aboutsummaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2024-01-09hw/arm: Add minimal support for the B-L475E-IOT01A boardInès Varhol
This commit adds a new B-L475E-IOT01A board using the STM32L475VG SoC as well as a dedicated documentation file. The implementation is derived from the Netduino Plus 2 machine. There are no peripherals implemented yet, only memory regions. Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240108135849.351719-3-ines.varhol@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-11-08default-configs: Add TARGET_XML_FILES definitionAkihiko Odaki
loongarch64-linux-user has references to XML files so include them. Fixes: d32688ecdb ("default-configs: Add loongarch linux-user support") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-Id: <20231030054834.39145-6-akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [AJB: remove base32 from list] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20231106185112.2755262-2-alex.bennee@linaro.org>
2023-11-07hw/ppc: Add emulation of AmigaOne XE boardBALATON Zoltan
The AmigaOne is a rebranded MAI Teron board that uses U-Boot firmware with patches to support AmigaOS and is very similar to pegasos2 so can be easily emulated sharing most code with pegasos2. The reason to emulate it is that AmigaOS comes in different versions for AmigaOne and PegasosII which only have drivers for one machine and firmware so these only run on the specific machine. Adding this board allows another AmigaOS version to be used reusing already existing peagasos2 emulation. (The AmigaOne was the first of these boards so likely most widespread which then inspired Pegasos that was later replaced with PegasosII due to problems with Articia S, so these have a lot of similarity. Pegasos mainly ran MorphOS while the PegasosII version of AmigaOS was added later and therefore less common than the AmigaOne version.) Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Tested-by: Rene Engel <ReneEngel80@emailn.de> Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-ID: <804935e7a5921548d630576159ae2c758fe6e275.1699382232.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-11-06target/hppa: Remove TARGET_HPPA64Richard Henderson
Allow both user-only and system mode to run pa2.0 cpus. Avoid creating a separate qemu-system-hppa64 binary; force the qemu-hppa binary to use TARGET_ABI32. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-10-25configs: Enable MTTCG for sparc, sparc64Richard Henderson
This will be of small comfort to sparc64, because both sun4u and sun4v board models force max_cpus = 1. But it does enable actual smp for sparc32 sun4m. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-10-18configure: move target-specific defaults to an external machine filePaolo Bonzini
Enable Windows-specific defaults with a machine file, so that related options can be automatically parsed and included in the help message. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-08-24target/loongarch: Add GDB support for loongarch32 modeJiajie Chen
GPRs and PC are 32-bit wide in loongarch32 mode. Signed-off-by: Jiajie Chen <c@jia.je> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Song Gao <gaosong@loongson.cn> Message-ID: <20230817093121.1053890-4-gaosong@loongson.cn> [PMD: Rebased, set gdb_num_core_regs] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230821125959.28666-9-philmd@linaro.org>
2023-07-14kconfig: Add PCIe devices to s390x machinesCédric Le Goater
It is useful to extend the number of available PCIe devices to KVM guests for passthrough scenarios and also to expose these models to a different (big endian) architecture. Introduce a new config PCIE_DEVICES to select models, Intel Ethernet adapters and one USB controller. These devices all support MSI-X which is a requirement on s390x as legacy INTx are not supported. Cc: Matthew Rosato <mjrosato@linux.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Thomas Huth <thuth@redhat.com> Signed-off-by: Cédric Le Goater <clg@redhat.com> Message-ID: <20230712080146.839113-1-clg@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-30arm/Kconfig: Keep Kconfig default entries in default.mak as documentationFabiano Rosas
When we moved the arm default CONFIGs into Kconfig and removed them from default.mak, we made it harder to identify which CONFIGs are selected by default in case users want to disable them. Bring back the default entries into default.mak, but keep them commented out. This way users can keep their workflows of editing default.mak to remove build options without needing to search through Kconfig. Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20230523180525.29994-3-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-18Hexagon (gdbstub): add HVX supportTaylor Simpson
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Co-authored-by: Brian Cain <bcain@quicinc.com> Signed-off-by: Brian Cain <bcain@quicinc.com> Co-authored-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com> Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com> Reviewed-by: Brian Cain <bcain@quicinc.com> Message-Id: <17cb32f34d469f705c3cc066a3583935352ee048.1683214375.git.quic_mathbern@quicinc.com>
2023-05-18Hexagon: add core gdbstub xml data for LLDBMatheus Tavares Bernardino
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Message-Id: <d25a3a79334d81f0e1ecfb438b6ee82585d02dc4.1683214375.git.quic_mathbern@quicinc.com>
2023-05-11target/sh4: Remove TARGET_ALIGNED_ONLYRichard Henderson
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-11target/nios2: Remove TARGET_ALIGNED_ONLYRichard Henderson
In gen_ldx/gen_stx, the only two locations for memory operations, mark the operation as either aligned (softmmu) or unaligned (user-only, as if emulated by the kernel). Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-11target/mips: Remove TARGET_ALIGNED_ONLYRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-05target/sparc: Remove TARGET_ALIGNED_ONLYRichard Henderson
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-05target/hppa: Remove TARGET_ALIGNED_ONLYRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-05target/alpha: Remove TARGET_ALIGNED_ONLYRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-02arm/Kconfig: Do not build TCG-only boards on a KVM-only buildFabiano Rosas
Move all the CONFIG_FOO=y from default.mak into "default y if TCG" statements in Kconfig. That way they won't be selected when CONFIG_TCG=n. I'm leaving CONFIG_ARM_VIRT in default.mak because it allows us to keep the two default.mak files not empty and keep aarch64-default.mak including arm-default.mak. That way we don't surprise anyone that's used to altering these files. With this change we can start building with --disable-tcg. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230426180013.14814-12-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-02arm/Kconfig: Always select SEMIHOSTING when TCG is presentFabiano Rosas
We are about to enable the build without TCG, so CONFIG_SEMIHOSTING and CONFIG_ARM_COMPATIBLE_SEMIHOSTING cannot be unconditionally set in default.mak anymore. So reflect the change in a Kconfig. Instead of using semihosting/Kconfig, use a target-specific file, so that the change doesn't affect other architectures which might implement semihosting in a way compatible with KVM. The selection from ARM_v7M needs to be removed to avoid a cycle during parsing. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230426180013.14814-11-farosas@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-04-28s390x/gdb: Split s390-virt.xmlIlya Leoshkevich
Both TCG and KVM emulate ckc, cputm, last_break and prefix, and it's quite useful to have them during debugging. Right now they are grouped together with KVM-only pp, pfault_token, pfault_select and pfault_compare in s390-virt.xml, and are not available when debugging TCG-emulated code. Move KVM-only registers into the new s390-virt-kvm.xml file. Advertise s390-virt.xml always, and the new s390-virt-kvm.xml only for KVM. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Message-Id: <20230314101813.174874-1-iii@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-03-06target/arm: Implement gdbstub pauth extensionRichard Henderson
The extension is primarily defined by the Linux kernel NT_ARM_PAC_MASK ptrace register set. The original gdb feature consists of two masks, data and code, which are used to mask out the authentication code within a pointer. Following discussion with Luis Machado, add two more masks in order to support pointers within the high half of the address space (i.e. TTBR1 vs TTBR0). Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1105 Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230227213329.793795-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-21target/microblaze: Add gdbstub xmlRichard Henderson
Mirroring the upstream gdb xml files, the two stack boundary registers are separated out. Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-02-11migration: Remove spurious filesJuan Quintela
I introduced spurious files on my tree during a rebase: commit ebfc57871506b3fe36cc41f69ee3ad31a34afd63 Author: Zhenzhong Duan <zhenzhong.duan@intel.com> Date: Mon Oct 17 15:53:51 2022 +0800 multifd: Fix flush of zero copy page send request Make IO channel flush call after the inflight request has been drained in multifd thread, or else we may missed to flush the inflight request. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> To make things worse, it appears like Zhenzhong is the one to blame. for(int i=0; i < 1000000; i++) { printf("I will not do rebases when I am tired\n"); } Sorry, Juan. Reviewed-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Juan Quintela <quintela@redhat.com>
2023-02-06multifd: Fix flush of zero copy page send requestZhenzhong Duan
Make IO channel flush call after the inflight request has been drained in multifd thread, or else we may missed to flush the inflight request. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2023-01-26configs/targets/nios2-softmmu: Add TARGET_NEED_FDT=y to the nios2 configThomas Huth
qemu-system-nios2 uses the functions from libfdt in hw/nios2/boot.c, so this target has to be marked with TARGET_NEED_FDT=y in its config file. Message-Id: <20230119125745.2028814-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-01-16Merge tag 'mips-20230113' of https://github.com/philmd/qemu into stagingPeter Maydell
MIPS patches queue A bunch of cleanups from various people. - Improved GT64120 on big-endian hosts - GT64120 north bridge and MC146818 RTC devices are now target independent - Bonito64 north bridge converted to 3-phase reset API - PCI refactors around PIIX devices - Support for nanoMIPS in bootloader generator API - New YAMON Malta Avocado test - Removal of 'trap and emulate' KVM support - System-specific QMP commands restricted to system emulation # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmPBekAACgkQ4+MsLN6t # wN4wjxAAtYxyt6WUBpiYfV/LnbQFpAsacues1Vhy9MPYEg5a/iuXWKvWtgRYvGww # qR0GVQH8rH7tgnCZK+ioq9jX+hvfBskP6CnKhxmb5zDGm7vP7jhhu8UFWY/EtBgq # 0zpNeLMXtnRJ6PBqo/nWFCVtcpDRZ6IkSbpGWkVkciRFc5n/2VCnlIj8k2I1oMvL # 11cp2xFQnaPReFXIpMjJHuHv1NObykdlvVg6wQo/A/4qIb8EvJQEPmePjG9Sf0i0 # v2dhnnxG9mze7+uq0dIC16x8Azko3N7dmtNlBU/aGb9OELwx35aux2M4dNDVogwn # DqL/Wsk54TFewECOfS48t/a/TqV8j/ISW1d/JvovBrN2KovmIAbtqHuMUqKVk5l0 # 23ZOIIPIYwmScZwIlkCIGUuIzFig1zhEmQcoEQaFe/B0oLB2eN/x0Bk9Yklo+i2A # WNiyiAj7k5492qEdndOySEEDVt6886F/+CdQ6QYF5Z1L/ELck7XHBH3mGDznWpPn # 6IURyVquPJx7ul62jSGI+Gc+qakNoahIhPo5O7hklOM9GwWNOWXHveyb7xjs7j+O # eWyVcet+o7hoHkCzmfbyTPySI4qCpF9fA42jqPhATwQPwmGXpbr+4BxUq3KtE43y # w9tEigwd4voN3dWLItVh6QE4in70osz3XHp93byvo8bHlS0huVY= # =oXX+ # -----END PGP SIGNATURE----- # gpg: Signature made Fri 13 Jan 2023 15:35:28 GMT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * tag 'mips-20230113' of https://github.com/philmd/qemu: (46 commits) scripts/git.orderfile: Display MAINTAINERS changes first target/mips: Restrict 'qapi-commands-machine.h' to system emulation hw/mips/boston: Rename MachineState 'mc' pointer to 'ms' hw/pci-host/bonito: Declare TYPE_BONITO_PCI_HOST_BRIDGE in header hw/pci-host/bonito: Use 'bonito_pci' for PCI function #0 code hw/pci-host/bonito: Use 'bonito_host' for PCI host bridge code hw/pci-host/bonito: Convert to 3-phase reset softmmu/rtc: Emit warning when using driftfix=slew on systems without mc146818 hw/rtc/mc146818rtc: Make the mc146818 RTC device target independent hw/core/qdev-properties-system: Allow the 'slew' policy only on x86 hw/intc: Extract the IRQ counting functions into a separate file hw/intc/i8259: Make using the isa_pic singleton more type-safe hw/usb/hcd-uhci: Introduce TYPE_ defines for device models hw/mips/Kconfig: Track Malta's PIIX dependencies via Kconfig hw/isa/piix4: Decouple INTx-to-LNKx routing which is board-specific hw/isa/piix3: Decouple INTx-to-LNKx routing which is board-specific hw/pci/pci: Factor out pci_bus_map_irqs() from pci_bus_irqs() hw/pci/pci_host: Trace config accesses on unexisting functions mips: Always include nanomips disassembler mips: Remove support for trap and emulate KVM ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-13hw/mips/Kconfig: Track Malta's PIIX dependencies via KconfigBernhard Beschow
Tracking dependencies via Kconfig seems much cleaner. Note that PIIX4 already depends on ACPI_PIIX4. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20230109172347.1830-8-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-01-13hw/mips/gt64xxx_pci: Let the GT64120 manage the lower 512MiB holePhilippe Mathieu-Daudé
Per the comment in the Malta board, the [0x0000.0000-0x2000.0000] range is decoded by the GT64120, so move the "empty_slot" there. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20221209151533.69516-3-philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-12hw/arm: Add Olimex H405Felipe Balbi
Olimex makes a series of low-cost STM32 boards. This commit introduces the minimum setup to support SMT32-H405. See [1] for details [1] https://www.olimex.com/Products/ARM/ST/STM32-H405/ Signed-off-by: Felipe Balbi <balbi@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20221230145733.200496-3-balbi@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-08i386, mips: Resolve redundant ACPI and APM dependenciesBernhard Beschow
Now that all ACPI controllers select the ACPI and APM dependencies themselves, these explicit dependencies became redundant. Remove them. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20221216130355.41667-7-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-10-31hw/isa/Kconfig: Fix dependencies of piix4 southbridgeBernhard Beschow
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20221022150508.26830-27-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-10-31hw/isa/vt82c686: Instantiate IDE function in host deviceBernhard Beschow
The IDE function is closely tied to the ISA function (e.g. the IDE interrupt routing happens there), so it makes sense that the IDE function is instantiated within the south bridge itself. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20220901114127.53914-7-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-10-17hw/ppc/meson: Allow e500 boards to be enabled separatelyBernhard Beschow
Gives users more fine-grained control over what should be compiled into QEMU. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20221003203142.24355-2-shentey@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-09-04target/openrisc: Enable MTTCGStafford Horne
This patch enables multithread TCG for OpenRISC. Since the or1k shared syncrhonized timer can be updated from each vCPU via helpers we use a mutex to synchronize updates. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-09-04hw/openrisc: Add the OpenRISC virtual machineStafford Horne
This patch adds the OpenRISC virtual machine 'virt' for OpenRISC. This platform allows for a convenient CI platform for toolchain, software ports and the OpenRISC linux kernel port. Much of this has been sourced from the m68k and riscv virt platforms. The platform provides: - OpenRISC SMP with up to 4 cpus - A virtio bus with up to 8 devices - Standard ns16550a serial - Goldfish RTC - SiFive TEST device for poweroff and reboot - Generated Device Tree to automatically configure the guest kernel Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-08-05target/loongarch: Update loongarch-fpu.xmlSong Gao
Rename loongarch-fpu64.xml to loongarch-fpu.xml and update loongarch-fpu.xml to match upstream GDB [1] [1]:https://github.com/bminor/binutils-gdb/blob/master/gdb/features/loongarch/fpu.xml Signed-off-by: Song Gao <gaosong@loongson.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220805033523.1416837-5-gaosong@loongson.cn>
2022-07-19hw/loongarch: Add fdt supportXiaojuan Yang
Add LoongArch flatted device tree, adding cpu device node, firmware cfg node, pcie node into it, and create fdt rom memory region. Now fdt info is not full since only uefi bios uses fdt, linux kernel does not use fdt. Loongarch Linux kernel uses acpi table which is full in qemu virt machine. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn> Message-Id: <20220712083206.4187715-7-yangxiaojuan@loongson.cn> [rth: Set TARGET_NEED_FDT, add fdt to meson.build] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-07-04default-configs: Add loongarch linux-user supportSong Gao
This patch adds loongarch64 linux-user default configs file. Signed-off-by: Song Gao <gaosong@loongson.cn> Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Message-Id: <20220624031049.1716097-13-gaosong@loongson.cn> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-28semihosting: Split out guestfd.cRichard Henderson
In arm-compat-semi.c, we have more advanced treatment of guest file descriptors than we do in other implementations. Split out GuestFD and related functions to a new file so that they can be shared. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-06target/loongarch: Add gdb support.Xiaojuan Yang
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220606124333.2060567-42-yangxiaojuan@loongson.cn> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-06hw/loongarch: Add support loongson3 virt machine type.Xiaojuan Yang
Emulate a 3A5000 board use the new loongarch instruction. 3A5000 belongs to the Loongson3 series processors. The board consists of a 3A5000 cpu model and the virt bridge. The host 3A5000 board is really complicated and contains many functions.Now for the tcg softmmu mode only part functions are emulated. More detailed info you can see https://github.com/loongson/LoongArch-Documentation Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220606124333.2060567-31-yangxiaojuan@loongson.cn> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-05-08hppa: use new CONFIG_HPPA_B160L option instead of CONFIG_DINO to build hppa ↵Mark Cave-Ayland
machine DINO refers to the GSC-PCI bridge device which will soon be handled separately, however the QEMU HPPA machine is actually based upon the HPPA B160L as indicated by the Linux kernel dmesg output when booted in qemu-system-hppa and the QEMU MAINTAINERS file. Update the machine configuration to use CONFIG_HPPA_B160L instead of CONFIG_DINO and also update the machine description accordingly. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220504092600.10048-13-mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-04-26target/nios2: Enable unaligned traps for system modeRichard Henderson
Unaligned traps are optional, but required with an mmu. Turn them on always, because the fallback behaviour undefined. Enable alignment checks in the config file. Unwind the guest pc properly from do_unaligned_access. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220421151735.31996-48-richard.henderson@linaro.org>
2022-04-06Replace TARGET_WORDS_BIGENDIANMarc-André Lureau
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1, and thus should always be defined to prevent misuse. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Suggested-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-26hw/openrisc/openrisc_sim: Add automatic device tree generationStafford Horne
Using the device tree means that qemu can now directly tell the kernel what hardware is configured rather than use having to maintain and update a separate device tree file. This patch adds automatic device tree generation support for the OpenRISC simulator. A device tree is built up based on the state of the configure openrisc simulator. This is then dumped to memory and the load address is passed to the kernel in register r3. Signed-off-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-09linux-user: Remove the deprecated ppc64abi32 targetThomas Huth
It's likely broken, and nobody cared for picking it up again during the deprecation phase, so let's remove this now. Since this is the last entry in deprecated_targets_list, remove the related code in the configure script, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Cédric Le Goater <clg@kaod.org> Acked-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20211215084958.185214-1-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220112112722.3641051-32-alex.bennee@linaro.org>
2022-01-13hw/display: Rename VGA_ISA_MM -> VGA_MMIOPhilippe Mathieu-Daudé
There is no ISA bus part in the MMIO VGA device, so rename: * hw/display/vga-isa-mm.c -> hw/display/vga-mmio.c * CONFIG_VGA_ISA_MM -> CONFIG_VGA_MMIO * ISAVGAMMState -> VGAMmioState * isa_vga_mm_init() -> vga_mmio_init() Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20211206224528.563588-2-f4bug@amsat.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-01-07bsd-user: add arm target buildWarner Losh
CC: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Warner Losh <imp@bsdimp.com> Acked-by: Kyle Evans <kevans@FreeBSD.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-03Merge remote-tracking branch 'remotes/rth/tags/pull-arm-20211102-2' into stagingRichard Henderson
Add nuvoton sd module for NPCM7XX Add gdb-xml for MVE More uses of tcg_constant_* in target/arm Fix parameter naming for default-bus-bypass-iommu Ignore cache operations to mmio in HVF # gpg: Signature made Tue 02 Nov 2021 02:23:53 PM EDT # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate] * remotes/rth/tags/pull-arm-20211102-2: hvf: arm: Ignore cache operations on MMIO hw/arm/virt: Rename default_bus_bypass_iommu target/arm: Use tcg_constant_i32() in gen_rev16() target/arm: Use tcg_constant_i64() in do_sat_addsub_64() target/arm: Use the constant variant of store_cpu_field() when possible target/arm: Introduce store_cpu_field_constant() helper target/arm: Use tcg_constant_i32() in op_smlad() target/arm: Advertise MVE to gdb when present tests/qtest/libqos: add SDHCI commands hw/arm: Attach MMC to quanta-gbs-bmc hw/arm: Add Nuvoton SD module to board hw/sd: add nuvoton MMC Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02target/arm: Advertise MVE to gdb when presentPeter Maydell
Cortex-M CPUs with MVE should advertise this fact to gdb, using the org.gnu.gdb.arm.m-profile-mve XML feature, which defines the VPR register. Presence of this feature also tells gdb to create pseudo-registers Q0..Q7, so we do not need to tell gdb about them separately. Note that unless you have a very recent GDB that includes this fix: http://patches-tcwg.linaro.org/patch/58133/ gdb will mis-print the individual fields of the VPR register as zero (but showing the whole thing as hex, eg with "print /x $vpr" will give the correct value). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20211101160814.5103-1-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-29 14:53:32 +0000