aboutsummaryrefslogtreecommitdiff
path: root/default-configs/ppc64-softmmu.mak
AgeCommit message (Collapse)Author
2019-03-07ppc64: Express dependencies of 'pseries' and 'powernv' machines with kconfigThomas Huth
The POWERNV switch should always select ISA_IPMI_BT, then the other IPMI options are turned on automatically now. CONFIG_DIMM should always be selected by the pseries machine, which in turn depends on CONFIG_MEM_DEVICE since DIMM implements this interface. CONFIG_VIRTIO_VGA can be dropped from default-configs/ppc64-softmmu.mak completely since this device is already automatically enabled via hw/display/Kconfig now. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07ipmi: express dependencies with kconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-36-yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07build: switch to KconfigPaolo Bonzini
The make_device_config.sh script is replaced by minikconf, which is modified to support the same command line as its predecessor. The roots of the parsing are default-configs/*.mak, Kconfig.host and hw/Kconfig. One difference with make_device_config.sh is that all symbols have to be defined in a Kconfig file, including those coming from the configure script. This is the reason for the Kconfig.host file introduced in the previous patch. Whenever a file in default-configs/*.mak used $(...) to refer to a config-host.mak symbol, this is replaced by a Kconfig dependency; this part must be done already in this patch for bisectability. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-28-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-21spapr/xive: introduce a XIVE interrupt controllerCédric Le Goater
sPAPRXive models the XIVE interrupt controller of the sPAPR machine. It inherits from the XiveRouter and provisions storage for the routing tables : - Event Assignment Structure (EAS) - Event Notification Descriptor (END) The sPAPRXive model incorporates an internal XiveSource for the IPIs and for the interrupts of the virtual devices of the guest. This model is consistent with XIVE architecture which also incorporates an internal IVSE for IPIs and accelerator interrupts in the IVRE sub-engine. The sPAPRXive model exports two memory regions, one for the ESB trigger and management pages used to control the sources and one for the TIMA pages. They are mapped by default at the addresses found on chip 0 of a baremetal system. This is also consistent with the XIVE architecture which defines a Virtualization Controller BAR for the internal IVSE ESB pages and a Thread Managment BAR for the TIMA. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [dwg: Fold in field accessor fixes] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-21ppc/xive: introduce a XIVE interrupt source modelCédric Le Goater
The first sub-engine of the overall XIVE architecture is the Interrupt Virtualization Source Engine (IVSE). An IVSE can be integrated into another logic, like in a PCI PHB or in the main interrupt controller to manage IPIs. Each IVSE instance is associated with an Event State Buffer (ESB) that contains a two bit state entry for each possible event source. When an event is signaled to the IVSE, by MMIO or some other means, the associated interrupt state bits are fetched from the ESB and modified. Depending on the resulting ESB state, the event is forwarded to the IVRE sub-engine of the controller doing the routing. Each supported ESB entry is associated with either a single or a even/odd pair of pages which provides commands to manage the source: to EOI, to turn off the source for instance. On a sPAPR machine, the O/S will obtain the page address of the ESB entry associated with a source and its characteristic using the H_INT_GET_SOURCE_INFO hcall. On PowerNV, a similar OPAL call is used. The xive_source_notify() routine is in charge forwarding the source event notification to the routing engine. It will be filled later on. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-11-08hw/ppc/spapr_rng: Introduce CONFIG_SPAPR_RNG switch for spapr_rng.cThomas Huth
The spapr-rng device is suboptimal when compared to virtio-rng, so users might want to disable it in their builds. Thus let's introduce a proper CONFIG switch to allow us to compile QEMU without this device. The function spapr_rng_populate_dt is required for linking, so move it to a different location. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-10-24memory-device: introduce separate config optionDavid Hildenbrand
Some architectures might support memory devices, while they don't support DIMM/NVDIMM. So let's - Rename CONFIG_MEM_HOTPLUG to CONFIG_MEM_DEVICE - Introduce CONFIG_DIMM and use it similarly to CONFIG NVDIMM CONFIG_DIMM and CONFIG_NVDIMM require CONFIG_MEM_DEVICE. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181005092024.14344-7-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-01-20default-configs/ppc64-softmmu: Include 32-bit configs instead of copying themThomas Huth
qemu-softmmu-ppc64 is supposed to be a superset of qemu-softmmu-ppc. However, instead of simply including the 32-bit config file, we've duplicated all CONFIG_xxx settings there instead. This way, we've missed some CONFIG switches in ppc64-softmmu.mak which were only added to the 32-bit config file (e.g. CONFIG_SUNGEM). Let's fix this problem by including the 32-bit config file into the 64-bit config file instead of duplicating all the CONFIG switches there. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-10-16build: remove CONFIG_LIBDECNUMBERPaolo Bonzini
It is used by all PPC targets; we can give the directory its own Makefile.objs file, and include it directly from target/ppc. target/s390 can do the same when it starts using it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19default-configs: Replace $(and ...) with $(call land, ...)Thomas Huth
Using $(and ...) is dangerous here: It only works as long as the first argument is set to 'y' or completely unset. It does not work if the first argument is set to 'n' for example. Let's use the "land" make function instead which has been written explicitely for this purpose. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1505759538-15365-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-08ppc4xx_i2c: Move to hw/i2cBALATON Zoltan
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26ppc: add IPMI supportCédric Le Goater
OpenPOWER systems use a BT device to communicate with the BMC. Provide support for it. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-24ppc: Add SM501 device in ppc softmmu targets default configsBALATON Zoltan
This is not used by default on any emulated machine yet but it is still useful to have it compiled so it can be added from the command line for clients that can use it (e.g. MorphOS has no driver for any other emulated video cards but can output via SM501) Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Acked-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: bf305f36dcde152668cf12438ef983cd09ed2d3f.1492787889.git.balaton@eik.bme.hu Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-06Split serial-isa into its own config optionDavid Gibson
At present, the core device model code for 8250-like serial ports (serial.c) and the code for serial ports attached to ISA-style legacy IO (serial-isa.c) are both controlled by the CONFIG_SERIAL variable. There are lots and lots of embedded platforms that have 8250-like serial ports but have never had anything resembling ISA legacy IO. Therefore, split serial-isa into its own CONFIG_SERIAL_ISA option so it can be disabled for platforms where it's not appropriate. For now, I enabled CONFIG_SERIAL_ISA in every default-config where CONFIG_SERIAL is enabled, excepting microblaze, or32, and xtensa. As best as I can tell, those platforms never used legacy ISA, and also don't include PCI support (which would allow connection of a PCI->ISA bridge and/or a southbridge including legacy ISA serial ports). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-31prep: add IBM RS/6000 7020 (40p) memory controllerHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [dwg: Added CONFIG_RS6000_MC to ppc64 or it breaks testcases] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-28ppc/pnv: add skeleton PowerNV platformBenjamin Herrenschmidt
The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-09-13default-configs: removed obsolete CONFIG_ISA_MMIODaniel P. Berrange
The use of the CONFIG_ISA_MMIO setting was removed in commit 61fcb628627ea464dc1954f615ae13edfefd284f Author: Paolo Bonzini <pbonzini@redhat.com> Date: Mon Jul 22 15:54:24 2013 +0200 isa_mmio: delete but this commit only removed it from some of the default config files. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1473096320-1638-3-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-01ppc/xics: Move SPAPR specific code to a separate fileBenjamin Herrenschmidt
Leave the core ICP/ICS logic in xics.c and move the top level class wrapper, hypercall and RTAS handlers to xics_spapr.c Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [add cpu.h in xics_spapr.c, move set_nr_irqs and set_nr_servers to xics_spapr.c] Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-20ppc/spapr: Allow VIRTIO_VGABenjamin Herrenschmidt
It works fine with the Linux driver out of the box Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-09-23spapr: Initialize hotplug memory address spaceBharata B Rao
Initialize a hotplug memory region under which all the hotplugged memory is accommodated. Also enable memory hotplug by setting CONFIG_MEM_HOTPLUG. Modelled on i386 memory hotplug. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-03-09ppc64-softmmu: Remove duplicated OPENPIC from configAlexey Kardashevskiy
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-03-09Revert "default-configs/ppc64: add all components of i82378 SuperIO chip ↵Alexey Kardashevskiy
used by prep" This reverts commit 9c9984242ce46ccf8636f5c19e81d794e84aa0c7 as even when it was applied, all supposedly new config options were already enabled. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-02-27Create specific config option for "platform-bus"David Gibson
Currently the "platform-bus" device is included for all softmmu builds. This bridge is intended for use on any platforms that require dynamic creation of sysbus devices. However, at present it is used only for the PPC E500 target, with plans for the ARM "virt" target in the immediate future. To avoid a not-very-useful entry appearing in "qemu -device ?" output on other targets, this patch makes a specific config option for platform-bus and enables it (for now) only on ppc configurations which include E500 and on ARM (which always includes the "virt" target). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <1425017077-18487-3-git-send-email-david@gibson.dropbear.id.au> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-13pci: Move PCI VGA to pci.makAlexander Graf
Every platform that supports PCI can also spawn the Bochs VGA PCI adapter. Move it to pci.mak to enable it for everyone. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-08PPC: Fix default config ordering and add eTSEC for ppc64Alexander Graf
We messed up the ordering in our default configs for PPC. The top entries are generic entries, then come sections that indicate that features are only in because of a special feature (such as PReP). Fix the ordering again and while at it add eTSEC support to the ppc64 target so that we can spawn eTSEC adapters with qemu-system-ppc64. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Enable Building of libdecnumberTom Musta
Enable compilation of the newly added libdecnumber library code. Object file targets are added to Makefile.target using a newly introduced flag CONFIG_LIBDECNUMBER. The flag is added to the PowerPC targets (ppc[64]-linux-user, ppc[64]-softmmu). Signed-off-by: Tom Musta <tommusta@gmail.com> [agraf: add ppcemb and ppc64abi32 config] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-02-13ppcemb-softmmu: Drop Mac and e500 emulationAndreas Färber
They are still available in ppc-softmmu and ppc64-softmmu. Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-10prep: Drop from ppcemb-softmmuAndreas Färber
ppcemb covers only embedded processors, which does not include PReP. Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2013-10-25xics-kvm: Support for in-kernel XICS interrupt controllerDavid Gibson
Recent (host) kernels support emulating the PAPR defined "XICS" interrupt controller system within KVM. This patch allows qemu to initialize and configure the in-kernel XICS, and keep its state in sync with qemu's XICS state as necessary. This should give considerable performance improvements. e.g. on a simple IPI ping-pong test between hardware threads, using qemu XICS gives us around 5,000 irqs/second, whereas the in-kernel XICS gives us around 70,000 irqs/s on the same hardware configuration. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [Mike Qiu <qiudayu@linux.vnet.ibm.com>: fixed mistype which caused ics_set_kvm_state() to fail] Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-10-16default-configs/: CONFIG_GDBSTUB_XML removedÁkos Kovács
Makefile.target: Build gdbstub-xml.o only when TARGET_XML_FILES is not empty. Signed-off-by: Ákos Kovács <akoskovacs@gmx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-25default-configs/ppc64: add all components of i82378 SuperIO chip used by prepPaolo Bonzini
The device provides an ISA bus so that pseries can also run the endianness test. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1374501278-31549-24-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25default-configs: add test device to all machines supporting ISAPaolo Bonzini
This will let these machines run an endianness test for ISA I/O port space. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1374501278-31549-22-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-11pseries: move interrupt controllers to hw/intc/Alexey Kardashevskiy
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-04pci: Cleanup configuration for pci-hotplug.cDavid Gibson
pci-hotplug.c and the CONFIG_PCI_HOTPLUG variable which controls its compilation are misnamed. They're not about PCI hotplug in general, but rather about the pci_add/pci_del interface which are now deprecated in favour of the more general device_add/device_del interface. This patch therefore renames them to pci-hotplug-old.c and CONFIG_PCI_HOTPLUG_OLD. CONFIG_PCI_HOTPLUG=y was listed twice in {i386,x86_64}-softmmu.make for no particular reason, so we clean that up too. In addition it was included in ppc64-softmmu.mak for which the old hotplug interface was never used and is unsuitable, so we remove that too. Most of pci-hotplug.c was additionaly protected by #ifdef TARGET_I386. The small piece which wasn't is only called from the pci_add and pci_del hooks in hmp-commands.hx, which themselves were protected by #ifdef TARGET_I386. This patch therefore also removes the #ifdef from pci-hotplug-old.c, and changes the ifdefs in hmp-commands.hx to use CONFIG_PCI_HOTPLUG_OLD. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-01kvm/openpic: in-kernel mpic supportScott Wood
Enables support for the in-kernel MPIC that thas been merged into the KVM next branch. This includes irqfd/KVM_IRQ_LINE support from Alex Graf (along with some other improvements). Note from Alex regarding kvm_irqchip_create(): On x86, one would call kvm_irqchip_create() to initialize an in-kernel interrupt controller. That function then goes ahead and initializes global capability variables as well as the default irq routing table. On ppc, we can't call kvm_irqchip_create() because we can have different types of interrupt controllers. So we want to do all the things that function would do for us in the in-kernel device init handler. Signed-off-by: Scott Wood <scottwood@freescale.com> [agraf: squash in kvm_irqchip_commit_routes patch, fix non-kvm build, fix ppcemb] Signed-off-by: Alexander Graf <agraf@suse.de>
2013-06-14ppc: Remove CONFIG_FDT conditionalsPeter Maydell
Now that we know we're compiling with libfdt we can remove the CONFIG_FDT conditionals. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Message-id: 1369409217-7553-5-git-send-email-peter.maydell@linaro.org
2013-04-29audio: replace audio card configuration with default-configsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366303444-24620-6-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-08hw: move interrupt controllers to hw/intc/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move NICs to hw/net/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move MC146818RTC to hw/timer/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: make all of hw/pci/ configurable via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move target-independent files to subdirectoriesPaolo Bonzini
This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01ppc: express FDT dependency of pSeries and e500 boards via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-02-19make usb devices configurableGerd Hoffmann
Leave the core usb devices (usb hub, tablet, mouse, keyboard) enabled unconditionally. Make the other ones configurable. Exceptions: - bluetooth: not qdevified yet, has a vl.c dependency because of that, thus disabling isn't as easy as not linking the object file. - smardcard: ccid-card-emulated depends on that one *and* CONFIG_SMARTCARD_NSS. So it isn't a one-liner and comes as separate patch because of that. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-08-15prep: Use pc87312 device instead of collection of random ISA devicesHervé Poussineau
We can't however replace the built-in IDE controller, as the one in pc87312 is only single-channel and can use only IRQ 14. Therefore the pc87312's IDE function gets disabled via the config property. PReP emulation also gains a parallel port emulation this way. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> [AF: Use TYPE_PC87312 constant, add to ppc64-softmmu and to MAINTAINERS] Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2012-08-15prep: Include devices for ppc64 as wellAndreas Färber
Allows running qemu-system-ppc64 -M prep for consistency. Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Acked-by: Hervé Poussineau <hpoussineau@reactos.org>
2012-06-15hw/xilinx_*: Share Xilinx devices between ppc and microblazeAndreas Färber
Speeds up the build. xilinx_ethlite uses tswap32() and is thus target-dependent. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2012-01-22vga: make Cirrus ISA device optionalBlue Swirl
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16i8259: Move to hw libraryJan Kiszka
No target-specific bits remaining, let's move it over. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-17config: move ide core and pci to pci.makAlexander Graf
Every device that can do PCI should also be able to do IDE. So let's move the IDE definitions over to pci.mak. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-13 04:51:57 +0000