aboutsummaryrefslogtreecommitdiff
path: root/block/nfs.c
AgeCommit message (Collapse)Author
2024-06-28block: remove separate bdrv_file_open callbackPaolo Bonzini
bdrv_file_open and bdrv_open are completely equivalent, they are never checked except to see which one to invoke. So merge them into a single one. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-05-14block/nfs: Use URI parsing code from glibThomas Huth
Since version 2.66, glib has useful URI parsing functions, too. Use those instead of the QEMU-internal ones to be finally able to get rid of the latter. While we're at it, slightly rephrase one of the error messages: Use "Invalid value..." instead of "Illegal value..." since the latter rather sounds like the users were breaking a law here. Reviewed-by: Eric Blake <eblake@redhat.com> Message-ID: <20240418101056.302103-12-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-10-12block: Mark bdrv_refresh_filename() and callers GRAPH_RDLOCKKevin Wolf
This adds GRAPH_RDLOCK annotations to declare that callers of bdrv_refresh_filename() need to hold a reader lock for the graph because it accesses the children list of a node. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20230929145157.45443-11-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-06-02cutils: Adjust signature of parse_uint[_full]Eric Blake
It's already confusing that we have two very similar functions for wrapping the parse of a 64-bit unsigned value, differing mainly on whether they permit leading '-'. Adjust the signature of parse_uint() and parse_uint_full() to be like all of qemu_strto*(): put the result parameter last, use the same types (uint64_t and unsigned long long have the same width, but are not always the same type), and mark endptr const (this latter change only affects the rare caller of parse_uint). Adjust all callers in the tree. While at it, note that since cutils.c already includes: QEMU_BUILD_BUG_ON(sizeof(int64_t) != sizeof(long long)); we are guaranteed that the result of parse_uint* cannot exceed UINT64_MAX (or the build would have failed), so we can drop pre-existing dead comparisons in opts-visitor.c that were never false. Reviewed-by: Hanna Czenczek <hreitz@redhat.com> Message-Id: <20230522190441.64278-8-eblake@redhat.com> [eblake: Drop dead code spotted by Markus] Signed-off-by: Eric Blake <eblake@redhat.com>
2023-05-30aio: remove aio_disable_external() APIStefan Hajnoczi
All callers now pass is_external=false to aio_set_fd_handler() and aio_set_event_notifier(). The aio_disable_external() API that temporarily disables fd handlers that were registered is_external=true is therefore dead code. Remove aio_disable_external(), aio_enable_external(), and the is_external arguments to aio_set_fd_handler() and aio_set_event_notifier(). The entire test-fdmon-epoll test is removed because its sole purpose was testing aio_disable_external(). Parts of this patch were generated using the following coccinelle (https://coccinelle.lip6.fr/) semantic patch: @@ expression ctx, fd, is_external, io_read, io_write, io_poll, io_poll_ready, opaque; @@ - aio_set_fd_handler(ctx, fd, is_external, io_read, io_write, io_poll, io_poll_ready, opaque) + aio_set_fd_handler(ctx, fd, io_read, io_write, io_poll, io_poll_ready, opaque) @@ expression ctx, notifier, is_external, io_read, io_poll, io_poll_ready; @@ - aio_set_event_notifier(ctx, notifier, is_external, io_read, io_poll, io_poll_ready) + aio_set_event_notifier(ctx, notifier, io_read, io_poll, io_poll_ready) Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20230516190238.8401-21-stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-04-12block/nfs: do not poll within a coroutinePaolo Bonzini
Since the former nfs_get_allocated_file_size is now a coroutine function, it must suspend rather than poll. Switch BDRV_POLL_WHILE() to a qemu_coroutine_yield() loop and schedule nfs_co_generic_bh_cb() in place of the call to bdrv_wakeup(). Fixes: 82618d7bc341 ("block: Convert bdrv_get_allocated_file_size() to co_wrapper", 2023-02-01) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20230412112606.80983-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-02-01block: Convert bdrv_get_allocated_file_size() to co_wrapperEmanuele Giuseppe Esposito
bdrv_get_allocated_file_size() is categorized as an I/O function, and it currently doesn't run in a coroutine. We should let it take a graph rdlock since it traverses the block nodes graph, which however is only possible in a coroutine. Therefore turn it into a co_wrapper to move the actual function into a coroutine where the lock can be taken. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20230113204212.359076-10-kwolf@redhat.com> Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-01-20include/block: Untangle inclusion loopsMarkus Armbruster
We have two inclusion loops: block/block.h -> block/block-global-state.h -> block/block-common.h -> block/blockjob.h -> block/block.h block/block.h -> block/block-io.h -> block/block-common.h -> block/blockjob.h -> block/block.h I believe these go back to Emanuele's reorganization of the block API, merged a few months ago in commit d7e2fe4aac8. Fortunately, breaking them is merely a matter of deleting unnecessary includes from headers, and adding them back in places where they are now missing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20221221133551.3967339-2-armbru@redhat.com>
2022-10-27block/nfs: Fix 32-bit Windows buildBin Meng
libnfs.h declares nfs_fstat() as the following for win32: int nfs_fstat(struct nfs_context *nfs, struct nfsfh *nfsfh, struct __stat64 *st); The 'st' parameter should be of type 'struct __stat64'. The codes happen to build successfully for 64-bit Windows, but it does not build for 32-bit Windows. Fixes: 6542aa9c75bc ("block: add native support for NFS") Fixes: 18a8056e0bc7 ("block/nfs: cache allocated filesize for read-only files") Signed-off-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20220908132817.1831008-6-bmeng.cn@gmail.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-10-07nfs: add missing coroutine_fn annotationsPaolo Bonzini
Callers of coroutine_fn must be coroutine_fn themselves, or the call must be within "if (qemu_in_coroutine())". Apply coroutine_fn to functions where this holds. Reviewed-by: Alberto Faria <afaria@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220922084924.201610-12-pbonzini@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-01-12aio-posix: split poll check from ready handlerStefan Hajnoczi
Adaptive polling measures the execution time of the polling check plus handlers called when a polled event becomes ready. Handlers can take a significant amount of time, making it look like polling was running for a long time when in fact the event handler was running for a long time. For example, on Linux the io_submit(2) syscall invoked when a virtio-blk device's virtqueue becomes ready can take 10s of microseconds. This can exceed the default polling interval (32 microseconds) and cause adaptive polling to stop polling. By excluding the handler's execution time from the polling check we make the adaptive polling calculation more accurate. As a result, the event loop now stays in polling mode where previously it would have fallen back to file descriptor monitoring. The following data was collected with virtio-blk num-queues=2 event_idx=off using an IOThread. Before: 168k IOPS, IOThread syscalls: 9837.115 ( 0.020 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 16, iocbpp: 0x7fcb9f937db0) = 16 9837.158 ( 0.002 ms): IO iothread1/620155 write(fd: 103, buf: 0x556a2ef71b88, count: 8) = 8 9837.161 ( 0.001 ms): IO iothread1/620155 write(fd: 104, buf: 0x556a2ef71b88, count: 8) = 8 9837.163 ( 0.001 ms): IO iothread1/620155 ppoll(ufds: 0x7fcb90002800, nfds: 4, tsp: 0x7fcb9f1342d0, sigsetsize: 8) = 3 9837.164 ( 0.001 ms): IO iothread1/620155 read(fd: 107, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.174 ( 0.001 ms): IO iothread1/620155 read(fd: 105, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.176 ( 0.001 ms): IO iothread1/620155 read(fd: 106, buf: 0x7fcb9f939cc0, count: 512) = 8 9837.209 ( 0.035 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 32, iocbpp: 0x7fca7d0cebe0) = 32 174k IOPS (+3.6%), IOThread syscalls: 9809.566 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0cdd62be0) = 32 9809.625 ( 0.001 ms): IO iothread1/623061 write(fd: 103, buf: 0x5647cfba5f58, count: 8) = 8 9809.627 ( 0.002 ms): IO iothread1/623061 write(fd: 104, buf: 0x5647cfba5f58, count: 8) = 8 9809.663 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0d0388b50) = 32 Notice that ppoll(2) and eventfd read(2) syscalls are eliminated because the IOThread stays in polling mode instead of falling back to file descriptor monitoring. As usual, polling is not implemented on Windows so this patch ignores the new io_poll_read() callback in aio-win32.c. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20211207132336.36627-2-stefanha@redhat.com [Fixed up aio_set_event_notifier() calls in tests/unit/test-fdmon-epoll.c added after this series was queued. --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-09-29block: use int64_t instead of uint64_t in driver write handlersVladimir Sementsov-Ogievskiy
We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver write handlers parameters which are already 64bit to signed type. While being here, convert also flags parameter to be BdrvRequestFlags. Now let's consider all callers. Simple git grep '\->bdrv_\(aio\|co\)_pwritev\(_part\)\?' shows that's there three callers of driver function: bdrv_driver_pwritev() and bdrv_driver_pwritev_compressed() in block/io.c, both pass int64_t, checked by bdrv_check_qiov_request() to be non-negative. qcow2_save_vmstate() does bdrv_check_qiov_request(). Still, the functions may be called directly, not only by drv->... Let's check: git grep '\.bdrv_\(aio\|co\)_pwritev\(_part\)\?\s*=' | \ awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \ while read func; do git grep "$func(" | \ grep -v "$func(BlockDriverState"; done shows several callers: qcow2: qcow2_co_truncate() write at most up to @offset, which is checked in generic qcow2_co_truncate() by bdrv_check_request(). qcow2_co_pwritev_compressed_task() pass the request (or part of the request) that already went through normal write path, so it should be OK qcow: qcow_co_pwritev_compressed() pass int64_t, it's updated by this patch quorum: quorum_co_pwrite_zeroes() pass int64_t and int - OK throttle: throttle_co_pwritev_compressed() pass int64_t, it's updated by this patch vmdk: vmdk_co_pwritev_compressed() pass int64_t, it's updated by this patch Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-5-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-29block: use int64_t instead of uint64_t in driver read handlersVladimir Sementsov-Ogievskiy
We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver read handlers parameters which are already 64bit to signed type. While being here, convert also flags parameter to be BdrvRequestFlags. Now let's consider all callers. Simple git grep '\->bdrv_\(aio\|co\)_preadv\(_part\)\?' shows that's there three callers of driver function: bdrv_driver_preadv() in block/io.c, passes int64_t, checked by bdrv_check_qiov_request() to be non-negative. qcow2_load_vmstate() does bdrv_check_qiov_request(). do_perform_cow_read() has uint64_t argument. And a lot of things in qcow2 driver are uint64_t, so converting it is big job. But we must not work with requests that don't satisfy bdrv_check_qiov_request(), so let's just assert it here. Still, the functions may be called directly, not only by drv->... Let's check: git grep '\.bdrv_\(aio\|co\)_preadv\(_part\)\?\s*=' | \ awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \ while read func; do git grep "$func(" | \ grep -v "$func(BlockDriverState"; done The only one such caller: QEMUIOVector qiov = QEMU_IOVEC_INIT_BUF(qiov, &data, 1); ... ret = bdrv_replace_test_co_preadv(bs, 0, 1, &qiov, 0); in tests/unit/test-bdrv-drain.c, and it's OK obviously. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: fix typos] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-07-09util/uri: do not check argument of uri_free()Heinrich Schuchardt
uri_free() checks if its argument is NULL in uri_clean() and g_free(). There is no need to check the argument before the call. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Message-Id: <20210629063602.4239-1-xypron.glpk@gmx.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-05-02Do not include sysemu/sysemu.h if it's not really necessaryThomas Huth
Stop including sysemu/sysemu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-2-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-12-18block/nfs: fix int overflow in nfs_client_open_qdictPeter Lieven
nfs_client_open returns the file size in sectors. This effectively makes it impossible to open files larger than 1TB. Fixes: c22a03454544c2a08f1107c5cc8481a5574533d5 Cc: qemu-stable@nongnu.org Signed-off-by: Peter Lieven <pl@kamp.de> Message-Id: <20201209121735.16437-1-pl@kamp.de> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-11-09block: Fixes nfs compiling error on msys2/mingwYonggang Luo
These compiling errors are fixed: ../block/nfs.c:27:10: fatal error: poll.h: No such file or directory 27 | #include <poll.h> | ^~~~~~~~ compilation terminated. ../block/nfs.c:63:5: error: unknown type name 'blkcnt_t' 63 | blkcnt_t st_blocks; | ^~~~~~~~ ../block/nfs.c: In function 'nfs_client_open': ../block/nfs.c:550:27: error: 'struct _stat64' has no member named 'st_blocks' 550 | client->st_blocks = st.st_blocks; | ^ ../block/nfs.c: In function 'nfs_get_allocated_file_size': ../block/nfs.c:751:41: error: 'struct _stat64' has no member named 'st_blocks' 751 | return (task.ret < 0 ? task.ret : st.st_blocks * 512); | ^ ../block/nfs.c: In function 'nfs_reopen_prepare': ../block/nfs.c:805:31: error: 'struct _stat64' has no member named 'st_blocks' 805 | client->st_blocks = st.st_blocks; | ^ ../block/nfs.c: In function 'nfs_get_allocated_file_size': ../block/nfs.c:752:1: error: control reaches end of non-void function [-Werror=return-type] 752 | } | ^ On msys2/mingw, there is no st_blocks in struct _stat64 yet, we disable the usage of it on msys2/mingw, and create a typedef long long blkcnt_t; for further implementation Signed-off-by: Yonggang Luo <luoyonggang@gmail.com> Message-Id: <20201105123116.674-2-luoyonggang@gmail.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-09-23qemu/atomic.h: rename atomic_ to qatomic_Stefan Hajnoczi
clang's C11 atomic_fetch_*() functions only take a C11 atomic type pointer argument. QEMU uses direct types (int, etc) and this causes a compiler error when a QEMU code calls these functions in a source file that also included <stdatomic.h> via a system header file: $ CC=clang CXX=clang++ ./configure ... && make ../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid) Avoid using atomic_*() names in QEMU's atomic.h since that namespace is used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h and <stdatomic.h> can co-exist. I checked /usr/include on my machine and searched GitHub for existing "qatomic_" users but there seem to be none. This patch was generated using: $ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \ sort -u >/tmp/changed_identifiers $ for identifier in $(</tmp/changed_identifiers); do sed -i "s%\<$identifier\>%q$identifier%g" \ $(git grep -I -l "\<$identifier\>") done I manually fixed line-wrap issues and misaligned rST tables. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
2020-07-10qapi: Smooth another visitor error checking patternMarkus Armbruster
Convert visit_type_FOO(v, ..., &ptr, &err); ... if (err) { ... } to visit_type_FOO(v, ..., &ptr, errp); ... if (!ptr) { ... } for functions that set @ptr to non-null / null on success / error. Eliminate error_propagate() that are now unnecessary. Delete @err that are now unused. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-40-armbru@redhat.com>
2020-05-08block: Drop unused .bdrv_has_zero_init_truncateEric Blake
Now that there are no clients of bdrv_has_zero_init_truncate, none of the drivers need to worry about providing it. What's more, this eliminates a source of some confusion: a literal reading of the documentation as written in ceaca56f and implemented in commit 1dcaf527 claims that a driver which returns 0 for bdrv_has_zero_init_truncate() must not return 1 for bdrv_has_zero_init(); this condition was violated for parallels, qcow, and sometimes for vdi, although in practice it did not matter since those drivers also lacked .bdrv_co_truncate. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200428202905.770727-10-eblake@redhat.com> Acked-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-08nfs: Support BDRV_REQ_ZERO_WRITE for truncateEric Blake
Our .bdrv_has_zero_init_truncate returns 1 if we detect that the OS always 0-fills; we can use that same knowledge to implement BDRV_REQ_ZERO_WRITE by ignoring it when the OS gives it to us for free. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200428202905.770727-4-eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-05Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-5.1-pull-request' into staging trivial patches (20200504) Silent static analyzer warning Remove dead assignments Support -chardev serial on macOS Update MAINTAINERS Some cosmetic changes # gpg: Signature made Mon 04 May 2020 16:45:18 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.1-pull-request: hw/timer/pxa2xx_timer: Add assertion to silent static analyzer warning hw/timer/stm32f2xx_timer: Remove dead assignment hw/gpio/aspeed_gpio: Remove dead assignment hw/isa/i82378: Remove dead assignment hw/ide/sii3112: Remove dead assignment hw/input/adb-kbd: Remove dead assignment hw/i2c/pm_smbus: Remove dead assignment blockdev: Remove dead assignment block: Avoid dead assignment Compress lines for immediate return chardev: Add macOS to list of OSes that support -chardev serial MAINTAINERS: Update Keith Busch's email address elf_ops: Don't try to g_mapped_file_unref(NULL) hw/mem/pc-dimm: Fix line over 80 characters warning hw/mem/pc-dimm: Print slot number on error at pc_dimm_pre_plug() MAINTAINERS: Mark the LatticeMico32 target as orphan timer/exynos4210_mct: Remove redundant statement in exynos4210_mct_write() display/blizzard: use extract16() for fix clang analyzer warning in blizzard_draw_line16_32() scsi/esp-pci: add g_assert() for fix clang analyzer warning in esp_pci_io_write() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-04lockable: replaced locks with lock guard macros where appropriateDaniel Brodsky
- ran regexp "qemu_mutex_lock\(.*\).*\n.*if" to find targets - replaced result with QEMU_LOCK_GUARD if all unlocks at function end - replaced result with WITH_QEMU_LOCK_GUARD if unlock not at end Signed-off-by: Daniel Brodsky <dnbrdsky@gmail.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-id: 20200404042108.389635-3-dnbrdsky@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-05-04Compress lines for immediate returnSimran Singhal
Compress two lines into a single line if immediate return statement is found. It also remove variables progress, val, data, ret and sock as they are no longer needed. Remove space between function "mixer_load" and '(' to fix the checkpatch.pl error:- ERROR: space prohibited between function name and open parenthesis '(' Done using following coccinelle script: @@ local idexpression ret; expression e; @@ -ret = +return e; -return ret; Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200401165314.GA3213@simran-Inspiron-5558> [lv: in handle_aiocb_write_zeroes_unmap() move "int ret" inside the #ifdef] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-04-30block: Add flags to BlockDriver.bdrv_co_truncate()Kevin Wolf
This adds a new BdrvRequestFlags parameter to the .bdrv_co_truncate() driver callbacks, and a supported_truncate_flags field in BlockDriverState that allows drivers to advertise support for request flags in the context of truncate. For now, we always pass 0 and no drivers declare support for any flag. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200424125448.63318-2-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-26block: pass BlockDriver reference to the .bdrv_co_createMaxim Levitsky
This will allow the reuse of a single generic .bdrv_co_create implementation for several drivers. No functional changes. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200326011218.29230-2-mlevitsk@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28block: Add @exact parameter to bdrv_co_truncate()Max Reitz
We have two drivers (iscsi and file-posix) that (in some cases) return success from their .bdrv_co_truncate() implementation if the block device is larger than the requested offset, but cannot be shrunk. Some callers do not want that behavior, so this patch adds a new parameter that they can use to turn off that behavior. This patch just adds the parameter and lets the block/io.c and block/block-backend.c functions pass it around. All other callers always pass false and none of the implementations evaluate it, so that this patch does not change existing behavior. Future patches take care of that. Suggested-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190918095144.955-5-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-14replay: add BH oneshot event for block layerPavel Dovgalyuk
Replay is capable of recording normal BH events, but sometimes there are single use callbacks scheduled with aio_bh_schedule_oneshot function. This patch enables recording and replaying such callbacks. Block layer uses these events for calling the completion function. Replaying these calls makes the execution deterministic. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-09-13block/nfs: add support for nfs_umountPeter Lieven
libnfs recently added support for unmounting. Add support in Qemu too. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-09-13block/nfs: tear down aio before nfs_closePeter Lieven
nfs_close is a sync call from libnfs and has its own event handler polling on the nfs FD. Avoid that both QEMU and libnfs are intefering here. CC: qemu-stable@nongnu.org Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-08-19block: Implement .bdrv_has_zero_init_truncate()Max Reitz
We need to implement .bdrv_has_zero_init_truncate() for every block driver that supports truncation and has a .bdrv_has_zero_init() implementation. Implement it the same way each driver implements .bdrv_has_zero_init(). This is at least not any more unsafe than what we had before. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190724171239.8764-5-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-08-16Clean up inclusion of sysemu/sysemu.hMarkus Armbruster
In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Almost a third of its inclusions are actually superfluous. Delete them. Downgrade two more to qapi/qapi-types-run-state.h, and move one from char/serial.h to char/serial.c. hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and stubs/semihost.c define variables declared in sysemu/sysemu.h without including it. The compiler is cool with that, but include it anyway. This doesn't reduce actual use much, as it's still included into widely included headers. The next commit will tackle that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-27-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16Include qemu/main-loop.h lessMarkus Armbruster
In my "build everything" tree, changing qemu/main-loop.h triggers a recompile of some 5600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). It includes block/aio.h, which in turn includes qemu/event_notifier.h, qemu/notify.h, qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h, qemu/thread.h, qemu/timer.h, and a few more. Include qemu/main-loop.h only where it's needed. Touching it now recompiles only some 1700 objects. For block/aio.h and qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the others, they shrink only slightly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-21-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-02-25block: Purify .bdrv_refresh_filename()Max Reitz
Currently, BlockDriver.bdrv_refresh_filename() is supposed to both refresh the filename (BDS.exact_filename) and set BDS.full_open_options. Now that we have generic code in the central bdrv_refresh_filename() for creating BDS.full_open_options, we can drop the latter part from all BlockDriver.bdrv_refresh_filename() implementations. This also means that we can drop all of the existing default code for this from the global bdrv_refresh_filename() itself. Furthermore, we now have to call BlockDriver.bdrv_refresh_filename() after having set BDS.full_open_options, because the block driver's implementation should now be allowed to depend on BDS.full_open_options being set correctly. Finally, with this patch we can drop the @options parameter from BlockDriver.bdrv_refresh_filename(); also, add a comment on this function's purpose in block/block_int.h while touching its interface. This completely obsoletes blklogwrite's implementation of .bdrv_refresh_filename(). Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190201192935.18394-25-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-25block: Add strong_runtime_opts to BlockDriverMax Reitz
This new field can be set by block drivers to list the runtime options they accept that may influence the contents of the respective BDS. As of a follow-up patch, this list will be used by the common bdrv_refresh_filename() implementation to decide which options to put into BDS.full_open_options (and consequently whether a JSON filename has to be created), thus freeing the drivers of having to implement that logic themselves. Additionally, this patch adds the field to all of the block drivers that need it and sets it accordingly. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 20190201192935.18394-22-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-25block/nfs: Implement bdrv_dirname()Max Reitz
While the basic idea is obvious and could be handled by the default bdrv_dirname() implementation, we cannot generate a directory name if the gid or uid are set, so we have to explicitly return NULL in those cases. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 20190201192935.18394-19-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-29block: Convert .bdrv_truncate callback to coroutine_fnKevin Wolf
bdrv_truncate() is an operation that can block (even for a quite long time, depending on the PreallocMode) in I/O paths that shouldn't block. Convert it to a coroutine_fn so that we have the infrastructure for drivers to make their .bdrv_co_truncate implementation asynchronous. This change could potentially introduce new race conditions because bdrv_truncate() isn't necessarily executed atomically any more. Whether this is a problem needs to be evaluated for each block driver that supports truncate: * file-posix/win32, gluster, iscsi, nfs, rbd, ssh, sheepdog: The protocol drivers are trivially safe because they don't actually yield yet, so there is no change in behaviour. * copy-on-read, crypto, raw-format: Essentially just filter drivers that pass the request to a child node, no problem. * qcow2: The implementation modifies metadata, so it needs to hold s->lock to be safe with concurrent I/O requests. In order to avoid double locking, this requires pulling the locking out into preallocate_co() and using qcow2_write_caches() instead of bdrv_flush(). * qed: Does a single header update, this is fine without locking. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-15block: Factor out qobject_input_visitor_new_flat_confused()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15block: Fix -blockdev for certain non-string scalarsMarkus Armbruster
Configuration flows through the block subsystem in a rather peculiar way. Configuration made with -drive enters it as QemuOpts. Configuration made with -blockdev / blockdev-add enters it as QAPI type BlockdevOptions. The block subsystem uses QDict, QemuOpts and QAPI types internally. The precise flow is next to impossible to explain (I tried for this commit message, but gave up after wasting several hours). What I can explain is a flaw in the BlockDriver interface that leads to this bug: $ qemu-system-x86_64 -blockdev node-name=n1,driver=nfs,server.type=inet,server.host=localhost,path=/foo/bar,user=1234 qemu-system-x86_64: -blockdev node-name=n1,driver=nfs,server.type=inet,server.host=localhost,path=/foo/bar,user=1234: Internal error: parameter user invalid QMP blockdev-add is broken the same way. Here's what happens. The block layer passes configuration represented as flat QDict (with dotted keys) to BlockDriver methods .bdrv_file_open(). The QDict's members are typed according to the QAPI schema. nfs_file_open() converts it to QAPI type BlockdevOptionsNfs, with qdict_crumple() and a qobject input visitor. This visitor comes in two flavors. The plain flavor requires scalars to be typed according to the QAPI schema. That's the case here. The keyval flavor requires string scalars. That's not the case here. nfs_file_open() uses the latter, and promptly falls apart for members @user, @group, @tcp-syn-count, @readahead-size, @page-cache-size, @debug. Switching to the plain flavor would fix -blockdev, but break -drive, because there the scalars arrive in nfs_file_open() as strings. The proper fix would be to replace the QDict by QAPI type BlockdevOptions in the BlockDriver interface. Sadly, that's beyond my reach right now. Next best would be to fix the block layer to always pass correctly typed QDicts to the BlockDriver methods. Also beyond my reach. What I can do is throw another hack onto the pile: have nfs_file_open() convert all members to string, so use of the keyval flavor actually works, by replacing qdict_crumple() by new function qdict_crumple_for_keyval_qiv(). The pattern "pass result of qdict_crumple() to qobject_input_visitor_new_keyval()" occurs several times more: * qemu_rbd_open() Same issue as nfs_file_open(), but since BlockdevOptionsRbd has only string members, its only a latent bug. Fix it anyway. * parallels_co_create_opts(), qcow_co_create_opts(), qcow2_co_create_opts(), bdrv_qed_co_create_opts(), sd_co_create_opts(), vhdx_co_create_opts(), vpc_co_create_opts() These work, because they create the QDict with qemu_opts_to_qdict_filtered(), which creates only string scalars. The function sports a TODO comment asking for better typing; that's going to be fun. Use qdict_crumple_for_keyval_qiv() to be safe. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15block: Add block-specific QDict headerMax Reitz
There are numerous QDict functions that have been introduced for and are used only by the block layer. Move their declarations into an own header file to reflect that. While qdict_extract_subqdict() is in fact used outside of the block layer (in util/qemu-config.c), it is still a function related very closely to how the block layer works with nested QDicts, namely by sometimes flattening them. Therefore, its declaration is put into this header as well and util/qemu-config.c includes it with a comment stating exactly which function it needs. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20180509165530.29561-7-mreitz@redhat.com> [Copyright note tweaked, superfluous includes dropped] Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-05-16nfs: Remove processed options from QDictKevin Wolf
Commit c22a03454 QAPIfied option parsing in the NFS block driver, but forgot to remove all the options we processed. Therefore, we get an error in bdrv_open_inherit(), which thinks the remaining options are invalid. Trying to open an NFS image will result in an error like this: Block protocol 'nfs' doesn't support the option 'server.host' Remove all options from the QDict to make the NFS driver work again. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-id: 20180516160816.26259-1-kwolf@redhat.com Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2018-05-16nfs: Fix error path in nfs_options_qdict_to_qapi()Kevin Wolf
Don't throw away local_err, but propagate it to errp. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-id: 20180516161034.27440-1-kwolf@redhat.com Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2018-05-04qobject: Replace qobject_incref/QINCREF qobject_decref/QDECREFMarc-André Lureau
Now that we can safely call QOBJECT() on QObject * as well as its subtypes, we can have macros qobject_ref() / qobject_unref() that work everywhere instead of having to use QINCREF() / QDECREF() for QObject and qobject_incref() / qobject_decref() for its subtypes. The replacement is mechanical, except I broke a long line, and added a cast in monitor_qmp_cleanup_req_queue_locked(). Unlike qobject_decref(), qobject_unref() doesn't accept void *. Note that the new macros evaluate their argument exactly once, thus no need to shout them. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Rebased, semantic conflict resolved, commit message improved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-03-09nfs: Support .bdrv_co_createKevin Wolf
This adds the .bdrv_co_create driver callback to nfs, which enables image creation over QMP. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-03-09nfs: Use QAPI options in nfs_client_open()Kevin Wolf
Using the QAPI visitor to turn all options into QAPI BlockdevOptionsNfs simplifies the code a lot. It will also be useful for implementing the QAPI based .bdrv_co_create callback. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-03-09block: convert bdrv_invalidate_cache callback to coroutine_fnPaolo Bonzini
QED's bdrv_invalidate_cache implementation would like to reuse functions that acquire/release the metadata locks. Call it from coroutine context to simplify the logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1516279431-30424-6-git-send-email-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-06Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches # gpg: Signature made Mon 05 Mar 2018 17:45:51 GMT # gpg: using RSA key 7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (38 commits) block: Fix NULL dereference on empty drive error qcow2: Replace align_offset() with ROUND_UP() block/ssh: Add basic .bdrv_truncate() block/ssh: Make ssh_grow_file() blocking block/ssh: Pull ssh_grow_file() from ssh_create() qemu-img: Make resize error message more general qcow2: make qcow2_co_create2() a coroutine_fn block: rename .bdrv_create() to .bdrv_co_create_opts() Revert "IDE: Do not flush empty CDROM drives" block: test blk_aio_flush() with blk->root == NULL block: add BlockBackend->in_flight counter block: extract AIO_WAIT_WHILE() from BlockDriverState aio: rename aio_context_in_iothread() to in_aio_context_home_thread() docs: document how to use the l2-cache-entry-size parameter specs/qcow2: Fix documentation of the compressed cluster descriptor iotest 033: add misaligned write-zeroes test via truncate block: fix write with zero flag set and iovector provided block: Drop unused .bdrv_co_get_block_status() vvfat: Switch to .bdrv_co_block_status() vpc: Switch to .bdrv_co_block_status() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # include/block/block.h
2018-03-02Include less of the generated modular QAPI headersMarkus Armbruster
In my "build everything" tree, a change to the types in qapi-schema.json triggers a recompile of about 4800 out of 5100 objects. The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h, qapi-types.h. Each of these headers still includes all its shards. Reduce compile time by including just the shards we actually need. To illustrate the benefits: adding a type to qapi/migration.json now recompiles some 2300 instead of 4800 objects. The next commit will improve it further. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-24-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02block: rename .bdrv_create() to .bdrv_co_create_opts()Stefan Hajnoczi
BlockDriver->bdrv_create() has been called from coroutine context since commit 5b7e1542cfa41a281af9629d31cef03704d976e6 ("block: make bdrv_create adopt coroutine"). Make this explicit by renaming to .bdrv_co_create_opts() and add the coroutine_fn annotation. This makes it obvious to block driver authors that they may yield, use CoMutex, or other coroutine_fn APIs. bdrv_co_create is reserved for the QAPI-based version that Kevin is working on. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20170705102231.20711-2-stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-14 22:01:50 +0000