aboutsummaryrefslogtreecommitdiff
path: root/hw/dma
AgeCommit message (Collapse)Author
2021-10-07hw/dma: sifive_pdma: Don't run DMA when channel is disclaimedBin Meng
If Control.run bit is set while not preserving the Control.claim bit, the DMA transfer shall not be started. The following result is PDMA tested in U-Boot on Unleashed board: => mw.l 0x3000000 0x0 <= Disclaim channel 0 => mw.l 0x3000000 0x1 <= Claim channel 0 => mw.l 0x3000004 0x55000000 <= wsize = rsize = 5 (2^5 = 32 bytes) => mw.q 0x3000008 0x2 <= NextBytes = 2 => mw.q 0x3000010 0x84000000 <= NextDestination = 0x84000000 => mw.q 0x3000018 0x84001000 <= NextSource = 0x84001000 => mw.l 0x84000000 0x87654321 <= Fill test data to dst => mw.l 0x84001000 0x12345678 <= Fill test data to src => md.l 0x84000000 1; md.l 0x84001000 1 <= Dump src/dst memory contents 84000000: 87654321 !Ce. 84001000: 12345678 xV4. => md.l 0x3000000 8 <= Dump PDMA status 03000000: 00000001 55000000 00000002 00000000 .......U........ 03000010: 84000000 00000000 84001000 00000000 ................ => mw.l 0x3000000 0x2 <= Set channel 0 run bit only => md.l 0x3000000 8 <= Dump PDMA status 03000000: 00000000 55000000 00000002 00000000 .......U........ 03000010: 84000000 00000000 84001000 00000000 ................ => md.l 0x84000000 1; md.l 0x84001000 1 <= Dump src/dst memory contents 84000000: 87654321 !Ce. 84001000: 12345678 xV4. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210927072124.1564129-2-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07hw/dma: sifive_pdma: Fix Control.claim bit detectionBin Meng
At present the codes detect whether the DMA channel is claimed by: claimed = !!s->chan[ch].control & CONTROL_CLAIM; As ! has higher precedence over & (bitwise and), this is essentially claimed = (!!s->chan[ch].control) & CONTROL_CLAIM; which is wrong, as any non-zero bit set in the control register will produce a result of a claimed channel. Fixes: de7c7988d25d ("hw/dma: sifive_pdma: reset Next* registers when Control.claim is set") Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210927072124.1564129-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/dma: sifive_pdma: don't set Control.error if 0 bytes to transferFrank Chang
Real PDMA doesn't set Control.error if there are 0 bytes to be transferred. The DMA transfer is still success. The following result is PDMA tested in U-Boot on Unmatched board: => mw.l 0x3000000 0x0 <= Disclaim channel 0 => mw.l 0x3000000 0x1 <= Claim channel 0 => mw.l 0x3000004 0x55000000 <= wsize = rsize = 5 (2^5 = 32 bytes) => mw.q 0x3000008 0x0 <= NextBytes = 0 => mw.q 0x3000010 0x84000000 <= NextDestination = 0x84000000 => mw.q 0x3000018 0x84001000 <= NextSource = 0x84001000 => mw.l 0x84000000 0x87654321 <= Fill test data to dst => mw.l 0x84001000 0x12345678 <= Fill test data to src => md.l 0x84000000 1; md.l 0x84001000 1 <= Dump src/dst memory contents 84000000: 87654321 !Ce. 84001000: 12345678 xV4. => md.l 0x3000000 8 <= Dump PDMA status 03000000: 00000001 55000000 00000000 00000000 .......U........ 03000010: 84000000 00000000 84001000 00000000 ................ => mw.l 0x3000000 0x3 <= Set channel 0 run and claim bits => md.l 0x3000000 8 <= Dump PDMA status 03000000: 40000001 55000000 00000000 00000000 ...@...U........ 03000010: 84000000 00000000 84001000 00000000 ................ => md.l 0x84000000 1; md.l 0x84001000 1 <= Dump src/dst memory contents 84000000: 87654321 !Ce. 84001000: 12345678 xV4. Signed-off-by: Frank Chang <frank.chang@sifive.com> Tested-by: Max Hsu <max.hsu@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210912130553.179501-5-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/dma: sifive_pdma: allow non-multiple transaction size transactionsGreen Wan
Real PDMA is able to deal with non-multiple transaction size transactions. The following result is PDMA tested in U-Boot on Unmatched board: => mw.l 0x3000000 0x0 <= Disclaim channel 0 => mw.l 0x3000000 0x1 <= Claim channel 0 => mw.l 0x3000004 0x11000000 <= wsize = rsize = 1 (2^1 = 2 bytes) => mw.q 0x3000008 0x3 <= NextBytes = 3 => mw.q 0x3000010 0x84000000 <= NextDestination = 0x84000000 => mw.q 0x3000018 0x84001000 <= NextSource = 0x84001000 => mw.l 0x84000000 0x87654321 <= Fill test data to dst => mw.l 0x84001000 0x12345678 <= Fill test data to src => md.l 0x84000000 1; md.l 0x84001000 1 <= Dump src/dst memory contents 84000000: 87654321 !Ce. 84001000: 12345678 xV4. => md.l 0x3000000 8 <= Dump PDMA status 03000000: 00000001 11000000 00000003 00000000 ................ 03000010: 84000000 00000000 84001000 00000000 ................ => mw.l 0x3000000 0x3 <= Set channel 0 run and claim bits => md.l 0x3000000 8 <= Dump PDMA status 03000000: 40000001 11000000 00000003 00000000 ...@............ 03000010: 84000000 00000000 84001000 00000000 ................ => md.l 0x84000000 1; md.l 0x84001000 1 <= Dump src/dst memory contents 84000000: 87345678 xV4. 84001000: 12345678 xV4. Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Tested-by: Max Hsu <max.hsu@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Message-id: 20210912130553.179501-4-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/dma: sifive_pdma: claim bit must be set before DMA transactionsFrank Chang
Real PDMA must have Control.claim bit to be set before Control.run bit is set to start any DMA transactions. Otherwise nothing will be transferred. The following result is PDMA tested in U-Boot on Unmatched board: => mw.l 0x3000000 0x0 <= Disclaim channel 0 (Channel 0 is not claimed) => mw.l 0x3000004 0x55000000 <= wsize = rsize = 5 (2^5 = 32 bytes) => mw.q 0x3000008 0x2 <= NextBytes = 2 => mw.q 0x3000010 0x84000000 <= NextDestination = 0x84000000 => mw.q 0x3000018 0x84001000 <= NextSource = 0x84001000 => mw.l 0x84000000 0x87654321 <= Fill test data to dst => mw.l 0x84001000 0x12345678 <= Fill test data to src => md.l 0x84000000 1; md.l 0x84001000 1 <= Dump src/dst memory contents 84000000: 87654321 !Ce. 84001000: 12345678 xV4. => md.l 0x3000000 8 <= Dump PDMA status 03000000: 00000000 55000000 00000002 00000000 .......U........ 03000010: 84000000 00000000 84001000 00000000 ................ => mw.l 0x3000000 0x3 <= Set channel 0 run and claim bits => md.l 0x3000000 8 <= Dump PDMA status 03000000: 00000001 66000000 00000000 00000000 .......f........ 03000010: 00000000 00000000 00000000 00000000 ................ => md.l 0x84000000 1; md.l 0x84001000 1 <= Dump src/dst memory contents 84000000: 87654321 !Ce. 84001000: 12345678 xV4. Signed-off-by: Frank Chang <frank.chang@sifive.com> Tested-by: Max Hsu <max.hsu@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210912130553.179501-3-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/dma: sifive_pdma: reset Next* registers when Control.claim is setFrank Chang
Setting Control.claim clears all of the chanel's Next registers. This is effective only when Control.claim is set from 0 to 1. Signed-off-by: Frank Chang <frank.chang@sifive.com> Tested-by: Max Hsu <max.hsu@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210912130553.179501-2-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-08-26hw/dma/xlnx-zdma Always expect 'dma' link property to be setPhilippe Mathieu-Daudé
Simplify by always passing a MemoryRegion property to the device. Doing so we can move the AddressSpace field to the device struct, removing need for heap allocation. Update the Xilinx ZynqMP / Versal SoC models to pass the default system memory instead of a NULL value. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210819163422.2863447-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-08-26hw/dma/xlnx_csu_dma: Always expect 'dma' link property to be setPhilippe Mathieu-Daudé
Simplify by always passing a MemoryRegion property to the device. Doing so we can move the AddressSpace field to the device struct, removing need for heap allocation. Update the Xilinx ZynqMP SoC model to pass the default system memory instead of a NULL value. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210819163422.2863447-4-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-08-26hw/dma/xlnx_csu_dma: Run trivial checks early in realize()Philippe Mathieu-Daudé
If some property are not set, we'll return indicating a failure, so it is pointless to allocate / initialize some fields too early. Move the trivial checks earlier in realize(). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210819163422.2863447-3-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-08-25hw/dma/pl330: Add memory region to replace defaultWen, Jianxian
Add property memory region which can connect with IOMMU region to support SMMU translate. Signed-off-by: Jianxian Wen <jianxian.wen@verisilicon.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 4C23C17B8E87E74E906A25A3254A03F4FA1FEC31@SHASXM03.verisilicon.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-12Drop the deprecated unicore32 targetMarkus Armbruster
Target unicore32 was deprecated in commit 8e4ff4a8d2b, v5.2.0. See there for rationale. Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210503084034.3804963-3-armbru@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com>
2021-05-02Do not include exec/address-spaces.h if it's not really necessaryThomas Huth
Stop including exec/address-spaces.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-5-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02hw: Remove superfluous includes of hw/hw.hThomas Huth
The include/hw/hw.h header only has a prototype for hw_error(), so it does not make sense to include this in files that do not use this function. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210326151848.2217216-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02hw/arm: Constify VMStateDescriptionPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210313171150.2122409-2-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-10Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20210310' into staging target-arm queue: * Add new mps3-an547 board * target/arm: Restrict v7A TCG cpus to TCG accel * Implement a Xilinx CSU DMA model * hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt() # gpg: Signature made Wed 10 Mar 2021 13:56:20 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20210310: (54 commits) hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt() hw/timer/renesas_tmr: Prefix constants for CSS values with CSS_ hw/ssi: xilinx_spips: Remove DMA related dead codes from zynqmp_spips hw/ssi: xilinx_spips: Clean up coding convention issues hw/arm: xlnx-zynqmp: Connect a Xilinx CSU DMA module for QSPI hw/arm: xlnx-zynqmp: Clean up coding convention issues hw/dma: Implement a Xilinx CSU DMA model target/arm: Restrict v7A TCG cpus to TCG accel tests/qtest/sse-timer-test: Test counter scaling changes tests/qtest/sse-timer-test: Test the system timer tests/qtest/sse-timer-test: Add simple test of the SSE counter docs/system/arm/mps2.rst: Document the new mps3-an547 board hw/arm/mps2-tz: Add new mps3-an547 board hw/arm/mps2-tz: Make initsvtor0 setting board-specific hw/arm/mps2-tz: Support running APB peripherals on different clock hw/misc/mps2-scc: Implement changes for AN547 hw/misc/mps2-fpgaio: Support AN547 DBGCTRL register hw/misc/mps2-fpgaio: Fold counters subsection into main vmstate hw/arm/mps2-tz: Make UART overflow IRQ board-specific hw/arm/armsse: Add SSE-300 support ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-08hw/dma: Implement a Xilinx CSU DMA modelXuzhou Cheng
ZynqMP QSPI supports SPI transfer using DMA mode, but currently this is unimplemented. When QSPI is programmed to use DMA mode, QEMU will crash. This is observed when testing VxWorks 7. This adds a Xilinx CSU DMA model and the implementation is based on https://github.com/Xilinx/qemu/blob/master/hw/dma/csu_stream_dma.c. The DST part of the model is verified along with ZynqMP GQSPI model. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20210303135254.3970-2-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-07esp: rename existing ESP QOM type to SYSBUS_ESPMark Cave-Ayland
The existing ESP QOM type currently represents a sysbus device with an embedded ESP state. Rename the type to SYSBUS_ESP accordingly. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210304221103.6369-3-mark.cave-ayland@ilande.co.uk>
2021-02-03hw/arm/xlnx-versal: Versal SoC requires ZDMAPhilippe Mathieu-Daudé
The Versal SoC instantiates the TYPE_XLNX_ZDMA object in versal_create_admas(). Introduce the XLNX_ZDMA configuration and select it to fix: $ qemu-system-aarch64 -M xlnx-versal-virt ... qemu-system-aarch64: missing object type 'xlnx.zdma' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210131184449.382425-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-10hw/dma/xilinx_axidma: Rename StreamSlave as StreamSinkPhilippe Mathieu-Daudé
In order to use inclusive terminology, rename 'slave stream' as 'sink stream'. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-Id: <20200910070131.435543-4-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10hw/core/stream: Rename StreamSlave as StreamSinkPhilippe Mathieu-Daudé
In order to use inclusive terminology, rename 'slave stream' as 'sink stream'. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-Id: <20200910070131.435543-3-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-28sparc32-ledma: don't reference nd_table directly within the deviceMark Cave-Ayland
Instead use qdev_set_nic_properties() to configure the on-board NIC at the sun4m machine level. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200926140216.7368-5-mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2020-10-28sparc32-espdma: use object_initialize_child() for esp child objectMark Cave-Ayland
Store the child object directly within the sparc32-espdma object rather than using link properties. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200926140216.7368-4-mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2020-10-28sparc32-ledma: use object_initialize_child() for lance child objectMark Cave-Ayland
Store the child object directly within the sparc32-ledma object rather than using link properties. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200926140216.7368-3-mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2020-10-28sparc32-dma: use object_initialize_child() for espdma and ledma child objectsMark Cave-Ayland
Store the child objects directly within the sparc32-dma object rather than using link properties. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200926140216.7368-2-mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-13Merge remote-tracking branch ↵Peter Maydell
'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging This PR includes multiple fixes and features for RISC-V: - Fixes a bug in printing trap causes - Allows 16-bit writes to the SiFive test device. This fixes the failure to reboot the RISC-V virt machine - Support for the Microchip PolarFire SoC and Icicle Kit - A reafactor of RISC-V code out of hw/riscv # gpg: Signature made Thu 10 Sep 2020 19:08:06 BST # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits) hw/riscv: Sort the Kconfig options in alphabetical order hw/riscv: Drop CONFIG_SIFIVE hw/riscv: Always build riscv_hart.c hw/riscv: Move sifive_test model to hw/misc hw/riscv: Move sifive_uart model to hw/char hw/riscv: Move riscv_htif model to hw/char hw/riscv: Move sifive_plic model to hw/intc hw/riscv: Move sifive_clint model to hw/intc hw/riscv: Move sifive_gpio model to hw/gpio hw/riscv: Move sifive_u_otp model to hw/misc hw/riscv: Move sifive_u_prci model to hw/misc hw/riscv: Move sifive_e_prci model to hw/misc hw/riscv: sifive_u: Connect a DMA controller hw/riscv: clint: Avoid using hard-coded timebase frequency hw/riscv: microchip_pfsoc: Hook GPIO controllers hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23 hw/net: cadence_gem: Add a new 'phy-addr' property hw/riscv: microchip_pfsoc: Connect a DMA controller hw/dma: Add SiFive platform DMA controller emulation ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/riscv/trace-events
2020-09-12Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging trivial patches pull request 20200911 # gpg: Signature made Fri 11 Sep 2020 20:32:27 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.2-pull-request: target/i386/kvm: Add missing fallthrough comment util/hexdump: Reorder qemu_hexdump() arguments util/hexdump: Convert to take a void pointer argument hw/arm/pxa2xx: Add missing fallthrough comment target/i386/kvm: Rename host_tsx_blacklisted() as host_tsx_broken() test-vmstate: remove unnecessary code in match_interval_mapping_node hw: hyperv: vmbus: Fix 32bit compilation kconfig: fix comment referring to old Makefiles meson.build: tweak sdl-image error message hw/net/e1000e: Remove duplicated write handler for FLSWDATA register hw/net/e1000e: Remove overwritten read handler for STATUS register Makefile: Skip the meson subdir in cscope/TAGS/ctags Makefile: Drop extra phony cscope hw/gpio/max7310: Replace disabled printf() by qemu_log_mask(UNIMP) hw/gpio/omap_gpio: Replace fprintf() by qemu_log_mask(GUEST_ERROR) hw/acpi/tco: Remove unused definitions hw/isa/isa-bus: Replace hw_error() by assert() hw/mips/fuloong2e: Convert pointless error message to an assert() Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # net/colo-compare.c
2020-09-11util/hexdump: Reorder qemu_hexdump() argumentsPhilippe Mathieu-Daudé
qemu_hexdump()'s pointer to the buffer and length of the buffer are closely related arguments but are widely separated in the argument list order (also, the format of <stdio.h> function prototypes is usually to have the FILE* argument coming first). Reorder the arguments as "fp, prefix, buf, size" which is more logical. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20200822180950.1343963-3-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-11util/hexdump: Convert to take a void pointer argumentPhilippe Mathieu-Daudé
Most uses of qemu_hexdump() do not take an array of char as input, forcing use of cast. Since we can use this helper to dump any kind of buffer, use a pointer to void argument instead. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20200822180950.1343963-2-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-09hw/dma: Add SiFive platform DMA controller emulationBin Meng
Microchip PolarFire SoC integrates a DMA engine that supports: * Independent concurrent DMA transfers using 4 DMA channels * Generation of interrupts on various conditions during execution which is actually an IP reused from the SiFive FU540 chip. This creates a model to support both polling and interrupt modes. Signed-off-by: Bin Meng <bin.meng@windriver.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-10-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09xilinx_axidma: Use typedef name for instance_sizeEduardo Habkost
This makes the code consistent with the rest of QOM code in QEMU, and will make automated conversion to type declaration macros simpler. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200824215936.2961951-2-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09esp: Rename ESP_STATE to ESPEduardo Habkost
Make the type checking macro name consistent with the TYPE_* constant. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <20200902224311.1321159-40-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-27i8257: Move QOM macro to headerEduardo Habkost
Move the I8257 macro to i8257.h, close to the TYPE_I8257 define. This will make future conversion to OBJECT_DECLARE* easier. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Tested-By: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200825192110.3528606-32-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-21meson: convert hw/dmaMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21trace: switch position of headers to what Meson requiresPaolo Bonzini
Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-21hw: Mark nd_table[] misuse in realize methods FIXMEMarkus Armbruster
nd_table[] contains NIC configuration for boards to pick up. Device code has no business looking there. Several devices do it anyway. Two of them already have a suitable FIXME comment: "allwinner-a10" and "msf2-soc". Copy it to the others: "allwinner-h3", "xlnx-versal", "xlnx,zynqmp", "sparc32-ledma", "riscv.sifive.u.soc". Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200715140440.3540942-3-armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-07-10qom: Put name parameter before value / visitor parameterMarkus Armbruster
The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-10qom: Don't handle impossible object_property_get_link() failureMarkus Armbruster
Don't handle object_property_get_link() failure that can't happen unless the programmer screwed up, pass &error_abort. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200707160613.848843-25-armbru@redhat.com>
2020-07-02hw: Fix error API violation around object_property_set_link()Markus Armbruster
The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. virtio_gpu_pci_base_realize(), virtio_vga_base_realize(), sparc32_ledma_device_realize(), sparc32_dma_realize(), sparc32_dma_realize() xilinx_axidma_realize(), mips_cps_realize(), macio_realize_ide(), xilinx_enet_realize(), and virtio_iommu_pci_realize() are wrong that way: they reuse the argument they pass to object_property_set_link() for another call. Harmless, because object_property_set_link() can't actually fail for them: it fails when the property doesn't exist, is not settable, or its .check() method fails. Fix by passing &error_abort instead. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Alistair Francis <alistair@alistair23.me> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-arm@nongnu.org Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com> Cc: Eric Auger <eric.auger@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200630090351.1247703-16-armbru@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2020-06-15sysbus: Convert to sysbus_realize() etc. with CoccinelleMarkus Armbruster
Convert from qdev_realize(), qdev_realize_and_unref() with null @bus argument to sysbus_realize(), sysbus_realize_and_unref(). Coccinelle script: @@ expression dev, errp; @@ - qdev_realize(DEVICE(dev), NULL, errp); + sysbus_realize(SYS_BUS_DEVICE(dev), errp); @@ expression sysbus_dev, dev, errp; @@ + sysbus_dev = SYS_BUS_DEVICE(dev); - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); - sysbus_dev = SYS_BUS_DEVICE(dev); @@ expression sysbus_dev, dev, errp; expression expr; @@ sysbus_dev = SYS_BUS_DEVICE(dev); ... when != dev = expr; - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(DEVICE(dev), NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); Whitespace changes minimized manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-46-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15qom: Less verbose object_initialize_child()Markus Armbruster
All users of object_initialize_child() pass the obvious child size argument. Almost all pass &error_abort and no properties. Tiresome. Rename object_initialize_child() to object_initialize_child_with_props() to free the name. New convenience wrapper object_initialize_child() automates the size argument, and passes &error_abort and no properties. Rename object_initialize_childv() to object_initialize_child_with_propsv() for consistency. Convert callers with this Coccinelle script: @@ expression parent, propname, type; expression child, size; symbol error_abort; @@ - object_initialize_child(parent, propname, OBJECT(child), size, type, &error_abort, NULL) + object_initialize_child(parent, propname, child, size, type, &error_abort, NULL) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, child, sizeof(*child), type, &error_abort, NULL) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, &child, sizeof(child), type, &error_abort, NULL) + object_initialize_child(parent, propname, &child, type) @@ expression parent, propname, type; expression child, size, err; expression list props; @@ - object_initialize_child(parent, propname, child, size, type, err, props) + object_initialize_child_with_props(parent, propname, child, size, type, err, props) Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> [Rebased: machine opentitan is new (commit fe0fe4735e7)] Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-37-armbru@redhat.com>
2020-06-15isa: Convert uses of isa_create() with CoccinelleMarkus Armbruster
Replace dev = isa_create(bus, type_name); ... qdev_init_nofail(dev); by dev = isa_new(type_name); ... isa_realize_and_unref(dev, bus, &error_fatal); Recent commit "qdev: New qdev_new(), qdev_realize(), etc." explains why. Coccinelle script: @@ expression dev, bus, expr; expression list args; expression d; @@ - dev = isa_create(bus, args); + dev = isa_new(args); ( d = &dev->qdev; | d = DEVICE(dev); ) ... when != dev = expr - qdev_init_nofail(d); + isa_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = isa_create(bus, args); + dev = isa_new(args); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + isa_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = DEVICE(isa_create(bus, args)); + ISADevice *isa_dev; // TODO move + isa_dev = isa_new(args); + dev = DEVICE(isa_dev); ... when != dev = expr - qdev_init_nofail(dev); + isa_realize_and_unref(isa_dev, bus, &error_fatal); Missing #include "qapi/error.h" added manually, whitespace changes minimized manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-20-armbru@redhat.com>
2020-06-15qdev: Convert uses of qdev_create() with CoccinelleMarkus Armbruster
This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-09hw/unicore32/puv3: Use qemu_log_mask(ERROR) instead of debug printf()Philippe Mathieu-Daudé
Replace some debug printf() calls by qemu_log_mask(LOG_GUEST_ERROR). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200524164503.11944-1-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-05-21hw/arm/pxa2xx: Replace hw_error() by qemu_log_mask()Philippe Mathieu-Daudé
hw_error() calls exit(). This a bit overkill when we can log the accesses as unimplemented or guest error. When fuzzing the devices, we don't want the whole process to exit. Replace some hw_error() calls by qemu_log_mask(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200518140309.5220-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-15qdev: Unrealize must not failMarkus Armbruster
Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-05-15qom: Drop parameter @errp of object_property_add() & friendsMarkus Armbruster
The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-01 12:26:30 +0000