aboutsummaryrefslogtreecommitdiff
path: root/exec.c
AgeCommit message (Collapse)Author
2012-01-03Remove cpu_get_physical_page_desc()Avi Kivity
No longer used. Signed-off-by: Avi Kivity <avi@redhat.com>
2012-01-03memory: remove CPUPhysMemoryClientAvi Kivity
No longer used. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-20memory: add API for observing updates to the physical memory mapAvi Kivity
Add an API that allows a client to observe changes in the global memory map: - region added (possibly with logging enabled) - region removed (possibly with logging enabled) - logging started on a region - logging stopped on a region - global logging started - global logging removed This API will eventually replace cpu_register_physical_memory_client(). Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-19memory: move obsolete exec.c functions to a private headerAvi Kivity
This will help avoid accidental usage. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-19memory, xen: pass MemoryRegion to xen_ram_alloc()Avi Kivity
Currently xen_ram_alloc() relies on ram_addr, which is going away. Give it something else to use as a cookie. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-15phys_page_find_alloc: Use correct initial region_offset.Alex Rozenman
This fixes a common bug with initial region_offset value. Usually, the pages are re-assigned afterwards, so the bug has a very small effect on regular QEMU use flows. Signed-off-by: Alex Rozenman <Alex_Rozenman@mentor.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-15exec.c: Fix subpage memory access to RAM MemoryRegionAndreas Färber
Commit 95c318f5e1f88d7e5bcc6deac17330fd4806a2d3 (Fix segfault in mmio subpage handling code.) prevented a segfault by making all subpage registrations over an existing memory page perform an unassigned access. Symptoms were writes not taking effect and reads returning zero. Very small page sizes are not currently supported either, so subpage memory areas cannot fully be avoided. Therefore change the previous fix to use a new IO_MEM_SUBPAGE_RAM instead of IO_MEM_UNASSIGNED. Suggested by Avi. Reviewed-by: Avi Kivity <avi@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Avi Kivity <avi@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-14tcg/arm: remove fixed map code buffer restrictionDr. David Alan Gilbert
On ARM, don't map the code buffer at a fixed location, and fix up the call/goto tcg routines to let it do long jumps. Mapping the code buffer at a fixed address could sometimes result in it being mapped over the top of the heap with pretty random results. Signed-off-by: Dr. David Alan Gilbert <david.gilbert@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-12-10w32: Disable buffering for log fileStefan Weil
W32 does not support line buffering, but it supports unbuffered output. Unbuffered output is better for writing to qemu.log than fully buffered output because it also shows the latest log messages when an application crash occurs. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-11-01Make cpu_single_env thread-localPaolo Bonzini
Make cpu_single_env thread-local. This fixes a regression in handling of multi-threaded programs in linux-user mode (bug 823902). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [Peter Maydell: rename tls_cpu_single_env to cpu_single_env] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-01Error check find_ram_offsetAlex Williamson
Spotted via code review, we initialize offset to 0 to avoid a compiler warning, but in the unlikely case that offset is never set to something else, we should abort instead of return a value that will almost certainly cause problems. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-26exec.c: Remove useless comment陳韋任
As phys_ram_size had been removed since QEMU 0.12. Remove the useless comment. Signed-off-by: Chen Wen-Ren <chenwj@iis.sinica.edu.tw> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-21qemu-timer: move icount to cpus.cPaolo Bonzini
None of this is needed by tools, and most of it can even be made static inside cpus.c. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-10-01Move GETPC from dyngen-exec.h to exec-all.hBlue Swirl
GETPC() can be used even from outside of helper code. Move the macro to a more accessible location. Avoid a compile warning from redefining it in exec.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-21Remove qemu_host_page_bitsStefan Weil
It was introduced with commit 54936004fddc52c321cb3f9a9a51140e782bed5d as host_page_bits but never used. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-12fix QLIST usage for RAM listPaolo Bonzini
Spotted while reviewing the migration thread patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-08-08Integrate I/O memory regions into qemuAvi Kivity
get_system_io() returns the root I/O memory region. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-07Use mmap to allocate execute memoryTobias Nygren
Use mmap to allocate executable memory on NetBSD as well. Signed-off-by: Christoph Egger <Christoph.Egger@amd.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-05Avoid allocating TCG resources in non-TCG modeJan Kiszka
Do not allocate TCG-only resources like the translation buffer when running over KVM or XEN. Saves a "few" bytes in the qemu address space and is also conceptually cleaner. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05memory: use signed arithmeticAvi Kivity
When trying to map an alias of a ram region, where the alias starts at address A and we map it into address B, and A > B, we had an arithmetic underflow. Because we use unsigned arithmetic, the underflow converted into a large number which failed addrrange_intersects() tests. The concrete example which triggered this was cirrus vga mapping the framebuffer at offsets 0xc0000-0xc7fff (relative to the start of the framebuffer) into offsets 0xa0000 (relative to system addres space start). With our favorite analogy of a windowing system, this is equivalent to dragging a subwindow off the left edge of the screen, and failing to clip it into its parent window which is on screen. Fix by switching to signed arithmetic. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29Merge remote-tracking branch 'agraf/xen-next' into stagingAnthony Liguori
2011-07-29exec.c: initialize memory mapAvi Kivity
Allocate the root memory region and initialize it. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-26cpu-common: Have a ram_addr_t of uint64 with Xen.Anthony PERARD
In Xen case, memory can be bigger than the host memory. that mean a 32bits host (and QEMU) should be able to handle a RAM address of 64bits. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-26exec.c: Use ram_addr_t in cpu_physical_memory_rw(...).Anthony PERARD
As the variable pd and addr1 inside the function cpu_physical_memory_rw are mean to handle a RAM address, they should be of the ram_addr_t type instead of unsigned long. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-20Fix unassigned memory access handlingBlue Swirl
cea5f9a28faa528b6b1b117c9ab2d8828f473fef exposed bugs in unassigned memory access handling. Fix them by always passing CPUState to the handlers. Reported-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-17qemu_ram_ptr_length: take ram_addr_t as argumentsStefano Stabellini
qemu_ram_ptr_length should take ram_addr_t as argument rather than target_phys_addr_t because is doing comparisons with RAMBlock addresses. cpu_physical_memory_map should create a ram_addr_t address to pass to qemu_ram_ptr_length from PhysPageDesc phys_offset. Remove code after abort() in qemu_ram_ptr_length. Changes in v2: - handle 0 size in qemu_ram_ptr_length; - rename addr1 to raddr; - initialize raddr to ULONG_MAX. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17xen: Fold CONFIG_XEN_MAPCACHE into CONFIG_XENJan Kiszka
Xen won't be enabled if there is no backend support available for the host. And that also means the map cache will work. So drop the separate config switch and move the required stubs over to xen-stub.c. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17xen: Clean up map cache API namingJan Kiszka
The map cache is a Xen thing, so its API should make this clear. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-12exec.c: Fix calculation of code_gen_buffer_max_sizePeter Maydell
When calculating the point at which we should not try to put another TB into the code gen buffer, we have to allow not just for OPC_MAX_SIZE but OPC_BUF_SIZE. This is because the target translate.c will only stop when an instruction has put it past the OPC_MAX_SIZE limit, so we have to include the MAX_OP_PER_INSTR margin which that final insn might have used. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12exec: add endian specific phys ld/st functionsAlexander Graf
Device code some times needs to access physical memory and does that through the ld./st._phys functions. However, these are the exact same functions that the CPU uses to access memory, which means they will be endianness swapped depending on the target CPU. However, devices don't know about the CPU's endianness, but instead access memory directly using their own interface to the memory bus, so they need some way to read data with their native endianness. This patch adds _le and _be functions to ld./st._phys. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-27Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori
2011-06-26Remove exec-all.h include directivesBlue Swirl
Most exec-all.h include directives are now useless, remove them. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-24exec: last_first_tb was only used in !ONLY_USER caseJuan Quintela
Once there, use a better variable name. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-06-22Merge remote-tracking branch 'mst/for_anthony' into stagingAnthony Liguori
Conflicts: hw/usb-uhci.c
2011-06-19xen: mapcache performance improvementsStefano Stabellini
Use qemu_invalidate_entry in cpu_physical_memory_unmap. Do not lock mapcache entries in qemu_get_ram_ptr if the address falls in the ramblock with offset == 0. We don't need to do that because the callers of qemu_get_ram_ptr either try to map an entire block, other from the main ramblock, or until the end of a page to implement a single read or write in the main ramblock. If we don't lock mapcache entries in qemu_get_ram_ptr we don't need to call qemu_invalidate_entry in qemu_put_ram_ptr anymore because we can leave with few long lived block mappings requested by devices. Also move the call to qemu_ram_addr_from_mapcache at the beginning of qemu_ram_addr_from_host. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-19exec.c: refactor cpu_physical_memory_mapStefano Stabellini
Introduce qemu_ram_ptr_length that takes an address and a size as parameters rather than just an address. Refactor cpu_physical_memory_map so that we call qemu_ram_ptr_length only once rather than calling qemu_get_ram_ptr one time per page. This is not only more efficient but also tries to simplify the logic of the function. Currently we are relying on the fact that all the pages are mapped contiguously in qemu's address space: we have a check to make sure that the virtual address returned by qemu_get_ram_ptr from the second call on is consecutive. Now we are making this more explicit replacing all the calls to qemu_get_ram_ptr with a single call to qemu_ram_ptr_length passing a size argument. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> CC: agraf@suse.de CC: anthony@codemonkey.ws Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-19xen: remove xen_map_block and xen_unmap_blockStefano Stabellini
Replace xen_map_block with qemu_map_cache with the appropriate locking and size parameters. Replace xen_unmap_block with qemu_invalidate_entry. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-19xen: remove qemu_map_cache_unlockStefano Stabellini
There is no need for qemu_map_cache_unlock, just use qemu_invalidate_entry instead. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-15Merge remote-tracking branch 'origin/master' into pciMichael S. Tsirkin
Conflicts: hw/virtio-pci.c
2011-06-12CPUPhysMemoryClient: batch addresses in catchupAlex Williamson
When a phys memory client registers and we play catchup by walking the page tables, we can make a huge improvement in the number of times the set_memory callback is called by batching contiguous pages together. With a 4G guest, this reduces the number of callbacks at registration from 1048866 to 296. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-10Merge remote branch 'rth/axp-next' into alpha-mergeEdgar E. Iglesias
* rth/axp-next: (26 commits) target-alpha: Implement TLB flush primitives. target-alpha: Use a fixed frequency for the RPCC in system mode. target-alpha: Trap for unassigned and unaligned addresses. target-alpha: Remap PIO space for 43-bit KSEG for EV6. target-alpha: Implement cpu_alpha_handle_mmu_fault for system mode. target-alpha: Implement more CALL_PAL values inline. target-alpha: Disable interrupts properly. target-alpha: All ISA checks to use TB->FLAGS. target-alpha: Swap shadow registers moving to/from PALmode. target-alpha: Implement do_interrupt for system mode. target-alpha: Add IPRs to be used by the emulation PALcode. target-alpha: Use kernel mmu_idx for pal_mode. target-alpha: Add various symbolic constants. target-alpha: Use do_restore_state for arithmetic exceptions. target-alpha: Tidy up arithmetic exceptions. target-alpha: Tidy exception constants. target-alpha: Enable the alpha-softmmu target. target-alpha: Rationalize internal processor registers. target-alpha: Merge HW_REI and HW_RET implementations. target-alpha: Cleanup MMU modes. ...
2011-06-08Fix compilation warning due to missing header for sigaction (followup)Alexandre Raymond
This patch removes all references to signal.h when qemu-common.h is included as they become redundant. Signed-off-by: Alexandre Raymond <cerbere@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-06-03exec: Implement qemu_ram_free_from_ptr()Alex Williamson
Required for regions mapped via qemu_ram_alloc_from_ptr(). VFIO and ivshmem will make use of this to remove mappings when devices are hot unplugged. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-05-31target-alpha: Trap for unassigned and unaligned addresses.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-05-23Merge branch 'trivial-patches' of git://repo.or.cz/qemu/stefanhaAurelien Jarno
* 'trivial-patches' of git://repo.or.cz/qemu/stefanha: Fix typos in comments (chek -> check) hw/sd.c: Don't complain about SDIO commands CMD52/CMD53 hw/realview.c: Remove duplicate #include line piix_pci: fix piix3_set_irq_pic()
2011-05-22Fix typos in comments (chek -> check)Stefan Weil
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-05-20s390x: complain when allocating ram failsAlexander Graf
While trying out the > 64GB guest RAM patch, I hit some virtual address limitations of my host system, which resulted in mmap failing. Unfortunately, qemu didn't tell me about this failure, but just used the NULL pointer happily, resulting in either segmentation faults or other fun errors. To spare other users from tracing this down, let's print a nice message instead so the user can figure out what's wrong from there. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-20s390x: change mapping base to allow guests > 2GBChristian Borntraeger
the current s390x qemu memory layout is 0x1000000: guest start 0x80000000: qemu binary which limits the amount of available memory to <2GB. This patch moves the guest pages to 32GB to not collide with the binary and to leave some space for the program break of qemu. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08Introduce qemu_put_ram_ptrAnthony PERARD
This function allows to unlock a ram_ptr give by qemu_get_ram_ptr. After a call to qemu_put_ram_ptr, the pointer may be unmap from QEMU when used with Xen. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-13 09:12:09 +0000