| Age | Commit message (Collapse) | Author |
|---|
|
The sum "cluster_index + count" may overflow uint32_t.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Message-ID: <20241106080521.219255-2-frolov@swemel.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Almost all functions that access bs->file already take the graph
lock now. Add locking to the remaining users and finally annotate the
struct field itself as protected by the graph lock.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-25-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Most implementations of .bdrv_open first open their file child (which is
an operation that internally takes the write lock and therefore we
shouldn't hold the graph lock while calling it), and afterwards many
operations that require holding the graph lock, e.g. for accessing
bs->file.
This changes block drivers that follow this pattern to take the graph
lock after opening the child node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-24-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds GRAPH_RDLOCK to some driver callbacks that are already called
with the graph lock held, and which will need the annotation because
they access bs->file, but don't have it yet.
This also covers a few callbacks that were not marked GRAPH_RDLOCK
before, but where updating BlockDriver is trivially possible.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-21-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Some blockdevs block migration because they do not support sharing across
hosts and/or do not support dirty bitmaps. These prohibitions do not apply
if the old and new qemu processes do not run concurrently, and if new qemu
starts on the same host as old, which is the case for cpr. Narrow the scope
of these blockers so they only apply to normal mode. They will not block
cpr modes when they are added in subsequent patches.
No functional change until a new mode is added.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1698263069-406971-4-git-send-email-steven.sistare@oracle.com>
|
|
Modify migrate_add_blocker and migrate_del_blocker to take an Error **
reason. This allows migration to own the Error object, so that if
an error occurs in migrate_add_blocker, migration code can free the Error
and clear the client handle, simplifying client code. It also simplifies
the migrate_del_blocker call site.
In addition, this is a pre-requisite for a proposed future patch that would
add a mode argument to migration requests to support live update, and
maintain a list of blockers for each mode. A blocker may apply to a single
mode or to multiple modes, and passing Error** will allow one Error object
to be registered for multiple modes.
No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Tested-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1697634216-84215-1-git-send-email-steven.sistare@oracle.com>
|
|
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_get_parent_name() need to hold a reader lock for the graph
because it accesses the parents list of a node.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-13-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The zero flag is missed in the Parallels format specification. We can
resort to discard if we have no backing file.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
|
|
* Discarding with backing stores is not supported by the format.
* There is no buffering/queueing of the discard operation.
* Only operations aligned to the cluster are supported.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
|
|
Replace 'space' representing the amount of data to preallocate with
'bytes'.
Rationale:
* 'space' at each place is converted to bytes
* the unit is more close to the variable name
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
|
|
The access to the bitmap is not optimized completely.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
|
|
We should extend the bitmap if the file is extended and set the bit in
the image used bitmap once the cluster is allocated. Sanity check at
that moment also looks like a good idea.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
|
|
This would be useful in the next patch in allocate_clusters(). This
change would not imply serious performance drawbacks as usually image
is full of data or are at the end of the bitmap.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
|
|
If the operation is failed, we need to check image consistency if the
problem is not about memory allocation.
Bitmap adjustments in allocate_cluster are not performed yet.
They worth to be separate. This was proven useful during debug of this
series. Kept as is for future bissecting.
It should be specifically noted that used bitmap must be recalculated
if data_off has been fixed during image consistency check.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
|
|
Once we have repaired data_off field in the header we should update
s->data_start which is calculated on the base of it.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
|
|
This functionality is used twice already and next patch will add more
code with it.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
|
|
More conditions follows thus the check should be more scalable.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
|
|
At the beginning of the function we can return immediately until we
really allocate s->header.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
|
|
We do not need to perform any deallocation/cleanup if wrong format is
detected.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
|
|
This patch creates above mentioned helper and moves its usage to the
beginning of parallels_open(). This simplifies parallels_open() a bit.
The patch also ensures that we store prealloc_size on block driver state
always in sectors. This makes code cleaner and avoids wrong opinion at
the assignment that the value is in bytes.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
|
|
We should free opts allocated through qemu_opts_create() at the end.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
|
|
Parallels driver indeed support Parallels Dirty Bitmap Feature in
read-only mode. The patch adds bdrv_supports_persistent_dirty_bitmap()
callback which always return 1 to indicate that.
This will allow to copy CBT from Parallels image with qemu-img.
Note: read-write support is signalled through
bdrv_co_can_store_new_dirty_bitmap() and is different.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
|
|
Old code is ugly and contains tabulations. There are no functional
changes in this patch.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
|
|
Place data_start/data_end calculation after reading the image header
to s->header. Set s->data_start to the offset calculated in
parallels_test_data_off(). Call bdrv_check() if data_off is incorrect.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
|
|
data_off field of the parallels image header can be corrupted. Check if
this field greater than the header + BAT size and less than file size.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
|
|
bdrv_co_getlength() should be used in coroutine context. Replace
bdrv_getlength() by bdrv_co_getlength() in parallels_check_outside_image().
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
|
|
Repair an image at opening if the image is unclean or out-of-image
corruption was detected.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
|
|
Cluster offsets must be unique among all the BAT entries. Find duplicate
offsets in the BAT and fix it by copying the content of the relevant
cluster to a newly allocated cluster and set the new cluster offset to the
duplicated entry.
Add host_cluster_index() helper to deduplicate the code.
When new clusters are allocated, the file size increases by 128 Mb. Call
parallels_check_leak() to fix this leak.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
|
|
In the next patch we will need the offset of the data area for host cluster
index calculation. Add this field and setting up code.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
|
|
In the on of the next patches we need to repair leaks without changing
leaks and leaks_fixed info in res. Also we don't want to print any warning
about leaks. Add "explicit" argument to skip info changing if the argument
is false.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
|
|
Initially data_end is set to the data_off image header field and must not
be greater than the file size.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
|
|
The BDRVParallelsState structure contains data_end field that is measured
in sectors. In parallels_open() initially this field is set by data_off
field from parallels image header.
According to the parallels format documentation, data_off field contains
an offset, in sectors, from the start of the file to the start of the
data area. For "WithoutFreeSpace" images: if data_off is zero, the offset
is calculated as the end of the BAT table plus some padding to ensure
sector size alignment.
The parallels_open() function has code for handling zero value in
data_off, but in the result data_end contains the offset in bytes.
Replace the alignment to sector size by division by sector size and fix
the comparision with s->header_size.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
|
|
This patch is technically necessary as git patch rendering could result
in moving some code from one place to the another and that hits
checkpatch.pl warning. This problem specifically happens within next
series.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
|
|
bdrv_co_getlength was recently introduced, with bdrv_getlength becoming
a wrapper for use in unknown context. Switch to bdrv_co_getlength when
possible.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-12-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
All the offsets in the BAT must be lower than the file size.
Fix the check condition for correct check.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20230424093147.197643-13-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
|
|
Replace the way we use mutex in parallels_co_check() for simplier
and less error prone code.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20230424093147.197643-12-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
|
|
We will add more and more checks so we need a better code structure
in parallels_co_check. Let each check performs in a separate loop
in a separate helper.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230424093147.197643-11-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
|
|
We will add more and more checks so we need a better code structure
in parallels_co_check. Let each check performs in a separate loop
in a separate helper.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Message-Id: <20230424093147.197643-10-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
|
|
Exclude out-of-image clusters from allocated and fragmented clusters
calculation.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Message-Id: <20230424093147.197643-9-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
|
|
We will add more and more checks so we need a better code structure in
parallels_co_check. Let each check performs in a separate loop in a
separate helper.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20230424093147.197643-8-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
|
|
We will add more and more checks so we need a better code structure
in parallels_co_check. Let each check performs in a separate loop
in a separate helper.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230424093147.197643-7-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
|
|
BAT is written in the context of conventional operations over the image
inside bdrv_co_flush() when it calls parallels_co_flush_to_os() callback.
Thus we should not modify BAT array directly, but call
parallels_set_bat_entry() helper and bdrv_co_flush() further on. After
that there is no need to manually write BAT and track its modification.
This makes code more generic and allows to split parallels_set_bat_entry()
for independent pieces.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20230424093147.197643-6-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
|
|
This helper will be reused in next patches during parallels_co_check
rework to simplify its code.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230424093147.197643-5-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
|
|
Set data_end to the end of the last cluster inside the image. In such a
way we can be sure that corrupted offsets in the BAT can't affect on the
image size. If there are no allocated clusters set image_end_offset by
data_end.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20230424093147.197643-4-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
|
|
Don't let high_off be more than the file size even if we don't fix the
image.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230424093147.197643-3-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
|
|
data_end field in BDRVParallelsState is set to the biggest offset present
in BAT. If this offset is outside of the image, any further write will
create the cluster at this offset and/or the image will be truncated to
this offset on close. This is definitely not correct.
Raise an error in parallels_open() if data_end points outside the image
and it is not a check (let the check to repaire the image). Set data_end
to the end of the cluster with the last correct offset.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Message-Id: <20230424093147.197643-2-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
|
|
These are functions that modify the graph, so they must be able to take
a writer lock. This is impossible if they already hold the reader lock.
If they need a reader lock for some of their operations, they should
take it internally.
Many of them go through blk_*(), which will always take the lock itself.
Direct calls of bdrv_*() need to take the reader lock. Note that while
locking for bdrv_co_*() calls is checked by TSA, this is not the case
for the mixed_coroutine_fns bdrv_*(). Holding the lock is still required
when they are called from coroutine context like here!
This effectively reverts 4ec8df0183, but adds some internal locking
instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
These functions must not be called in coroutine context, because they
need write access to the graph.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_create() need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-17-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pread*/pwrite*() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-12-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
