aboutsummaryrefslogtreecommitdiff
path: root/configure
AgeCommit message (Collapse)Author
2015-11-05configure: disable FORTIFY_SOURCE under clangJohn Snow
Some versions of clang may have difficulty compiling glibc headers when -D_FORTIFY_SOURCE is used. For example, Clang++ 3.5.0-9.fc22 cannot compile glibc's stdio headers when -D_FORTIFY_SOURCE=2 is used. This manifests currently as build failures with clang and any arm target. According to LLVM dev Richard Smith, clang does not target or support FORTIFY_SOURCE + glibc, and it should not be relied on. "It's still an unsupported combination, and while it might compile, some of the checks are unlikely to work because they require a frontend inliner to be useful" See: http://lists.llvm.org/pipermail/cfe-dev/2015-November/045846.html Conclusion: disable fortify-source if we appear to be using clang instead of testing for compile success or failure, which may be incidental or not indicative of proper support of the feature. Signed-off-by: John Snow <jsnow@redhat.com> Message-Id: <1446583422-10153-1-git-send-email-jsnow@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04configure: disallow ccache during compile testsJohn Snow
If the user is using ccache during the configuration step, it may interfere with some of the configuration tests, particularly the "Is ccache interfering with macro analysis" step, which is a bit of a poetic problem. 1) Disallow ccache from reading from the cache during configure, but don't disable it entirely to allow us to see if it causes other problems. 2) Force off CCACHE_CPP2 during the ccache test to get a deterministic answer over whether or not we need to enable that feature later. Signed-off-by: John Snow <jsnow@redhat.com> Message-Id: <1446055000-29150-1-git-send-email-jsnow@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-24contrib: add ivshmem client and serverDavid Marchand
When using ivshmem devices, notifications between guests can be sent as interrupts using a ivshmem-server (typical use described in documentation). The client is provided as a debug tool. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Signed-off-by: David Marchand <david.marchand@6wind.com> [fix a valgrind warning, option and server_close() segvs, extra server headers includes, getopt() return type, out-of-tree build, use qemu event_notifier instead of eventfd, fix x86/osx warnings - Marc-André] Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2015-10-22configure: avoid polluting global CFLAGS with tasn1 flagsDaniel P. Berrange
The previous commit commit 9a2fd4347c40321f5cbb4ab4220e759fcbf87d03 Author: Daniel P. Berrange <berrange@redhat.com> Date: Mon Apr 13 14:01:39 2015 +0100 crypto: add sanity checking of TLS x509 credentials defined new variables $TEST_LIBS and $TEST_CFLAGS and used them in tests/Makefile to augment $LIBS and $CFLAGS. Unfortunately this overlooks the fact that tests/Makefile is not executed via recursive-make, it is just pulled into the top level Makefile via an include statement. So rather than just augmenting the compiler/linker flags for tests it polluted the global flags. This is thought to be behind a reported failure when building the pixman module as a sub-module, since global $CFLAGS are passed down to configure in pixman. This change removes the $TEST_LIBS and $TEST_CFLAGS replacing them with $TASN1_LIBS and $TASN1_CFLAGS, setting only against specific objects/executables that need them. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-10-22crypto: allow use of nettle/gcrypt to be selected explicitlyDaniel P. Berrange
Currently the choice of whether to use nettle or gcrypt is made based on what gnutls is linked to. There are times when it is desirable to be able to force build against a specific library. For example, if testing changes to QEMU's crypto code all 3 possible backends need to be checked regardless of what the local gnutls uses. It is also desirable to be able to enable nettle/gcrypt for cipher/hash algorithms, without enabling gnutls for TLS support. This gives two new configure flags, which allow the following possibilities Automatically determine nettle vs gcrypt from what gnutls links to (recommended to minimize number of crypto libraries linked to) ./configure Automatically determine nettle vs gcrypt based on which is installed ./configure --disable-gnutls Force use of nettle ./configure --enable-nettle Force use of gcrypt ./configure --enable-gcrypt Force use of built-in AES & crippled-DES ./configure --disable-nettle --disable-gcrypt Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-10-22Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
vhost, pc, virtio features, fixes, cleanups New features: VT-d support for devices behind a bridge vhost-user migration support Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 22 Oct 2015 12:39:19 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: (37 commits) hw/isa/lpc_ich9: inject the SMI on the VCPU that is writing to APM_CNT i386: keep cpu_model field in MachineState uptodate vhost: set the correct queue index in case of migration with multiqueue piix: fix resource leak reported by Coverity seccomp: add memfd_create to whitelist vhost-user-test: check ownership during migration vhost-user-test: add live-migration test vhost-user-test: learn to tweak various qemu arguments vhost-user-test: wrap server in TestServer struct vhost-user-test: remove useless static check vhost-user-test: move wait_for_fds() out vhost: add migration block if memfd failed vhost-user: use an enum helper for features mask vhost user: add rarp sending after live migration for legacy guest vhost user: add support of live migration net: add trace_vhost_user_event vhost-user: document migration log vhost: use a function for each call vhost-user: add a migration blocker vhost-user: send log shm fd along with log_base ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-22configure: probe for memfdMarc-André Lureau
Check if memfd_create() is part of system libc. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
2015-10-19build: qemu-ga: add 'qemu-ga' build target for w32Michael Roth
Currently POSIX builds rely on 'qemu-ga' target to do qga-only distributable build. On w32, as with most standalone binary targets, we rely on 'qemu-ga.exe' target. Unlike with POSIX, qemu-ga for w32 has a number of related targets such as VSS DLL and MSI package. We can do the full distributable qga-only build on w32 with: make qemu-ga.exe or: make msi To make that work, we tie VSS dependencies onto qemu-ga.exe. However, in reality the DLL isn't part of the binary, so we use a filter to pull them out of the LINK recipe, which attempts to link against prereqs for binary targets. Additionally, it could be argued that VSS is a separate distributable, and shouldn't be implied by qemu-ga.exe binary target. To avoid this, we can tie the VSS dependencies only to the 'msi' target, but that would make it impossible to do a qga-only build of the w32 distributable without building the 'msi' package, which was supported in the past. An alternative approach is to add a new target to build the whole distributable. w32 allows us to use the same build target we use on POSIX, 'qemu-ga', since the current binary-only target on w32 is 'qemu-ga.exe'. To further simplify the build, we also make 'qemu-ga' build the MSI package if the appropriate ./configure options are set, making the full qga-only build the same on both POSIX and w32: `make qemu-ga` Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-12configure: Require Python 2.6Markus Armbruster
RHEL-6 and SLES-11 provide Python 2.6. It'll also work on OS X back to 10.6. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1441396383-17304-1-git-send-email-armbru@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-09Merge remote-tracking branch 'remotes/kraxel/tags/pull-virgl-20151008-1' ↵Peter Maydell
into staging virtio-gpu: add 3d rendering support using virgl, misc fixes. ui/gtk: add opengl context and scanout support (for virtio-gpu). # gpg: Signature made Thu 08 Oct 2015 10:35:39 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-virgl-20151008-1: gtk/opengl: add opengl context and scanout support (GtkGLArea) gtk/opengl: add opengl context and scanout support (egl) opengl: add egl-context.[ch] helpers virtio-gpu: add cursor update tracepoint virtio-gpu: add 3d mode and virgl rendering support. virtio-gpu: update headers for virgl/3d virtio-gpu: change licence from GPLv2 to GPLv2+ virtio-gpu: move iov free to virtio_gpu_cleanup_mapping_iov ui/console: add opengl context and scanout support interfaces. sdl2: stop flickering shaders: initialize vertexes once Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-08gtk/opengl: add opengl context and scanout support (GtkGLArea)Gerd Hoffmann
This allows virtio-gpu to render in 3d mode. Uses native opengl support which is present in gtk versions 3.16 and newer. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-10-08virtio-gpu: add 3d mode and virgl rendering support.Gerd Hoffmann
Add virglrenderer library detection. Add 3d mode to virtio-gpu, wire up virglrenderer library. When in 3d mode render using the new context management and texture scanout callbacks. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-10-02s390x/gdb: expose virtualization specific registersDavid Hildenbrand
Let's expose some virtual/fake registers as virtualization specific registers. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Message-Id: <1443689387-34473-3-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-09-24oslib-win32: only provide localtime_r/gmtime_r if missingDaniel P. Berrange
The oslib-win32 file currently provides a localtime_r and gmtime_r replacement unconditionally. Some versions of Mingw-w64 would provide crude macros for localtime_r/gmtime_r which QEMU takes care to disable. Latest versions of Mingw-w64 now provide actual functions for localtime_r/gmtime_r, but with a twist that you have to include unistd.h or pthread.h before including time.h. By luck some files in QEMU have such an include order, resulting in compile errors: CC util/osdep.o In file included from include/qemu-common.h:48:0, from util/osdep.c:48: include/sysemu/os-win32.h:77:12: error: redundant redeclaration of 'gmtime_r' [-Werror=redundant-decls] struct tm *gmtime_r(const time_t *timep, struct tm *result); ^ In file included from include/qemu-common.h:35:0, from util/osdep.c:48: /usr/i686-w64-mingw32/sys-root/mingw/include/time.h:272:107: note: previous definition of 'gmtime_r' was here In file included from include/qemu-common.h:48:0, from util/osdep.c:48: include/sysemu/os-win32.h:79:12: error: redundant redeclaration of 'localtime_r' [-Werror=redundant-decls] struct tm *localtime_r(const time_t *timep, struct tm *result); ^ In file included from include/qemu-common.h:35:0, from util/osdep.c:48: /usr/i686-w64-mingw32/sys-root/mingw/include/time.h:269:107: note: previous definition of 'localtime_r' was here This change adds a configure test to see if localtime_r exits, and only enables the QEMU impl if missing. We also re-arrange qemu-common.h try attempt to guarantee that all source files get unistd.h before time.h and thus see the localtime_r/gmtime_r defs. [sw: Use "official" spellings for Mingw-w64, MinGW in comments.] [sw: Terminate sentences with a dot in comments.] Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Stefan Weil <sw@weilnetz.de>
2015-09-23libcacard: use the standalone projectMarc-André Lureau
libcacard is now a standalone project hosted with the Spice project (see the 2.5.0 release announcement), remove it from qemu tree. Use the library if found during configure or if --enable-smartcard. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-15Merge remote-tracking branch 'remotes/rth/tags/pull-tile-20150915' into stagingPeter Maydell
TileGX basic instructions # gpg: Signature made Tue 15 Sep 2015 15:57:08 BST using RSA key ID 4DD0279B # gpg: Good signature from "Richard Henderson <rth7680@gmail.com>" # gpg: aka "Richard Henderson <rth@redhat.com>" # gpg: aka "Richard Henderson <rth@twiddle.net>" * remotes/rth/tags/pull-tile-20150915: (35 commits) target-tilegx: Handle v1shl, v1shru, v1shrs target-tilegx: Handle v1shli, v1shrui target-tilegx: Handle v4int_l/h target-tilegx: Handle atomic instructions target-tilegx: Handle mtspr, mfspr target-tilegx: Handle v1cmpeq, v1cmpne target-tilegx: Handle mask instructions target-tilegx: Handle scalar multiply instructions target-tilegx: Handle conditional move instructions target-tilegx: Handle shift instructions target-tilegx: Handle bitfield instructions target-tilegx: Implement system and memory management instructions target-tilegx: Handle comparison instructions target-tilegx: Handle conditional branch instructions target-tilegx: Handle unconditional jump instructions target-tilegx: Handle post-increment load and store instructions target-tilegx: Handle basic load and store instructions target-tilegx: Handle most bit manipulation instructions target-arm: Use new revbit functions host-utils: Add revbit functions ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-15target-tilegx: Add TILE-Gx building filesChen Gang
Add related configuration and make files for tilegx. The target can now build, though not run anything. Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <BLU436-SMTP1588E5A03AD5E94B07E988B9660@phx.gbl> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-15ui: convert VNC server to use QCryptoTLSSessionDaniel P. Berrange
Switch VNC server over to using the QCryptoTLSSession object for the TLS session. This removes the direct use of gnutls from the VNC server code. It also removes most knowledge about TLS certificate handling from the VNC server code. This has the nice effect that all the CONFIG_VNC_TLS conditionals go away and the user gets an actual error message when requesting TLS instead of it being silently ignored. With this change, the existing configuration options for enabling TLS with -vnc are deprecated. Old syntax for anon-DH credentials: -vnc hostname:0,tls New syntax: -object tls-creds-anon,id=tls0,endpoint=server \ -vnc hostname:0,tls-creds=tls0 Old syntax for x509 credentials, no client certs: -vnc hostname:0,tls,x509=/path/to/certs New syntax: -object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=no \ -vnc hostname:0,tls-creds=tls0 Old syntax for x509 credentials, requiring client certs: -vnc hostname:0,tls,x509verify=/path/to/certs New syntax: -object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=yes \ -vnc hostname:0,tls-creds=tls0 This aligns VNC with the way TLS credentials are to be configured in the future for chardev, nbd and migration backends. It also has the benefit that the same TLS credentials can be shared across multiple VNC server instances, if desired. If someone uses the deprecated syntax, it will internally result in the creation of a 'tls-creds' object with an ID based on the VNC server ID. This allows backwards compat with the CLI syntax, while still deleting all the original TLS code from the VNC server. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-09-15crypto: add sanity checking of TLS x509 credentialsDaniel P. Berrange
If the administrator incorrectly sets up their x509 certificates, the errors seen at runtime during connection attempts are very obscure and difficult to diagnose. This has been a particular problem for people using openssl to generate their certificates instead of the gnutls certtool, because the openssl tools don't turn on the various x509 extensions that gnutls expects to be present by default. This change thus adds support in the TLS credentials object to sanity check the certificates when QEMU first loads them. This gives the administrator immediate feedback for the majority of common configuration mistakes, reducing the pain involved in setting up TLS. The code is derived from equivalent code that has been part of libvirt's TLS support and has been seen to be valuable in assisting admins. It is possible to disable the sanity checking, however, via the new 'sanity-check' property on the tls-creds object type, with a value of 'no'. Unit tests are included in this change to verify the correctness of the sanity checking code in all the key scenarios it is intended to cope with. As part of the test suite, the pkix_asn1_tab.c from gnutls is imported. This file is intentionally copied from the (long since obsolete) gnutls 1.6.3 source tree, since that version was still under GPLv2+, rather than the GPLv3+ of gnutls >= 2.0. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-09-14Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Support for jemalloc * qemu_mutex_lock_iothread "No such process" fix * cutils: qemu_strto* wrappers * iohandler.c simplification * Many other fixes and misc patches. And some MTTCG work (with Emilio's fixes squashed): * Signal-free TCG kick * Removing spinlock in favor of QemuMutex * User-mode emulation multi-threading fixes/docs # gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (44 commits) cutils: work around platform differences in strto{l,ul,ll,ull} cpu-exec: fix lock hierarchy for user-mode emulation exec: make mmap_lock/mmap_unlock globally available tcg: comment on which functions have to be called with mmap_lock held tcg: add memory barriers in page_find_alloc accesses remove unused spinlock. replace spinlock by QemuMutex. cpus: remove tcg_halt_cond and tcg_cpu_thread globals cpus: protect work list with work_mutex scripts/dump-guest-memory.py: fix after RAMBlock change configure: Add support for jemalloc add macro file for coccinelle configure: factor out adding disas configure vhost-scsi: fix wrong vhost-scsi firmware path checkpatch: remove tests that are not relevant outside the kernel checkpatch: adapt some tests to QEMU CODING_STYLE: update mixed declaration rules qmp: Add example usage of strto*l() qemu wrapper cutils: Add qemu_strtoull() wrapper cutils: Add qemu_strtoll() wrapper ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-10xen: use errno instead of rc for xc_domain_add_to_physmapKonrad Rzeszutek Wilk
In Xen 4.6 commit cd2f100f0f61b3f333d52d1737dd73f02daee592 "libxc: Fix do_memory_op to return negative value on errors" made the libxc API less odd-ball: On errors, return value is -1 and error code is in errno. On success the return value is either 0 or an positive value. Since we could be running with an old toolstack in which the Exx value is in rc or the newer, we add an wrapper around the xc_domain_add_to_physmap (called xen_xc_domain_add_to_physmap) which will always return the EXX. Xen 4.6 did not change the libxc functions mentioned (same parameters) so we piggyback on the fact that Xen 4.6 has a new function: commit 504ed2053362381ac01b98db9313454488b7db40 "tools/libxc: Expose new hypercall xc_reserved_device_memory_map" and check for that. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Suggested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/HVM: atomically access pointers in bufioreq handlingJan Beulich
The number of slots per page being 511 (i.e. not a power of two) means that the (32-bit) read and write indexes going beyond 2^32 will likely disturb operation. The hypervisor side gets I/O req server creation extended so we can indicate that we're using suitable atomic accesses where needed, allowing it to atomically canonicalize both pointers when both have gone through at least one cycle. The Xen side counterpart (which is not a functional prereq to this change, albeit a build one) went in already (commit b7007bc6f9). Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-09configure: Add support for jemallocAlexandre Derumier
This adds "--enable-jemalloc" and "--disable-jemalloc" to allow linking to jemalloc memory allocator. We have already tcmalloc support, but it seem to not working well with a lot of iothreads/disks. The main problem is that tcmalloc use a shared thread cache of 16MB by default. With more threads, this cache is shared, and some bad garbage collections can occur if the cache is too low. It's possible to tcmalloc cache increase it with a env var: TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=256MB With default 16MB, performances are really bad with more than 2 disks. Increasing to 256MB, it's helping but still have problem with 16 disks/iothreads. Jemalloc don't have performance problem with default configuration. Here the benchmark results in iops of 1 qemu vm randread 4K iodepth=32, with rbd block backend (librbd is doing a lot of memory allocation), 1 iothread by disk glibc malloc ------------ 1 disk 29052 2 disks 55878 4 disks 127899 8 disks 240566 15 disks 269976 jemalloc -------- 1 disk 41278 2 disks 75781 4 disks 195351 8 disks 294241 15 disks 298199 tcmalloc 2.2.1 default 16M cache -------------------------------- 1 disk 37911 2 disks 67698 4 disks 41076 8 disks 43312 15 disks 37569 tcmalloc : 256M cache --------------------------- 1 disk 33914 2 disks 58839 4 disks 148205 8 disks 213298 15 disks 218383 Signed-off-by: Alexandre Derumier <aderumier@odiso.com> Message-Id: <1434711418-20429-1-git-send-email-aderumier@odiso.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09configure: factor out adding disas configurePeter Crosthwaite
Every arch adds its disas configury to both its own config as well config_disas_all. Make a small function do to both at once. Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-Id: <1440844439-19391-1-git-send-email-crosthwaite.peter@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-07s390x/gdb: support reading/writing of control registersDavid Hildenbrand
Let's support reading and writing of control registers for kvm and tcg. We have to take care of flushing the tlb (tcg) and pushing the changed registers into kvm. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-09-01build: qemu-ga: fix VSS dependenciesMichael Roth
Currently VSS dll/tlb files for use in w32 builds are only built as a result of having been added to the general 'tools' target alongside qemu-ga. This is fine for default make target, but if we build qemu-ga directly via `make qemu-ga.exe`, the VSS files are not created. Fix this by moving the VSS dependencies to qemu-ga.exe directly. With this move we can move the VSS files back out of 'tools', and drop the extra handling from MSI target in Makefile. Now we can build qemu-ga MSI package with: ./configure ... make qemu-ga.exe make msi or simply: ./configure ... make msi and no longer need to do a full build beforehand. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01configure: qemu-ga: explicitly enable qemu-ga MSI support when probedMichael Roth
Currently, if we don't explicitly disable support for MSI installer via --disable-guest-agent-msi, the configure variable that tracks the flag, 'guest_agent_msi', never gets set unless one of the probes fails. Subsequent code then treats this unset value the same as if it were a "yes" value (via != "no" style checks). Instead, set the default "yes" value explicitly after the probes, then make subsequent code expect the values to be set. This makes it easier to report on whether or not MSI support was enabled via probe by looking at the ./configure summary. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01configure: qemu-ga: move MSI installer probe after qga probeMichael Roth
MSI probe assumes that qemu-ga support has been probed already, but in cases where --enable-guest-agent/--disable-guest-agent have not been passed to configure, qemu-ga support may end up getting enabled later, as is the case with w32 builds. This leads to MSI probe prematurely reporting error due to lack of qemu-ga support. Fix this by moving MSI installer probe after the final qga probes. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01qemu-ga: implement win32 guest-set-user-passwordMarc-André Lureau
Use NetUserSetInfo() to set the user password. This function is notoriously known to be problematic for users with EFS encrypted files. But the alternative, NetUserChangePassword() requires the old password. Nevertheless, The EFS file should be recovered by changing back to the old password. Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01configure: qemu-ga: report MSI install support in summaryMichael Roth
Currently we need to examine config-host.mak to determine whether options/probes for MSI package generation had desired result. Report this more prominently in ./configure summary as we do with other guest agent configure options. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-08-24linux-user: remove --enable-guest-base/--disable-guest-baseLaurent Vivier
All tcg host architectures now support the guest base and as there is no real performance lost, it can be always enabled. Anyway, guest base use can be disabled lively by setting guest base to 0. CONFIG_USE_GUEST_BASE is defined as (USE_GUEST_BASE && USER_ONLY), it should have to be replaced by CONFIG_USER_ONLY in non CONFIG_USER_ONLY parts, but as some other parts are using !CONFIG_SOFTMMU I have chosen to use !CONFIG_SOFTMMU instead. Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1440373328-9788-2-git-send-email-laurent@vivier.eu> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-19configure: Don't permit SDL or GTK on OSXPeter Maydell
The cocoa GUI frontend assumes it is the only GUI (it redefines main() so it always gets control before the rest of QEMU), so it does not play well with other UIs like SDL or GTK. (Mostly people building QEMU on OSX don't have the necessary dependencies available for configure to build those other front ends, so mostly this problem goes unnoticed.) Make configure automatically disable the SDL and GTK front ends if the cocoa front end is enabled. (We were sort of attempting to do this for SDL before, but not in a way that worked very well.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: John Arbuckle <programmingkidx@gmail.com> Message-id: 1439565052-3457-1-git-send-email-peter.maydell@linaro.org
2015-08-18Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* SCSI fixes from Stefan and Fam * vhost-scsi fix from Igor and Lu Lina * a build system fix from Daniel * two more multi-arch-related patches from Peter C. * TCG patches from myself and Sergey Fedorov * RCU improvement from Wen Congyang * a few more simple cleanups # gpg: Signature made Fri 14 Aug 2015 22:41:52 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: disas: Defeature print_target_address hw: fix mask for ColdFire UART command register scsi-generic: identify AIO callbacks more clearly scsi-disk: identify AIO callbacks more clearly scsi: create restart bottom half in the right AioContext configure: only add CONFIG_RDMA to config-host.h once qemu-nbd: remove unnecessary qemu_notify_event() vhost-scsi: Clarify vhost_virtqueue_mask argument exec: use macro ROUND_UP for alignment rcu: Allow calling rcu_(un)register_thread() during synchronize_rcu() exec: drop cpu_can_do_io, just read cpu->can_do_io cpu_defs: Simplify CPUTLB padding logic cpu-exec: Do not invalidate original TB in cpu_exec_nocache() vhost/scsi: call vhost_dev_cleanup() at unrealize() time virtio-scsi-test: Add test case for tail unaligned WRITE SAME scsi-disk: Fix assertion failure on WRITE SAME tests: virtio-scsi: clear unit attention after reset scsi-disk: fix cmd.mode field typo virtio-scsi: use virtqueue_map_sg() when loading requests Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-14configure: only add CONFIG_RDMA to config-host.h onceDaniel P. Berrange
For unknown reasons (probably a git rebase merge mistake) commit 2da776db4846eadcb808598a5d3484d149773c05 Author: Michael R. Hines <mrhines@us.ibm.com> Date: Mon Jul 22 10:01:54 2013 -0400 rdma: core logic Adds CONFIG_RDMA to config-host.h twice, as can be seen in the generated file: $ grep CONFIG_RDMA config-host.h #define CONFIG_RDMA 1 #define CONFIG_RDMA 1 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1438345403-32467-1-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-08-03configure: Drop vnc-ws feature from help textAndreas Färber
Commit 8e9b0d2 (ui: convert VNC websockets to use crypto APIs) dropped the --enable-vnc-ws option but forgot to update the help text. Fix this. Cc: Daniel P. Berrange <berrange@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1437749257-3313-1-git-send-email-afaerber@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-27configure: Work around broken static pkg-config info for Ubuntu gnutlsPeter Maydell
Unfortunately Ubuntu's pkg-config information for gnutls is broken for the static linking case, and outputs --libs options which the compiler does not recognize. Work around this problem by testing that the --cflags/--libs output will at least allow compilation before enabling gnutls support. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1437758888-22486-1-git-send-email-peter.maydell@linaro.org
2015-07-16crypto: fix build with nettle >= 3.0.0Radim Krčmář
In nettle 3, cbc_encrypt() accepts 'nettle_cipher_func' instead of 'nettle_crypt_func' and these two differ in 'const' qualifier of the first argument. The build fails with: In file included from crypto/cipher.c:71:0: ./crypto/cipher-nettle.c: In function ‘qcrypto_cipher_encrypt’: ./crypto/cipher-nettle.c:154:38: error: passing argument 2 of ‘nettle_cbc_encrypt’ from incompatible pointer type cbc_encrypt(ctx->ctx_encrypt, ctx->alg_encrypt, ^ In file included from ./crypto/cipher-nettle.c:24:0, from crypto/cipher.c:71: /usr/include/nettle/cbc.h:48:1: note: expected ‘void (*)(const void *, size_t, uint8_t *, const uint8_t *) but argument is of type ‘void (*)( void *, size_t, uint8_t *, const uint8_t *) To allow both versions, we switch to the new definition and #if typedef it for old versions. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Message-Id: <1436548682-9315-2-git-send-email-rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-08Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
Bugfixes and Daniel Berrange's crypto library. # gpg: Signature made Wed Jul 8 12:12:29 2015 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: ossaudio: fix memory leak ui: convert VNC to use generic cipher API block: convert qcow/qcow2 to use generic cipher API ui: convert VNC websockets to use crypto APIs block: convert quorum blockdrv to use crypto APIs crypto: add a nettle cipher implementation crypto: add a gcrypt cipher implementation crypto: introduce generic cipher API & built-in implementation crypto: move built-in D3DES implementation into crypto/ crypto: move built-in AES implementation into crypto/ crypto: introduce new module for computing hash digests vl: move rom_load_all after machine init done Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-08ui: convert VNC websockets to use crypto APIsDaniel P. Berrange
Remove the direct use of gnutls for hash processing in the websockets code, in favour of using the crypto APIs. This allows the websockets code to be built unconditionally removing countless conditional checks from the VNC code. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1435770638-25715-9-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-08block: convert quorum blockdrv to use crypto APIsDaniel P. Berrange
Get rid of direct use of gnutls APIs in quorum blockdrv in favour of using the crypto APIs. This avoids the need to do conditional compilation of the quorum driver. It can simply report an error at file open file instead if the required hash algorithm isn't supported by QEMU. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1435770638-25715-8-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-08crypto: add a nettle cipher implementationDaniel P. Berrange
If we are linking to gnutls already and gnutls is built against nettle, then we should use nettle as a cipher backend in preference to our built-in backend. This will be used when linking against some GNUTLS 2.x versions and all GNUTLS 3.x versions. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1435770638-25715-7-git-send-email-berrange@redhat.com> [Change "#elif" to "#elif defined". - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-08crypto: add a gcrypt cipher implementationDaniel P. Berrange
If we are linking to gnutls already and gnutls is built against gcrypt, then we should use gcrypt as a cipher backend in preference to our built-in backend. This will be used when linking against GNUTLS 1.x and many GNUTLS 2.x versions. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1435770638-25715-6-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-07qga: added GuestPCIAddress informationMichael Roth
PCIAddress inforfation is obtained via SetupApi, which provides the information about address, bus, etc. We look throught entire device tree in the system and try to find device object for given volume. For this PDO SetupDiGetDeviceRegistryProperty is called, which reads PCI configuration for a given devicei if it is possible. This is the most convinient way for a userspace service. The lookup is performed for every volume available. However, this information is not mandatory for vss-provider. In order to use SetupApi we need to notify linker about it. We do not need to install additional libs, so we do not make separate configuration option to use libsetupapi.su SetupApi gives as the same information as kernel driver with IRP_MN_QUERY_INTERFACE. https://support.microsoft.com/en-us/kb/253232 Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Eric Blake <eblake@redhat.com> CC: Michael Roth <mdroth@linux.vnet.ibm.com> * stub out get_pci_info if !CONFIG_QGA_NTDDSCSI Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-07-07configure: add configure check for ntdddisk.hMichael Roth
This header file provides w32 ioctl definitions for working with disk devices. Older versions of mingw do not expose this in a useable way, so add a configure check and report it via CONFIG_QGA_NTDDSCSI. Subsequent patches will use this macro to stub out functionality that relies on this in cases where it's not available. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-07-07qga: add win32 library iphlpapiKirk Allan
Add the iphlpapi library to use APIs such as GetAdaptersInfo and GetAdaptersAddresses. Signed-off-by: Kirk Allan <kallan@suse.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-07-07crypto: introduce new module for computing hash digestsDaniel P. Berrange
Introduce a new crypto/ directory that will (eventually) contain all the cryptographic related code. This initially defines a wrapper for initializing gnutls and for computing hashes with gnutls. The former ensures that gnutls is guaranteed to be initialized exactly once in QEMU regardless of CLI args. The block quorum code currently fails to initialize gnutls so it only works by luck, if VNC server TLS is not requested. The hash APIs avoids the need to litter the rest of the code with preprocessor checks and simplifies callers by allocating the correct amount of memory for the requested hash. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1435770638-25715-2-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-26Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio, pci fixes, enhancements Almost exclusively bugfixes, though in this case, we are adding functionality to the pxb in order to make OVMF work on it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri Jun 26 14:43:27 2015 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: Fix glib_subprocess test hw/pci-bridge: format special OFW unit address for PXB host hw/core: explicit OFW unit address callback for SysBusDeviceClass hw/pci-bridge: disable SHPC in PXB hw/pci-bridge: introduce "shpc" property hw/pci: introduce shpc_present() helper function hw/pci-bridge: add macro for "msi" property hw/pci-bridge: add macro for "chassis_nr" property hw/pci-bridge: expose _test parameter in SHPC_VMSTATE() migration: introduce VMSTATE_BUFFER_UNSAFE_INFO_TEST() add pci-bridge-seat pc: cleanup and convert TMP ACPI device description to AML API MAINTAINERS: add ACPI entry vhost: correctly pass error to caller in vhost_dev_enable_notifiers() balloon: add a feature bit to let Guest OS deflate balloon on oom qdev: fix OVERFLOW_BEFORE_WIDEN virito-pci: fix OVERRUN problem Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-24Fix glib_subprocess testDr. David Alan Gilbert
A typo means that the tests dependent on glib with subprocess support are never run. Fixes: 9d41401b90fa10b335d2e739149d36437cfbf622 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-23configure: rearrange --help and consolidate enable/disable togetherMichael Tokarev
This is an attempt to rearrange configure --help output a bit and consolidate pairs of --enable/disable into its own section. After this, help text is easier to sort, manage and read. More descriptive text can be added as well, since we now have more space. While at it, mention en/dis-able-vte. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23configure: append --extra-ldflags to LDFLAGSAlex Bennée
The help text says --extra-ldflags is appended to LDFLAGS so make it so. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-01 23:45:46 +0000