| Age | Commit message (Collapse) | Author |
|---|
|
When a management application manages node names there's no reason to
recurse into backing images in the output of query-named-block-nodes.
Add a parameter to the command which will return just the top level
structs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <4470f8c779abc404dcf65e375db195cd91a80651.1579509782.git.pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[mreitz: Fixed coding style]
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Block nodes that do not allow resizing should not share BLK_PERM_RESIZE.
It does not matter whether they are the first non-filter in their chain
or not.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
There is no good reason why we would allow external snapshots only on
the first non-filter node in a chain. Parent BDSs should not care
whether their child is replaced by a snapshot. (If they do care, they
should announce that via freezing the chain, which is checked in
bdrv_append() through bdrv_set_backing_hd().)
Before we had bdrv_is_first_non_filter() here (since 212a5a8f095), there
was a special function bdrv_check_ext_snapshot() that allowed snapshots
by default, but block drivers could override this. Only blkverify did
so, however.
It is not clear to me why blkverify would do so; maybe just so that the
testee block driver would not be replaced. The introducing commit
f6186f49e2c does not explain why. Maybe because 08b24cfe376 would have
been the correct solution? (Which adds a .supports_backing check.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-2-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Now that the error handling in the common block job is fixed, we can
expose the on-error option in QMP instead of hard-coding it as 'report'
in qmp_block_commit().
This fulfills the promise that the old comment in that function made,
even if a bit later than expected: "This will be part of the QMP
command, if/when the BlockdevOnError change for blkmirror makes it in".
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200214200812.28180-7-kwolf@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200120141858.587874-8-stefanha@redhat.com
Message-Id: <20200120141858.587874-8-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
external_snapshot_abort() calls to bdrv_set_backing_hd(), which
returns state->old_bs to the main AioContext, as it's intended to be
used then the BDS is going to be released. As that's not the case when
aborting an external snapshot, return it to the AioContext it was
before the call.
This issue can be triggered by issuing a transaction with two actions,
a proper blockdev-snapshot-sync and a bogus one, so the second will
trigger a transaction abort. This results in a crash with an stack
trace like this one:
#0 0x00007fa1048b28df in __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
#1 0x00007fa10489ccf5 in __GI_abort () at abort.c:79
#2 0x00007fa10489cbc9 in __assert_fail_base
(fmt=0x7fa104a03300 "%s%s%s:%u: %s%sAssertion `%s' failed.\n%n", assertion=0x5572240b44d8 "bdrv_get_aio_context(old_bs) == bdrv_get_aio_context(new_bs)", file=0x557224014d30 "block.c", line=2240, function=<optimized out>) at assert.c:92
#3 0x00007fa1048aae96 in __GI___assert_fail
(assertion=assertion@entry=0x5572240b44d8 "bdrv_get_aio_context(old_bs) == bdrv_get_aio_context(new_bs)", file=file@entry=0x557224014d30 "block.c", line=line@entry=2240, function=function@entry=0x5572240b5d60 <__PRETTY_FUNCTION__.31620> "bdrv_replace_child_noperm") at assert.c:101
#4 0x0000557223e631f8 in bdrv_replace_child_noperm (child=0x557225b9c980, new_bs=new_bs@entry=0x557225c42e40) at block.c:2240
#5 0x0000557223e68be7 in bdrv_replace_node (from=0x557226951a60, to=0x557225c42e40, errp=0x5572247d6138 <error_abort>) at block.c:4196
#6 0x0000557223d069c4 in external_snapshot_abort (common=0x557225d7e170) at blockdev.c:1731
#7 0x0000557223d069c4 in external_snapshot_abort (common=0x557225d7e170) at blockdev.c:1717
#8 0x0000557223d09013 in qmp_transaction (dev_list=<optimized out>, has_props=<optimized out>, props=0x557225cc7d70, errp=errp@entry=0x7ffe704c0c98) at blockdev.c:2360
#9 0x0000557223e32085 in qmp_marshal_transaction (args=<optimized out>, ret=<optimized out>, errp=0x7ffe704c0d08) at qapi/qapi-commands-transaction.c:44
#10 0x0000557223ee798c in do_qmp_dispatch (errp=0x7ffe704c0d00, allow_oob=<optimized out>, request=<optimized out>, cmds=0x5572247d3cc0 <qmp_commands>) at qapi/qmp-dispatch.c:132
#11 0x0000557223ee798c in qmp_dispatch (cmds=0x5572247d3cc0 <qmp_commands>, request=<optimized out>, allow_oob=<optimized out>) at qapi/qmp-dispatch.c:175
#12 0x0000557223e06141 in monitor_qmp_dispatch (mon=0x557225c69ff0, req=<optimized out>) at monitor/qmp.c:120
#13 0x0000557223e0678a in monitor_qmp_bh_dispatcher (data=<optimized out>) at monitor/qmp.c:209
#14 0x0000557223f2f366 in aio_bh_call (bh=0x557225b9dc60) at util/async.c:117
#15 0x0000557223f2f366 in aio_bh_poll (ctx=ctx@entry=0x557225b9c840) at util/async.c:117
#16 0x0000557223f32754 in aio_dispatch (ctx=0x557225b9c840) at util/aio-posix.c:459
#17 0x0000557223f2f242 in aio_ctx_dispatch (source=<optimized out>, callback=<optimized out>, user_data=<optimized out>) at util/async.c:260
#18 0x00007fa10913467d in g_main_dispatch (context=0x557225c28e80) at gmain.c:3176
#19 0x00007fa10913467d in g_main_context_dispatch (context=context@entry=0x557225c28e80) at gmain.c:3829
#20 0x0000557223f31808 in glib_pollfds_poll () at util/main-loop.c:219
#21 0x0000557223f31808 in os_host_main_loop_wait (timeout=<optimized out>) at util/main-loop.c:242
#22 0x0000557223f31808 in main_loop_wait (nonblocking=<optimized out>) at util/main-loop.c:518
#23 0x0000557223d13201 in main_loop () at vl.c:1828
#24 0x0000557223bbfb82 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4504
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1779036
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Dirty map addition and removal functions are not acquiring to BDS
AioContext, while they may call to code that expects it to be
acquired.
This may trigger a crash with a stack trace like this one:
#0 0x00007f0ef146370f in __GI_raise (sig=sig@entry=6)
at ../sysdeps/unix/sysv/linux/raise.c:50
#1 0x00007f0ef144db25 in __GI_abort () at abort.c:79
#2 0x0000565022294dce in error_exit
(err=<optimized out>, msg=msg@entry=0x56502243a730 <__func__.16350> "qemu_mutex_unlock_impl") at util/qemu-thread-posix.c:36
#3 0x00005650222950ba in qemu_mutex_unlock_impl
(mutex=mutex@entry=0x5650244b0240, file=file@entry=0x565022439adf "util/async.c", line=line@entry=526) at util/qemu-thread-posix.c:108
#4 0x0000565022290029 in aio_context_release
(ctx=ctx@entry=0x5650244b01e0) at util/async.c:526
#5 0x000056502221cd08 in bdrv_can_store_new_dirty_bitmap
(bs=bs@entry=0x5650244dc820, name=name@entry=0x56502481d360 "bitmap1", granularity=granularity@entry=65536, errp=errp@entry=0x7fff22831718)
at block/dirty-bitmap.c:542
#6 0x000056502206ae53 in qmp_block_dirty_bitmap_add
(errp=0x7fff22831718, disabled=false, has_disabled=<optimized out>, persistent=<optimized out>, has_persistent=true, granularity=65536, has_granularity=<optimized out>, name=0x56502481d360 "bitmap1", node=<optimized out>) at blockdev.c:2894
#7 0x000056502206ae53 in qmp_block_dirty_bitmap_add
(node=<optimized out>, name=0x56502481d360 "bitmap1", has_granularity=<optimized out>, granularity=<optimized out>, has_persistent=true, persistent=<optimized out>, has_disabled=false, disabled=false, errp=0x7fff22831718) at blockdev.c:2856
#8 0x00005650221847a3 in qmp_marshal_block_dirty_bitmap_add
(args=<optimized out>, ret=<optimized out>, errp=0x7fff22831798)
at qapi/qapi-commands-block-core.c:651
#9 0x0000565022247e6c in do_qmp_dispatch
(errp=0x7fff22831790, allow_oob=<optimized out>, request=<optimized out>, cmds=0x565022b32d60 <qmp_commands>) at qapi/qmp-dispatch.c:132
#10 0x0000565022247e6c in qmp_dispatch
(cmds=0x565022b32d60 <qmp_commands>, request=<optimized out>, allow_oob=<optimized out>) at qapi/qmp-dispatch.c:175
#11 0x0000565022166061 in monitor_qmp_dispatch
(mon=0x56502450faa0, req=<optimized out>) at monitor/qmp.c:145
#12 0x00005650221666fa in monitor_qmp_bh_dispatcher
(data=<optimized out>) at monitor/qmp.c:234
#13 0x000056502228f866 in aio_bh_call (bh=0x56502440eae0)
at util/async.c:117
#14 0x000056502228f866 in aio_bh_poll (ctx=ctx@entry=0x56502440d7a0)
at util/async.c:117
#15 0x0000565022292c54 in aio_dispatch (ctx=0x56502440d7a0)
at util/aio-posix.c:459
#16 0x000056502228f742 in aio_ctx_dispatch
(source=<optimized out>, callback=<optimized out>, user_data=<optimized out>) at util/async.c:260
#17 0x00007f0ef5ce667d in g_main_dispatch (context=0x56502449aa40)
at gmain.c:3176
#18 0x00007f0ef5ce667d in g_main_context_dispatch
(context=context@entry=0x56502449aa40) at gmain.c:3829
#19 0x0000565022291d08 in glib_pollfds_poll () at util/main-loop.c:219
#20 0x0000565022291d08 in os_host_main_loop_wait
(timeout=<optimized out>) at util/main-loop.c:242
#21 0x0000565022291d08 in main_loop_wait (nonblocking=<optimized out>)
at util/main-loop.c:518
#22 0x00005650220743c1 in main_loop () at vl.c:1828
#23 0x0000565021f20a72 in main
(argc=<optimized out>, argv=<optimized out>, envp=<optimized out>)
at vl.c:4504
Fix this by acquiring the AioContext at qmp_block_dirty_bitmap_add()
and qmp_block_dirty_bitmap_add().
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1782175
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
bdrv_try_set_aio_context() requires that the old context is held, and
the new context is not held. Fix all the occurrences where it's not
done this way.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Issuing a blockdev-backup from qmp_blockdev_backup takes a slightly
different path than when it's issued from a transaction. In the code,
this is manifested as some redundancy between do_blockdev_backup() and
blockdev_backup_prepare().
This change unifies both paths, merging do_blockdev_backup() and
blockdev_backup_prepare(), and changing qmp_blockdev_backup() to
create a transaction instead of calling do_backup_common() direcly.
As a side-effect, now qmp_blockdev_backup() is executed inside a
drained section, as it happens when creating a blockdev-backup
transaction. This change is visible from the user's perspective, as
the job gets paused and immediately resumed before starting the actual
work.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Issuing a drive-backup from qmp_drive_backup takes a slightly
different path than when it's issued from a transaction. In the code,
this is manifested as some redundancy between do_drive_backup() and
drive_backup_prepare().
This change unifies both paths, merging do_drive_backup() and
drive_backup_prepare(), and changing qmp_drive_backup() to create a
transaction instead of calling do_backup_common() direcly.
As a side-effect, now qmp_drive_backup() is executed inside a drained
section, as it happens when creating a drive-backup transaction. This
change is visible from the user's perspective, as the job gets paused
and immediately resumed before starting the actual work.
Also fix tests 141, 185 and 219 to cope with the extra
JOB_STATUS_CHANGE lines.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Fix a couple of minor coding style issues in drive_backup_prepare.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We have two drivers (iscsi and file-posix) that (in some cases) return
success from their .bdrv_co_truncate() implementation if the block
device is larger than the requested offset, but cannot be shrunk. Some
callers do not want that behavior, so this patch adds a new parameter
that they can use to turn off that behavior.
This patch just adds the parameter and lets the block/io.c and
block/block-backend.c functions pass it around. All other callers
always pass false and none of the implementations evaluate it, so that
this patch does not change existing behavior. Future patches take care
of that.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190918095144.955-5-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Instead of using monitor_printf() to report errors, hmp_commit() should
use error_report() like other places do.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
This parameter has been deprecated since 2.12.0 and is eligible for
removal. Remove this parameter as it is actually completely ignored;
let's not give false hope.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191002232411.29968-1-jsnow@redhat.com
|
|
Add bs field to BdrvDirtyBitmap structure. Drop BlockDriverState
parameter from bitmap APIs where possible.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190916141911.5255-3-vsementsov@virtuozzo.com
[Rebased on top of block-copy. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
qmp_block_dirty_bitmap_add and do_block_dirty_bitmap_remove do acquire
aio context since 0a6c86d024c52b. But this is not enough: we also must
lock qcow2 mutex when access in-image metadata. Especially it concerns
freeing qcow2 clusters.
To achieve this, move qcow2_can_store_new_dirty_bitmap and
qcow2_remove_persistent_dirty_bitmap to coroutine context.
Since we work in coroutines in correct aio context, we don't need
context acquiring in blockdev.c anymore, drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190920082543.23444-4-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
It's more comfortable to not deal with local_err.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190920082543.23444-3-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Drop write notifiers and use filter node instead.
= Changes =
1. Add filter-node-name argument for backup qmp api. We have to do it
in this commit, as 257 needs to be fixed.
2. There are no more write notifiers here, so is_write_notifier
parameter is dropped from block-copy paths.
3. To sync with in-flight requests at job finish we now have drained
removing of the filter, we don't need rw-lock.
4. Block-copy is now using BdrvChildren instead of BlockBackends
5. As backup-top owns these children, we also move block-copy state
into backup-top's ownership.
= Iotest changes =
56: op-blocker doesn't shoot now, as we set it on source, but then
check on filter, when trying to start second backup.
To keep the test we instead can catch another collision: both jobs will
get 'drive0' job-id, as job-id parameter is unspecified. To prevent
interleaving with file-posix locks (as they are dependent on config)
let's use another target for second backup.
Also, it's obvious now that we'd like to drop this op-blocker at all
and add a test-case for two backups from one node (to different
destinations) actually works. But not in these series.
141: Output changed: prepatch, "Node is in use" comes from bdrv_has_blk
check inside qmp_blockdev_del. But we've dropped block-copy blk
objects, so no more blk objects on source bs (job blk is on backup-top
filter bs). New message is from op-blocker, which is the next check in
qmp_blockdev_add.
257: The test wants to emulate guest write during backup. They should
go to filter node, not to original source node, of course. Therefore we
need to specify filter node name and use it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191001131409.14202-6-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
bdrv_has_zero_init() only has meaning for newly created images or image
areas. If the mirror job itself did not create the image, it cannot
rely on bdrv_has_zero_init()'s result to carry any meaning.
This is the case for drive-mirror with mode=existing and always for
blockdev-mirror.
Note that we only have to zero-initialize the target with sync=full,
because other modes actually do not promise that the target will contain
the same data as the source after the job -- sync=top only promises to
copy anything allocated in the top layer, and sync=none will only copy
new I/O. (Which is how mirror has always handled it.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-3-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
We have detect_zeroes option, so at least for blockdev-backup user
should define it if zero-detection is needed. For drive-backup leave
detection enabled by default but do it through existing option instead
of open-coding.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190730163251.755248-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Accept bitmaps and sync policies for the other backup modes.
This allows us to do things like create a bitmap synced to a full backup
without a transaction, or start a resumable backup process.
Some combinations don't make sense, though:
- NEVER policy combined with any non-BITMAP mode doesn't do anything,
because the bitmap isn't used for input or output.
It's harmless, but is almost certainly never what the user wanted.
- sync=NONE is more questionable. It can't use on-success because this
job never completes with success anyway, and the resulting artifact
of 'always' is suspect: because we start with a full bitmap and only
copy out segments that get written to, the final output bitmap will
always be ... a fully set bitmap.
Maybe there's contexts in which bitmaps make sense for sync=none,
but not without more severe changes to the current job, and omitting
it here doesn't prevent us from adding it later.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
This is nicer to do in the unified QMP interface that we have now,
because it lets us use the right terminology back at the user.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
It is used to do transactional movement of the bitmap (which is
possible in conjunction with merge command). Transactional bitmap
movement is needed in scenarios with external snapshot, when we don't
want to leave copy of the bitmap in the base image.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190708220502.12977-3-jsnow@redhat.com
[Edited "since" version to 4.2 --js]
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Commit 0a6c86d024c52 returned these locks back to add/remove
functionality, to protect from intersection of persistent bitmap
related IO with other IO. But other bitmap-related functions called
here are unrelated to the problem, and there are no needs to keep these
calls inside critical sections.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190708220502.12977-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
With the "never" sync policy, we actually can utilize readonly bitmaps
now. Loosen the check at the QMP level, and tighten it based on
provided arguments down at the job creation level instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-19-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
We don't need or want a new sync mode for simple differences in
semantics. Create a new mode simply named "BITMAP" that is designed to
make use of the new Bitmap Sync Mode field.
Because the only bitmap sync mode is 'on-success', this adds no new
functionality to the backup job (yet). The old incremental backup mode
is maintained as a syntactic sugar for sync=bitmap, mode=on-success.
Add all of the plumbing necessary to support this new instruction.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Create a common core that comprises the actual meat of what the backup API
boundary needs to do, and then switch drive-backup to use it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
|
|
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
We forget to enable it for transaction .prepare, while it is already
enabled in do_drive_backup since commit a2d665c1bc362
"blockdev: loosen restrictions on drive-backup source node"
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190618140804.59214-1-vsementsov@virtuozzo.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Drop remaining users of bs->job:
1. assertions actually duplicated by assert(!bs->refcnt)
2. trace-point seems not enough reason to change stream_start to return
BlockJob pointer
3. Restricting creation of two jobs based on same bs is bad idea, as
3.1 Some jobs creates filters to be their main node, so, this check
don't actually prevent creating second job on same real node (which
will create another filter node) (but I hope it is restricted by
other mechanisms)
3.2 Even without bs->job we have two systems of permissions:
op-blockers and BLK_PERM
3.3 We may want to run several jobs on one node one day
And finally, drop bs->job pointer itself. Hurrah!
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We are going to remove bs->job pointer. Drop it's usage in
blockdev_mark_auto_del: instead of looking at bs->job let's check all
jobs for references to bs.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
There are error messages which refer to an overlay node as the snapshot.
That is wrong, those are two different things.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20190603202236.1342-3-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
in blockdev_backup_prepare, we check to make sure that the target is
associated with a compatible aio context. However, do_blockdev_backup is
called later and has some logic to move the target to a compatible
aio_context. The transaction version will fail certain commands
needlessly early as a result.
Allow blockdev_backup_prepare to simply call do_blockdev_backup, which
will ultimately decide if the contexts are compatible or not.
Note: the transaction version has always disallowed this operation since
its initial commit bd8baecd (2014), whereas the version of
qmp_blockdev_backup at the time, from commit c29c1dd312f, tried to
enforce the aio_context switch instead. It's not clear, and I can't see
from the mailing list archives at the time, why the two functions take a
different approach. It wasn't until later in efd7556708b (2016) that the
standalone version tried to determine if it could set the context or
not.
Reported-by: aihua liang <aliang@redhat.com>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1683498
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20190523170643.20794-2-jsnow@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Monitor commands can handle errors, so they can easily be converted to
using the safer bdrv_try_set_aio_context() function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds a new parameter to blk_new() which requires its callers to
declare from which AioContext this BlockBackend is going to be used (or
the locks of which AioContext need to be taken anyway).
The given context is only stored and kept up to date when changing
AioContexts. Actually applying the stored AioContext to the root node
is saved for another commit.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
If the bitmap can't be used for whatever reason, we skip putting down
the reference. Fix that.
In practice, this means that if you attempt to gracefully exit QEMU
after a backup command being rejected, bdrv_close_all will fail and
tell you some unpleasant things via assert().
Reported-by: aihua liang <aliang@redhat.com>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1703916
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
staging
Pull request
# gpg: Signature made Wed 29 May 2019 00:58:33 BST
# gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E
* remotes/jnsnow/tags/bitmaps-pull-request:
iotests: test external snapshot with bitmap copying
qapi: support external bitmaps in block-dirty-bitmap-merge
migration/dirty-bitmaps: change bitmap enumeration method
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add new optional parameter making possible to merge bitmaps from
different nodes. It is needed to maintain external snapshots during
incremental backup chain history.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190517152111.206494-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
We mandate that the source node must be a root node; but there's no reason
I am aware of that it needs to be restricted to such. In some cases, we need
to make sure that there's a medium present, but in the general case we can
allow the backup job itself to do the graph checking.
This patch helps improve the error message when you try to backup from
the same node more than once, which is reflected in the change to test
056.
For backups with bitmaps, it will also show a better error message that
the bitmap is in use instead of giving you something cryptic like "need
a root node."
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1707303
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20190521210053.8864-1-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Command line help explicitly requested by the user should be printed
to stdout, not stderr. We do elsewhere. Adjust -drive to match: use
qemu_printf() instead of error_printf(). Plain printf() would be
wrong because we need to print to the current monitor for "drive_add
... format=help".
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190417190641.26814-13-armbru@redhat.com>
|
|
There is no reason why the constraints we put on @replaces should be
limited to drive-mirror. Therefore, move the sanity checks from
qmp_drive_mirror() to blockdev_mirror_common() so they apply to
blockdev-mirror as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
staging
Pull request
# gpg: Signature made Tue 12 Mar 2019 20:23:08 GMT
# gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E
* remotes/jnsnow/tags/bitmaps-pull-request: (22 commits)
tests/qemu-iotests: add bitmap resize test 246
block/qcow2-bitmap: Allow resizes with persistent bitmaps
block/qcow2-bitmap: Don't check size for IN_USE bitmap
docs/interop/qcow2: Improve bitmap flag in_use specification
bitmaps: Fix typo in function name
block/dirty-bitmaps: implement inconsistent bit
block/dirty-bitmaps: disallow busy bitmaps as merge source
block/dirty-bitmaps: prohibit removing readonly bitmaps
block/dirty-bitmaps: prohibit readonly bitmaps for backups
block/dirty-bitmaps: add block_dirty_bitmap_check function
block/dirty-bitmap: add inconsistent status
block/dirty-bitmaps: add inconsistent bit
iotests: add busy/recording bit test to 124
blockdev: remove unused paio parameter documentation
block/dirty-bitmaps: move comment block
block/dirty-bitmaps: unify qmp_locked and user_locked calls
block/dirty-bitmap: explicitly lock bitmaps with successors
nbd: change error checking order for bitmaps
block/dirty-bitmap: change semantics of enabled predicate
block/dirty-bitmap: remove set/reset assertions against enabled bit
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# tests/qemu-iotests/group
|
|
This command allows reopening an arbitrary BlockDriverState with a
new set of options. Some options (e.g node-name) cannot be changed
and some block drivers don't allow reopening, but otherwise this
command is modelled after 'blockdev-add' and the state of the reopened
BlockDriverState should generally be the same as if it had just been
added by 'blockdev-add' with the same set of options.
One notable exception is the 'backing' option: 'x-blockdev-reopen'
requires that it is always present unless the BlockDriverState in
question doesn't have a current or default backing file.
This command allows reconfiguring the graph by using the appropriate
options to change the children of a node. At the moment it's possible
to change a backing file by setting the 'backing' option to the name
of the new node, but it should also be possible to add a similar
functionality to other block drivers (e.g. Quorum, blkverify).
Although the API is unlikely to change, this command is marked
experimental for the time being so there's room to see if the
semantics need changes.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Drop x- and x_ prefixes for latency histograms and update version to
4.0
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Commit a88b179f introduced the ability to set and query bitmap
persistence, but with an atypical spelling.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20190308205845.25734-1-eblake@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Remove is an inherently RW operation, so this will fail anyway, but
we can fail it very quickly instead of trying and failing, so do so.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190301191545.8728-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
drive and blockdev backup cannot use readonly bitmaps, because the
sync=incremental mechanism actually edits the bitmaps on success.
If you really want to do this operation, use a copied bitmap.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190301191545.8728-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Instead of checking against busy, inconsistent, or read only directly,
use a check function with permissions bits that let us streamline the
checks without reproducing them in many places.
Included in this patch are permissions changes that simply add the
inconsistent check to existing permissions call spots, without
addressing existing bugs.
In general, this means that busy+readonly checks become BDRV_BITMAP_DEFAULT,
which checks against all three conditions. busy-only checks become
BDRV_BITMAP_ALLOW_RO.
Notably, remove allows inconsistent bitmaps, so it doesn't follow the pattern.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190301191545.8728-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
