... bar(..., errp); return; and transform the error_setg() as above. In some places, the transformation results in obviously unnecessary error_propagate(). The next few commits will eliminate them. Bonus: the elimination of gotos will make later patches in this series easier to review. Candidates for conversion tracked down with this Coccinelle script: @@ identifier err, errp; expression list args; @@ - error_setg(&err, args); + error_setg(errp, args); ... when != err error_propagate(errp, err); Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-34-armbru@redhat.com>
2020-06-26hyperv: vmbus: Remove the 2nd IRQJon Doron
It seems like Windows does not really require 2 IRQs to have a functioning VMBus. Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20200617160904.681845-2-arilou@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-15qdev: Convert bus-less devices to qdev_realize() with CoccinelleMarkus Armbruster
All remaining conversions to qdev_realize() are for bus-less devices. Coccinelle script: // only correct for bus-less @dev! @@ expression errp; expression dev; @@ - qdev_init_nofail(dev); + qdev_realize(dev, NULL, &error_fatal); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(dev, true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-57-armbru@redhat.com>
2020-06-10vmbus: add infrastructure to save/load vmbus requestsJon Doron
This can be allow to include controller-specific data while saving/loading in-flight scsi requests of the vmbus scsi controller. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20200424123444.3481728-7-arilou@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-10i386: Hyper-V VMBus ACPI DSDT entryJon Doron
Guest OS uses ACPI to discover VMBus presence. Add a corresponding entry to DSDT in case VMBus has been enabled. Experimentally Windows guests were found to require this entry to include two IRQ resources. They seem to never be used but they still have to be there. Make IRQ numbers user-configurable via corresponding properties; use 7 and 13 by default. Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com> Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20200424123444.3481728-6-arilou@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-10vmbus: vmbus implementationJon Doron
Add the VMBus infrastructure -- bus, devices, root bridge, vmbus state machine, vmbus channel interactions, etc. VMBus is a collection of technologies. At its lowest layer, it's a message passing and signaling mechanism, allowing efficient passing of messages to and from guest VMs. A layer higher, it's a mechanism for defining channels of communication, where each channel is tagged with a type (which implies a protocol) and a instance ID. A layer higher than that, it's a bus driver, serving as the basis of device enumeration within a VM, where a channel can optionally be exposed as a paravirtual device. When a server-side (paravirtual back-end) component wishes to offer a channel to a guest VM, it does so by specifying a channel type, a mode, and an instance ID. VMBus then exposes this in the guest. More information about VMBus can be found in the file vmbuskernelmodeclientlibapi.h in Microsoft's WDK. TODO: - split into smaller palatable pieces - more comments - check and handle corner cases Kudos to Evgeny Yakovlev (formerly eyakovlev@virtuozzo.com) and Andrey Smetatin (formerly asmetanin@virtuozzo.com) for research and prototyping. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20200424123444.3481728-4-arilou@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-10hyperv: expose API to determine if synic is enabledJon Doron
Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20200424123444.3481728-2-arilou@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-05-15qom: Drop parameter @errp of object_property_add() & friendsMarkus Armbruster
The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-04lockable: Replace locks with lock guard macrosSimran Singhal
Replace manual lock()/unlock() calls with lock guard macros (QEMU_LOCK_GUARD/WITH_QEMU_LOCK_GUARD). Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com> Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com> Tested-by: Yuval Shaia <yuval.shaia.ml@gmail.com> Message-id: 20200402065035.GA15477@simran-Inspiron-5558 Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-01-30add device_legacy_reset function to prepare for reset api changeDamien Hedde
Provide a temporary device_legacy_reset function doing what device_reset does to prepare for the transition with Resettable API. All occurrence of device_reset in the code tree are also replaced by device_legacy_reset. The new resettable API has different prototype and semantics (resetting child buses as well as the specified device). Subsequent commits will make the changeover for each call site individually; once that is complete device_legacy_reset() will be removed. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-2-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-17hyperv: Use auto rcu_read macrosDr. David Alan Gilbert
Use RCU_READ_LOCK_GUARD and WITH_RCU_READ_LOCK_GUARD to replace the manual rcu_read_(un)lock calls. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-03-07hyperv: express dependencies with kconfigYang Zhong
remove default-configs/hyperv.mak and make dependencies with Kconfig. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-41-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07kconfig: introduce kconfig filesPaolo Bonzini
The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-11-26hw/hyperv: fix NULL dereference with pure-kvm SynICRoman Kagan
When started in compat configuration of SynIC, e.g. qemu-system-x86_64 -machine pc-i440fx-2.10,accel=kvm \ -cpu host,-vmx,hv-relaxed,hv_spinlocks=0x1fff,hv-vpindex,hv-synic or explicitly qemu-system-x86_64 -enable-kvm -cpu host,hv-synic,x-hv-synic-kvm-only=on QEMU crashes in hyperv_synic_reset() trying to access the non-present qobject for SynIC. Add the missing check for NULL. Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reported-by: Igor Mammedov <imammedo@redhat.com> Fixes: 9b4cf107b09d18ac30f46fd1c4de8585ccba030c Fixes: 4a93722f9c279184e95b1e1ad775c01deec05065 Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20181126152836.25379-1-rkagan@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-19hyperv_testdev: add SynIC message and event testmodesRoman Kagan
Add testmodes for SynIC messages and events. The message or event connection setup / teardown is initiated by the guest via new control codes written to the test device port. Then the test connections bounce the respective operations back to the guest, i.e. the incoming messages are posted or the incoming events are signaled on the configured vCPUs. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: process POST_MESSAGE hypercallRoman Kagan
Add handling of POST_MESSAGE hypercall. For that, add an interface to regsiter a handler for the messages arrived from the guest on a particular connection id (IOW set up a message connection in Hyper-V speak). Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082217.29481-10-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: add support for KVM_HYPERV_EVENTFDRoman Kagan
When setting up a notifier for Hyper-V event connection, try to use the KVM-assisted one first, and fall back to userspace handling of the hypercall if the kernel doesn't provide the requested feature. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082217.29481-9-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: process SIGNAL_EVENT hypercallRoman Kagan
Add handling of SIGNAL_EVENT hypercall. For that, provide an interface to associate an EventNotifier with an event connection number, so that it's signaled when the SIGNAL_EVENT hypercall with the matching connection ID is called by the guest. Support for using KVM functionality for this will be added in a followup patch. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082217.29481-8-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: add synic event flag signalingRoman Kagan
Add infrastructure to signal SynIC event flags by atomically setting the corresponding bit in the event flags page and firing a SINT if necessary. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082217.29481-7-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: add synic message deliveryRoman Kagan
Add infrastructure to deliver SynIC messages to the SynIC message page. Note that KVM may also want to deliver (SynIC timer) messages to the same message slot. The problem is that the access to a SynIC message slot is controlled by the value of its .msg_type field which indicates if the slot is being owned by the hypervisor (zero) or by the guest (non-zero). This leaves no room for synchronizing multiple concurrent producers. The simplest way to deal with this for both KVM and QEMU is to only deliver messages in the vcpu thread. KVM already does this; this patch makes it for QEMU, too. Specifically, - add a function for posting messages, which only copies the message into the staging buffer if its free, and schedules a work on the corresponding vcpu to actually deliver it to the guest slot; - instead of a sint ack callback, set up the sint route with a message status callback. This function is called in a bh whenever there are updates to the message slot status: either the vcpu made definitive progress delivering the message from the staging buffer (succeeded or failed) or the guest issued EOM; the status is passed as an argument to the callback. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082217.29481-6-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: make overlay pages for SynICRoman Kagan
Per Hyper-V spec, SynIC message and event flag pages are to be implemented as so called overlay pages. That is, they are owned by the hypervisor and, when mapped into the guest physical address space, overlay the guest physical pages such that 1) the overlaid guest page becomes invisible to the guest CPUs until the overlay page is turned off 2) the contents of the overlay page is preserved when it's turned off and back on, even at a different address; it's only zeroed at vcpu reset This particular nature of SynIC message and event flag pages is ignored in the current code, and guest physical pages are used directly instead. This happens to (mostly) work because the actual guests seem not to depend on the features listed above. This patch implements those pages as the spec mandates. Since the extra RAM regions, which introduce migration incompatibility, are only added at SynIC object creation which only happens when hyperv_synic_kvm_only == false, no extra compat logic is necessary. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082217.29481-5-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: qom-ify SynICRoman Kagan
Make Hyper-V SynIC a device which is attached as a child to a CPU. For now it only makes SynIC visibile in the qom hierarchy, and maintains its internal fields in sync with the respecitve msrs of the parent cpu (the fields will be used in followup patches). Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082217.29481-3-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19hyperv: factor out arch-independent API into hw/hypervRoman Kagan
A significant part of hyperv.c is not actually tied to x86, and can be moved to hw/. This will allow to maintain most of Hyper-V and VMBus target-independent, and to avoid conflicts with inclusion of arch-specific headers down the road in VMBus implementation. Also this stuff can now be opt-out with CONFIG_HYPERV. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082041.29380-4-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-11 16:04:38 +0000