| Age | Commit message (Collapse) | Author |
|---|
|
Adds VSS provider and requester as a qga-vss.dll, which is loaded by
Windows VSS service as well as by qemu-ga.
"provider.cpp" implements a basic stub of a software VSS provider.
Currently, this module only relays a frozen event from VSS service to the
agent, and thaw event from the agent to VSS service, to block VSS process
to keep the system frozen while snapshots are taken at the host.
To register the provider to the guest system as COM+ application, the type
library (.tlb) for qga-vss.dll is required. To build it from COM IDL (.idl),
VisualC++, MIDL and stdole2.tlb in Windows SDK are required. This patch also
adds pre-compiled .tlb file in the repository in order to enable
cross-compile qemu-ga.exe for Windows with VSS support.
"requester.cpp" provides the VSS requester to kick the VSS snapshot process.
Qemu-ga.exe works without the DLL, although fsfreeze features are disabled.
These functions are only supported in Windows 2003 or later. In older
systems, fsfreeze features are disabled.
In several versions of Windows which don't support attribute
VSS_VOLSNAP_ATTR_NO_AUTORECOVERY, DoSnapshotSet fails with error
VSS_E_OBJECT_NOT_FOUND. In this patch, we just ignore this error.
To solve this fundamentally, we need a framework to handle mount writable
snapshot on guests, which is required by VSS auto-recovery feature
(cleanup phase after a snapshot is taken).
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
QEMU executables for w32, w64 had included meta information built from
version.rc. These rules were changed several times some months ago.
The latest version added version.o to the tools, but not to the system
emulations.
This patch adds the meta information to all system emulations again.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1375985887-3984-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Code that does need to be visible is kept
well contained inside this file and this is the only
new additional file to the entire patch.
This file includes the entire protocol and interfaces
required to perform RDMA migration.
Also, the configure and Makefile modifications to link
this file are included.
Full documentation is in docs/rdma.txt
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
It was decided to not make this command available in QMP in order to
make clear that this is not supposed to be a stable API and should be
used only for testing and debugging purposes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This property will be useful for libvirt, as libvirt already has logic
based on low-level feature bits (not feature names), so it will be
really easy to convert the current libvirt logic to something using the
"feature-words" property.
The property will have two main use cases:
- Checking host capabilities, by checking the features of the "host"
CPU model
- Checking which features are enabled on each CPU model
Example output:
$ ./QMP/qmp --path=/tmp/m \
qom-get --path=/machine/icc-bridge/icc/child[0] \
--property=feature-words
item[0].cpuid-register: EDX
item[0].cpuid-input-eax: 2147483658
item[0].features: 0
item[1].cpuid-register: EAX
item[1].cpuid-input-eax: 1073741825
item[1].features: 0
item[2].cpuid-register: EDX
item[2].cpuid-input-eax: 3221225473
item[2].features: 0
item[3].cpuid-register: ECX
item[3].cpuid-input-eax: 2147483649
item[3].features: 101
item[4].cpuid-register: EDX
item[4].cpuid-input-eax: 2147483649
item[4].features: 563346425
item[5].cpuid-register: EBX
item[5].cpuid-input-eax: 7
item[5].features: 0
item[5].cpuid-input-ecx: 0
item[6].cpuid-register: ECX
item[6].cpuid-input-eax: 1
item[6].features: 2155880449
item[7].cpuid-register: EDX
item[7].cpuid-input-eax: 1
item[7].features: 126614521
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Only because qemu's checkpatch complains about it.
Signed-off-by: Alon Levy <alevy@redhat.com>
Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
|
|
The TPM subsystem does not have a full front-end/back-end separation.
The sole available backend, tpm_passthrough, depends on the data
structures of the sole available frontend, tpm_tis.
However, we can at least try to split the user interface (tpm.c) from the
implementation (hw/tpm). The patches makes tpm.c not include tpm_int.h,
which is shared between tpm_tis.c and tpm_passthrough.c; instead it
moves more stuff to tpm_backend.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The gthread coroutine backend is broken and does not produce a working
QEMU; it is only useful for some very limited debugging situations.
Clean up the backend selection logic in configure so that it now runs
"if on windows use windows; else prefer ucontext; else sigaltstack".
To do this we refactor the configure code to separate out "test
whether we have a working ucontext", "pick a default if user didn't
specify" and "validate that user didn't specify something invalid",
rather than having all three of these run together. We also simplify
the Makefile logic so it just links in the backend the configure
script selects.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1365419487-19867-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch adds support for TPM command line options.
The command line options supported here are
./qemu-... -tpmdev passthrough,path=<path to TPM device>,id=<id>
-device tpm-tis,tpmdev=<id>,id=<other id>
and
./qemu-... -tpmdev help
where the latter works similar to -soundhw help and shows a list of
available TPM backends (for example 'passthrough').
Using the type parameter, the backend is chosen, i.e., 'passthrough' for the
passthrough driver. The interpretation of the other parameters along
with determining whether enough parameters were provided is pushed into
the backend driver, which needs to implement the interface function
'create' and return a TPMDriverOpts structure if the VM can be started or
'NULL' if not enough or bad parameters were provided.
Monitor support for 'info tpm' has been added. It for example prints the
following:
(qemu) info tpm
TPM devices:
tpm0: model=tpm-tis
\ tpm0: type=passthrough,path=/dev/tpm0,cancel-path=/sys/devices/pnp0/00:09/cancel
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-2-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The situation with device-hotplug.c is similar to qdev-monitor.c.
Add a stub for pci_drive_hot_add, so that it can be compiled once,
and move it out of hw/.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
qdev-monitor.c is the only "core qdev" file that is not used in
user-mode emulation, and it does not define anything that is used
by hardware models. Remove it from the hw/ directory and
remove hw/qdev-monitor.h from hw/qdev.h too; this requires
some files to have some new explicitly includes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Introduce [qtest_]{read,write}[bwlq]() libqtest functions and
corresponding QTest protocol commands to replace local versions in
libi2c-omap.c.
Also convert m48t59-test's cmos_{read,write}_mmio() to {read,write}b().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1361051043-27944-4-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
extra-obj-y is somewhat complicated to understand. Replace it with a
special CONFIG_ALL symbol that is defined only at toplevel.
This limits the case of directories defining more than one
*-obj-y target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
All of universal-obj-y, user-obj-y (right now unused) and common-obj-y can
be unified into common-obj-y if we take care of defining CONFIG_SOFTMMU
and CONFIG_USER_ONLY in the toplevel makefile. This is similar to how
we define symbols for hardware components.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
It is also needed if !CONFIG_SOFTMMU, unlike everything that surrounds it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Just fold it into block-obj-y.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is no reason for it to be in block-obj-y, in particular.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is no reason why for example qemu-ga should include all the
definitions for the QEMU monitor. However, there are a few
that are needed (qapi_free_SocketAddress, qapi_free_InetSocketAddress,
ErrorClass_lookup). These should be moved to a separate "core"
.json schema that goes into libqemuutil.a.
For now, make this clearer by moving the qapi-*.o definitions out
of libqemuutil.a. Once the above refactoring is done, qga-obj-y
should not include anymore qapi-types.o and qapi-visit.o.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The directory descent mechanism, and a less-flat tree both helped
in making some *-obj-y definitions very short. Many of these
often end up in universal-obj-y, and used to be separate only
because of libuser (which is now part of history...).
Consolidate these variables in a single one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Split them between libqemuutil.a and, for those used by qemu-img/io/nbd,
block-obj-y.
Static libraries ensure that binaries such as qemu-ga do not include
unused modules.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use a static library to eliminate repetition in the linking rules.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This prepares the creation of libqemuutil.a in the next patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The code depends on some functions from qemu-option.o, so add
qemu-option.o to universal-obj-y to make sure it's included.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Add support for compiling for GCOV test coverage, enabled
with '--enable-gcov' during configure.
Test coverage will be reported after each test.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
--
Changes in v2:
* Do not depend on "qemu-timer-common.o".
* Use "$(obj)" in rules to refer to the build sub-directory.
* Remove dependencies against "$(GENERATED_HEADERS)".
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This only moves the code (also from buffered_file.h to migration.h).
Fix whitespace until checkpatch is happy.
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Weak symbols were a nice idea, but they turned out not to be a good one.
Toolchain support is just too sparse, in particular llvm-gcc is totally
broken.
This patch uses a surprisingly low-tech approach: a static library.
Symbols in a static library are always overridden by symbols in an
object file. Furthermore, if you place each function in a separate
source file, object files for unused functions will not be taken in.
This means that each function can use all the dependencies that it needs
(especially QAPI stuff such as error_setg).
Thus, all stubs are placed in separate object files and put together in
a static library. The library then is linked to all programs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
This is the backend used by devices that need to request entropy.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Replaced by pixman library.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
* kraxel/pixman.v3: (22 commits)
pixman: drop obsolete fields from DisplaySurface
pixman/vnc: remove dead code.
pixman/vnc: remove rgb_prepare_row* functions
pixman/vnc: use pixman images in vnc.
pixman: switch screendump function.
vga: stop direct access to DisplaySurface fields.
qxl: stop direct access to DisplaySurface fields.
console: don't set PixelFormat alpha fields for 32bpp
console: make qemu_alloc_display static
pixman: add pixman image to DisplaySurface
pixman: helper functions
pixman: windup in configure & makefiles
pixman: add submodule
console: remove DisplayAllocator
console: remove dpy_gfx_fill
vga: fix text mode updating
console: init displaychangelisteners on register
console: untangle gfx & txt updates
console: s/TextConsole/QemuConsole/
console: move set_mouse + cursor_define callbacks
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Add some helper functions which will be put
into use by following patches.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Making the qemu_paiocb specific to raw devices will let us access members
of the BDRVRawState arbitrarily.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a generic thread-pool. The code is roughly based on posix-aio-compat.c,
with some changes, especially the following:
- use QemuSemaphore instead of QemuCond;
- separate the state of the thread from the return code of the worker
function. The return code is totally opaque for the thread pool;
- do not busy wait when doing cancellation.
A more generic threadpool (but still specific to I/O so that in the future
it can use special scheduling classes or PI mutexes) can have many uses:
it allows more flexibility in raw-posix.c and can more easily be extended
to Win32, and it will also be used to do an msync of the persistent bitmap.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The Win32 implementation will only accept EventNotifiers, thus a few
drivers are disabled under Windows. EventNotifiers are a good match
for the GSource implementation, too, because the Win32 port of glib
allows to place their HANDLEs in a GPollFD.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This adds to aio.c a platform-independent API based on EventNotifiers, that
can be used by both POSIX and Win32.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
