aboutsummaryrefslogtreecommitdiff
path: root/configure
AgeCommit message (Collapse)Author
2016-06-07configure: Use $(..) instead of deprecated `..`Stefan Weil
This fixes these warnings from shellcheck: ^-- SC2006: Use $(..) instead of deprecated `..` Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-06-07Fix linking relocatable objects on SparcJames Clarke
On Sparc, gcc implicitly passes --relax to the linker, but -r is incompatible with this. Therefore, if --no-relax is supported, it should be passed to the linker. Signed-off-by: James Clarke <jrtc27@jrtc27.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-06-03audio: pa: Set volume of recording stream instead of recording devicePeter Krempa
Since pulseaudio 1.0 it's possible to set the individual stream volume rather than setting the device volume. With this, setting hardware mixer of a emulated sound card doesn't mess up the volume configuration of the host. A side effect is that this limits compatible pulseaudio version to 1.0 which was released on 2011-09-27. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 78853815be2069971b89b3a2e3181837064dd8f3.1462962512.git.pkrempa@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-05-23configure: Allow builds with extra warningsStefan Weil
The clang compiler supports a useful compiler option -Weverything, and GCC also has other warnings not enabled by -Wall. If glib header files trigger a warning, however, testing glib with -Werror will always fail. A size mismatch is also detected without -Werror, so simply remove it. Cc: qemu-stable@nongnu.org Signed-off-by: Stefan Weil <sw@weilnetz.de> Message-Id: <1461879221-13338-1-git-send-email-sw@weilnetz.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-18configure: Use uniform description for devel packagesStefan Weil
As all other devel packages are written in the form "name devel", use this form for libcap devel and libattr devel, too. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-11configure: support vte-2.91Cole Robinson
vte >= 0.37 expores API version 2.91, which is where all the active development is. qemu builds and runs fine with that version, so use it if it's available. Signed-off-by: Cole Robinson <crobinso@redhat.com> Message-id: b4f0375647f7b368d3dbd3834aee58cb0253566a.1462557436.git.crobinso@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-05-11configure: report SDL versionCole Robinson
Signed-off-by: Cole Robinson <crobinso@redhat.com> Message-id: 98e4a3b98dc824bfaff96db43b172272c780c15f.1462557436.git.crobinso@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-05-11configure: report GTK versionCole Robinson
Signed-off-by: Cole Robinson <crobinso@redhat.com> Message-id: 4c464e20d69fdcf21927ceed31a8d749b4af0c49.1462557436.git.crobinso@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-05-11configure: add echo_version helperCole Robinson
Simplifies printing library versions, dependent on if the library was even found Signed-off-by: Cole Robinson <crobinso@redhat.com> Message-id: 3c9ab16123e06bb4109771ef6ee8acd82d449ba0.1462557436.git.crobinso@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-05-11configure: error on unknown --with-sdlabi valueCole Robinson
I accidentally tried --with-sdlabi="1.0", and it failed much later in a weird way. Instead, throw an error if the value isn't in our whitelist. Signed-off-by: Cole Robinson <crobinso@redhat.com> Message-id: 60e4822e17697d257a914df03bdb9fff4b4c0490.1462557436.git.crobinso@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-05-11configure: build SDL if only SDL2 availableCole Robinson
Right now if SDL2 is installed but not SDL1, default configure will entirely disable SDL. Check upfront for SDL2 using pkg-config, but still prefer SDL1 if both versions are installed. Signed-off-by: Cole Robinson <crobinso@redhat.com> Message-id: c9e570b5964d128a3595efe3170129a3da459776.1462557436.git.crobinso@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-05-02configure: Check if struct fsxattr is available from linux headerJan Vesely
Fixes build failure with --enable-xfsctl and new linux headers (>=4.5) and older xfsprogs(<4.5): In file included from /usr/include/xfs/xfs.h:38:0, from /var/tmp/portage/app-emulation/qemu-2.5.0-r1/work/qemu-2.5.0/block/raw-posix.c:97: /usr/include/xfs/xfs_fs.h:42:8: error: redefinition of ‘struct fsxattr’ struct fsxattr { ^ In file included from /var/tmp/portage/app-emulation/qemu-2.5.0-r1/work/qemu-2.5.0/block/raw-posix.c:60:0: /usr/include/linux/fs.h:155:8: note: originally defined here struct fsxattr { This is really a bug in the system headers, but we can work around it by defining HAVE_FSXATTR in the QEMU headers if linux/fs.h provides the struct, so that xfs_fs.h doesn't try to define it as well. CC: qemu-trivial@nongnu.org CC: Markus Armbruster <armbru@redhat.com> CC: Peter Maydell <peter.maydell@linaro.org> CC: Stefan Weil <sw@weilnetz.de> Tested-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Jan Vesely <jano.vesely@gmail.com> [PMM: adjusted commit message, comments] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-19block/gluster: prevent data loss after i/o errorJeff Cody
Upon receiving an I/O error after an fsync, by default gluster will dump its cache. However, QEMU will retry the fsync, which is especially useful when encountering errors such as ENOSPC when using the werror=stop option. When using caching with gluster, however, the last written data will be lost upon encountering ENOSPC. Using the write-behind-cache xlator option of 'resync-failed-syncs-after-fsync' should cause gluster to retain the cached data after a failed fsync, so that ENOSPC and other transient errors are recoverable. Unfortunately, we have no way of knowing if the 'resync-failed-syncs-after-fsync' xlator option is supported, so for now close the fd and set the BDS driver to NULL upon fsync error. Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-04-16configure: Enable seccomp sandbox for MIPSJames Hogan
Enable seccomp on MIPS since libseccomp version 2.2.0 when MIPS support was first added. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Acked-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
2016-03-30crypto: do an explicit check for nettle pbkdf functionsDaniel P. Berrange
Support for the PBKDF functions in nettle was not introduced until version 2.6. Some distros QEMU targets have older versions and thus lack PBKDF support. Address this by doing a check in configure for the desired function and then skipping compilation of the nettle-pbkdf.o module Reported-by: Wen Congyang <wency@cn.fujitsu.com> Tested-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-24Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Log filtering from Alex and Peter * Chardev fix from Marc-André * config.status tweak from David * Header file tweaks from Markus, myself and Veronia (Outreachy candidate) * get_ticks_per_sec() removal from Rutuja (Outreachy candidate) * Coverity fix from myself * PKE implementation from myself, based on rth's XSAVE support # gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (28 commits) target-i386: implement PKE for TCG config.status: Pass extra parameters char: translate from QIOChannel error to errno exec: fix error handling in file_ram_alloc cputlb: modernise the debug support qemu-log: support simple pid substitution for logs target-arm: dfilter support for in_asm qemu-log: dfilter-ise exec, out_asm, op and opt_op qemu-log: new option -dfilter to limit output qemu-log: Improve the "exec" TB execution logging qemu-log: Avoid function call for disabled qemu_log_mask logging qemu-log: correct help text for -d cpu tcg: pass down TranslationBlock to tcg_code_gen util: move declarations out of qemu-common.h Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND hw: explicitly include qemu-common.h and cpu.h include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h Move ParallelIOArg from qemu-common.h to sysemu/char.h Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: scripts/clean-includes
2016-03-24config.status: Pass extra parametersDr. David Alan Gilbert
This allows you to do: ./config.status --the-option-you-forgot Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1452599928-7471-1-git-send-email-dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22wxx: Add support for ncursesStefan Weil
We used to support only pdcurses for Windows, but recently Cygwin added mingw64-i686-ncurses and mingw64-x86_64-ncurses packages which are supported now, too. Signed-off-by: Stefan Weil <sw@weilnetz.de>
2016-03-17crypto: add support for PBKDF2 algorithmDaniel P. Berrange
The LUKS data format includes use of PBKDF2 (Password-Based Key Derivation Function). The Nettle library can provide an implementation of this, but we don't want code directly depending on a specific crypto library backend. Introduce a new include/crypto/pbkdf.h header which defines a QEMU API for invoking PBKDK2. The initial implementations are backed by nettle & gcrypt, which are commonly available with distros shipping GNUTLS. The test suite data is taken from the cryptsetup codebase under the LGPLv2.1+ license. This merely aims to verify that whatever backend we provide for this function in QEMU will comply with the spec. Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-17crypto: add cryptographic random byte sourceDaniel P. Berrange
There are three backend impls provided. The preferred is gnutls, which is backed by nettle in modern distros. The gcrypt impl is provided for cases where QEMU build against gnutls is disabled, but crypto is still desired. No nettle impl is provided, since it is non-trivial to use the nettle APIs for random numbers. Users of nettle should ensure gnutls is enabled for QEMU. Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-08configure: detect ifunc and avx2 attributeLiang Li
Detect if the compiler can support the ifun and avx2, if so, set CONFIG_AVX2_OPT which will be used to turn on the avx2 instruction optimization. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Liang Li <liang.z.li@intel.com> Message-Id: <1457416397-26671-2-git-send-email-liang.z.li@intel.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-02-23configure: add dma-buf support detection.Gerd Hoffmann
Set CONFIG_OPENGL_DMABUF in case both mesa and libepoxy are new enough to have support for dma-buf import/export. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2016-02-12Merge remote-tracking branch 'remotes/sstabellini/tags/xen-2016-02-12' into ↵Peter Maydell
staging Xen 2016-02-12 # gpg: Signature made Fri 12 Feb 2016 17:28:09 GMT using RSA key ID 70E1AE90 # gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" * remotes/sstabellini/tags/xen-2016-02-12: xen: Drop __XEN_LATEST_INTERFACE_VERSION__ checks from prior to Xen 4.2 xen: move xenforeignmemory compat layer into common place xen: drop XenXC and associated interface wrappers xen: drop xen_xc_hvm_inject_msi wrapper xen: drop support for Xen 4.1 and older. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-11remove libtool supportMichael Tokarev
Libtool support was needed to build shared library for libcacard. Now there's no need to use libtool, and since the build system is already complicated enough, we have a way to slightly de-complicate it. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
2016-02-10xen: drop support for Xen 4.1 and older.Ian Campbell
Xen 4.2 become unsupported upstream in 09/2015 (see http://wiki.xen.org/wiki/Xen_Release_Features). However as far as the interfaces provided by the toolstack libraries go 4.2 and 4.3 are indistinguishable. Therefore drop support for Xen 4.1 and earlier which removes a whole pile of compatibility code which makes future work (to use stable library interfaces provided by upstream) more difficult. In particular all supported versions now use a pointer as a libxc handle (4.1 and earlier used an integer, resulting in various shim layers). Also Xen 4.2 was the first version of Xen to formally support upstream QEMU (as a preview) so that makes sense as a cut-off now. This change drops all the configure-y and resulting ifdefs in a mostly mechanical way. A follow up will refactor wrappers which are now unused. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2016-02-09configure: sanity check the glib library that pkg-config findsDaniel P. Berrange
Developers on 64-bit machines will often try to perform a 32-bit build of QEMU by running ./configure --extra-cflags="-m32" Unfortunately if PKG_CONFIG_LIBDIR is not set to point to the location of the 32-bit pkg-config files, then configure will silently pick up the 64-bit pkg-config files and still succeed. This causes a problem for glib because it means QEMU will be pulling in /usr/lib64/glib-2.0/include/glibconfig.h instead of /usr/lib/glib-2.0/include/glibconfig.h This causes problems because the 'gsize' type (defined as 'unsigned long') will no longer be fully compatible with the 'size_t' type (defined as 'unsigned int'). Although both are the same size, the compiler refuses to allow casts from 'unsigned long *' to 'unsigned int *' as they are different pointer types. This results in non-obvious compiler errors when building QEMU eg qga/commands-posix.c: In function ‘qmp_guest_set_user_password’: qga/commands-posix.c:1912:55: error: passing argument 2 of ‘g_base64_decode’ from incompatible pointer type [-Werror=incompatible-pointer-types] rawpasswddata = (char *)g_base64_decode(password, &rawpasswdlen); ^ In file included from /usr/include/glib-2.0/glib.h:35:0, from qga/commands-posix.c:14: /usr/include/glib-2.0/glib/gbase64.h:52:9: note: expected ‘gsize * {aka long unsigned int *}’ but argument is of type ‘size_t * {aka unsigned int *}’ guchar *g_base64_decode (const gchar *text, ^ cc1: all warnings being treated as errors To detect this problem, add a check to configure that verifies that GLIB_SIZEOF_SIZE_T matches sizeof(size_t). If this fails print a warning suggesting that the dev probably needs to set PKG_CONFIG_LIBDIR. On Fedora x86_64 it passes with any of: # ./configure # PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig ./configure --extra-cflags="-m32" # PKG_CONFIG_LIBDIR=/usr/lib64/pkgconfig ./configure --extra-cflags="-m64" And fails with a mis-match # PKG_CONFIG_LIBDIR=/usr/lib64/pkgconfig ./configure --extra-cflags="-m32" # PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig ./configure --extra-cflags="-m64" ERROR: sizeof(size_t) doesn't match GLIB_SIZEOF_SIZE_T. You probably need to set PKG_CONFIG_LIBDIR to point to the right pkg-config files for your build target Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1453885245-15562-1-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-03trace: switch default backend to "log"Paolo Bonzini
This enables integration with other QEMU logging facilities. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1452174932-28657-11-git-send-email-den@openvz.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-03trace: convert stderr backend to logPaolo Bonzini
[Also update .travis.yml --enable-trace-backends=stderr --Stefan] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1452174932-28657-10-git-send-email-den@openvz.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-01-30target-ppc: gdbstub: Add VSX supportAnton Blanchard
Add the XML and functions to get and set VSX registers. Signed-off-by: Anton Blanchard <anton@samba.org> (fixed little-endian guests) Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-01-26xen: make it possible to build without the Xen PV domain builderIan Campbell
Until the previous patch this relied on xc_fd(), which was only implemented for Xen 4.0 and earlier. Given this wasn't working since Xen 4.0 I have marked this as disabled by default. Removing this support drops the use of a bunch of symbols from libxenctrl, specifically: - xc_domain_create - xc_domain_destroy - xc_domain_getinfo - xc_domain_max_vcpus - xc_domain_setmaxmem - xc_domain_unpause - xc_evtchn_alloc_unbound - xc_linux_build This is another step towards only using Xen libraries which provide a stable inteface. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2016-01-26xen: Use stable library interfaces when they are available.Ian Campbell
In Xen 4.7 we are refactoring parts libxenctrl into a number of separate libraries which will provide backward and forward API and ABI compatiblity. Specifically libxenevtchn, libxengnttab and libxenforeignmemory. Previous patches have already laid the groundwork for using these by switching the existing compatibility shims to reflect the intefaces to these libraries. So all which remains is to update configure to detect the libraries and enable their use. Although they are notionally independent we take an all or nothing approach to the three libraries since they were added at the same time. The only non-obvious bit is that we now open a proper xenforeignmemory handle for xen_fmem instead of reusing the xen_xc handle. Build tested with 4.0 .. 4.6 (inclusive) and the patches targetting 4.7 which adds these libraries. This uses CONFIG_XEN_CTRL_INTERFACE_VERSION == 471 to cover the introduction of these new interfaces. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2016-01-11configure: fix trace backend checkMarc-André Lureau
Found thanks to shellcheck! Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-12-18configure: Fix shell syntax to placate OpenBSD's pdkshPeter Maydell
Unfortunately the OpenBSD pdksh does not like brackets inside the right part of a ${variable+word} parameter expansion: $ echo "${a+($b)}" ksh: ${a+($b)}": bad substitution though both bash and dash accept them. In any case this line was causing odd output in the case where nettle is not present: nettle no () (because if nettle is not present then $nettle will be "no", not a null string or unset). Rewrite it to just use an if. This bug was originally introduced in becaeb726 and was present in the 2.4.0 release. Fixes: https://bugs.launchpad.net/qemu/+bug/1525682 Reported-by: Dmitrij D. Czarkoff Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1450105357-8516-1-git-send-email-peter.maydell@linaro.org
2015-12-18io: add QIOChannelSocket classDaniel P. Berrange
Implement a QIOChannel subclass that supports sockets I/O. The implementation is able to manage a single socket file descriptor, whether a TCP/UNIX listener, TCP/UNIX connection, or a UDP datagram. It provides APIs which can listen and connect either asynchronously or synchronously. Since there is no asynchronous DNS lookup API available, it uses the QIOTask helper for spawning a background thread to ensure non-blocking operation. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-04configure: use appropriate code fragment for -fstack-protector checksRodrigo Rebello
The check for stack-protector support consisted in compiling and linking the test program below (output by function write_c_skeleton()) with the compiler flag -fstack-protector-strong first and then with -fstack-protector-all if the first one failed to work: int main(void) { return 0; } This caused false positives when using certain toolchains in which the compiler accepted -fstack-protector-strong but no support was provided by the C library, since for this stack-protector variant the compiler emits canary code only for functions that meet specific conditions (local arrays, memory references to local variables, etc.) and the code fragment under test included none of them (hence no stack protection code generated, no link failure). This fix changes the test program used for -fstack-protector checks to include a function that meets conditions which cause the compiler to generate canary code in all variants. Signed-off-by: Rodrigo Rebello <rprebello@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-12-04configure: Diagnose broken linkers directlyPeter Maydell
Currently if the user's compiler works for creating .o files but their linker is broken such that compiling an executable from a C file does not work, we will report a misleading error message about the compiler not supporting __thread (since that happens to be the first test we run which requires a working linker). Explicitly check that compile_prog works as well as compile_object, so that people whose toolchain setup is broken get a more helpful error message. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-11-30w32: Use gcc option -mthreadsStefan Weil
QEMU uses threads / coroutines, therefore support for thread local storage and thread safe libraries (-D_MT) must be enabled by using -mthreads. Signed-off-by: Stefan Weil <sw@weilnetz.de>
2015-11-25Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20151125' into ↵Peter Maydell
staging Xen 2015/11/25 # gpg: Signature made Wed 25 Nov 2015 11:19:26 GMT using RSA key ID 70E1AE90 # gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" * remotes/sstabellini/tags/xen-20151125: xen_disk: Remove ioreq.postsync xen: fix usage of xc_domain_create in domain builder Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-19Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
vhost, pc: fixes for 2.5 Fixes all over the place. This also re-enables a test we disabled in 2.5 cycle now that there's a way not to get a warning from it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 19 Nov 2015 13:27:43 GMT using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: exec: silence hugetlbfs warning under qtest tests: re-enable vhost-user-test acpi: fix buffer overrun on migration vhost-user: fix log size vhost-user: ignore qemu-only features specs/vhost-user: fix spec to match reality tests/vhost-user-bridge: implement logging of dirty pages i440fx: print an error message if user tries to enable iommu q35: Check propery to determine if iommu is set vhost-user: start/stop all rings vhost-user: print original request on error vhost-user-test: support VHOST_USER_SET_VRING_ENABLE vhost-user: update spec description vhost: don't send RESET_OWNER at stop vhost: let SET_VRING_ENABLE message depends on protocol feature Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-19tests: re-enable vhost-user-testMarc-André Lureau
Commit 7fe34ca9c2e actually disabled vhost-user-test altogether, since CONFIG_VHOST_NET is a per-target config variable. tests/vhost-user-test is already x86/x64 softmmu specific test, in order to enable it correctly, kvm & vhost-net are also conditions. To check that, set CONFIG_VHOST_NET_TEST_$target when kvm is also enabled. Since "check-qtest-x86_64-y = $(check-qtest-i386-y)", avoid duplication when both x86 & x64 are enabled. Other targets than x86 aren't enabled yet, and is intentionally left as a future improvement, since I can't easily test those. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-11-16seccomp: loosen library version dependencydann frazier
Drop the libseccomp required version back to 2.1.0, restoring the ability to build w/ --enable-seccomp on Ubuntu 14.04. Commit 4cc47f8b3cc4f32586ba2f7fce1dc267da774a69 tightened the dependency on libseccomp from version 2.1.0 to 2.1.1. This broke building on Ubuntu 14.04, the current Ubuntu LTS release. The commit message didn't mention any specific functional need for 2.1.1, just that it was the most recent stable version at the time. I reviewed the changes between 2.1.0 and 2.1.1, but it looks like that update just contained minor fixes and cleanups - no obvious (to me) new interfaces or critical bug fixes. Signed-off-by: dann frazier <dann.frazier@canonical.com> Acked-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
2015-11-16configure: arm/aarch64: allow enable-seccompAndrew Jones
This is a revert of ae6e8ef11e6cb, but with a bit of refactoring, and also specifically adding arm/aarch64, rather than all architectures. Currently, libseccomp code appears to also support mips, ppc, and s390. We could therefore allow qemu to enable seccomp for those platforms as well, with additional configure patches, given they're tested and proven to work. Signed-off-by: Andrew Jones <drjones@redhat.com> Acked-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
2015-11-13xen: fix usage of xc_domain_create in domain builderRoger Pau Monne
Due to the addition of HVMlite and the requirement to always provide a valid xc_domain_configuration_t, xc_domain_create now always takes an arch domain config, which can be NULL in order to mimic previous behaviour. Add a small stub called xen_domain_create that encapsulates the correct call to xc_domain_create depending on the libxc version detected. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-11-12configure: check for $cxx before useJohn Snow
I broke this when adding checks for clang++. Reported-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1447345789-840-1-git-send-email-jsnow@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-09configure: Don't disable optimization for non-fortify buildsPeter Maydell
Commit b553a0428014636bc inadvertently disabled optimization for all non-fortify builds. Fix this bug so we only do an unoptimized build if we want debug. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1447082049-25099-1-git-send-email-peter.maydell@linaro.org
2015-11-06configure: remove help string for 'vnc-tls' optionDaniel P. Berrange
The '--enable-vnc-tls' option to configure was removed in commit 3e305e4a4752f70c0b5c3cf5b43ec957881714f7 Author: Daniel P. Berrange <berrange@redhat.com> Date: Thu Aug 6 14:39:32 2015 +0100 ui: convert VNC server to use QCryptoTLSSession This removes the corresponding help string. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-11-06configure: add missing --disable-modules optionStefan Hajnoczi
According to ./configure all options should have both --enable-foo and --disable-foo: # Always add --enable-foo and --disable-foo command line args. # Distributions want to ensure that several features are compiled in, and it # is impossible without a --enable-foo that exits if a feature is not found. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1446473183-24250-1-git-send-email-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-05Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Guest ABI fixes for PC machines (hw_version) * Fixes for recent Perl * John Snow's configure fixes * file-backed RAM improvements (Igor, Pavel) * -Werror=clobbered fixes (Stefan) * Kill -d ioport * Fix qemu-system-s390x * Performance improvement for kvmclock migration # gpg: Signature made Thu 05 Nov 2015 13:42:27 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: iscsi: Translate scsi sense into error code Revert "Introduce cpu_clean_all_dirty" kvmclock: add a new function to update env->tsc. configure: disable FORTIFY_SOURCE under clang backends/hostmem-file: Allow to specify full pathname for backing file configure: disallow ccache during compile tests cpu-exec: Fix compiler warning (-Werror=clobbered) memory: call begin, log_start and commit when registering a new listener megasas: Use qemu_hw_version() instead of QEMU_VERSION osdep: Rename qemu_{get, set}_version() to qemu_{, set_}hw_version() pc: Set hw_version on all machine classes qemu-log: remove -d ioport ioport: do not use CPU_LOG_IOPORT target-i386: fix pcmpxstrx equal-ordered (strstr) mode scripts/text2pod.pl: Escape left brace file_ram_alloc: propagate error to caller instead of terminating QEMU Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-05configure: disable FORTIFY_SOURCE under clangJohn Snow
Some versions of clang may have difficulty compiling glibc headers when -D_FORTIFY_SOURCE is used. For example, Clang++ 3.5.0-9.fc22 cannot compile glibc's stdio headers when -D_FORTIFY_SOURCE=2 is used. This manifests currently as build failures with clang and any arm target. According to LLVM dev Richard Smith, clang does not target or support FORTIFY_SOURCE + glibc, and it should not be relied on. "It's still an unsupported combination, and while it might compile, some of the checks are unlikely to work because they require a frontend inliner to be useful" See: http://lists.llvm.org/pipermail/cfe-dev/2015-November/045846.html Conclusion: disable fortify-source if we appear to be using clang instead of testing for compile success or failure, which may be incidental or not indicative of proper support of the feature. Signed-off-by: John Snow <jsnow@redhat.com> Message-Id: <1446583422-10153-1-git-send-email-jsnow@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04configure: disallow ccache during compile testsJohn Snow
If the user is using ccache during the configuration step, it may interfere with some of the configuration tests, particularly the "Is ccache interfering with macro analysis" step, which is a bit of a poetic problem. 1) Disallow ccache from reading from the cache during configure, but don't disable it entirely to allow us to see if it causes other problems. 2) Force off CCACHE_CPP2 during the ccache test to get a deterministic answer over whether or not we need to enable that feature later. Signed-off-by: John Snow <jsnow@redhat.com> Message-Id: <1446055000-29150-1-git-send-email-jsnow@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-11 18:43:26 +0000