aboutsummaryrefslogtreecommitdiff
path: root/hw/arm
AgeCommit message (Collapse)Author
2021-09-01hw/arm/stm32f100: Wire up sysclk and refclkPeter Maydell
Wire up the sysclk and refclk for the stm32f100 SoC. This SoC always runs the systick refclk at 1/8 the frequency of the main CPU clock, so the board code only needs to provide a single sysclk clock. Because there is only one board using this SoC, we convert the SoC and the board together, rather than splitting it into "add clock to SoC; connect clock in board; add error check in SoC code that clock is wired up". When the systick device starts honouring its clock inputs, this will fix an emulation inaccuracy in the stm32vldiscovery board where the systick reference clock was running at 1MHz rather than 3MHz. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210812093356.1946-12-peter.maydell@linaro.org
2021-09-01hw/arm: Don't allocate separate MemoryRegions in stm32 SoC realizePeter Maydell
In the realize methods of the stm32f100 and stm32f205 SoC objects, we call g_new() to create new MemoryRegion objects for the sram, flash, and flash_alias. This is unnecessary (and leaves open the possibility of leaking the allocations if we exit from realize with an error). Make these MemoryRegions member fields of the device state struct instead, as stm32f405 already does. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210812093356.1946-11-peter.maydell@linaro.org
2021-09-01hw/arm/mps2.c: Connect up armv7m clocksPeter Maydell
Connect up the armv7m clocks on the mps2-an385/386/500/511. Connect up the armv7m object's clocks on the MPS boards defined in mps2.c. The documentation for these FPGA images doesn't specify what systick reference clock is used (if any), so for the moment we provide a 1MHz refclock, which will result in no behavioural change from the current hardwired 1MHz clock implemented in armv7m_systick.c:systick_scale(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210812093356.1946-9-peter.maydell@linaro.org
2021-09-01armsse: Wire up systick cpuclk clockPeter Maydell
Wire up the cpuclk for the systick devices to the SSE object's existing mainclk clock. We do not wire up the refclk because the SSE subsystems do not provide a refclk. (This is documented in the IoTKit and SSE-200 TRMs; the SSE-300 TRM doesn't mention it but we assume it follows the same approach.) When we update the systick device later to honour "no refclk connected" this will fix a minor emulation inaccuracy for the SSE-based boards. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210812093356.1946-8-peter.maydell@linaro.org
2021-09-01hw/arm/armv7m: Create input clocksPeter Maydell
Create input clocks on the armv7m container object which pass through to the systick timers, so that users of the armv7m object can specify the clocks being used. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210812093356.1946-7-peter.maydell@linaro.org
2021-09-01arm: Move system PPB container handling to armv7mPeter Maydell
Instead of having the NVIC device provide a single sysbus memory region covering the whole of the "System PPB" space, which implements the default behaviour for unimplemented ranges and provides the NS alias window to the sysregs as well as the main sysreg MR, move this handling to the container armv7m device. The NVIC now provides a single memory region which just implements the system registers. This consolidates all the handling of "map various devices in the PPB" into the armv7m container where it belongs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210812093356.1946-4-peter.maydell@linaro.org
2021-09-01arm: Move systick device creation from NVIC to ARMv7M objectPeter Maydell
There's no particular reason why the NVIC should be owning the SysTick device objects; move them into the ARMv7M container object instead, as part of consolidating the "create the devices which are built into an M-profile CPU and map them into their architected locations in the address space" work into one place. This involves temporarily creating a duplicate copy of the nvic_sysreg_ns_ops struct and its read/write functions (renamed as v7m_sysreg_ns_*), but we will delete the NVIC's copy of this code in a subsequent patch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210812093356.1946-3-peter.maydell@linaro.org
2021-09-01arm: Move M-profile RAS register block into its own devicePeter Maydell
Currently we implement the RAS register block within the NVIC device. It isn't really very tightly coupled with the NVIC proper, so instead move it out into a sysbus device of its own and have the top level ARMv7M container create it and map it into memory at the right address. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Message-id: 20210812093356.1946-2-peter.maydell@linaro.org
2021-09-01hw/arm/virt: target-arm: Add A64FX processor support to virt machineShuuichirou Ishii
Add -cpu a64fx to use A64FX processor when -machine virt option is specified. In addition, add a64fx to the Supported guest CPU types in the virt.rst document. Signed-off-by: Shuuichirou Ishii <ishii.shuuichir@fujitsu.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-01hw: Add compat machines for 6.2Yanan Wang
Add 6.2 machine types for arm/i440fx/q35/s390x/spapr. Signed-off-by: Yanan Wang <wangyanan55@huawei.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-01hw/arm/raspi: Remove deprecated raspi2/raspi3 aliasesPhilippe Mathieu-Daudé
Remove the raspi2/raspi3 machine aliases, deprecated since commit 155e1c82ed0. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210827060815.2384760-3-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-08-26hw/arm/xlnx-zynqmp: Add unimplemented APU mmioTong Ho
Add unimplemented APU mmio region to xlnx-zynqmp for booting bare-metal guests built with standalone bsp, which access the region from one of the following places: https://github.com/Xilinx/embeddedsw/blob/release-2020.2/lib/bsp/standalone/src/arm/ARMv8/64bit/armclang/boot.S#L139 https://github.com/Xilinx/embeddedsw/blob/release-2020.2/lib/bsp/standalone/src/arm/ARMv8/64bit/gcc/boot.S#L183 Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Tong Ho <tong.ho@xilinx.com> Message-id: 20210823173818.201259-3-tong.ho@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-08-26hw/arm/xlnx-versal: Add unimplemented APU mmioTong Ho
Add unimplemented APU mmio region to xlnx-versal for booting bare-metal guests built with standalone bsp, which access the region from one of the following places: https://github.com/Xilinx/embeddedsw/blob/release-2020.2/lib/bsp/standalone/src/arm/ARMv8/64bit/armclang/boot.S#L139 https://github.com/Xilinx/embeddedsw/blob/release-2020.2/lib/bsp/standalone/src/arm/ARMv8/64bit/gcc/boot.S#L183 Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Tong Ho <tong.ho@xilinx.com> Message-id: 20210823173818.201259-2-tong.ho@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-08-26hw/arm/virt: Delete EL3 error checksnow provided in CPU realizePeter Maydell
Now that the CPU realize function will fail cleanly if we ask for EL3 when KVM is enabled, we don't need to check for errors explicitly in the virt board code. The reported message is slightly different; it is now: qemu-system-aarch64: Cannot enable KVM when guest CPU has EL3 enabled instead of: qemu-system-aarch64: mach-virt: KVM does not support Security extensions We don't delete the MTE check because there the logic is more complex; deleting the check would work but makes the error message less helpful, as it would read: qemu-system-aarch64: MTE requested, but not supported by the guest CPU instead of: qemu-system-aarch64: mach-virt: KVM does not support providing MTE to the guest CPU Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210816135842.25302-4-peter.maydell@linaro.org
2021-08-26raspi: Use error_fatal for SoC realize errors, not error_abortPeter Maydell
The SoC realize can fail for legitimate reasons, because it propagates errors up from CPU realize, which in turn can be provoked by user error in setting commandline options. Use error_fatal so we report the error message to the user and exit, rather than asserting via error_abort. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210816135842.25302-2-peter.maydell@linaro.org
2021-08-26hw/arm/Kconfig: no need to enable ACPI_MEMORY_HOTPLUG/ACPI_NVDIMM explicitlyAni Sinha
Since commit 36b79e3219d ("hw/acpi/Kconfig: Add missing Kconfig dependencies (build error)"), ACPI_MEMORY_HOTPLUG and ACPI_NVDIMM is implicitly turned on when ACPI_HW_REDUCED is selected. ACPI_HW_REDUCED is already enabled. No need to turn on ACPI_MEMORY_HOTPLUG or ACPI_NVDIMM explicitly. This is a minor cleanup. Signed-off-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210819162637.518507-1-ani@anisinha.ca Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-08-26hw/dma/xlnx-zdma Always expect 'dma' link property to be setPhilippe Mathieu-Daudé
Simplify by always passing a MemoryRegion property to the device. Doing so we can move the AddressSpace field to the device struct, removing need for heap allocation. Update the Xilinx ZynqMP / Versal SoC models to pass the default system memory instead of a NULL value. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210819163422.2863447-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-08-26hw/dma/xlnx_csu_dma: Always expect 'dma' link property to be setPhilippe Mathieu-Daudé
Simplify by always passing a MemoryRegion property to the device. Doing so we can move the AddressSpace field to the device struct, removing need for heap allocation. Update the Xilinx ZynqMP SoC model to pass the default system memory instead of a NULL value. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210819163422.2863447-4-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-08-26hw/arm/xlnx-zynqmp: Realize qspi controller *after* qspi_dmaPhilippe Mathieu-Daudé
If we link QOM object (a) as a property of QOM object (b), we must set the property *before* (b) is realized. Move QSPI realization *after* QSPI DMA. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210819163422.2863447-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-08-25fsl-imx7: Instantiate SAI1/2/3 as unimplemented devicesGuenter Roeck
Instantiate SAI1/2/3 as unimplemented devices to avoid Linux kernel crashes such as the following. Unhandled fault: external abort on non-linefetch (0x808) at 0xd19b0000 pgd = (ptrval) [d19b0000] *pgd=82711811, *pte=308a0653, *ppte=308a0453 Internal error: : 808 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0-rc5 #1 ... [<c095e974>] (regmap_mmio_write32le) from [<c095eb48>] (regmap_mmio_write+0x3c/0x54) [<c095eb48>] (regmap_mmio_write) from [<c09580f4>] (_regmap_write+0x4c/0x1f0) [<c09580f4>] (_regmap_write) from [<c0959b28>] (regmap_write+0x3c/0x60) [<c0959b28>] (regmap_write) from [<c0d41130>] (fsl_sai_runtime_resume+0x9c/0x1ec) [<c0d41130>] (fsl_sai_runtime_resume) from [<c0942464>] (__rpm_callback+0x3c/0x108) [<c0942464>] (__rpm_callback) from [<c0942590>] (rpm_callback+0x60/0x64) [<c0942590>] (rpm_callback) from [<c0942b60>] (rpm_resume+0x5cc/0x808) [<c0942b60>] (rpm_resume) from [<c0942dfc>] (__pm_runtime_resume+0x60/0xa0) [<c0942dfc>] (__pm_runtime_resume) from [<c0d4231c>] (fsl_sai_probe+0x2b8/0x65c) [<c0d4231c>] (fsl_sai_probe) from [<c0935b08>] (platform_probe+0x58/0xb8) [<c0935b08>] (platform_probe) from [<c0933264>] (really_probe.part.0+0x9c/0x334) [<c0933264>] (really_probe.part.0) from [<c093359c>] (__driver_probe_device+0xa0/0x138) [<c093359c>] (__driver_probe_device) from [<c0933664>] (driver_probe_device+0x30/0xc8) [<c0933664>] (driver_probe_device) from [<c0933c88>] (__driver_attach+0x90/0x130) [<c0933c88>] (__driver_attach) from [<c0931060>] (bus_for_each_dev+0x78/0xb8) [<c0931060>] (bus_for_each_dev) from [<c093254c>] (bus_add_driver+0xf0/0x1d8) [<c093254c>] (bus_add_driver) from [<c0934a30>] (driver_register+0x88/0x118) [<c0934a30>] (driver_register) from [<c01022c0>] (do_one_initcall+0x7c/0x3a4) [<c01022c0>] (do_one_initcall) from [<c1601204>] (kernel_init_freeable+0x198/0x22c) [<c1601204>] (kernel_init_freeable) from [<c0f5ff2c>] (kernel_init+0x10/0x128) [<c0f5ff2c>] (kernel_init) from [<c010013c>] (ret_from_fork+0x14/0x38) Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20210810175607.538090-1-linux@roeck-us.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-08-25sbsa-ref: Rename SBSA_GWDT enum valueEduardo Habkost
The SBSA_GWDT enum value conflicts with the SBSA_GWDT() QOM type checking helper, preventing us from using a OBJECT_DEFINE* or DEFINE_INSTANCE_CHECKER macro for the SBSA_GWDT() wrapper. If I understand the SBSA 6.0 specification correctly, the signal being connected to IRQ 16 is the WS0 output signal from the Generic Watchdog. Rename the enum value to SBSA_GWDT_WS0 to be more explicit and avoid the name conflict. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-id: 20210806023119.431680-1-ehabkost@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-08-25hw/dma/pl330: Add memory region to replace defaultWen, Jianxian
Add property memory region which can connect with IOMMU region to support SMMU translate. Signed-off-by: Jianxian Wen <jianxian.wen@verisilicon.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 4C23C17B8E87E74E906A25A3254A03F4FA1FEC31@SHASXM03.verisilicon.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-08-25fsl-imx6ul: Instantiate SAI1/2/3 and ASRC as unimplemented devicesGuenter Roeck
Instantiate SAI1/2/3 and ASRC as unimplemented devices to avoid random Linux kernel crashes, such as Unhandled fault: external abort on non-linefetch (0x808) at 0xd1580010 pgd = (ptrval) [d1580010] *pgd=8231b811, *pte=02034653, *ppte=02034453 Internal error: : 808 [#1] SMP ARM ... [<c095e974>] (regmap_mmio_write32le) from [<c095eb48>] (regmap_mmio_write+0x3c/0x54) [<c095eb48>] (regmap_mmio_write) from [<c09580f4>] (_regmap_write+0x4c/0x1f0) [<c09580f4>] (_regmap_write) from [<c095837c>] (_regmap_update_bits+0xe4/0xec) [<c095837c>] (_regmap_update_bits) from [<c09599b4>] (regmap_update_bits_base+0x50/0x74) [<c09599b4>] (regmap_update_bits_base) from [<c0d3e9e4>] (fsl_asrc_runtime_resume+0x1e4/0x21c) [<c0d3e9e4>] (fsl_asrc_runtime_resume) from [<c0942464>] (__rpm_callback+0x3c/0x108) [<c0942464>] (__rpm_callback) from [<c0942590>] (rpm_callback+0x60/0x64) [<c0942590>] (rpm_callback) from [<c0942b60>] (rpm_resume+0x5cc/0x808) [<c0942b60>] (rpm_resume) from [<c0942dfc>] (__pm_runtime_resume+0x60/0xa0) [<c0942dfc>] (__pm_runtime_resume) from [<c0d3ecc4>] (fsl_asrc_probe+0x2a8/0x708) [<c0d3ecc4>] (fsl_asrc_probe) from [<c0935b08>] (platform_probe+0x58/0xb8) [<c0935b08>] (platform_probe) from [<c0933264>] (really_probe.part.0+0x9c/0x334) [<c0933264>] (really_probe.part.0) from [<c093359c>] (__driver_probe_device+0xa0/0x138) [<c093359c>] (__driver_probe_device) from [<c0933664>] (driver_probe_device+0x30/0xc8) [<c0933664>] (driver_probe_device) from [<c0933c88>] (__driver_attach+0x90/0x130) [<c0933c88>] (__driver_attach) from [<c0931060>] (bus_for_each_dev+0x78/0xb8) [<c0931060>] (bus_for_each_dev) from [<c093254c>] (bus_add_driver+0xf0/0x1d8) [<c093254c>] (bus_add_driver) from [<c0934a30>] (driver_register+0x88/0x118) [<c0934a30>] (driver_register) from [<c01022c0>] (do_one_initcall+0x7c/0x3a4) [<c01022c0>] (do_one_initcall) from [<c1601204>] (kernel_init_freeable+0x198/0x22c) [<c1601204>] (kernel_init_freeable) from [<c0f5ff2c>] (kernel_init+0x10/0x128) [<c0f5ff2c>] (kernel_init) from [<c010013c>] (ret_from_fork+0x14/0x38) or Unhandled fault: external abort on non-linefetch (0x808) at 0xd19b0000 pgd = (ptrval) [d19b0000] *pgd=82711811, *pte=308a0653, *ppte=308a0453 Internal error: : 808 [#1] SMP ARM ... [<c095e974>] (regmap_mmio_write32le) from [<c095eb48>] (regmap_mmio_write+0x3c/0x54) [<c095eb48>] (regmap_mmio_write) from [<c09580f4>] (_regmap_write+0x4c/0x1f0) [<c09580f4>] (_regmap_write) from [<c0959b28>] (regmap_write+0x3c/0x60) [<c0959b28>] (regmap_write) from [<c0d41130>] (fsl_sai_runtime_resume+0x9c/0x1ec) [<c0d41130>] (fsl_sai_runtime_resume) from [<c0942464>] (__rpm_callback+0x3c/0x108) [<c0942464>] (__rpm_callback) from [<c0942590>] (rpm_callback+0x60/0x64) [<c0942590>] (rpm_callback) from [<c0942b60>] (rpm_resume+0x5cc/0x808) [<c0942b60>] (rpm_resume) from [<c0942dfc>] (__pm_runtime_resume+0x60/0xa0) [<c0942dfc>] (__pm_runtime_resume) from [<c0d4231c>] (fsl_sai_probe+0x2b8/0x65c) [<c0d4231c>] (fsl_sai_probe) from [<c0935b08>] (platform_probe+0x58/0xb8) [<c0935b08>] (platform_probe) from [<c0933264>] (really_probe.part.0+0x9c/0x334) [<c0933264>] (really_probe.part.0) from [<c093359c>] (__driver_probe_device+0xa0/0x138) [<c093359c>] (__driver_probe_device) from [<c0933664>] (driver_probe_device+0x30/0xc8) [<c0933664>] (driver_probe_device) from [<c0933c88>] (__driver_attach+0x90/0x130) [<c0933c88>] (__driver_attach) from [<c0931060>] (bus_for_each_dev+0x78/0xb8) [<c0931060>] (bus_for_each_dev) from [<c093254c>] (bus_add_driver+0xf0/0x1d8) [<c093254c>] (bus_add_driver) from [<c0934a30>] (driver_register+0x88/0x118) [<c0934a30>] (driver_register) from [<c01022c0>] (do_one_initcall+0x7c/0x3a4) [<c01022c0>] (do_one_initcall) from [<c1601204>] (kernel_init_freeable+0x198/0x22c) [<c1601204>] (kernel_init_freeable) from [<c0f5ff2c>] (kernel_init+0x10/0x128) [<c0f5ff2c>] (kernel_init) from [<c010013c>] (ret_from_fork+0x14/0x38) Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20210810160318.87376-1-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-08-02hw/arm/boot: Report error if there is no fw_cfg device in the machinePeter Maydell
If the user provides both a BIOS/firmware image and also a guest kernel filename, arm_setup_firmware_boot() will pass the kernel image to the firmware via the fw_cfg device. However we weren't checking whether there really was a fw_cfg device present, and if there wasn't we would crash. This crash can be provoked with a command line such as qemu-system-aarch64 -M raspi3 -kernel /dev/null -bios /dev/null -display none It is currently only possible on the raspi3 machine, because unless the machine sets info->firmware_loaded we won't call arm_setup_firmware_boot(), and the only machines which set that are: * virt (has a fw-cfg device) * sbsa-ref (checks itself for kernel_filename && firmware_loaded) * raspi3 (crashes) But this is an unfortunate beartrap to leave for future machine model implementors, so we should handle this situation in boot.c. Check in arm_setup_firmware_boot() whether the fw-cfg device exists before trying to load files into it, and if it doesn't exist then exit with a hopefully helpful error message. Because we now handle this check in a machine-agnostic way, we can remove the check from sbsa-ref. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/503 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210726163351.32086-1-peter.maydell@linaro.org
2021-07-27hw/arm/nseries: Display hexadecimal value with '0x' prefixPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210726150953.1218690-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-27hw/arm/smmuv3: Check 31st bit to see if CD is validJoe Komlodi
The bit to see if a CD is valid is the last bit of the first word of the CD. Signed-off-by: Joe Komlodi <joe.komlodi@xilinx.com> Message-id: 1626728232-134665-2-git-send-email-joe.komlodi@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-20hw/arm/Kconfig: Add missing SDHCI symbol to FSL_IMX25Philippe Mathieu-Daudé
Commit bfae1772c43 ("hw/arm/fsl-imx25: Wire up eSDHC controllers") added a dependency on the TYPE_IMX_USDHC model, but forgot to add the Kconfig selector. Fix that to solve when built stand-alone: $ qemu-system-arm -M imx25-pdk qemu-system-arm: missing object type 'imx-usdhc' Aborted (core dumped) Fixes: bfae1772c43 ("hw/arm/fsl-imx25: Wire up eSDHC controllers") Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210515173716.358295-6-philmd@redhat.com>
2021-07-20hw/arm/Kconfig: Remove unused DS1338 symbol from i.MX25 PDK BoardPhilippe Mathieu-Daudé
In commit c4f00daa5b3 ("imx25-pdk: create ds1338 for qtest inside the test") we removed the DS1338 device from the i.MX25 machine but forgot to remove it in the machine Kconfig definitions, do it now. Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210515173716.358295-5-philmd@redhat.com>
2021-07-20hw/arm/Kconfig: Add missing dependency NPCM7XX -> SMBUSPhilippe Mathieu-Daudé
The TYPE_NPCM7XX_SMBUS device model exposes an SMBus, but this isn't advertised with proper Kconfig symbol, leading to an early build failure when building NPCM7XX machines standalone: The following clauses were found for AT24C config AT24C depends on I2C select AT24C if NPCM7XX Fix by adding SMBUS to NPCM7XX. Fixes: 94e77879395 ("hw/i2c: Implement NPCM7XX SMBus Module Single Mode") Reviewed-by: Hao Wu <wuhaotsh@google.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210515173716.358295-4-philmd@redhat.com>
2021-07-16hw/arm/virt-acpi-build: Add IORT support to bypass SMMUv3Xingang Wang
When we build IORT table with SMMUv3 and bypass iommu feature enabled, we can no longer setup one map from RC to SMMUv3 covering the whole RIDs. We need to walk the PCI bus and check whether the root bus will bypass iommu, setup RC -> SMMUv3 -> ITS map for RC which will not bypass iommu. When a SMMUv3 node exist, we setup the idmap from SMMUv3 to ITS covering the whole RIDs, and only modify the map from RC to SMMUv3. We build RC -> SMMUv3 -> ITS map for root bus with bypass_iommu disabled, and build idmap from RC to ITS directly for the rest of the whole RID space. For example we run qemu with command line: qemu/build/aarch64-softmmu/qemu-system-aarch64 \ -kernel arch/arm64/boot/Image \ -enable-kvm \ -cpu host \ -m 8G \ -smp 8,sockets=2,cores=4,threads=1 \ -machine virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3,default_bus_bypass_iommu=true \ -drive file=./QEMU_EFI-pflash.raw,if=pflash,format=raw,unit=0,readonly=on \ -device pxb-pcie,bus_nr=0x10,id=pci.10,bus=pcie.0,addr=0x3.0x1 \ -device pxb-pcie,bus_nr=0x20,id=pci.20,bus=pcie.0,addr=0x3.0x2,bypass_iommu=true \ -device pcie-root-port,port=0x20,chassis=1,id=pci.1,bus=pcie.0,addr=0x2 \ -device pcie-root-port,port=0x20,chassis=11,id=pci.11,bus=pci.10,addr=0x1 \ -device pcie-root-port,port=0x20,chassis=21,id=pci.21,bus=pci.20,addr=0x1 \ -device virtio-scsi-pci,id=scsi0,bus=pci.1,addr=0x1 \ -device virtio-scsi-pci,id=scsi1,bus=pci.11,addr=0x1 \ -device virtio-scsi-pci,id=scsi2,bus=pci.21,addr=0x1 \ -initrd /mnt/davinci/wxg/kill-linux/rootfs/mfs.cpio.gz \ -nographic \ -append "rdinit=init console=ttyAMA0 earlycon=pl011,0x9000000 nokaslr" \ And we get guest configuration: -+-[0000:20]---01.0-[21]-- +-[0000:10]---01.0-[11]-- \-[0000:00]-+-00.0 Device 1b36:0008 +-01.0 Device 1af4:1000 \-02.0-[01]-- With bypass_iommu enabled, the attached devices will bypass iommu. /sys/class/iommu/smmu3.0x0000000009050000/ |-- device -> ../../../arm-smmu-v3.0.auto |-- devices | `-- 0000:10:01.0 -> ../../../../../pci0000:10/0000:10:01.0 Signed-off-by: Xingang Wang <wangxingang5@huawei.com> Message-Id: <1625748919-52456-7-git-send-email-wangxingang5@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-16hw/arm/virt: Add default_bus_bypass_iommu machine optionXingang Wang
Add a default_bus_bypass_iommu machine option to enable/disable bypass_iommu for default root bus. The option is disabled by default and can be enabled with: $QEMU -machine virt,iommu=smmuv3,default_bus_bypass_iommu=true Signed-off-by: Xingang Wang <wangxingang5@huawei.com> Message-Id: <1625748919-52456-4-git-send-email-wangxingang5@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-11Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell
staging * More SVM fixes (Lara) * Module annotation database (Gerd) * Memory leak fixes (myself) * Build fixes (myself) * --with-devices-* support (Alex) # gpg: Signature made Fri 09 Jul 2021 17:23:52 BST # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: (48 commits) meson: Use input/output for entitlements target configure: allow the selection of alternate config in the build configs: rename default-configs to configs and reorganise hw/arm: move CONFIG_V7M out of default-devices hw/arm: add dependency on OR_IRQ for XLNX_VERSAL meson: Introduce target-specific Kconfig meson: switch function tests from compilation to linking vl: fix leak of qdict_crumple return value target/i386: fix exceptions for MOV to DR target/i386: Added DR6 and DR7 consistency checks target/i386: Added MSRPM and IOPM size check monitor/tcg: move tcg hmp commands to accel/tcg, register them dynamically usb: build usb-host as module monitor/usb: register 'info usbhost' dynamically usb: drop usb_host_dev_is_scsi_storage hook monitor: allow register hmp commands accel: build tcg modular accel: add tcg module annotations accel: build qtest modular accel: add qtest module annotations ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-11Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-2' into stagingPeter Maydell
Some qemu updates for IPMI and I2C Move some ADC file to where they belong and move some sensors to a sensor directory, since with new BMCs coming in lots of different sensors should be coming in. Keep from cluttering things up. Add support for I2C PMBus devices. Replace the confusing and error-prone i2c_send_recv and i2c_transfer with specific send and receive functions. Several errors have already been made with these, avoid any new errors. Fix the watchdog_expired field in the IPMI watchdog, it's not a bool, it's a u8. After a vmstate transfer, the new value could be wrong. # gpg: Signature made Fri 09 Jul 2021 17:25:04 BST # gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81 # gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown] # gpg: aka "Corey Minyard <minyard@acm.org>" [unknown] # gpg: aka "Corey Minyard <corey@minyard.net>" [unknown] # gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81 * remotes/cminyard/tags/for-qemu-6.1-2: (24 commits) tests/qtest: add tests for MAX34451 device model hw/misc: add MAX34451 device tests/qtest: add tests for ADM1272 device model hw/misc: add ADM1272 device hw/i2c: add support for PMBus ipmi/sim: fix watchdog_expired data type error in IPMIBmcSim struct hw/i2c: Introduce i2c_start_recv() and i2c_start_send() hw/i2c: Extract i2c_do_start_transfer() from i2c_start_transfer() hw/i2c: Make i2c_start_transfer() direction argument a boolean hw/i2c: Rename i2c_set_slave_address() -> i2c_slave_set_address() hw/i2c: Remove confusing i2c_send_recv() hw/misc/auxbus: Replace i2c_send_recv() by i2c_recv() & i2c_send() hw/misc/auxbus: Replace 'is_write' boolean by its value hw/misc/auxbus: Explode READ_I2C / WRITE_I2C_MOT cases hw/misc/auxbus: Fix MOT/classic I2C mode hw/i2c/ppc4xx_i2c: Replace i2c_send_recv() by i2c_recv() & i2c_send() hw/i2c/ppc4xx_i2c: Add reference to datasheet hw/display/sm501: Replace i2c_send_recv() by i2c_recv() & i2c_send() hw/display/sm501: Simplify sm501_i2c_write() logic hw/input/lm832x: Define TYPE_LM8323 in public header ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-09hw/arm: move CONFIG_V7M out of default-devicesAlex Bennée
We currently select CONFIG_V7M for a bunch of our m-profile devices. The last sticking point is translate.c which cannot be compiled without expecting v7m support. Express this dependency in Kconfig rather than in default devices as a stepping stone to a fully configurable translate.c. While we are at it we also need to select ARM_COMPATIBLE_SEMIHOSTING as that is implied for M profile machines. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210707131744.26027-4-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-09hw/arm: add dependency on OR_IRQ for XLNX_VERSALAlex Bennée
We need this functionality due to: /* XRAM IRQs get ORed into a single line. */ object_initialize_child(OBJECT(s), "xram-irq-orgate", &s->lpd.xram.irq_orgate, TYPE_OR_IRQ); Fixes: a55b441b2ca ("hw/arm: versal: Add support for the XRAMs") Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210707131744.26027-3-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-09hw/arm/stellaris: Expand comment about handling of OLED chipselectPeter Maydell
The stellaris board doesn't emulate the handling of the OLED chipselect line correctly. Expand the comment describing this, including a sketch of the theoretical correct way to do it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-09hw/arm/virt: Make PL061 GPIO lines pulled low, not highPeter Maydell
For the virt board we have two PL061 devices -- one for NonSecure which is inputs only, and one for Secure which is outputs only. For the former, we don't care whether its outputs are pulled low or high when the line is configured as an input, because we don't connect them. For the latter, we do care, because we wire the lines up to the gpio-pwr device, which assumes that level 1 means "do the action" and 1 means "do nothing". For consistency in case we add more outputs in future, configure both PL061s to pull GPIO lines down to 0. Reported-by: Maxim Uvarov <maxim.uvarov@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09stm32vldiscovery: Add the STM32VLDISCOVERY MachineAlexandre Iooss
This is a Cortex-M3 based machine. Information can be found at: https://www.st.com/en/evaluation-tools/stm32vldiscovery.html Signed-off-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210617165647.2575955-3-erdnaxe@crans.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-09stm32f100: Add the stm32f100 SoCAlexandre Iooss
This SoC is similar to stm32f205 SoC. This will be used by the STM32VLDISCOVERY to create a machine. Signed-off-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210617165647.2575955-2-erdnaxe@crans.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-08hw/misc: add MAX34451 deviceTitus Rwantare
The MAX34451 is a Maxim power-supply system manager that can monitor up to 16 voltage rails or currents. It also contains a temperature sensor and supports up to four external temperature sensors. This commit adds support for interfacing with it, and setting limits on the supported sensors. Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Titus Rwantare <titusr@google.com> Message-Id: <20210708172556.1868139-5-titusr@google.com> [Moved the device to the sensor directory] Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/misc: add ADM1272 deviceTitus Rwantare
The ADM1272 is a PMBus compliant Hot Swap Controller and Digital Power Monitor by Analog Devices. This commit adds support for interfacing with it, and support for setting and monitoring sensor limits. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1272.pdf Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Titus Rwantare <titusr@google.com> Message-Id: <20210708172556.1868139-3-titusr@google.com> [Moved the device to the sensor directory] [remove include of trace.h, it is not needed] Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/i2c: add support for PMBusTitus Rwantare
QEMU has support for SMBus devices, and PMBus is a more specific implementation of SMBus. The additions made in this commit makes it easier to add new PMBus devices to QEMU. https://pmbus.org/specification-archives/ Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Titus Rwantare <titusr@google.com> Message-Id: <20210708172556.1868139-2-titusr@google.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/i2c: Rename i2c_set_slave_address() -> i2c_slave_set_address()Philippe Mathieu-Daudé
Other functions from I2C slave API are named "i2c_slave_XXX()". Follow that pattern with set_address(). Add docstring along. No logical change. Patch created mechanically using: $ sed -i s/i2c_set_slave_address/i2c_slave_set_address/ \ $(git grep -l i2c_set_slave_address) Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/input/lm832x: Define TYPE_LM8323 in public headerPhilippe Mathieu-Daudé
Define TYPE_LM8323 in the public "hw/input/lm832x.h" header and use it in hw/arm/nseries.c. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/input/lm832x: Move lm832x_key_event() declaration to "lm832x.h"Philippe Mathieu-Daudé
lm832x_key_event() is specific go LM832x devices, not to the I2C bus API. Move it out of "i2c.h" to a new header. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-02hw/arm: Add basic power management to raspi.Nolan Leake
This is just enough to make reboot and poweroff work. Works for linux, u-boot, and the arm trusted firmware. Not tested, but should work for plan9, and bare-metal/hobby OSes, since they seem to generally do what linux does for reset. The watchdog timer functionality is not yet implemented. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/64 Signed-off-by: Nolan Leake <nolan@sigbus.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210625210209.1870217-1-nolan@sigbus.net [PMM: tweaked commit title; fixed region size to 0x200; moved header file to include/] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-17sensor: Move hardware sensors from misc to a sensor directoryCorey Minyard
Lots of this are expected to be coming in, create a directory for them. Also move the tmp105.h file into the include directory where it should be. Cc: Cédric Le Goater <clg@kaod.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: qemu-arm@nongnu.org Signed-off-by: Corey Minyard <cminyard@mvista.com> Acked-by: Cédric Le Goater <clg@kaod.org>
2021-06-17adc: Move the max111x driver to the adc directoryCorey Minyard
It's an adc, put it where it belongs. Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-arm@nongnu.org Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-06-17adc: Move the zynq-xadc file to the adc directoriesCorey Minyard
It's an ADC, put it where it belongs. Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Alistair Francis <alistair@alistair23.me> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-arm@nongnu.org Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2021-06-16Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20210616' into staging target-arm queue: * hw/intc/arm_gicv3_cpuif: Tolerate spurious EOIR writes * handle some UNALLOCATED decode cases correctly rather than asserting * hw: virt: consider hw_compat_6_0 * hw/arm: add quanta-gbs-bmc machine * hw/intc/armv7m_nvic: Remove stale comment * target/arm: Fix mte page crossing test * hw/arm: quanta-q71l add pca954x muxes * target/arm: First few parts of MVE support # gpg: Signature made Wed 16 Jun 2021 14:34:49 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20210616: (25 commits) include/qemu/int128.h: Add function to create Int128 from int64_t bitops.h: Provide hswap32(), hswap64(), wswap64() swapping operations target/arm: Move expand_pred_b() data to vec_helper.c target/arm: Add framework for MVE decode target/arm: Implement MVE LETP insn target/arm: Implement MVE DLSTP target/arm: Implement MVE WLSTP insn target/arm: Implement MVE LCTP target/arm: Let vfp_access_check() handle late NOCP checks target/arm: Add handling for PSR.ECI/ICI target/arm: Handle VPR semantics in existing code target/arm: Enable FPSCR.QC bit for MVE target/arm: Provide and use H8 and H1_8 macros hw/arm: quanta-q71l add pca954x muxes hw/arm: gsj add pca9548 hw/arm: gsj add i2c comments target/arm: Fix mte page crossing test hw/intc/armv7m_nvic: Remove stale comment hw/arm: quanta-gbs-bmc add i2c comments hw/arm: add quanta-gbs-bmc machine ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-13 17:10:03 +0000