aboutsummaryrefslogtreecommitdiff
path: root/Makefile.target
AgeCommit message (Collapse)Author
2010-01-08finish VPATH -> vpath translationPaolo Bonzini
This adds a few more vpath suffixes and points the remaining two paths explicitly to $(SRC_PATH) in order to eliminate the VPATH assignment from config-host.mak. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-08multiboot: Separate multiboot loading into separate fileAdam Lackorzynski
Move multiboot loading code into separate files as suggested by Alex Graf. Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-08debugcon: support for debugging consoles (e.g. Bochs port 0xe9)H. Peter Anvin
Add generic support for debugging consoles (simple I/O ports which when written to cause debugging output to be written to a target.) The current implementation matches Bochs' port 0xe9, allowing the same debugging code to be used for both Bochs and Qemu. There is no vm state associated with the debugging port, simply because it has none -- the entire interface is a single, stateless, write-only port. Most of the code was cribbed from the serial port driver. v2: removed non-ISA variants (they can be introduced when/if someone wants them, using code from the serial port); added configurable readback (Bochs returns 0xe9 on a read from this register, mimic that by default) This retains the apparently somewhat controversial user friendly option, however. v3: reimplemented the user friendly option as a synthetic option ("-debugcon foo" basically ends up being a parser-level shorthand for "-chardev stdio,id=debugcon -device isa-debugcon,chardev=debugcon") -- this dramatically reduced the complexity while keeping the same level of user friendliness. v4: spaces, not tabs. v5: update to match current top of tree. Calling qemu_chr_open() already during parsing no longer works; defer until we are parsing the other console-like devices. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-08Use vpath directivePaolo Bonzini
The vpath directive has two advantages over the VPATH variable: 1) it allows to skip searching of .o files; 2) the default semantics are to append to the vpath, so there is no confusion between "VPATH=xyz" and "VPATH+=xyz". Since "vpath %.c %.h PATH" is not valid, I'm introducing a wrapper macro to append one or more directories to the vpath. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-07Drop --whole-archive and static librariesAndreas Färber
Juan has contributed a cool Makefile infrastructure that enables us to drop static libraries completely: Move shared obj-y definitions to Makefile.objs, prefixed {common-,hw-,user-}, and link those object files directly into the executables. Replace HWLIB by HWDIR, specifying only the directory. Drop --whole-archive and ARLIBS in Makefiles and configure. Drop GENERATED_HEADERS dependency in rules.mak, since this rebuilds all common objects after generating a target-specific header; add dependency rules to Makefile and Makefile.target instead. v2: - Don't try to include /config.mak for user emulators - Changes to user object paths ("Quickfix for libuser.a drop") were obsoleted by "user_only: compile everything with -fpie" (Kirill A. Shutemov) v3: - Fix dependency modelling for tools - Remove comment on GENERATED_HEADERS obsoleted by this patch Signed-off-by: Andreas Färber <afaerber@opensolaris.org> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Palle Lyckegaard <palle@lyckegaard.dk> Cc: Ben Taylor <bentaylor.solx86@gmail.com> Cc: Juan Quintela <quintela@trasno.org> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-05Add S390x virtio machine descriptionAlexander Graf
In order to use the new S390x virtio bus we just introduced, we also need a machine description that sets up the machine according to our PV specification. Let's add that machine description and be happy! Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-05Add S390x virtio machine busAlexander Graf
On S390x we don't want to go through the hassle of emulating real existing hardware, because we don't need to for running Linux. So let's instead implement a machine that is 100% based on VirtIO which we fortunately implement already. This patch implements the bus that is the groundwork for such an S390x virtio machine. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-03Remove rule for config-devices.hStefan Weil
Since commit a992fe3d0fc185112677286f7a02204d8245b61e config-devices.h is no longer used. So there is no need to keep the dependency rules any longer. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-22Makefile dependencies for device configsPaul Brook
Add makefile dependencies for target specific device configs. These will copy the default config if none exists, obsoleting the old configure time code. If a config already exists but is older than the default then print a warning. Also remove config-devices.h. Code does not and should not care which devices are being built. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-19ARM PBX-A9 board supportPaul Brook
Implement ARM RealView PBX-A9 board support. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-19Built network devices oncePaul Brook
Move some generic NICS into libhw, and build them for ARM targets. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-16LAN9118 emulationPaul Brook
Add SMSC LAN9118 ethernet emulation. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-12fix parallel buildJuan Quintela
Based on a ideas of Daniel Jacobowitz + Stefan Weil Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: pcie host and mmcfg support.Isaku Yamahata
This patch adds common routines for pcie host bridge and pcie mmcfg. This will be used by q35 based chipset emulation. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci_host.h: move functions in pci_host.h into .c file.Isaku Yamahata
split static functions in pci_host.h into pci_host.c and pci_host_template.h. Later a structures declared in pci_host.h, PCIHostState, will be used. However pci_host.h doesn't allow to include itself easily. This patches addresses it. pci_host.h includes functions which are instantiated in .c by including pci_host.h with typedefing pci_addr_t. pci_addr_t is per pci host bridge and is typedef'ed to uint32_t for ioio or target_phys_addr_t for mmio in .c file. That prevents from including pci_host.h to use PCIHostState because of requiring type, pci_addr_t. Its purpose to include is to instantiate io function for mmio or ioio depending on which pci host bridge requires ioio or mmio. To avoid including code, we always instantiate both version. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27Split out bottom halvesKevin Wolf
Instead of putting more and more stuff into vl.c, let's have the generic functions that deal with asynchronous callbacks in their own file. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27pcnet: split away lance.c (sparc32 code).Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-12ide: split cmd646 and piix from pci.cJuan Quintela
This patch splits cmd646 specific code from pci.c. This patch splits piix4 specific code from pci.c. And compile new piix.o and cmd646.o when they are needed. The only change that is not code movemet is removal of cmd646 specific parts in bmdma_readb/writeb for piix. Patchworks-ID: 35301 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Only compile isa_mmio when one target uses itJuan Quintela
Patchworks-ID: 35200 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Only compile usb_ohci when one target uses itJuan Quintela
Patchworks-ID: 35199 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Generate gdbstub-xml.c only when neededJuan Quintela
First user of new config-devices.mak Patchworks-ID: 35198 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Generate config-devices.hJuan Quintela
Generate config-devices.h for each target and config-all-devices.h for common library. We don't want to name both config-devices.h to avoid path problems Patchworks-ID: 35195 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Add new config-devices.mak for each targetJuan Quintela
We generate config-devices.h from there automatically. We need to do it in main Makefile, because we are going to need a main Makefile for them. Patchworks-ID: 35196 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Move generation of config-target.h to Makefile from configureJuan Quintela
Patchworks-ID: 35194 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Rename config.{h, mak} config-target.{h, mak}Juan Quintela
Add config.h file that includes config-target.h and config-host.h Patchworks-ID: 35193 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Don't include config-host.mak from inside config.makJuan Quintela
Include it directly in Makefile.target Patchworks-ID: 35189 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-27Compile some user files only once for all targetsBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-27Fix user emulator breakageBlue Swirl
Fix breakage in the following conditions: - use in-tree building - build user targets after system targets Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-25Revert "This files are compiled in libqemu.a now"Blue Swirl
This reverts commit fe6549dfd76c278dbcd788b3c15c5e6e5ed32190. tcg-runtime and host-utils are needed on 32 bit host and they are not part of libqemu.a. Thanks to Stefan Weil for reporting. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-25clean: remove ide/*.o files on cleanJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-09-23This files are compiled in libqemu.a nowJuan Quintela
This fixes compilation of linux-user with today qemu, please apply. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-09-21Fix user targets broken by 96e132e24ee5a693069e83b6a981693588b088c1Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-20Compile host-utils only onceBlue Swirl
See also facd2857783d58387885ad7cb1e4a8386f241738 and 34005a0060c176b3025a9e7c5d064615a9f80325. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-20Compile TCG runtime library only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-20Compile ne2000 only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-20ioports: remove unused env parameter and compile only onceBlue Swirl
The CPU state parameter is not used, remove it and adjust callers. Now we can compile ioport.c once for all targets. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-20Compile msix only onceBlue Swirl
Get page size in device init. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-20Compile loader only onceBlue Swirl
Callers must pass ELF machine, byte swapping and symbol LSB clearing information to ELF loader. A.out loader needs page size information, pass that too as a parameter. Extract prototypes to a separate file. Move loader.[ch] and elf_ops.h under hw. Adjust callers. Also use target_phys_addr_t instead of target_ulong for addresses: loader addresses aren't virtual. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-20Compile qemu-config only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-20Compile wdt_i6300esb only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-15ide/pci: convert to qdev.Gerd Hoffmann
With this patch applied ide drives (when attached to a pci adapter) can be created via -device, like this: -drive if=none,id=mydisk,file=/path/to/disk.img -device ide-drive,drive=mydisk,bus=ide.0,unit=0 Note that creating a master on ide1 doesn't work that way. That is a side effect of qemu creating a cdrom automagically even if you don't ask for it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-14Fix breakage by f80237d45032fbc429aba3b597175fb544a11378 for ISA-less targetsBlue Swirl
Move ISA bus to HW library. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-12Add configure option to compile user targets as PIEKirill A. Shutemov
Build uset targers as true PIE if user want to keep qemu self-virtualizable. v5: - Split into to patches: drop link hack and add PIE support - do not build PIE by default and drop toolchain check v4: - Add test for toolchain if it has proper PIE support v3: - One more pice of the hack was removed - Description updated v2: - Add configure options do enable/disable PIE for usermode targets. Disabling can be useful if you build uswing toolchain which has broken PIE support. PIE for usermode targets enabled by default. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-10qdev/isa: convert ne2000Gerd Hoffmann
Also split the isa bits into a separate source file, so we don't drag in a dependency for isa-bus.o for machines which want ne2k_pci only. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-09-09vga: split vga-isa-mm.oJuan Quintela
It is only used in mips softmmu, compile only there. it_shift field was only used for vga_isa_mm, move it from VGACommonState to ISAVGAMMstate. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09vga: split isa bits inco vga-isa.cJuan Quintela
Adjust all the VGAState in VGACommonState Compile vga-isa.o in the targets that use it Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09vga: split pci bits into vga-pci.cJuan Quintela
Adjust all the VGAState in VGACommonState Compile vga-pci.o only for targets that use it. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04Split piix4 support from piix_pci.cJuan Quintela
Now mips_malta uses piix4 and pc's use piix_pci definitions Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27ide: move code to hw/ide/Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27ide: split away ide-microdrive.cGerd Hoffmann
create ide-microdrive.c and place microdrive support there. only build ide-microdrive support for platforms using it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-14 22:58:25 +0000