aboutsummaryrefslogtreecommitdiff
path: root/hw/arm
AgeCommit message (Collapse)Author
2023-05-31hw/arm/xlnx-zynqmp: fix unsigned error when checking the RPUs numberClément Chigot
When passing --smp with a number lower than XLNX_ZYNQMP_NUM_APU_CPUS, the expression (ms->smp.cpus - XLNX_ZYNQMP_NUM_APU_CPUS) will result in a positive number as ms->smp.cpus is a unsigned int. This will raise the following error afterwards, as Qemu will try to instantiate some additional RPUs. | $ qemu-system-aarch64 --smp 1 -M xlnx-zcu102 | ** | ERROR:../src/tcg/tcg.c:777:tcg_register_thread: | assertion failed: (n < tcg_max_ctxs) Signed-off-by: Clément Chigot <chigot@adacore.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Tested-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20230524143714.565792-1-chigot@adacore.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit c9ba1c9f02cfede5329f504cdda6fd3a256e0434) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10hw/arm/raspi: Use arm_write_bootloader() to write boot codePeter Maydell
When writing the secondary-CPU stub boot loader code to the guest, use arm_write_bootloader() instead of directly calling rom_add_blob_fixed(). This fixes a bug on big-endian hosts, because arm_write_bootloader() will correctly byte-swap the host-byte-order array values into the guest-byte-order to write into the guest memory. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230424152717.1333930-4-peter.maydell@linaro.org (cherry picked from commit 0acbdb4c4ab6b0a09f159bae4899b0737cf64242) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10hw/arm/aspeed: Use arm_write_bootloader() to write the bootloaderCédric Le Goater
When writing the secondary-CPU stub boot loader code to the guest, use arm_write_bootloader() instead of directly calling rom_add_blob_fixed(). This fixes a bug on big-endian hosts, because arm_write_bootloader() will correctly byte-swap the host-byte-order array values into the guest-byte-order to write into the guest memory. Cc: qemu-stable@nongnu.org Signed-off-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230424152717.1333930-3-peter.maydell@linaro.org [PMM: Moved the "make arm_write_bootloader() function public" part to its own patch; updated commit message to note that this fixes an actual bug; adjust to the API changes noted in previous commit] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit 902bba549fc386b4b9805320ed1a2e5b68478bdd) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10hw/arm/boot: Make write_bootloader() public as arm_write_bootloader()Cédric Le Goater
The arm boot.c code includes a utility function write_bootloader() which assists in writing a boot-code fragment into guest memory, including handling endianness and fixing it up with entry point addresses and similar things. This is useful not just for the boot.c code but also in board model code, so rename it to arm_write_bootloader() and make it globally visible. Since we are making it public, make its API a little neater: move the AddressSpace* argument to be next to the hwaddr argument, and allow the fixupcontext array to be const, since we never modify it in this function. Cc: qemu-stable@nongnu.org Signed-off-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230424152717.1333930-2-peter.maydell@linaro.org [PMM: Split out from another patch by Cédric, added doc comment] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit 0fe43f0abf19bbe24df3dbf0613bb47ed55f1482) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-04-03hw/arm: do not free machine->fdt in arm_load_dtb()Markus Armbruster
At this moment, arm_load_dtb() can free machine->fdt when binfo->dtb_filename is NULL. If there's no 'dtb_filename', 'fdt' will be retrieved by binfo->get_dtb(). If get_dtb() returns machine->fdt, as is the case of machvirt_dtb() from hw/arm/virt.c, fdt now has a pointer to machine->fdt. And, in that case, the existing g_free(fdt) at the end of arm_load_dtb() will make machine->fdt point to an invalid memory region. Since monitor command 'dumpdtb' was introduced a couple of releases ago, running it with any ARM machine that uses arm_load_dtb() will crash QEMU. Let's enable all arm_load_dtb() callers to use dumpdtb properly. Instead of freeing 'fdt', assign it back to ms->fdt. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-arm@nongnu.org Fixes: bf353ad55590f ("qmp/hmp, device_tree.c: introduce dumpdtb") Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-id: 20230328165935.1512846-1-armbru@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-03-22*: Add missing includes of qemu/error-report.hRichard Henderson
This had been pulled in via qemu/plugin.h from hw/core/cpu.h, but that will be removed. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org> [AJB: add various additional cases shown by CI] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org> Reviewed-by: Emilio Cota <cota@braap.org>
2023-03-09Merge tag 'pull-aspeed-20230307' of https://github.com/legoater/qemu into ↵Peter Maydell
staging aspeed queue: * Small adjustments for the newest Meta machines * blk_pread_nonzeroes() fix required for pflash and m25p80 devices * Improve error reporting on file size for m25p80 devices # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmQHXi8ACgkQUaNDx8/7 # 7KHB7w//SQzcTNAUgMc6zbe3bULS9YU7csg0zX896DwQ9Ub4wtbnIps0/JwOsx6E # ss52YbbRVlHKcbahX6WW8JHtc6Wepcmnp4vC5dXdqgRryLTK5GgBu/GKcBb6qnHZ # uXwJpf7IwygOXQFg9Wy4zl3ipmrjgzMy6ZEbc3oqQUto+8E7HVMJiMXnrT5Y0yLt # Y76PywBxkYWcd522lWAXziXFxHaEJGMGrDCI/op4TuNAk0QLSRHp+x851JBF0Uyx # Lkp1cEjgADoH1FUfvo7aCNtAWGP4IFDprEupI3idPqjZ8KnnwPk2cnBMGeKJ5lWQ # XfSTwG5B3hYwGM0uYwHzHXUsq5/JGa0iDhSvjZVD8rf/w9BTek/GjypbJpL2XW6b # 4QaGGKGFWWMHbAaNVP6oEGqmkoC3QRKoQuaP6epaFyuSjNRWXkOhf5S5V10akjSc # xis0Z8gIpyLrtFT2TFc5BN9+z+PLgyaYyh7wZ2pFy1i6SOgh4FIFBOzQJDb05mmf # aFMD+6FOGx0wo8OXfy5EQyElWhVSYio+Hx9DaDP3d3cd/twHJx8nZ8QlXh2ThRd8 # jNLdFReJBImCJHSmYzbc/tGDOjg6+TWkZOzdjqTra08UwisK4XyOKj8E+sodWr0y # e/hI9nmIoarLCytMN1zElQFvj8xjpZ2lZOxr2EiX5ugYg0iuJhU= # =Xs26 # -----END PGP SIGNATURE----- # gpg: Signature made Tue 07 Mar 2023 15:54:23 GMT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * tag 'pull-aspeed-20230307' of https://github.com/legoater/qemu: hw/arm/aspeed: Modified BMC FRU byte data in yosemitev2 hw/arm/aspeed: Added TMP421 type sensor's support in tiogapass hw/arm/aspeed: Added TMP421 type sensor's support in yosemitev2 pflash: Fix blk_pread_nonzeroes() m25p80: Improve error when the backend file size does not match the device Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-03-07hw/arm/aspeed: Modified BMC FRU byte data in yosemitev2Karthikeyan Pasupathi
Modified BMC FRU data in yosemite v2 platform. Tested: Tested and Verified in yosemitev2 platform. Fixes: 34f73a81e6 ("hw/arm/aspeed: Adding new machine Yosemitev2 in QEMU") Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20230307104833.3587947-1-pkarthikeyan1509@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-03-07hw/arm/aspeed: Added TMP421 type sensor's support in tiogapassKarthikeyan Pasupathi
Added TMP421 type sensor support in tiogapass platform. Tested: Tested and verified in tiogapass platform. Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20230307103334.3586755-1-pkarthikeyan1509@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-03-07hw/arm/aspeed: Added TMP421 type sensor's support in yosemitev2Karthikeyan Pasupathi
Added TMP421 type support in yosemite v2 platform. Tested: Tested and verified in yosemite V2 platform. Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20230307095239.3583613-1-pkarthikeyan1509@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-03-06hw: arm: allwinner-h3: Fix and complete H3 i2c devicesqianfan Zhao
Allwinner h3 has 4 twi(i2c) devices named twi0, twi1, twi2 and r_twi. The registers are compatible with TYPE_AW_I2C_SUN6I, write 1 to clear control register's INT_FLAG bit. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Reviewed-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-03-06hw: arm: Support direct boot for Linux/arm64 EFI zboot imagesArd Biesheuvel
Fedora 39 will ship its arm64 kernels in the new generic EFI zboot format, using gzip compression for the payload. For doing EFI boot in QEMU, this is completely transparent, as the firmware or bootloader will take care of this. However, for direct kernel boot without firmware, we will lose the ability to boot such distro kernels unless we deal with the new format directly. EFI zboot images contain metadata in the header regarding the placement of the compressed payload inside the image, and the type of compression used. This means we can wire up the existing gzip support without too much hassle, by parsing the header and grabbing the payload from inside the loaded zboot image. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Alex Bennée <alex.bennee@linaro.org> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Message-id: 20230303160109.3626966-1-ardb@kernel.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: tweaked comment formatting, fixed checkpatch nits] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-03-03Merge tag 'pull-aspeed-20230302' of https://github.com/legoater/qemu into ↵Peter Maydell
staging aspeed queue: * fix for the Aspeed I2C slave mode * a new I2C echo device from Klaus and its associated test in avocado. * initial SoC cleanups to allow the use of block devices instead of drives on the command line. * new facebook machines and eeprom fixes for the Fuji * readline fix # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmQAnrQACgkQUaNDx8/7 # 7KGIvQ//Te2eSxlZNxAXHb3HSVFRaBW+2EkJzNlalX75olFSzCLe8BnAHK5xPlYv # JjU0aPjWaPohPLdbNbAsJY2B8AwMGbUTjSv+ORRWF6s97LTVD9WcAYHgOTCz6d2X # ZrArJ5msEQAFEySOLmBqTcuyW3t4w8XeII+B09HZIS8Gn3F9kX5+4JCw9E4sX8fS # n9ayclMmrXCPbkGA4bfwJp3KI1Tc/WXNRyG0AmPEmepid7ECr5tVvQoXRMF1Sy/D # 10qbHEcmQXvZDy85M2ED1niOac4oU+EY8Wvjzkgc36uXcjqf0jIUfw56cwGSNVkW # MhPXSMiH4tEjgxmtzld3LeA6TGfrFcCvRXYiCuYWHjBS3gptlqY6Q0580vxoQVXL # lTYui57LB1YStNLcLG9toP0d4/fRfeqEx7ddCQKlopnW/K392eoJo0aYoVGVJhIC # 3QhN525EFUwMm4FDpdSW29Gfbk/ytpf0u4hQ6JPeBl8psirRKqCGuwr5NOnPYTaN # yErlsq2eL83t9kLo+2YIqgWic85wNP3kqAjIaE6lminqX7sWFH3V1g9HqUQZVG1g # msatZMiCCvwSFuz3DPkSfnuhqwaHuhvCATZloCtguCmnbUK9qUVVzvodKw62sZrd # GdS2XvRNyoOwezz0tDEvPipyZ7RpcaatryHNuzGwRsE5Lvr73dg= # =ExnJ # -----END PGP SIGNATURE----- # gpg: Signature made Thu 02 Mar 2023 13:03:48 GMT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * tag 'pull-aspeed-20230302' of https://github.com/legoater/qemu: aspeed/smc: Replace SysBus IRQs with GPIO lines aspeed: Add a boot_rom overlap region in the SoC spi_boot container aspeed: Introduce a spi_boot region under the SoC aspeed/fuji : correct the eeprom size hw/at24c : modify at24c to support 1 byte address mode hw/arm/aspeed: Adding new machine Tiogapass in QEMU hw/arm/aspeed: Adding new machine Yosemitev2 in QEMU tests/avocado/machine_aspeed.py: Add an I2C slave test hw/misc: add a toy i2c echo device hw/i2c: only schedule pending master when bus is idle readline: fix hmp completion issue Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-03-02smmu: switch to use memory_region_unmap_iommu_notifier_range()Jason Wang
Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230223065924.42503-5-jasowang@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-02aspeed/smc: Replace SysBus IRQs with GPIO linesCédric Le Goater
It's cleaner and removes the curious '+ 1' required to skip the DMA IRQ line of the controller. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-03-02aspeed: Add a boot_rom overlap region in the SoC spi_boot containerCédric Le Goater
To avoid the SPI transactions fetching instructions from the FMC CE0 flash device and speed up boot, a ROM can be created if a drive is available. Reverse the logic to allow a machine to boot without a drive, using a block device instead : -blockdev node-name=fmc0,driver=file,filename=/path/to/flash.img \ -device mx66u51235f,bus=ssi.0,drive=fmc0 Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-03-02aspeed: Introduce a spi_boot region under the SoCCédric Le Goater
The default boot address of the Aspeed SoCs is 0x0. For this reason, the FMC flash device contents are remapped by HW on the first 256MB of the address space. In QEMU, this is currently done in the machine init with the setup of a region alias. Move this code to the SoC and introduce an extra container to prepare ground for the boot ROM region which will overlap the FMC flash remapping. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-03-02aspeed/fuji : correct the eeprom sizeSittisak Sinprem
Device 24C64 the size is 64 kilobits = 8kilobyte Device 24C02 the size is 2 kilobits = 256byte Signed-off-by: Sittisak Sinprem <ssinprem@celestica.com> Reviewed-by: Peter Delevoryas <peter@pjd.dev> [ clg: checkpatch issues ] Message-Id: <167660539263.10409.9736070122710923479-2@git.sr.ht> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-03-02hw/arm/aspeed: Adding new machine Tiogapass in QEMUKarthikeyan Pasupathi
This patch support Tiogapass in QEMU environment. and introduced EEPROM BMC FRU data support "add tiogapass_bmc_fruid data" along with the machine support. Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> [ clg: - commit log topic update - checkpatch issues - Documentation update ] Message-Id: <20230216184342.253868-1-pkarthikeyan1509@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-03-02hw/arm/aspeed: Adding new machine Yosemitev2 in QEMUKarthikeyan Pasupathi
This patch support Yosemitev2 in QEMU environment. and introduced EEPROM BMC FRU data support "add fbyv2_bmc_fruid data" along with the machine support. Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> [ clg: - commit log topic update - Documentation update ] Message-Id: <20230216133326.216017-1-pkarthikeyan1509@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-27hw/ide: Rename ide_create_drive() -> ide_bus_create_drive()Philippe Mathieu-Daudé
ide_create_drive() operates on a IDEBus; rename it as ide_bus_create_drive() to emphasize its first argument is a IDEBus. Mechanical change using: $ sed -i -e 's/ide_create_drive/ide_bus_create_drive/g' \ $(git grep -wl ide_create_drive) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230215112712.23110-12-philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-02-27hw: Replace qemu_or_irq typedef by OrIRQStatePhilippe Mathieu-Daudé
OBJECT_DECLARE_SIMPLE_TYPE() macro provides the OrIRQState declaration for free. Besides, the QOM code style is to use the structure name as typedef, and QEMU style is to use Camel Case, so rename qemu_or_irq as OrIRQState. Mechanical change using: $ sed -i -e 's/qemu_or_irq/OrIRQState/g' $(git grep -l qemu_or_irq) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20230113200138.52869-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-27hw/arm/musicpal: Remove unused dummy MemoryRegionPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-27hw/char/cmsdk-apb-uart: Open-code cmsdk_apb_uart_create()Philippe Mathieu-Daudé
cmsdk_apb_uart_create() is only used twice in the same file. Open-code it. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230220115114.25237-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-27hw/char/pl011: Open-code pl011_luminary_create()Philippe Mathieu-Daudé
pl011_luminary_create() is only used for the Stellaris board, open-code it. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230220115114.25237-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-27target/arm: Wrap arm_rebuild_hflags calls with tcg_enabledFabiano Rosas
This is in preparation to moving the hflags code into its own file under the tcg/ directory. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-27include/hw/arm/allwinner-a10.h: Remove superfluous includes from the headerThomas Huth
pci_device.h is not needed at all in allwinner-a10.h, and serial.h is only needed by the corresponding .c file. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20230215152233.210024-1-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-16target/arm: Use "max" as default cpu for the virt machine with KVMFabiano Rosas
Now that the cortex-a15 is under CONFIG_TCG, use as default CPU for a KVM-only build the 'max' cpu. Note that we cannot use 'host' here because the qtests can run without any other accelerator (than qtest) and 'host' depends on KVM being enabled. Signed-off-by: Fabiano Rosas <farosas@suse.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-16hw/arm/smmu-common: Fix TTB1 handlingJean-Philippe Brucker
Addresses targeting the second translation table (TTB1) in the SMMU have all upper bits set (except for the top byte when TBI is enabled). Fix the TTB1 check. Reported-by: Ola Hugosson <ola.hugosson@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20230214171921.1917916-3-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-16hw/arm/smmu-common: Support 64-bit addressesJean-Philippe Brucker
Addresses targeting the second translation table (TTB1) in the SMMU have all upper bits set. Ensure the IOMMU region covers all 64 bits. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230214171921.1917916-2-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-16hw/arm: Attach PSPI module to NPCM7XX SoCHao Wu
Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Titus Rwantare <titusr@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-4-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-16arm/virt: don't try to spell out the acceleratorCornelia Huck
Just use current_accel_name() directly. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-16hw/arm: Add missing XLNX_ZYNQMP_ARM -> USB_DWC3 Kconfig dependencyPhilippe Mathieu-Daudé
Since commit acc0b8b05a when running the ZynqMP ZCU102 board with a QEMU configured using --without-default-devices, we get: $ qemu-system-aarch64 -M xlnx-zcu102 qemu-system-aarch64: missing object type 'usb_dwc3' Abort trap: 6 Fix by adding the missing Kconfig dependency. Fixes: acc0b8b05a ("hw/arm/xlnx-zynqmp: Connect ZynqMP's USB controllers") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230216092327.2203-1-philmd@linaro.org Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-16hw/arm/smmuv3: Add GBPA registerMostafa Saleh
GBPA register can be used to globally abort all transactions. It is described in the SMMU manual in "6.3.14 SMMU_GBPA". ABORT reset value is IMPLEMENTATION DEFINED, it is chosen to be zero(Do not abort incoming transactions). Other fields have default values of Use Incoming. If UPDATE is not set, the write is ignored. This is the only permitted behavior in SMMUv3.2 and later.(6.3.14.1 Update procedure) As this patch adds a new state to the SMMU (GBPA), it is added in a new subsection for forward migration compatibility. GBPA is only migrated if its value is different from the reset value. It does this to be backward migration compatible if SW didn't write the register. Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230214094009.2445653-1-smostafa@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-08Drop duplicate #includeMarkus Armbruster
Tracked down with the help of scripts/clean-includes. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20230202133830.2152150-21-armbru@redhat.com>
2023-02-07hw/arm/aspeed_ast10x0: Add TODO comment to use Cortex-M4FPhilippe Mathieu-Daudé
This SoC uses a Cortex-M4F. QEMU only implements a M4, which is good enough. Add a TODO note in case the M4F is added. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm/aspeed_ast10x0: Map HACE peripheralPhilippe Mathieu-Daudé
Since I don't have access to the datasheet, the relevant values were found in: https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/dts/arm/aspeed/ast10x0.dtsi Before on Zephyr: uart:~$ hash test sha256_test tv[0]:hash_final error sha384_test tv[0]:hash_final error sha512_test tv[0]:hash_final error [00:00:06.278,000] <err> hace_global: HACE poll timeout [00:00:09.324,000] <err> hace_global: HACE poll timeout [00:00:12.261,000] <err> hace_global: HACE poll timeout uart:~$ crypto aes256_cbc_vault aes256_cbc vault key 1 [00:00:06.699,000] <inf> hace_global: aspeed_crypto_session_setup [00:00:06.699,000] <inf> hace_global: data->cmd: 1c2098 [00:00:06.699,000] <inf> hace_global: crypto_data_src: 93340 [00:00:06.699,000] <inf> hace_global: crypto_data_dst: 93348 [00:00:06.699,000] <inf> hace_global: crypto_ctx_base: 93300 [00:00:06.699,000] <inf> hace_global: crypto_data_len: 80000040 [00:00:06.699,000] <inf> hace_global: crypto_cmd_reg: 11c2098 [00:00:09.743,000] <inf> hace_global: HACE_STS: 0 [00:00:09.743,000] <err> hace_global: HACE poll timeout [00:00:09.743,000] <err> crypto: CBC mode ENCRYPT - Failed [00:00:09.743,000] <inf> hace_global: aspeed_crypto_session_free uart:~$ After: uart:~$ hash test sha256_test tv[0]:PASS tv[1]:PASS tv[2]:PASS tv[3]:PASS tv[4]:PASS sha384_test tv[0]:PASS tv[1]:PASS tv[2]:PASS tv[3]:PASS tv[4]:PASS tv[5]:PASS sha512_test tv[0]:PASS tv[1]:PASS tv[2]:PASS tv[3]:PASS tv[4]:PASS tv[5]:PASS uart:~$ crypto aes256_cbc_vault aes256_cbc vault key 1 Was waiting for: 6b c1 be e2 2e 40 9f 96 e9 3d 7e 11 73 93 17 2a ae 2d 8a 57 1e 03 ac 9c 9e b7 6f ac 45 af 8e 51 30 c8 1c 46 a3 5c e4 11 e5 fb c1 19 1a 0a 52 ef f6 9f 24 45 df 4f 9b 17 ad 2b 41 7b e6 6c 37 10 But got: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [00:00:05.771,000] <inf> hace_global: aspeed_crypto_session_setup [00:00:05.772,000] <inf> hace_global: data->cmd: 1c2098 [00:00:05.772,000] <inf> hace_global: crypto_data_src: 93340 [00:00:05.772,000] <inf> hace_global: crypto_data_dst: 93348 [00:00:05.772,000] <inf> hace_global: crypto_ctx_base: 93300 [00:00:05.772,000] <inf> hace_global: crypto_data_len: 80000040 [00:00:05.772,000] <inf> hace_global: crypto_cmd_reg: 11c2098 [00:00:05.772,000] <inf> hace_global: HACE_STS: 1000 [00:00:05.772,000] <inf> crypto: Output length (encryption): 80 [00:00:05.772,000] <inf> hace_global: aspeed_crypto_session_free [00:00:05.772,000] <inf> hace_global: aspeed_crypto_session_setup [00:00:05.772,000] <inf> hace_global: data->cmd: 1c2018 [00:00:05.772,000] <inf> hace_global: crypto_data_src: 93340 [00:00:05.772,000] <inf> hace_global: crypto_data_dst: 93348 [00:00:05.772,000] <inf> hace_global: crypto_ctx_base: 93300 [00:00:05.772,000] <inf> hace_global: crypto_data_len: 80000040 [00:00:05.772,000] <inf> hace_global: crypto_cmd_reg: 11c2018 [00:00:05.772,000] <inf> hace_global: HACE_STS: 1000 [00:00:05.772,000] <inf> crypto: Output length (decryption): 64 [00:00:05.772,000] <err> crypto: CBC mode DECRYPT - Mismatch between plaintext and decrypted cipher text [00:00:05.774,000] <inf> hace_global: aspeed_crypto_session_free uart:~$ Reviewed-by: Peter Delevoryas <peter@pjd.dev> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm/aspeed_ast10x0: Map the secure SRAMPhilippe Mathieu-Daudé
Some SRAM appears to be used by the Secure Boot unit and crypto accelerators. Name it 'secure sram'. Note, the SRAM base address was already present but unused (the 'SBC' index is used for the MMIO peripheral). Interestingly using CFLAGS=-Winitializer-overrides reports: ../hw/arm/aspeed_ast10x0.c:32:30: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides] [ASPEED_DEV_SBC] = 0x7E6F2000, ^~~~~~~~~~ ../hw/arm/aspeed_ast10x0.c:24:30: note: previous initialization is here [ASPEED_DEV_SBC] = 0x79000000, ^~~~~~~~~~ This fixes with Zephyr: uart:~$ rsa test rsa test vector[0]: [00:00:26.156,000] <err> os: ***** BUS FAULT ***** [00:00:26.157,000] <err> os: Precise data bus error [00:00:26.157,000] <err> os: BFAR Address: 0x79000000 [00:00:26.158,000] <err> os: r0/a1: 0x79000000 r1/a2: 0x00000000 r2/a3: 0x00001800 [00:00:26.158,000] <err> os: r3/a4: 0x79001800 r12/ip: 0x00000800 r14/lr: 0x0001098d [00:00:26.158,000] <err> os: xpsr: 0x81000000 [00:00:26.158,000] <err> os: Faulting instruction address (r15/pc): 0x0001e1bc [00:00:26.158,000] <err> os: >>> ZEPHYR FATAL ERROR 0: CPU exception on CPU 0 [00:00:26.158,000] <err> os: Current thread: 0x38248 (shell_uart) [00:00:26.165,000] <err> os: Halting system Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Delevoryas <peter@pjd.dev> [ clg: Fixed size of Secure Boot Controller Memory ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm/aspeed_ast10x0: Map I3C peripheralPhilippe Mathieu-Daudé
Since I don't have access to the datasheet, the relevant values were found in: https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/dts/arm/aspeed/ast10x0.dtsi Reviewed-by: Peter Delevoryas <peter@pjd.dev> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm/aspeed_ast10x0: Add various unimplemented peripheralsPhilippe Mathieu-Daudé
Based on booting Zephyr demo from [1] running QEMU with '-d unimp' and checking missing devices in [2]. [1] https://github.com/AspeedTech-BMC/zephyr/releases/tag/v00.01.07 [2] https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/dts/arm/aspeed/ast10x0.dtsi Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/watchdog/wdt_aspeed: Rename MMIO region size as 'iosize'Philippe Mathieu-Daudé
Avoid confusing two different things: - the WDT I/O region size ('iosize') - at which offset the SoC map the WDT ('offset') While it is often the same, we can map smaller region sizes at larger offsets. Here we are interested in the I/O region size, so rename as 'iosize'. Reviewed-by: Peter Delevoryas <peter@pjd.dev> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> [ clg: Introduced temporary wdt_offset variable ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm/aspeed: Add aspeed_eeprom.cPeter Delevoryas
- Create aspeed_eeprom.c and aspeed_eeprom.h - Include aspeed_eeprom.c in CONFIG_ASPEED meson source files - Include aspeed_eeprom.h in aspeed.c - Add fby35_bmc_fruid data - Use new at24c_eeprom_init_rom helper to initialize BMC FRUID EEPROM with data from aspeed_eeprom.c wget https://github.com/facebook/openbmc/releases/download/openbmc-e2294ff5d31d/fby35.mtd qemu-system-aarch64 -machine fby35-bmc -nographic -mtdblock fby35.mtd ... user: root pass: 0penBmc ... root@bmc-oob:~# fruid-util bb FRU Information : Baseboard --------------- : ------------------ Chassis Type : Rack Mount Chassis Chassis Part Number : N/A Chassis Serial Number : N/A Board Mfg Date : Fri Jan 7 10:30:00 2022 Board Mfg : XXXXXX Board Product : Management Board wBMC Board Serial : XXXXXXXXXXXXX Board Part Number : XXXXXXXXXXXXXX Board FRU ID : 1.0 Board Custom Data 1 : XXXXXXXXX Board Custom Data 2 : XXXXXXXXXXXXXXXXXX Product Manufacturer : XXXXXX Product Name : Yosemite V3.5 EVT2 Product Part Number : XXXXXXXXXXXXXX Product Version : EVT2 Product Serial : XXXXXXXXXXXXX Product Asset Tag : XXXXXXX Product FRU ID : 1.0 Product Custom Data 1 : XXXXXXXXX Product Custom Data 2 : N/A root@bmc-oob:~# fruid-util bmc FRU Information : BMC --------------- : ------------------ Board Mfg Date : Mon Jan 10 21:42:00 2022 Board Mfg : XXXXXX Board Product : BMC Storage Module Board Serial : XXXXXXXXXXXXX Board Part Number : XXXXXXXXXXXXXX Board FRU ID : 1.0 Board Custom Data 1 : XXXXXXXXX Board Custom Data 2 : XXXXXXXXXXXXXXXXXX Product Manufacturer : XXXXXX Product Name : Yosemite V3.5 EVT2 Product Part Number : XXXXXXXXXXXXXX Product Version : EVT2 Product Serial : XXXXXXXXXXXXX Product Asset Tag : XXXXXXX Product FRU ID : 1.0 Product Custom Data 1 : XXXXXXXXX Product Custom Data 2 : Config A root@bmc-oob:~# fruid-util nic FRU Information : NIC --------------- : ------------------ Board Mfg Date : Tue Nov 2 08:51:00 2021 Board Mfg : XXXXXXXX Board Product : Mellanox ConnectX-6 DX OCP3.0 Board Serial : XXXXXXXXXXXXXXXXXXXXXXXX Board Part Number : XXXXXXXXXXXXXXXXXXXXX Board FRU ID : FRU Ver 0.02 Product Manufacturer : XXXXXXXX Product Name : Mellanox ConnectX-6 DX OCP3.0 Product Part Number : XXXXXXXXXXXXXXXXXXXXX Product Version : A9 Product Serial : XXXXXXXXXXXXXXXXXXXXXXXX Product Custom Data 3 : ConnectX-6 DX Signed-off-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Corey Minyard <cminyard@mvista.com> Link: https://lore.kernel.org/r/20230128060543.95582-5-peter@pjd.dev Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm/aspeed: Replace aspeed_eeprom_init with at24c_eeprom_initPeter Delevoryas
aspeed_eeprom_init is an exact copy of at24c_eeprom_init, not needed. Signed-off-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Corey Minyard <cminyard@mvista.com> Link: https://lore.kernel.org/r/20230128060543.95582-3-peter@pjd.dev Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07hw/arm: Extract at24c_eeprom_init helper from Aspeed and Nuvoton boardsPeter Delevoryas
This helper is useful in board initialization because lets users initialize and realize an EEPROM on an I2C bus with a single function call. Signed-off-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Corey Minyard <cminyard@mvista.com> Link: https://lore.kernel.org/r/20230128060543.95582-2-peter@pjd.dev Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07aspeed: Add Supermicro X11 SPI machine typeGuenter Roeck
supermicrox11-bmc is configured with ast2400-a1 SoC. This does not match the Supermicro documentation for X11 BMCs, and it does not match the devicetree file in the Linux kernel. As it turns out, some Supermicro X11 motherboards use AST2400 SoCs, while others use AST2500. Introduce new machine type supermicrox11-spi-bmc with AST2500 SoC to match the devicetree description in the Linux kernel. Hardware configuration details for this machine type are guesswork and taken from defaults as well as from the Linux kernel devicetree file. The new machine type was tested with aspeed-bmc-supermicro-x11spi.dts from the Linux kernel and with Linux versions 6.0.3 and 6.1-rc2. Linux booted successfully from initrd and from both SPI interfaces. Ethernet interfaces were confirmed to be operational. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Link: https://lore.kernel.org/r/20221025165109.1226001-1-linux@roeck-us.net [ clg: Renamed machine to 'supermicro-x11spi-bmc' ] Message-Id: <20221025165109.1226001-1-linux@roeck-us.net> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-07tests/avocado: Truncate M2S-FG484 SOM SPI flash to 16MiBPhilippe Mathieu-Daudé
The M2S-FG484 SOM uses a 16 MiB SPI flash (Spansion S25FL128SDPBHICO). Since the test asset is bigger, truncate it to the correct size to avoid when running the test_arm_emcraft_sf2 test: qemu-system-arm: device requires 16777216 bytes, block backend provides 67108864 bytes Add comment regarding the M2S-FG484 SOM hardware in hw/arm/msf2-som.c. Reported-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-02-03sbsa-ref: remove cortex-a76 from list of supported cpusMarcin Juszkiewicz
Cortex-A76 supports 40bits of address space. sbsa-ref's memory starts above this limit. Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230126114416.2447685-1-marcin.juszkiewicz@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-03hw/arm/virt: Make accels in GIC finalize logic explicitAlexander Graf
Let's explicitly list out all accelerators that we support when trying to determine the supported set of GIC versions. KVM was already separate, so the only missing one is HVF which simply reuses all of TCG's emulation code and thus has the same compatibility matrix. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221223090107.98888-3-agraf@csgraf.de [PMM: Added qtest to the list of accelerators] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-03hw/arm/virt: Consolidate GIC finalize logicAlexander Graf
Up to now, the finalize_gic_version() code open coded what is essentially a support bitmap match between host/emulation environment and desired target GIC type. This open coding leads to undesirable side effects. For example, a VM with KVM and -smp 10 will automatically choose GICv3 while the same command line with TCG will stay on GICv2 and fail the launch. This patch combines the TCG and KVM matching code paths by making everything a 2 pass process. First, we determine which GIC versions the current environment is able to support, then we go through a single state machine to determine which target GIC mode that means for us. After this patch, the only user noticable changes should be consolidated error messages as well as TCG -M virt supporting -smp > 8 automatically. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Message-id: 20221223090107.98888-2-agraf@csgraf.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-03hw/arm: Use TYPE_ARM_SMMUV3Richard Henderson
Use the macro instead of two explicit string literals. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230124232059.4017615-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-01 09:35:59 +0000