aboutsummaryrefslogtreecommitdiff
path: root/block/blkdebug.c
AgeCommit message (Collapse)Author
2017-07-11block: Add PreallocMode to bdrv_truncate()Max Reitz
For block drivers that just pass a truncate request to the underlying protocol, we can now pass the preallocation mode instead of aborting if it is not PREALLOC_MODE_OFF. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20170613202107.10125-3-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11block: Add PreallocMode to BD.bdrv_truncate()Max Reitz
Add a PreallocMode parameter to the bdrv_truncate() function implemented by each block driver. Currently, we always pass PREALLOC_MODE_OFF and no driver accepts anything else. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20170613202107.10125-2-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-10blkdebug: Support .bdrv_co_get_block_statusEric Blake
Without a passthrough status of BDRV_BLOCK_RAW, anything wrapped by blkdebug appears 100% allocated as data. Better is treating it the same as the underlying file being wrapped. Update iotest 177 for the new expected output. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-06-26blkdebug: Catch bs->exact_filename overflowMax Reitz
The bs->exact_filename field may not be sufficient to store the full blkdebug node filename. In this case, we should not generate a filename at all instead of an unusable one. Cc: qemu-stable@nongnu.org Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20170613172006.19685-2-mreitz@redhat.com Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-06-26block: change variable names in BlockDriverStateManos Pitsidianakis
Change the 'int count' parameter in *pwrite_zeros, *pdiscard related functions (and some others) to 'int bytes', as they both refer to bytes. This helps with code legibility. Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr> Message-id: 20170609101808.13506-1-el13635@mail.ntua.gr Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-06-20qapi: merge QInt and QFloat in QNumMarc-André Lureau
We would like to use a same QObject type to represent numbers, whether they are int, uint, or floats. Getters will allow some compatibility between the various types if the number fits other representations. Add a few more tests while at it. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [parse_stats_intervals() simplified a bit, comment in test_visitor_in_int_overflow() tidied up, suppress bogus warnings] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-11blkdebug: Add ability to override unmap geometriesEric Blake
Make it easier to simulate various unusual hardware setups (for example, recent commits 3482b9b and b8d0a98 affect the Dell Equallogic iSCSI with its 15M preferred and maximum unmap and write zero sizing, or b2f95fe deals with the Linux loopback block device having a max_transfer of 64k), by allowing blkdebug to wrap any other device with further restrictions on various alignments. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20170429191419.30051-9-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-05-11blkdebug: Simplify override logicEric Blake
Rather than store into a local variable, then copy to the struct if the value is valid, then reporting errors otherwise, it is simpler to just store into the struct and report errors if the value is invalid. This however requires that the struct store a 64-bit number, rather than a narrower type. Likewise, setting a sane errno value in ret prior to the sequence of parsing and jumping to out: on error makes it easier for the next patch to add a chain of similar checks. Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 20170429191419.30051-8-eblake@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-05-11blkdebug: Add pass-through write_zero and discard supportEric Blake
In order to test the effects of artificial geometry constraints on operations like write zero or discard, we first need blkdebug to manage these actions. It also allows us to inject errors on those operations, just like we can for read/write/flush. We can also test the contract promised by the block layer; namely, if a device has specified limits on alignment or maximum size, then those limits must be obeyed (for now, the blkdebug driver merely inherits limits from whatever it is wrapping, but the next patch will further enhance it to allow specific limit overrides). This patch intentionally refuses to service requests smaller than the requested alignments; this is because an upcoming patch adds a qemu-iotest to prove that the block layer is correctly handling fragmentation, but the test only works if there is a way to tell the difference at artificial alignment boundaries when blkdebug is using a larger-than-default alignment. If we let the blkdebug layer always defer to the underlying layer, which potentially has a smaller granularity, the iotest will be thwarted. Tested by setting up an NBD server with export 'foo', then invoking: $ ./qemu-io qemu-io> open -o driver=blkdebug blkdebug::nbd://localhost:10809/foo qemu-io> d 0 15M qemu-io> w -z 0 15M Pre-patch, the server never sees the discard (it was silently eaten by the block layer); post-patch it is passed across the wire. Likewise, pre-patch the write is always passed with NBD_WRITE (with 15M of zeroes on the wire), while post-patch it can utilize NBD_WRITE_ZEROES (for less traffic). Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20170429191419.30051-7-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-05-11blkdebug: Refactor error injectionEric Blake
Rather than repeat the logic at each caller of checking if a Rule exists that warrants an error injection, fold that logic into inject_error(); and rename it to rule_check() for legibility. This will help the next patch, which adds two more callers that need to check rules for the potential of injecting errors. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20170429191419.30051-6-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-05-11blkdebug: Sanity check block layer guaranteesEric Blake
Commits 04ed95f4 and 1a62d0ac updated the block layer to auto-fragment any I/O to fit within device boundaries. Additionally, when using a minimum alignment of 4k, we want to ensure the block layer does proper read-modify-write rather than requesting I/O on a slice of a sector. Let's enforce that the contract is obeyed when using blkdebug. For now, blkdebug only allows alignment overrides, and just inherits other limits from whatever device it is wrapping, but a future patch will further enhance things. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20170429191419.30051-5-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-05-09qobject: Use simpler QDict/QList scalar insertion macrosEric Blake
We now have macros in place to make it less verbose to add a scalar to QDict and QList, so use them. Patch created mechanically via: spatch --sp-file scripts/coccinelle/qobject.cocci \ --macro-file scripts/cocci-macro-file.h --dir . --in-place then touched up manually to fix a couple of '?:' back to original spacing, as well as avoiding a long line in monitor.c. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170427215821.19397-7-eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-08qobject: Drop useless QObject castsEric Blake
We have macros in place to make it less verbose to add a subtype of QObject to both QDict and QList. While we have made cleanups like this in the past (see commit fcfcd8ffc, for example), having it be automated by Coccinelle makes it easier to maintain. Patch created mechanically via: spatch --sp-file scripts/coccinelle/qobject.cocci \ --macro-file scripts/cocci-macro-file.h --dir . --in-place then I verified that no manual touchups were required. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170427215821.19397-5-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-28block: Add errp to BD.bdrv_truncate()Max Reitz
Add an Error parameter to the block drivers' bdrv_truncate() interface. If a block driver does not set this in case of an error, the generic bdrv_truncate() implementation will do so. Where it is obvious, this patch also makes some block drivers set this value. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20170328205129.15138-4-mreitz@redhat.com Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-28block: Add errp to b{lk,drv}_truncate()Max Reitz
For one thing, this allows us to drop the error message generation from qemu-img.c and blockdev.c and instead have it unified in bdrv_truncate(). Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20170328205129.15138-3-mreitz@redhat.com Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-27block: Do not unref bs->file on error in BD's openMax Reitz
The block layer takes care of removing the bs->file child if the block driver's bdrv_open()/bdrv_file_open() implementation fails. The block driver therefore does not need to do so, and indeed should not unless it sets bs->file to NULL afterwards -- because if this is not done, the bdrv_unref_child() in bdrv_open_inherit() will dereference the freed memory block at bs->file afterwards, which is not good. We can now decide whether to add a "bs->file = NULL;" after each of the offending bdrv_unref_child() invocations, or just drop them altogether. The latter is simpler, so let's do that. Cc: qemu-stable <qemu-stable@nongnu.org> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-02-28block: Request child permissions in filter driversKevin Wolf
All callers will have to request permissions for all of their child nodes. Block drivers that act as simply filters can use the default implementation of .bdrv_child_perm(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Fam Zheng <famz@redhat.com>
2017-02-24block: Pass BdrvChild to bdrv_truncate()Kevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-21blkdebug: reschedule coroutine on the AioContext it is running onPaolo Bonzini
Keep the coroutine on the same AioContext. Without this change, there would be a race between yielding the coroutine and reentering it. While the race cannot happen now, because the code only runs from a single AioContext, this will change with multiqueue support in the block layer. While doing the change, replace custom bottom half with aio_co_schedule. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170213135235.12274-10-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-09blkdebug: Implement bdrv_co_preadv/pwritev/flushKevin Wolf
This enables byte granularity requests for blkdebug, and at the same time gets us rid of another user of the BDS-level AIO emulation. Note that unless align=512 is specified, this can behave subtly different from the old behaviour because bdrv_co_preadv/pwritev don't have to perform alignment adjustments any more. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-10-07block: use aio_bh_schedule_oneshotPaolo Bonzini
This simplifies bottom half handlers by removing calls to qemu_bh_delete and thus removing the need to stash the bottom half pointer in the opaque datum. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-08-15block/blkdebug: Store config filenameMax Reitz
Store the configuration file's filename so it can later be used in bdrv_refresh_filename() without having to directly access the options QDict which may contain a value of a non-string type. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13coroutine: move entry argument to qemu_coroutine_createPaolo Bonzini
In practice the entry argument is always known at creation time, and it is confusing that sometimes qemu_coroutine_enter is used with a non-NULL argument to re-enter a coroutine (this happens in block/sheepdog.c and tests/test-coroutine.c). So pass the opaque value at creation time, for consistency with e.g. aio_bh_new. Mostly done with the following semantic patch: @ entry1 @ expression entry, arg, co; @@ - co = qemu_coroutine_create(entry); + co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry2 @ expression entry, arg; identifier co; @@ - Coroutine *co = qemu_coroutine_create(entry); + Coroutine *co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry3 @ expression entry, arg; @@ - qemu_coroutine_enter(qemu_coroutine_create(entry), arg); + qemu_coroutine_enter(qemu_coroutine_create(entry, arg)); @ reentry @ expression co; @@ - qemu_coroutine_enter(co, NULL); + qemu_coroutine_enter(co); except for the aforementioned few places where the semantic patch stumbled (as expected) and for test_co_queue, which would otherwise produce an uninitialized variable warning. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-05block: Convert bdrv_aio_writev() to BdrvChildKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-05block: Convert bdrv_aio_readv() to BdrvChildKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-05block: Move request_alignment into BlockLimitEric Blake
It makes more sense to have ALL block size limit constraints in the same struct. Improve the documentation while at it. Simplify a couple of conditionals, now that we have audited and documented that request_alignment is always non-zero. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-05blkdebug: Set request_alignment during .bdrv_refresh_limits()Eric Blake
We want to eventually stick request_alignment alongside other BlockLimits, but first, we must ensure it is populated at the same time as all other limits, rather than being a special case that is set only when a block is first opened. Note that when the user does not provide "align", then we were defaulting to bs->request_alignment - but at this stage in the initialization, that was always 512. We were also rejecting an explicit "align":0 from the user; this patch now allows that, as an explicit request for the default alignment (which may not always be 512 in the future). qemu-iotests 77 is particularly sensitive to the fact that we can specify an artificial alignment override in blkdebug, and that override must continue to work even when limits are refreshed on an already open device. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-20block: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-12-18blkdebug: Enable reopenKevin Wolf
Just reopening the children (as block.c does now) is enough. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
2015-12-18block: Pass driver-specific options to .bdrv_refresh_filename()Kevin Wolf
In order to decide whether a blkdebug: filename can be produced or a json: one is necessary, blkdebug checked whether bs->options had more options than just "config", "x-image" or "image" (the latter including nested options). That doesn't work well when generic block layer options are present. This patch passes an option QDict to the driver that contains only driver-specific options, i.e. the options for the general block layer as well as child nodes are already filtered out. Works much better this way. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
2015-12-17qapi: Don't let implicit enum MAX member collideEric Blake
Now that we guarantee the user doesn't have any enum values beginning with a single underscore, we can use that for our own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious that the sentinel is generated. This patch was mostly generated by applying a temporary patch: |diff --git a/scripts/qapi.py b/scripts/qapi.py |index e6d014b..b862ec9 100644 |--- a/scripts/qapi.py |+++ b/scripts/qapi.py |@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = { | max_index = c_enum_const(name, 'MAX', prefix) | ret += mcgen(''' | [%(max_index)s] = NULL, |+// %(max_index)s | }; | ''', | max_index=max_index) then running: $ cat qapi-{types,event}.c tests/test-qapi-types.c | sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list $ git grep -l _MAX | xargs sed -i -f list The only things not generated are the changes in scripts/qapi.py. Rejecting enum members named 'MAX' is now useless, and will be dropped in the next patch. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> [Rebased to current master, commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17blkdebug: Merge hand-rolled and qapi BlkdebugEvent enumEric Blake
No need to keep two separate enums, where editing one is likely to forget the other. Now that we can specify a qapi enum prefix, we don't even have to change the bulk of the uses. get_event_by_name() could perhaps be replaced by qapi_enum_parse(), but I left that for another day. CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1447836791-369-20-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-02blkdebug: silence warning under qtestMichael S. Tsirkin
make check always outputs warnings, this is not nice. Disable blkdebug warnings under qtest. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 1448883874-17933-1-git-send-email-mst@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-10-16blkdebug: Don't confuse image as backing fileFam Zheng
The word "backing file" nowadays refers to the backing_hd in the external snapshot sense (i.e. bs->backing_hd), instead of the file sense (bs->file). Correct the comment to use the right term. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-16block: Convert bs->file to BdrvChildKevin Wolf
This patch removes the temporary duplication between bs->file and bs->file_child by converting everything to BdrvChild. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12block: Move flag inheritance to bdrv_open_inherit()Kevin Wolf
Instead of letting every caller of bdrv_open() determine the right flags for its child node manually and pass them to the function, pass the parent node and the role of the newly opened child (like backing file, protocol layer, etc.). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-06-09blkdebug: Simplify passing of Error through qemu_opts_foreach()Markus Armbruster
Cc: Kevin Wolf <kwolf@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com>
2015-06-09QemuOpts: Convert qemu_opts_foreach() to ErrorMarkus Armbruster
Retain the function value for now, to permit selective conversion of its callers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com>
2015-06-08QemuOpts: Drop qemu_opts_foreach() parameter abort_on_failureMarkus Armbruster
When the argument is non-zero, qemu_opts_foreach() stops on callback returning non-zero, and returns that value. When the argument is zero, it doesn't stop, and returns the bit-wise inclusive or of all the return values. Funky :) The callers that pass zero could just as well pass one, because their callbacks can't return anything but zero: * qemu_add_globals()'s callback qdev_add_one_global() * qemu_config_write()'s callback config_write_opts() * main()'s callbacks default_driver_check(), drive_enable_snapshot(), vnc_init_func() Drop the parameter, and always stop. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28blkdebug: Add bdrv_truncate()Kevin Wolf
This is, amongst others, required for qemu-iotests 033 to run as intended on VHDX, which uses explicit bdrv_truncate() calls to bs->file when allocating new blocks. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2015-03-10blkdebug: fix "once" ruleJohn Snow
Background: The blkdebug scripts are currently engineered so that when a debug event occurs, a prefilter browses a master list of parsed rules for a certain event and adds them to an "active list" of rules to be used for the forthcoming action, provided the events and state numbers match. Then, once the request is received, the last active rule is used to inject an error if certain parameters match. This active list is cleared every time the prefilter injects a new rule for the first time during a debug event. The "once" rule currently causes the error injection, if it is triggered, to only clear the active list. This is insufficient for preventing future injections of the same rule. Remedy: This patch /deletes/ the rule from the list that the prefilter browses, so it is gone for good. In V2, we remove only the rule of interest from the active list instead of allowing the "once" rule to clear the entire list of active rules. Impact: This affects iotests 026. Several ENOSPC tests that used "once" can be seen to have output that shows multiple failure messages. After this patch, the error messages tend to be smaller and less severe, but the injection can still be seen to be working. I have patched the expected output to expect the smaller error messages. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1423257977-25630-1-git-send-email-jsnow@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10blkdebug: Simplify and improve filename generationMax Reitz
Instead of actually recreating the options from scratch, just reuse the options given for creating the BDS, which are the configuration file name and additional options. In case there are no additional options we can thus create a plain filename. This obviously results in a different output for qemu-iotest 099 which exactly tests this filename generation. Fix it up as well. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1415697825-26678-2-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-03qcow2: Optimize bdrv_make_empty()Max Reitz
bdrv_make_empty() is currently only called if the current image represents an external snapshot that has been committed to its base image; it is therefore unlikely to have internal snapshots. In this case, bdrv_make_empty() can be greatly sped up by emptying the L1 and refcount table (while having the dirty flag set, which only works for compat=1.1) and creating a trivial refcount structure. If there are snapshots or for compat=0.10, fall back to the simple implementation (discard all clusters). [Applied s/clusters/cluster/ typo fix suggested by Eric Blake --Stefan] Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1414159063-25977-4-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-20block: Rename BlockDriverCompletionFunc to BlockCompletionFuncMarkus Armbruster
I'll use it with block backends shortly, and the name is going to fit badly there. It's a block layer thing anyway, not just a block driver thing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20block: Rename BlockDriverAIOCB* to BlockAIOCB*Markus Armbruster
I'll use BlockDriverAIOCB with block backends shortly, and the name is going to fit badly there. It's a block layer thing anyway, not just a block driver thing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-25blkdebug: show an error for invalid event namesStefan Hajnoczi
It is easy to typo a blkdebug configuration and waste a lot of time figuring out why no rules are matching. Push the Error** down into add_rule() so we can report an error when the event name is invalid. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-22block: Rename qemu_aio_release -> qemu_aio_unrefFam Zheng
Suggested-by: Benoît Canet <benoit.canet@irqsave.net> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22blkdebug: Drop blkdebug_aiocb_info.cancelFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-14 09:42:37 +0000