| Age | Commit message (Collapse) | Author |
|---|
|
Peter missed the Sphinx HMP document for the "resume/-r" flag in commit
7a4da28b26 ("qmp: hmp: add migrate "resume" option"). Add it.
When at it, slightly cleanup the lines around:
- Move "detach/-d" to a separate section rather than appending it at the
end of the command description. Add a hint for how to query the migration
results in detached mode.
- Add "postcopy" keyword to "resume/-r" help messages, as it only applies
to postcopy.
Cc: Dr. David Alan Gilbert <dave@treblig.org>
Cc: Fabiano Rosas <farosas@suse.de>
Fixes: 7a4da28b26 ("qmp: hmp: add migrate "resume" option")
Reported-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
|
|
The block migration is considered obsolete and has been deprecated in
8.2. Remove the migrate command option that enables it. This only
affects the QMP and HMP commands, the feature can still be accessed by
setting the migration 'block' capability. The whole feature will be
removed in a future patch.
Deprecation commit 8846b5bfca ("migration: migrate 'blk' command
option is deprecated.").
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
|
|
The block incremental option for block migration has been deprecated
in 8.2 in favor of using the block-mirror feature. Remove it now.
Deprecation commit 40101f320d ("migration: migrate 'inc' command
option is deprecated.").
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
|
|
virsh qemu-monitor-command --hmp help information of
watchdog_action missing inject-nmi which already supported
in Commit 795dc6e4
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2247
Signed-off-by: Dayu Liu <liu.dayu@zte.com.cn>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
[Mjt: decode and word-wrap commit message and add Resolves: tag]
|
|
This command has been deprecated before the 8.1 release,
in commit e9ccfdd91d ("hmp: Add 'one-insn-per-tb' command
equivalent to 'singlestep'"). Time to drop it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: "Dr. David Alan Gilbert" <dave@treblig.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240117151430.29235-3-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
We don't currently document the syntax of .hx files anywhere
except in a few comments at the top of individual .hx files.
We don't even have somewhere in the developer docs where we
could do this.
Add a new files docs/devel/docs.rst which can be a place to
document how our docs build process works. For the moment,
put in only a brief introductory paragraph and the documentation
of the .hx files. We could later add to this file by for
example describing how the QAPI-schema-to-docs process works,
or anything else that developers might need to know about
how to add documentation.
Make the .hx files refer to this doc file, and clean
up their header comments to be more accurate for the
usage in each file and less cut-n-pasted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-id: 20231212162313.1742462-1-peter.maydell@linaro.org
|
|
The command requires color conversion and line-by-line feeding. We could
have a simple fallback for simple formats though.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
|
|
The QMP dump API represents the dump format as an enumeration. Add three
new enumerators, one for each supported kdump compression, each named
"kdump-raw-*".
For the HMP command line, rather than adding a new flag corresponding to
each format, it seems more human-friendly to add a single flag "-R" to
switch the kdump formats to "raw" mode. The choice of "-R" also
correlates nicely to the "makedumpfile -R" option, which would serve to
reassemble a flattened vmcore.
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[ Marc-André: replace loff_t with off_t, indent fixes ]
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230918233233.1431858-4-stephen.s.brennan@oracle.com>
|
|
AF_XDP is a network socket family that allows communication directly
with the network device driver in the kernel, bypassing most or all
of the kernel networking stack. In the essence, the technology is
pretty similar to netmap. But, unlike netmap, AF_XDP is Linux-native
and works with any network interfaces without driver modifications.
Unlike vhost-based backends (kernel, user, vdpa), AF_XDP doesn't
require access to character devices or unix sockets. Only access to
the network interface itself is necessary.
This patch implements a network backend that communicates with the
kernel by creating an AF_XDP socket. A chunk of userspace memory
is shared between QEMU and the host kernel. 4 ring buffers (Tx, Rx,
Fill and Completion) are placed in that memory along with a pool of
memory buffers for the packet data. Data transmission is done by
allocating one of the buffers, copying packet data into it and
placing the pointer into Tx ring. After transmission, device will
return the buffer via Completion ring. On Rx, device will take
a buffer form a pre-populated Fill ring, write the packet data into
it and place the buffer into Rx ring.
AF_XDP network backend takes on the communication with the host
kernel and the network interface and forwards packets to/from the
peer device in QEMU.
Usage example:
-device virtio-net-pci,netdev=guest1,mac=00:16:35:AF:AA:5C
-netdev af-xdp,ifname=ens6f1np1,id=guest1,mode=native,queues=1
XDP program bridges the socket with a network interface. It can be
attached to the interface in 2 different modes:
1. skb - this mode should work for any interface and doesn't require
driver support. With a caveat of lower performance.
2. native - this does require support from the driver and allows to
bypass skb allocation in the kernel and potentially use
zero-copy while getting packets in/out userspace.
By default, QEMU will try to use native mode and fall back to skb.
Mode can be forced via 'mode' option. To force 'copy' even in native
mode, use 'force-copy=on' option. This might be useful if there is
some issue with the driver.
Option 'queues=N' allows to specify how many device queues should
be open. Note that all the queues that are not open are still
functional and can receive traffic, but it will not be delivered to
QEMU. So, the number of device queues should generally match the
QEMU configuration, unless the device is shared with something
else and the traffic re-direction to appropriate queues is correctly
configured on a device level (e.g. with ethtool -N).
'start-queue=M' option can be used to specify from which queue id
QEMU should start configuring 'N' queues. It might also be necessary
to use this option with certain NICs, e.g. MLX5 NICs. See the docs
for examples.
In a general case QEMU will need CAP_NET_ADMIN and CAP_SYS_ADMIN
or CAP_BPF capabilities in order to load default XSK/XDP programs to
the network interface and configure BPF maps. It is possible, however,
to run with no capabilities. For that to work, an external process
with enough capabilities will need to pre-load default XSK program,
create AF_XDP sockets and pass their file descriptors to QEMU process
on startup via 'sock-fds' option. Network backend will need to be
configured with 'inhibit=on' to avoid loading of the program.
QEMU will need 32 MB of locked memory (RLIMIT_MEMLOCK) per queue
or CAP_IPC_LOCK.
There are few performance challenges with the current network backends.
First is that they do not support IO threads. This means that data
path is handled by the main thread in QEMU and may slow down other
work or may be slowed down by some other work. This also means that
taking advantage of multi-queue is generally not possible today.
Another thing is that data path is going through the device emulation
code, which is not really optimized for performance. The fastest
"frontend" device is virtio-net. But it's not optimized for heavy
traffic either, because it expects such use-cases to be handled via
some implementation of vhost (user, kernel, vdpa). In practice, we
have virtio notifications and rcu lock/unlock on a per-packet basis
and not very efficient accesses to the guest memory. Communication
channels between backend and frontend devices do not allow passing
more than one packet at a time as well.
Some of these challenges can be avoided in the future by adding better
batching into device emulation or by implementing vhost-af-xdp variant.
There are also a few kernel limitations. AF_XDP sockets do not
support any kinds of checksum or segmentation offloading. Buffers
are limited to a page size (4K), i.e. MTU is limited. Multi-buffer
support implementation for AF_XDP is in progress, but not ready yet.
Also, transmission in all non-zero-copy modes is synchronous, i.e.
done in a syscall. That doesn't allow high packet rates on virtual
interfaces.
However, keeping in mind all of these challenges, current implementation
of the AF_XDP backend shows a decent performance while running on top
of a physical NIC with zero-copy support.
Test setup:
2 VMs running on 2 physical hosts connected via ConnectX6-Dx card.
Network backend is configured to open the NIC directly in native mode.
The driver supports zero-copy. NIC is configured to use 1 queue.
Inside a VM - iperf3 for basic TCP performance testing and dpdk-testpmd
for PPS testing.
iperf3 result:
TCP stream : 19.1 Gbps
dpdk-testpmd (single queue, single CPU core, 64 B packets) results:
Tx only : 3.4 Mpps
Rx only : 2.0 Mpps
L2 FWD Loopback : 1.5 Mpps
In skb mode the same setup shows much lower performance, similar to
the setup where pair of physical NICs is replaced with veth pair:
iperf3 result:
TCP stream : 9 Gbps
dpdk-testpmd (single queue, single CPU core, 64 B packets) results:
Tx only : 1.2 Mpps
Rx only : 1.0 Mpps
L2 FWD Loopback : 0.7 Mpps
Results in skb mode or over the veth are close to results of a tap
backend with vhost=on and disabled segmentation offloading bridged
with a NIC.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> (docker/lcitool)
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
We don't allow to use x-colo capability when replication is not
configured. So, no reason to build COLO when replication is disabled,
it's unusable in this case.
Note also that the check in migrate_caps_check() is not the only
restriction: some functions in migration/colo.c will just abort if
called with not defined CONFIG_REPLICATION, for example:
migration_iteration_finish()
case MIGRATION_STATUS_COLO:
migrate_start_colo_process()
colo_process_checkpoint()
abort()
It could probably make sense to have possibility to enable COLO without
REPLICATION, but this requires deeper audit of colo & replication code,
which may be done later if needed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230428194928.1426370-4-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
The 'singlestep' HMP command is confusing, because it doesn't
actually have anything to do with single-stepping the CPU. What it
does do is force TCG emulation to put one guest instruction in each
TB, which can be useful in some situations.
Create a new HMP command 'one-insn-per-tb', so we can document that
'singlestep' is just a deprecated synonym for it, and eventually
perhaps drop it.
We aren't obliged to do deprecate-and-drop for HMP commands,
but it's easy enough to do so, so we do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230417164041.684562-9-peter.maydell@linaro.org
|
|
Currently, the function will simply fail if ancillary fds are not
provided, for ex on unsupported platforms.
This changes the failure from:
{"error": {"class": "GenericError", "desc": "No file descriptor
supplied via SCM_RIGHTS"}}
to:
{"error": {"class": "CommandNotFound", "desc": "The command getfd
has not been found"}}
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
|
|
Specifically add listing, injection of event channels.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
|
|
This requires giving them external linkage. Rename do_help_cmd() to
hmp_help(), and do_print() to hmp_print().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-30-armbru@redhat.com>
|
|
Copied from socket netdev file and modified to use SocketAddress
to be able to introduce new features like unix socket.
"udp" and "mcast" are squashed into dgram netdev, multicast is detected
according to the IP address type.
"listen" and "connect" modes are managed by stream netdev. An optional
parameter "server" defines the mode (off by default)
The two new types need to be parsed the modern way with -netdev, because
with the traditional way, the "type" field of netdev structure collides with
the "type" field of SocketAddress and prevents the correct evaluation of the
command line option. Moreover the traditional way doesn't allow to use
the same type (SocketAddress) several times with the -netdev option
(needed to specify "local" and "remote" addresses).
The previous commit paved the way for parsing the modern way, but
omitted one detail: how to pick modern vs. traditional, in
netdev_is_modern().
We want to pick based on the value of parameter "type". But how to
extract it from the option argument?
Parsing the option argument, either the modern or the traditional way,
extracts it for us, but only if parsing succeeds.
If parsing fails, there is no good option. No matter which parser we
pick, it'll be the wrong one for some arguments, and the error
reporting will be confusing.
Fortunately, the traditional parser accepts *anything* when called in
a certain way. This maximizes our chance to extract the value of
"type", and in turn minimizes the risk of confusing error reporting.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
To save the FDT blob we have the '-machine dumpdtb=<file>' property.
With this property set, the machine saves the FDT in <file> and exit.
The created file can then be converted to plain text dts format using
'dtc'.
There's nothing particularly sophisticated into saving the FDT that
can't be done with the machine at any state, as long as the machine has
a valid FDT to be saved.
The 'dumpdtb' command receives a 'filename' parameter and, if the FDT is
available via current_machine->fdt, save it in dtb format to 'filename'.
In short, this is a '-machine dumpdtb' that can be fired on demand via
QMP/HMP.
This command will always be executed in-band (i.e. holding BQL),
avoiding potential race conditions with machines that might change the
FDT during runtime (e.g. PowerPC 'pseries' machine).
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-2-danielhb413@gmail.com>
|
|
Fix the ordering of the help text so it's always after the commands
being defined. A few had got out of order. Keep 'info' at the end.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Implement dirtyrate calculation periodically basing on
dirty-ring and throttle virtual CPU until it reachs the quota
dirty page rate given by user.
Introduce qmp commands "set-vcpu-dirty-limit",
"cancel-vcpu-dirty-limit", "query-vcpu-dirty-limit"
to enable, disable, query dirty page limit for virtual CPU.
Meanwhile, introduce corresponding hmp commands
"set_vcpu_dirty_limit", "cancel_vcpu_dirty_limit",
"info vcpu_dirty_limit" so the feature can be more usable.
"query-vcpu-dirty-limit" success depends on enabling dirty
page rate limit, so just add it to the list of skipped
command to ensure qmp-cmd-test run successfully.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <4143f26706d413dd29db0b672fe58b3d3fbe34bc.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Of the block device commands, those that are available outside system
emulators do not require a fully constructed machine by definition.
Allow running them before machine initialization has concluded.
Of the ones that are available inside system emulation, allow querying
the PR managers, and setting up accounting and throttling.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Update HMP for supporting vmnet.
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Tested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Vladislav Yaroshchuk <Vladislav.Yaroshchuk@jetbrains.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
staging
vnc: add display-update monitor command.
screendump: add png support.
vmsvga: screen update fix.
i386: sev setup for -bios loaded firmware
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmJpfYUACgkQTLbY7tPo
# cTg6ChAAn5EWtNwmVbfbVzRTu0kqdx7QXyK6FFgTgXrsrmBCWzJhHDraYa9cMOZU
# wBlU/Rutuv9ETvtRTRic3t0qcdRmvZjpHuA/3agBMJY7xpEQbQ8NwVdSRZTOZo0i
# hXzWEAnxviEv8F/W1TXwB5d2Q9sWlJ2yO8SvcxTfAEK7hOSFrWypp3XRKr5WBHjO
# DFTtwqTk9MRNsgsfnpEHNGDb30JPTqKZKRbDal15NDR9fQz+iCq3FIv/FpBaUfys
# v9GA2zNT324MvhR64xNblaujCn2XFOsFvDY4nGDrfbKGJch8ltAg5t4G1CCZqOn7
# NIiwodC0508sAv9xUm+qvh+oHyf11EFdcAMWYimrExY2I51XOEDnJip/SAdogo5u
# h7LyLkZTEG5tyc+a4PGIcC216ecDDNytMnJM9nh9YK3p5UiBOgcHV2wWDdzJbsdS
# GRoP0fzF/MBQd985HBCF2vtQVk4AbQA7atZ8FKp1ZsHr3sFfs+vd0xyItsDMinBP
# k/eKOOKbHRgXcdIocw4PK16yURrMo5IUGCGGiG9waqYz+VDyHhtikBAzQvYYdnqN
# NaZttCcEieIk4XNd+wCfI0GQLtOY/AP1k8TV0rCaDTnO6nOxJ/uP64IaCzxzCT10
# b8VRdCfYDGjd2C14XYKmTzBRPM4hVrf9bo7FtXVtmSksTG+eIao=
# =yaxh
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 27 Apr 2022 10:29:41 AM PDT
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [undefined]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [undefined]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* tag 'kraxel-20220427-pull-request' of git://git.kraxel.org/qemu:
i386: firmware parsing and sev setup for -bios loaded firmware
i386: factor out x86_firmware_configure()
i386: move bios load error message
avocado/vnc: add test_change_listen
qapi/ui: add 'display-update' command for changing listen address
ui/vnc: refactor arrays of addresses to SocketAddressList
Added parameter to take screenshot with screendump as PNG
Replacing CONFIG_VNC_PNG with CONFIG_PNG
hw/display/vmware_vga: do not discard screen updates
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Currently screendump only supports PPM format, which is un-compressed. Added
a "format" parameter to QMP and HMP screendump command to support PNG image
capture using libpng.
QMP example usage:
{ "execute": "screendump", "arguments": { "filename": "/tmp/image",
"format":"png" } }
HMP example usage:
screendump /tmp/image -f png
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/718
Signed-off-by: Kshitij Suri <kshitij.suri@nutanix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220408071336.99839-3-kshitij.suri@nutanix.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
'blockdev-change-medium' is a convinient wrapper for the following
sequence of commands:
* blockdev-open-tray
* blockdev-remove-medium
* blockdev-insert-medium
* blockdev-close-tray
and should be used f.e. to change ISO image inside the CD-ROM tray.
Though the guest could lock the tray and some linux guests like
CentOS 8.5 actually does that. In this case the execution if this
command results in the error like the following:
Device 'scsi0-0-1-0' is locked and force was not specified,
wait for tray to open and try again.
This situation is could be resolved 'blockdev-open-tray' by passing
flag 'force' inside. Thus is seems reasonable to add the same
capability for 'blockdev-change-medium' too.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Acked-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220412221846.280723-1-den@openvz.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
|
|
Before this patch, 'dump-guest-memory -w' was accepting only 64-bit
dump header provided by guest through vmcoreinfo and thus was unable
to produce 32-bit guest Windows dump. So, add 32-bit guest Windows
dumping support.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[ misc error handling fixes to avoid compiler warning ]
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220406171558.199263-5-viktor.prutyanov@redhat.com>
|
|
It is possible to specify more than one VNC server on the command line,
either with an explicit ID or the auto-generated ones à la "default",
"vnc2", "vnc3", ...
It is not possible to change the password on one of these extra VNC
displays though. Fix this by adding a "display" parameter to the
"set_password" and "expire_password" QMP and HMP commands.
For HMP, the display is specified using the "-d" value flag.
For QMP, the schema is updated to explicitly express the supported
variants of the commands with protocol-discriminated unions.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
[FE: update "Since: " from 6.2 to 7.0
make @connected a common member of @SetPasswordOptions]
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Message-Id: <20220225084949.35746-4-f.ebner@proxmox.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Some commands such as quit or cont have one letter alternatives but
stop is missing that. Add stop|s to match cont|c for consistency and
convenience.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20211030095225.513D4748F48@zero.eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
introduce dirty-bitmap mode as the third method of calc-dirty-rate.
implement dirty-bitmap dirtyrate calculation, which can be used
to measuring dirtyrate in the absence of dirty-ring.
introduce "dirty_bitmap:-b" option in hmp calc_dirty_rate to
indicate dirty bitmap method should be used for calculation.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
use dirty ring feature to implement dirtyrate calculation.
introduce mode option in qmp calc_dirty_rate to specify what
method should be used when calculating dirtyrate, either
page-sampling or dirty-ring should be passed.
introduce "dirty_ring:-r" option in hmp calc_dirty_rate to
indicate dirty ring method should be used for calculation.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <7db445109bd18125ce8ec86816d14f6ab5de6a7d.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210909081219.308065-3-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
Creating and destroying network backend does not require a fully
constructed machine. Allow the related monitor commands to run before
machine initialization has concluded.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
These two commands are missing when adding the QMP sister commands.
Add them, so developers can play with them easier.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <4cc0039fc3ad6145136770cf3b0f056c09a2910b.1623027729.git.huangy81@chinatelecom.cn>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
staging
* submodule cleanups (Philippe, myself)
* tiny step towards a usable preconfig mode (myself)
* Kconfig and LOCK_GUARD cleanups (philippe)
* new x86 CPUID feature (Yang Zhong)
* "-object qtest" support (myself)
* Dirty ring support for KVM (Peter)
* Fixes for 6.0 command line parsing breakage (myself)
* Fix for macOS 11.3 SDK (Katsuhiro)
# gpg: Signature made Wed 26 May 2021 13:50:12 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream: (28 commits)
gitlab-ci: use --meson=git for CFI jobs
hw/scsi: Fix sector translation bug in scsi_unmap_complete_noio
configure: Avoid error messages about missing *-config-*.h files
doc: Add notes about -mon option mode=control argument.
qemu-config: load modules when instantiating option groups
vl: allow not specifying size in -m when using -M memory-backend
replication: move include out of root directory
remove qemu-options* from root directory
meson: Set implicit_include_directories to false
tests/qtest/fuzz: Fix build failure
KVM: Dirty ring support
KVM: Disable manual dirty log when dirty ring enabled
KVM: Add dirty-ring-size property
KVM: Cache kvm slot dirty bitmap size
KVM: Simplify dirty log sync in kvm_set_phys_mem
KVM: Provide helper to sync dirty bitmap from slot to ramblock
KVM: Provide helper to get kvm dirty log
KVM: Create the KVMSlot dirty bitmap on flag changes
KVM: Use a big lock to replace per-kml slots_lock
memory: Introduce log_sync_global() to memory listener
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Creating and destroying QOM objects does not require a fully constructed
machine. Allow running object-add and object-del before machine
initialization has concluded.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is not a 32 bit number, it can (and most likely will) be quite a
big one.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210520174303.12310-7-alex.bennee@linaro.org>
|
|
Command block_passwd always fails since
Commit c01c214b69 "block: remove all encryption handling APIs"
(v2.10.0) turned block_passwd into a stub that always fails, and
hardcoded encryption_key_missing to false in query-named-block-nodes
and query-block.
Commit ad1324e044 "block: remove 'encryption_key_missing' flag from
QAPI" just landed. Complete the cleanup job: remove block_passwd.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323101951.3686029-1-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
This switches the HMP command object_add from a QemuOpts-based parser to
user_creatable_add_from_str() which uses a keyval parser and enforces
the QAPI schema.
Apart from being a cleanup, this makes non-scalar properties and help
accessible. In order for help to be printed to the monitor instead of
stdout, the printf() calls in the help functions are changed to
qemu_printf().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
The generic 'migrate_set_parameters' command handle all types of param.
Only the QMP commands were documented in the deprecations page, but the
rationale for deprecating applies equally to HMP, and the replacements
exist. Furthermore the HMP commands are just shims to the QMP commands,
so removing the latter breaks the former unless they get re-implemented.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
The VNC ACL concept has been replaced by the pluggable "authz" framework
which does not use monitor commands.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
The HMP command \"change vnc TARGET\" is messy:
- it takes an ugly shortcut to determine if the option has an "id",
with incorrect results if "id=" is not preceded by an unescaped
comma.
- it deletes the existing QemuOpts and does not try to rollback
if the parsing fails (which is not causing problems, but only due to
how VNC options are parsed)
- because it uses the same parsing function as "-vnc", it forces
the latter to not support "-vnc help".
On top of this, it uses a deprecated QMP command, thus getting in
the way of removing the QMP command. Since the usecase for the
command is not clear, just remove it and send "change vnc password"
directly to the QMP "change-vnc-password" command.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210120144235.345983-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We have four HMP commands which have a single-character abbreviated
version: cont ('c'), quit ('q'), print ('p') and help ('h'). For
cont, quit and print, we list the abbreviation first in the help
documentation and the command name. This has the odd effect that in
the full 'help' command list these commands end up sorted out of
alphabetical order (they end up after all the other commands that
start with the same letter). As it happens, the only place this
currently changes the order is for 'cont'.
Abbreviation first is also not a very logical order, and it doesn't
match what we use for 'help' (which is 'help|?'). Put the full
command name first in both the help text and the .name field for
cont, quit and print.
Fixes: https://bugs.launchpad.net/qemu/+bug/1614609
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201121151711.20783-1-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is an interesting typo in the help message of pcie_aer_inject_error
command. Use 'tlp' instead of 'tlb' to match the PCIe AER term.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-Id: <20201204030953.837-1-yuzenghui@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Thanks to the monitors' coroutine support (merge commit b7092cda1b3),
the screendump handler can trigger a graphic_hw_update(), yield and let
the main loop run until update is done. Then the handler is resumed, and
ppm_save() will write the screen image to disk in the coroutine context.
The IO is still blocking though, as the file is set blocking so far,
this could be addressed by some future change (with other caveats).
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1230527
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20201027133602.3038018-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
block_resize performs some I/O that could potentially take quite some
time, so use it as an example for the new 'coroutine': true annotation
in the QAPI schema.
bdrv_truncate() requires that we're already in the right AioContext for
the BlockDriverState if called in coroutine context. So instead of just
taking the AioContext lock, move the QMP handler coroutine to the
context.
Call blk_unref() only after switching back because blk_unref() may only
be called in the main thread.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-15-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
This patch adds hmp/qmp commands replay_seek/replay-seek that proceed
the execution to the specified instruction count.
The command automatically loads nearest snapshot and replays the execution
to find the desired instruction count.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
--
v4 changes:
- fixed HMP command description indent
- removed useless error_free call
Message-Id: <160174521180.12451.14033112911009278753.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch introduces replay_break, replay_delete_break
qmp and hmp commands.
These commands allow stopping at the specified instruction.
It may be useful for debugging when there are some known
events that should be investigated.
replay_break command has one argument - number of instructions
executed since the start of the replay.
replay_delete_break removes previously set breakpoint.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
--
v4 changes:
- removed useless error_free call
Message-Id: <160174520606.12451.7056879546045599378.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
These were deprecated since 4.0, remove both HMP and QMP variants.
Users should use device_add command instead. To get list of
possible CPUs and options, use 'info hotpluggable-cpus' HMP
or query-hotpluggable-cpus QMP command.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200915120403.1074579-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Alex Bennee <alex.bennee@linaro.org>
Message-Id: <20200917075029.313-2-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
Commit 7d2ef6dcc1cf ("hmp: Simplify qom-set") switched to the json
parser, making it possible to specify complex types. However, with this
change it is no longer possible to specify proper sizes (e.g., 2G, 128M),
turning the interface harder to use for properties that consume sizes.
Let's switch back to the previous handling and allow to specify passing
json via the "-j" parameter.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200610075153.33892-1-david@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Simplify qom_set by making it use qmp_qom_set and the JSON parser.
(qemu) qom-get /machine smm
"auto"
(qemu) qom-set /machine smm "auto"
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200520151108.160598-3-dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
With 's'->'S' type change suggested by Paolo and Markus
|
