Age | Commit message (Collapse) | Author |
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
No functional change.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Commit 360e607 (address_space_translate: do not cross page boundaries,
2014-01-30) broke MMIO accesses in cases where the section is shorter
than the full register width. This can happen for example with the
Bochs DISPI registers, which are 16 bits wide but have only a 1-byte
long MemoryRegion (if you write to the "second byte" of the register
your access is discarded; it doesn't write only to half of the register).
Restrict the action of commit 360e607 to direct RAM accesses. This
is enough for Xen, since MMIO will not go through the mapcache.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The following commit:
commit 149f54b53b7666a3facd45e86eece60ce7d3b114
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Fri May 24 12:59:37 2013 +0200
memory: add address_space_translate
breaks Xen support in QEMU, in particular the Xen mapcache. The effect
is that one Windows XP installation out of ten would end up with BSOD.
The reason is that after this commit l in address_space_rw can span a
page boundary, however qemu_get_ram_ptr still calls xen_map_cache asking
to map a single page (if block->offset == 0).
Fix the issue by reverting to the previous behaviour: do not return a
length from address_space_translate_internal that can span a page
boundary.
Also in address_space_translate do not ignore the length returned by
address_space_translate_internal.
This patch should be backported to QEMU 1.6.x.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Perard <anthony.perard@citrix.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
|
|
* qemu-kvm/uq/master:
kvm: always update the MPX model specific register
KVM: fix addr type for KVM_IOEVENTFD
KVM: Retry KVM_CREATE_VM on EINTR
mempath prefault: fix off-by-one error
kvm: x86: Separately write feature control MSR on reset
roms: Flush icache when writing roms to guest memory
target-i386: clear guest TSC on reset
target-i386: do not special case TSC writeback
target-i386: Intel MPX
Conflicts:
exec.c
aliguori: fix trivial merge conflict in exec.c
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
All the functions that use ram_addr_t should be here.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
|
|
Result was always 0, and not used anywhere. Once there, use bool type
for the parameter.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
|
|
We have an end parameter in all the callers, and this make it coherent
with the rest of cpu_physical_memory_* functions, that also take a
length parameter.
Once here, move the start/end calculation to
tlb_reset_dirty_range_all() as we don't need it here anymore.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
|
|
All uses except one really want the other meaning.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
|
|
Now all functions use the same wording that bitops/bitmap operations
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
|
|
After all the previous patches, spliting the bitmap gets direct.
Note: For some reason, I have to move DIRTY_MEMORY_* definitions to
the beginning of memory.h to make compilation work.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
|
|
Document it
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
|
|
So remove the flag argument and do it directly. After this change,
there is nothing else using cpu_physical_memory_set_dirty_flags() so
remove it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Fix off-by-one error (noticed by Andrea Arcangeli).
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
We use the rom infrastructure to write firmware and/or initial kernel
blobs into guest address space. So we're basically emulating the cache
off phase on very early system bootup.
That phase is usually responsible for clearing the instruction cache for
anything it writes into cachable memory, to ensure that after reboot we
don't happen to execute stale bits from the instruction cache.
So we need to invalidate the icache every time we write a rom into guest
address space. We do not need to do this for every DMA since the guest
expects it has to flush the icache manually in that case.
This fixes random reboot issues on e5500 (booke ppc) for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
We use the rom infrastructure to write firmware and/or initial kernel
blobs into guest address space. So we're basically emulating the cache
off phase on very early system bootup.
That phase is usually responsible for clearing the instruction cache for
anything it writes into cachable memory, to ensure that after reboot we
don't happen to execute stale bits from the instruction cache.
So we need to invalidate the icache every time we write a rom into guest
address space. We do not need to do this for every DMA since the guest
expects it has to flush the icache manually in that case.
This fixes random reboot issues on e5500 (booke ppc) for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Every address space has its own nodes and sections, but
it uses the same global arrays of nodes/section.
This limits the number of devices that can be attached
to the guest to 20-30 devices. It happens because:
- The sections array is limited to 2^12 entries.
- The main memory has at least 100 sections.
- Each device address space is actually an alias to
main memory, multiplying its number of nodes/sections.
Remove the limitation by using separate arrays of
nodes and sections for each address space.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
With the single exception of ppc with 16M pages,
we get the same number of levels
with L2_PAGE_SIZE = 10 as with L2_PAGE_SIZE = 9.
by doing this we reduce memory footprint of a single level
in the node memory map by 2x without runtime overhead.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
As an alternative to commit 818f86b (exec: limit system memory
size, 2013-11-04) let's just make all address spaces 64-bit wide.
This eliminates problems with phys_page_find ignoring bits above
TARGET_PHYS_ADDR_SPACE_BITS and address_space_translate_internal
consequently messing up the computations.
In Luiz's reported crash, at startup gdb attempts to read from address
0xffffffffffffffe6 to 0xffffffffffffffff inclusive. The region it gets
is the newly introduced master abort region, which is as big as the PCI
address space (see pci_bus_init). Due to a typo that's only 2^63-1,
not 2^64. But we get it anyway because phys_page_find ignores the upper
bits of the physical address. In address_space_translate_internal then
diff = int128_sub(section->mr->size, int128_make64(addr));
*plen = int128_get64(int128_min(diff, int128_make64(*plen)));
diff becomes negative, and int128_get64 booms.
The size of the PCI address space region should be fixed anyway.
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
At the moment, memory radix tree is already variable width, but it can
only skip the low bits of address.
This is efficient if we have huge memory regions but inefficient if we
are only using a tiny portion of the address space.
After we have built up the map, detect
configurations where a single L2 entry is valid.
We then speed up the lookup by skipping one or more levels.
In case any levels were skipped, we might end up in a valid section
instead of erroring out. We handle this by checking that
the address is in range of the resulting section.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
callers always shift by target page bits so let's just do this
internally.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Extend skip to 6 bit. As page entry doesn't fit in 16 bit
any longer anyway, extend it to 32 bit.
This doubles node map memory requirements, but follow-up
patches will save this memory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In preparation for dynamic radix tree depth support, rename is_leaf
field to skip, telling us how many bits to skip to next level.
Set to 0 for leaf.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The exec.c and translate-all.c radix trees are quite different, and
the exec.c one in particular is not limited to the CPU---it can be
used also by devices that do DMA, and in that case the address space
is not limited to TARGET_PHYS_ADDR_SPACE_BITS bits.
We want to make exec.c's radix trees 64-bit wide. As a first step,
stop sharing the constants between exec.c and translate-all.c.
exec.c gets P_L2_* constants, translate-all.c gets V_L2_*, for
consistency with the existing V_L1_* symbols. Though actually
in the softmmu case translate-all.c is also indexed by physical
addresses...
This patch has no semantic change.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
v4: s/fail/failed/ (Peter Maydell)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
pci, pc, virtio bug fixes
This reverts PCI master abort support - we'll want it
eventually but it exposes too many core bugs to be safe for 1.7.
This also reverts a recent exec.c change that was an
attempt to work-around some of these core bugs.
Also included are small fixes in pc and virtio,
and a core loader fix for PPC bamboo.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 10 Nov 2013 05:13:22 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (3) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
Revert "exec: limit system memory size"
Revert "hw/pci: partially handle pci master abort"
loader: drop return value for rom_add_blob_fixed
acpi-build: disable with -no-acpi
virtio-net: only delete bh that existed
Fix pc migration from qemu <= 1.5
Message-id: 1384159176-31662-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
This reverts commit 818f86b88394b7b2b59d313e51043fe15a8004db.
This was a work-around for bugs elsewhere in the system,
exposed by commit a53ae8e934cd54686875b5bcfc2f434244ee55d6:
"hw/pci: partially handle pci master abort"
since that's reverted now, the work-around is not required for 1.7
anymore.
The proper fix is supporting full 64 bit addresses in the radix tree.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Marcel Apfelbaum <marcel.a@redhat.com>
|
|
This fixes qemu abort with the following message:
include/qemu/int128.h:22: int128_get64: Assertion `!a.hi' failed.
which happens due to attempt to invalidate breakpoint by virtual address
for which get_phys_page_debug couldn't find mapping.
For more details see
http://lists.nongnu.org/archive/html/qemu-devel/2013-09/msg04582.html
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The page table logic in exec.c assumes
that memory addresses are at most TARGET_PHYS_ADDR_SPACE_BITS.
But pci addresses are full 64 bit so if we try to render them ignoring
the extra bits, we get strange effects with sections overlapping each
other.
To fix, simply limit the system memory size to
1 << TARGET_PHYS_ADDR_SPACE_BITS,
pci addresses will be rendered within that.
Cc: qemu-stable@nongnu.org
Reported-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This fixes a regression introduced by commit e3127ae0c, which kept the
allocation size of the bounce buffer limited to one page in order to
avoid unbounded allocations (as explained in the commit message of
6d16c2f88), but broke the reporting of the shortened bounce buffer to
the caller. The caller therefore assumes that the full requested size
was provided and causes memory corruption when writing beyond the end of
the actually allocated buffer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This is not needed since the RAM list is not modified anymore by
qemu_get_ram_ptr. Replace it with qemu_get_ram_block.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|