aboutsummaryrefslogtreecommitdiff
path: root/block-migration.c
AgeCommit message (Collapse)Author
2011-02-07block: enable in_use flagMarcelo Tosatti
Set block device in use during block migration, disallow drive_del and bdrv_truncate for in use devices. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-02-07block-migration: add reference to target DriveInfoMarcelo Tosatti
So that ejection of attached device by guest does not free data in use by block migration instance. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> CC: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-02-07block-migration: actually disable dirty tracking on cleanupMarcelo Tosatti
Call to set_dirty_tracking() is misplaced. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24Fix block migration when the device size is not a multiple of 1 MBPierre Riteau
b02bea3a85cc939f09aa674a3f1e4f36d418c007 added a check on the return value of bdrv_write and aborts migration when it fails. However, if the size of the block device to migrate is not a multiple of BLOCK_SIZE (currently 1 MB), the last bdrv_write will fail with -EIO. Fixed by calling bdrv_write with the correct size of the last block. Signed-off-by: Pierre Riteau <Pierre.Riteau@irisa.fr> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24Avoid divide by zero when there is no block device to migratePierre Riteau
When block migration is requested and no read-write block device is present, a divide by zero exception is triggered because total_sector_sum equals zero. Signed-off-by: Pierre Riteau <Pierre.Riteau@irisa.fr> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-24block migration: do not submit multiple AIOs for same sector (v2)Marcelo Tosatti
An old version of this patch was applied to master, so this contains the differences between v1 and v2. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-21block migration: do not submit multiple AIOs for same sectorMarcelo Tosatti
Block migration can submit multiple AIO reads for the same sector/chunk, but completion of such reads can happen out of order: migration guest - get_dirty(N) - aio_read(N) - clear_dirty(N) write(N) set_dirty(N) - get_dirty(N) - aio_read(N) If the first aio_read completes after the second, stale data will be migrated to the destination. Fix by not allowing multiple AIOs inflight for the same sector. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-03block migration: replace tabs by spaces.Yoshiaki Tamura
Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-26block migration: propagate return value when bdrv_write() returns < 0Yoshiaki Tamura
Currently block_load() doesn't check return value of bdrv_write(), and even the destination weren't prepared to execute block migration, it proceeds and guest boots on the target. This patch fix this issue. Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-13Block migration fail, ignore error from bdrv_getlengthShahar Havivi
When there is no block driver associate with BlockDriverState bdrv_getlength returns -ENOMEDIUM that cause block migration to fail Signed-off-by: Shahar Havivi <shaharh@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06Merge remote branch 'kwolf/for-anthony' into stagingAnthony Liguori
2010-07-06savevm: Add DeviceState paramAlex Williamson
When available, we'd like to be able to access the DeviceState when registering a savevm. For buses with a get_dev_path() function, this will allow us to create more unique savevm id strings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06block migration: Fix test for read-only driveMarkus Armbruster
init_blk_migration_it() skips drives with type hint BDRV_TYPE_CDROM. The intention is to skip read-only drives. However, BDRV_TYPE_CDROM is only a hint. It is currently sufficent for read-only. But it's not necessary, and it may not remain sufficient. Use bdrv_is_read_only() instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-23block: Do not export bdrv_firstStefan Hajnoczi
The bdrv_first linked list of BlockDriverStates is currently extern so that block migration can iterate the list. However, since there is already a bdrv_iterate() function there is no need to expose bdrv_first. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-02-09Try not to exceed max downtime on stage3Liran Schour
Move to stage3 only when remaining work can be done below max downtime. Use qemu_get_clock_ns for measuring read performance. Signed-off-by: Liran Schour <lirans@il.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-09Tranfer dirty blocks during iterative phaseLiran Schour
Start transfer dirty blocks during the iterative stage. That will reduce the time that the guest will be suspended Signed-off-by: Liran Schour <lirans@il.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-09Remove unused codeLiran Schour
blk_mig_save_bulked_block is never called with sync flag. Remove the sync flag. Calculate bulk completion during blk_mig_save_bulked_block. Remove unused constants. Signed-off-by: Liran Schour <lirans@il.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-07Do not use dprintfmalc
dprintf is already claimed by POSIX[1], and on at least one system is implemented as a macro [1] http://www.opengroup.org/onlinepubs/9699919799/functions/dprintf.html Signed-off-by: malc <av1474@comtv.ru>
2009-12-03block migration: Skip zero-sized disksJan Kiszka
No need to migrate emptiness (risking divide by zero later on). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Add support for restore progress reportingJan Kiszka
Inject progress report in percentage into the block live stream. This can be read out and displayed easily on restore. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Report progress also via info migrationJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Fix outgoing progress outputJan Kiszka
Report progress of an outgoing live migration to the monitor instead of stdout. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03live migration: Propagate output monitor to callback handlerJan Kiszka
In order to allow proper progress reporting to the monitor that initiated the migration, forward the monitor reference through the migration layer down to SaveLiveStateHandler. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Report overall migration progressJan Kiszka
So far progress reporting only works for the first block device. Fix this by keeping an overall sum of sectors to be migratated, calculating the sum of all processed sectors, and finally basing the progress display on those values. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03live migration: Allow cleanup after cancellation or errorJan Kiszka
Introduce qemu_savevm_state_cancel and inject a stage -1 to cancel a live migration. This gives the involved subsystems a chance to clean up dynamically allocated resources. Namely, the block migration layer can now free its device descriptors and pending blocks. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Add error handling/propagationJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Consolidate block transmissionJan Kiszka
Based on the original patch by Pierre Riteau: Use a common blk_send function to transmit a block. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Consolidate mig_read_device_bulk into mig_save_device_bulkJan Kiszka
Both functions share a lot of code, so make them one. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Clean up use of total_sectorsJan Kiszka
We already save total_sectors in BlkMigDevState, let's use this value during the migration and avoid to recalculate it needlessly. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Initialize remaining BlkMigState fieldsJan Kiszka
In case we restart a migration, submitted, read_done, transferred, and print_completion need to be reinitialized to 0. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Switch device and block lists to QSIMPLEQJan Kiszka
Based on the original patch by Pierre Riteau. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Drop dead codeJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Avoid indirection of block_mig_stateJan Kiszka
No need to push block_mig_state to the heap and, thus, establish an indirection. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Avoid large stack bufferJan Kiszka
Move a potentially large buffer from stack to heap. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Rework constants APIJan Kiszka
Instead of duplicating the definition of constants or introducing trivial retrieval functions move the SECTOR constants into the public block API. This also obsoletes sector_per_block in BlkMigState. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03block migration: Fix coding style and whitespacesJan Kiszka
No functional changes. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-17Fix mingw32 buildBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-11-17Block live migrationlirans@il.ibm.com
This patch introduces block migration called during live migration. Block are being copied to the destination in an async way. First the code will transfer the whole disk and then transfer all dirty blocks accumulted during the migration. Still need to improve transition from the iterative phase of migration to the end phase. For now transition will take place when all blocks transfered once, all the dirty blocks will be transfered during the end phase (guest is suspended). Changes from v4: - Global variabels moved to a global state structure allocated dynamically. - Minor coding style issues. - Poll block.c for tracking of dirty blocks instead of manage it here. Signed-off-by: Liran Schour <lirans@il.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-01 18:50:16 +0000