aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-07-02hw/sd/sdcard: Assign SDCardStates enum valuesPhilippe Mathieu-Daudé
SDCardStates enum values are specified, so assign them correspondingly. It will be useful later when we add states from later specs, which might not be continuous. See CURRENT_STATE bits in section 4.10.1 "Card Status". Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20240628070216.92609-11-philmd@linaro.org>
2024-07-02hw/sd/sdcard: Use READY_FOR_DATA definition instead of magic valuePhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20240628070216.92609-10-philmd@linaro.org>
2024-07-02hw/sd/sdcard: Send NUM_WR_BLOCKS bits MSB first (ACMD22)Philippe Mathieu-Daudé
Per sections 3.6.1 (SD Bus Protocol), 4.3.4 "Data Write" and 7.3.2 (Responses): In the CMD line the Most Significant Bit is transmitted first. Use the stl_be_p() helper to store the value in big-endian. Fixes: a1bb27b1e9 ("Initial SD card emulation") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20240628070216.92609-9-philmd@linaro.org>
2024-07-02hw/sd/sdcard: Send WRITE_PROT bits MSB first (CMD30)Philippe Mathieu-Daudé
Per sections 3.6.1 (SD Bus Protocol) and 7.3.2 (Responses): In the CMD line the Most Significant Bit is transmitted first. Use the stl_be_p() helper to store the value in big-endian. Fixes: a1bb27b1e9 ("Initial SD card emulation") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20240628070216.92609-8-philmd@linaro.org>
2024-07-02hw/sd/sdcard: Restrict SWITCH_FUNCTION to sd_transfer_state (CMD6)Philippe Mathieu-Daudé
SWITCH_FUNCTION is only allowed in TRANSFER state (See 4.8 "Card State Transition Table). Fixes: a1bb27b1e9 ("Initial SD card emulation") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20240628070216.92609-13-philmd@linaro.org>
2024-07-02hw/sd/sdcard: Trace requested address computed by sd_req_get_address()Philippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Luc Michel <luc.michel@amd.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20240628070216.92609-6-philmd@linaro.org>
2024-07-02hw/sd/sdcard: Trace block offset in READ/WRITE data accessesPhilippe Mathieu-Daudé
Useful to detect out of bound accesses. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@redhat.com> Tested-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20240628070216.92609-5-philmd@linaro.org>
2024-07-02hw/sd/sdcard: Track last command used to help loggingPhilippe Mathieu-Daudé
The command is selected on the I/O lines, and further processing might be done on the DAT lines via the sd_read_byte() and sd_write_byte() handlers. Since these methods can't distinct between normal and APP commands, keep the name of the current command in the SDState and use it in the DAT handlers. This fixes a bug that all normal commands were displayed as APP commands. Fixes: 2ed61fb57b ("sdcard: Display command name when tracing CMD/ACMD") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20240628070216.92609-4-philmd@linaro.org>
2024-07-02hw/sd/sdcard: Deprecate support for spec v1.10Philippe Mathieu-Daudé
We use the v2.00 spec by default since commit 2f0939c234 ("sdcard: Add a 'spec_version' property, default to Spec v2.00"). Time to deprecate the v1.10 which doesn't bring much, and is not tested. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@redhat.com> Tested-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20240627071040.36190-2-philmd@linaro.org>
2024-07-01Merge tag 'pull-target-arm-20240701' of ↵Richard Henderson
https://git.linaro.org/people/pmaydell/qemu-arm into staging target-arm queue: * tests/avocado: update firmware for sbsa-ref and use all cores * hw/arm/smmu-common: Replace smmu_iommu_mr with smmu_find_sdev * arm: Fix VCMLA Dd, Dn, Dm[idx] * arm: Fix SQDMULH (by element) with Q=0 * arm: Fix FJCVTZS vs flush-to-zero * arm: More conversion of A64 AdvSIMD to decodetree * arm: Enable FEAT_Debugv8p8 for -cpu max * MAINTAINERS: Update family name for Patrick Leis * hw/arm/xilinx_zynq: Add boot-mode property * docs/system/arm: Add a doc for zynq board * hw/misc: In STM32L4x5 EXTI, correct configurable interrupts * tests/qtest: fix minor issues in STM32L4x5 tests # -----BEGIN PGP SIGNATURE----- # # iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmaC1BMZHHBldGVyLm1h # eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3nDOEACCoewjO2FJ4RFXMSmgr0Zf # jxWliu7osw7oeG4ZNq1+xMiXeW0vyS54eW41TMki1f98N/yK8v55BM8kBBvDvZaz # R5DUXpN+MtwD9A62md3B2c4mFXHqk1UOGbKi4btbtFj4lS8pV51mPmApzBUr2iTj # w6dCLciLOt87NWgtLECXsZ3evn+VlTRc+Hmfp1M/C/Rf2Qx3zis/CFHGQsZLGwzG # 2WhTpU1BKeOfsQa1VbSX6un14d72/JATFZN3rSgMbOEbvsCEeP+rnkzX57ejGyxV # 4DUx69gEAqS5bOfkQHLwy82WsunD/oIgp+GpYaYgINHzh6UkEsPoymrHAaPgV1Vh # g0TaBtbv2p89RFY1C2W2Mi4ICQ14a+oIV9FPvDsOE8Wq+wDAy/ZxZs7G6flxqods # s4JvcMqB3kUNBZaMsFVXTKdqT1PufICS+gx0VsKdKDwXcOHwMS10nTlEOPzqvoBA # phAsEbjnjWVhf03XTfCus+l5NT96lswCzPcUovb3CitSc2A1KUye3TyzHnxIqmOt # Owcl+Oiso++cgYzr/BCveTAYKYoRZzVcq5jCl4bBUH/8sLrRDbT0cpFpcMk72eE9 # VhR00kbkDfL3nKrulLsG8FeUlisX5+oGb3G5AdPtU9sqJPJMmBGaF+KniI0wi7VN # 5teHq08upLMF5JAjiKzZIA== # =faXD # -----END PGP SIGNATURE----- # gpg: Signature made Mon 01 Jul 2024 09:06:43 AM PDT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full] # gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown] * tag 'pull-target-arm-20240701' of https://git.linaro.org/people/pmaydell/qemu-arm: (29 commits) tests/qtest: Ensure STM32L4x5 EXTI state is correct at the end of QTests hw/misc: In STM32L4x5 EXTI, correct configurable interrupts tests/qtest: Fix STM32L4x5 SYSCFG irq line 15 state assumption docs/system/arm: Add a doc for zynq board hw/arm/xilinx_zynq: Add boot-mode property hw/misc/zynq_slcr: Add boot-mode property MAINTAINERS: Update my family name target/arm: Enable FEAT_Debugv8p8 for -cpu max target/arm: Move initialization of debug ID registers target/arm: Fix indentation target/arm: Delete dead code from disas_simd_indexed target/arm: Convert FCMLA to decodetree target/arm: Convert FCADD to decodetree target/arm: Add data argument to do_fp3_vector target/arm: Convert BFMMLA, SMMLA, UMMLA, USMMLA to decodetree target/arm: Convert BFMLALB, BFMLALT to decodetree target/arm: Convert BFDOT to decodetree target/arm: Convert SUDOT, USDOT to decodetree target/arm: Convert SDOT, UDOT to decodetree target/arm: Convert SQRDMLAH, SQRDMLSH to decodetree ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-07-01Merge tag 'pull-xen-20240701' of ↵Richard Henderson
https://xenbits.xen.org/git-http/people/aperard/qemu-dm into staging Xen queue: * Improvement for running QEMU in a stubdomain. * Improve handling of buffered ioreqs. # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCgAdFiEE+AwAYwjiLP2KkueYDPVXL9f7Va8FAmaCq2IACgkQDPVXL9f7 # Va9PHQf+N4SGAo8rD6Nw7z73b9/Qd20Pz82Pm3BLnJtioxxOhVPU33HJsyjkQRSs # dVckRZk6IFfiAKWTPDsQfeL+qDBjL15usuZCLeq7zRr5NwV5OOlSh6fW6yurY8IR # zHoCJTjYcaXbMCVIzAXhM19rZjFZCLNFYb3ADRvDANaxbhSx60EAg69S8gQeQhgw # BVC5inDxMGSl4X7i8eh+E39H8X1RKNg4GQyLWOVksdElQuKeGFMThaSCmA3OHkOV # Ny70+PrCM3Z1sbUMI3lDHdT4f9JXcYqJbnCjCDHCZgOeF2Z5UEfFlPiVQIo4OA7o # b48LbOuThEZew4SrJS9lx9RKafoFyw== # =oLvq # -----END PGP SIGNATURE----- # gpg: Signature made Mon 01 Jul 2024 06:13:06 AM PDT # gpg: using RSA key F80C006308E22CFD8A92E7980CF5572FD7FB55AF # gpg: Good signature from "Anthony PERARD <anthony.perard@gmail.com>" [undefined] # gpg: aka "Anthony PERARD <anthony.perard@citrix.com>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 5379 2F71 024C 600F 778A 7161 D8D5 7199 DF83 42C8 # Subkey fingerprint: F80C 0063 08E2 2CFD 8A92 E798 0CF5 572F D7FB 55AF * tag 'pull-xen-20240701' of https://xenbits.xen.org/git-http/people/aperard/qemu-dm: xen-hvm: Avoid livelock while handling buffered ioreqs xen: fix stubdom PCI addr hw/xen: detect when running inside stubdomain Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-07-01tests/qtest: Ensure STM32L4x5 EXTI state is correct at the end of QTestsInès Varhol
EXTI's new field `irq_levels` tracks irq levels between tests when using `global_qtest`. This happens in `stm32l4x5_exti-test.c`, `stm32l4x5_syscfg-test.c` and `stm32l4x5_gpio-test.c` (`dm163.c` doesn't use `global_qtest`). To ensure that `irq_levels` has the same value before and after each QTest, this commit toggles back the irq lines that were changed at the end of each problematic test. Most QTests were already doing this. Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240629110800.539969-3-ines.varhol@telecom-paris.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01hw/misc: In STM32L4x5 EXTI, correct configurable interruptsInès Varhol
The implementation of configurable interrupts (interrupts supporting edge selection) was incorrectly expecting alternating input levels : this commits adds a new status field `irq_levels` to actually detect edges. Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240629110800.539969-2-ines.varhol@telecom-paris.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01tests/qtest: Fix STM32L4x5 SYSCFG irq line 15 state assumptionInès Varhol
The QTest `test_irq_pin_multiplexer` makes the assumption that the reset state of irq line 15 is low, which is false since STM32L4x5 GPIO was implemented (the reset state of pin GPIOA15 is high because there's pull-up and it results in the irq line 15 also being high at reset). It wasn't triggering an error because `test_interrupt` was mistakenly "resetting" the line low. This commit corrects these two mistakes by : - not setting the line low in `test_interrupt` - using an irq line in `test_irq_pin_multiplexer` which is low at reset Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240629104454.366283-1-ines.varhol@telecom-paris.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01docs/system/arm: Add a doc for zynq boardSai Pavan Boddu
Added the supported device list and an example command. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20240621125906.1300995-4-sai.pavan.boddu@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01hw/arm/xilinx_zynq: Add boot-mode propertySai Pavan Boddu
Read boot-mode value as machine property and propagate that to SLCR.BOOT_MODE register. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com> Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20240621125906.1300995-3-sai.pavan.boddu@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01hw/misc/zynq_slcr: Add boot-mode propertySai Pavan Boddu
boot-mode property sets user values into BOOT_MODE register, on hardware these are derived from board switches. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20240621125906.1300995-2-sai.pavan.boddu@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01MAINTAINERS: Update my family namePatrick Leis
Signed-off-by: Patrick Leis <venture@google.com> Message-id: 20240626211623.3510701-1-venture@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01target/arm: Enable FEAT_Debugv8p8 for -cpu maxGustavo Romero
Enable FEAT_Debugv8p8 for max CPU. This feature is out of scope for QEMU since it concerns the external debug interface for JTAG, but is mandatory in Armv8.8 implementations, hence it is reported as supported in the ID registers. Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240624180915.4528-4-gustavo.romero@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01target/arm: Move initialization of debug ID registersGustavo Romero
Move the initialization of the debug ID registers to aa32_max_features, which is used to set the 32-bit ID registers. This ensures that the debug ID registers are consistently set for the max CPU in a single place. Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240624180915.4528-3-gustavo.romero@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01target/arm: Fix indentationGustavo Romero
Fix comment indentation adding a missing space. Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240624180915.4528-2-gustavo.romero@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01target/arm: Delete dead code from disas_simd_indexedRichard Henderson
MLA, MLS, SQDMULH, SQRDMULH, were converted with 8db93dcd3def and f80701cb44d, and this code should have been removed then. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240625183536.1672454-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01target/arm: Convert FCMLA to decodetreeRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240625183536.1672454-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01target/arm: Convert FCADD to decodetreeRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240625183536.1672454-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01target/arm: Add data argument to do_fp3_vectorRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240625183536.1672454-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01target/arm: Convert BFMMLA, SMMLA, UMMLA, USMMLA to decodetreeRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240625183536.1672454-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01target/arm: Convert BFMLALB, BFMLALT to decodetreeRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240625183536.1672454-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01target/arm: Convert BFDOT to decodetreeRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240625183536.1672454-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01target/arm: Convert SUDOT, USDOT to decodetreeRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240625183536.1672454-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01target/arm: Convert SDOT, UDOT to decodetreeRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240625183536.1672454-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01target/arm: Convert SQRDMLAH, SQRDMLSH to decodetreeRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240625183536.1672454-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01xen-hvm: Avoid livelock while handling buffered ioreqsRoss Lagerwall
A malicious or buggy guest may generated buffered ioreqs faster than QEMU can process them in handle_buffered_iopage(). The result is a livelock - QEMU continuously processes ioreqs on the main thread without iterating through the main loop which prevents handling other events, processing timers, etc. Without QEMU handling other events, it often results in the guest becoming unsable and makes it difficult to stop the source of buffered ioreqs. To avoid this, if we process a full page of buffered ioreqs, stop and reschedule an immediate timer to continue processing them. This lets QEMU go back to the main loop and catch up. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Paul Durrant <paul@xen.org> Message-Id: <20240404140833.1557953-1-ross.lagerwall@citrix.com> Signed-off-by: Anthony PERARD <anthony@xenproject.org>
2024-07-01xen: fix stubdom PCI addrMarek Marczykowski-Górecki
When running in a stubdomain, the config space access via sysfs needs to use BDF as seen inside stubdomain (connected via xen-pcifront), which is different from the real BDF. For other purposes (hypercall parameters etc), the real BDF needs to be used. Get the in-stubdomain BDF by looking up relevant PV PCI xenstore entries. Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <35049e99da634a74578a1ff2cb3ae4cc436ede33.1711506237.git-series.marmarek@invisiblethingslab.com> Signed-off-by: Anthony PERARD <anthony@xenproject.org>
2024-07-01hw/xen: detect when running inside stubdomainMarek Marczykowski-Górecki
Introduce global xen_is_stubdomain variable when qemu is running inside a stubdomain instead of dom0. This will be relevant for subsequent patches, as few things like accessing PCI config space need to be done differently. Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <e66aa97dca5120f22e015c19710b2ff04f525720.1711506237.git-series.marmarek@invisiblethingslab.com> Signed-off-by: Anthony PERARD <anthony@xenproject.org>
2024-07-01target/arm: Fix FJCVTZS vs flush-to-zeroRichard Henderson
Input denormals cause the Javascript inexact bit (output to Z) to be set. Cc: qemu-stable@nongnu.org Fixes: 6c1f6f2733a ("target/arm: Implement ARMv8.3-JSConv") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2375 Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240625183536.1672454-4-richard.henderson@linaro.org [PMM: fixed hardcoded tab in test case] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01target/arm: Fix SQDMULH (by element) with Q=0Richard Henderson
The inner loop, bounded by eltspersegment, must not be larger than the outer loop, bounded by elements. Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240625183536.1672454-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01target/arm: Fix VCMLA Dd, Dn, Dm[idx]Richard Henderson
The inner loop, bounded by eltspersegment, must not be larger than the outer loop, bounded by elements. Cc: qemu-stable@nongnu.org Fixes: 18fc2405781 ("target/arm: Implement SVE fp complex multiply add (indexed)") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2376 Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240625183536.1672454-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01hw/arm/smmu-common: Replace smmu_iommu_mr with smmu_find_sdevNicolin Chen
The caller of smmu_iommu_mr wants to get sdev for smmuv3_flush_config(). Do it directly instead of bridging with an iommu mr pointer. Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Message-id: 20240619002218.926674-1-nicolinc@nvidia.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01tests/avocado: use default amount of cores on sbsa-refMarcin Juszkiewicz
The version of the sbsa-ref EDK2 firmware we used to use in this test had a bug where it might make an unaligned access to the framebuffer, which causes a guest crash on newer versions of QEMU where we enforce the architectural requirement that unaligned accesses to Device memory should take an exception. We happened to not notice this because our test was booting with "-smp 1" and through luck this didn't write the boot logo to the framebuffer at an unaligned address; but trying to boot the same firmware with two CPUs would result in a guest crash. Now we have updated the firmware we're using for the test, we can make the test use all the cores on the board, so we are testing the SMP boot path. Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240620-b4-new-firmware-v3-2-29a3a2f1be1e@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01tests/avocado: update firmware for sbsa-refMarcin Juszkiewicz
Update firmware to have graphics card memory fix from EDK2 commit c1d1910be6e04a8b1a73090cf2881fb698947a6e: OvmfPkg/QemuVideoDxe: add feature PCD to remap framebuffer W/C Some platforms (such as SBSA-QEMU on recent builds of the emulator) only tolerate misaligned accesses to normal memory, and raise alignment faults on such accesses to device memory, which is the default for PCIe MMIO BARs. When emulating a PCIe graphics controller, the framebuffer is typically exposed via a MMIO BAR, while the disposition of the region is closer to memory (no side effects on reads or writes, except for the changing picture on the screen; direct random access to any pixel in the image). In order to permit the use of such controllers on platforms that only tolerate these types of accesses for normal memory, it is necessary to remap the memory. Use the DXE services to set the desired capabilities and attributes. Hide this behavior under a feature PCD so only platforms that really need it can enable it. (OVMF on x86 has no need for this) With this fix enabled we can boot sbsa-ref with more than one cpu core. Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240620-b4-new-firmware-v3-1-29a3a2f1be1e@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01hw/misc: Implement mailbox properties for customer OTP and device specific ↵Rayhan Faizel
private keys Four mailbox properties are implemented as follows: 1. Customer OTP: GET_CUSTOMER_OTP and SET_CUSTOMER_OTP 2. Device-specific private key: GET_PRIVATE_KEY and SET_PRIVATE_KEY. The customer OTP is located in the rows 36-43. The device-specific private key is located in the rows 56-63. The customer OTP can be locked with the magic numbers 0xffffffff 0xaffe0000 when running the SET_CUSTOMER_OTP mailbox command. Bit 6 of row 32 indicates this lock, which is undocumented. The lock also applies to the device-specific private key. Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01hw/arm: Connect OTP device to BCM2835Rayhan Faizel
Replace stubbed OTP memory region with the new OTP device. Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01hw/nvram: Add BCM2835 OTP deviceRayhan Faizel
The OTP device registers are currently stubbed. For now, the device houses the OTP rows which will be accessed directly by other peripherals. Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-06-30Merge tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu into stagingRichard Henderson
trivial patches for 2024-06-30 # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCAAdFiEEe3O61ovnosKJMUsicBtPaxppPlkFAmaBjTkACgkQcBtPaxpp # PlmhAAf+PZEsiBvffwwNH5n1q39Hilih35p/GCVpNYKcLsFB6bLmt9A/x062NqTS # ob1Uj134ofHlSQtNjP1KxXdriwc40ZMahkTO+x6gYc+IpoRJGTGYEA0MWh4gPPYK # S6l/nOI9JK1x+ot+bQzGOzOjz3/S7RJteXzwOPlWQ7GChz8NIUPWV3DkcVP0AeT0 # 7Lq7GtDBSV5Jbne2IrvOGadjPOpJiiLEmLawmw1c9qapIKAu2wxNBMlO98ufsg6L # hDFEg6K0CKvM9fcdK8UXhnMa+58QwHhoJT+Q00aQcU1xzu+ifi/CrmgbRCK5ruTA # o0I8q6ONbK33cTzyZ/ZmKtoA8b/Rzw== # =N3GX # -----END PGP SIGNATURE----- # gpg: Signature made Sun 30 Jun 2024 09:52:09 AM PDT # gpg: using RSA key 7B73BAD68BE7A2C289314B22701B4F6B1A693E59 # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" [full] # gpg: aka "Michael Tokarev <mjt@debian.org>" [full] # gpg: aka "Michael Tokarev <mjt@corpit.ru>" [full] * tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu: hw/core/loader: gunzip(): fix memory leak on error path vl.c: select_machine(): add selected machine type to error message vl.c: select_machine(): use g_autoptr vl.c: select_machine(): use ERRP_GUARD instead of error propagation docs/system/devices/usb: Replace the non-existing "qemu" binary docs/cxl: fix some typos os-posix: Expand setrlimit() syscall compatibility net/can: Remove unused struct 'CanBusState' hw/arm/bcm2836: Remove unusued struct 'BCM283XClass' linux-user: sparc: Remove unused struct 'target_mc_fq' linux-user: cris: Remove unused struct 'rt_signal_frame' monitor: Remove obsolete stubs target/i386: Advertise MWAIT iff host supports vl: Allow multiple -overcommit commands cpu: fix memleak of 'halt_cond' and 'thread' hmp-commands-info.hx: Add missing info command for stats subcommand Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-06-30Merge tag 'pull-ufs-20240630' of https://gitlab.com/jeuk20.kim/qemu into stagingRichard Henderson
hw/ufs: fix coverity issue # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCgAdFiEEUBfYMVl8eKPZB+73EuIgTA5dtgIFAmaA1MQACgkQEuIgTA5d # tgIYSBAAul4qW0P6q0h3Dj/MLcGMPo4Y4kcWKe2AAkE/mBRvKbE7bLsA0y47WU5S # MJJApw4lwCsM12ZcD0W3YNbNwGUclQAVhLU5TOMowwaEWjNwmcsBR+AVwya4M2jQ # zSw6udIo5dfdy6KSe2EbRAuoDqBFJrcIH6EbXn/pBIhotlFzyUYYcpPBAq3rwh+V # haEtt3DapAektx+QkswBNEWu002OHyNDQXqfHnFvNMAYN9T25Nr+REai3VhZj379 # F/p5bFxou9FnwuGXRrpS1Em1jT+gRJnYoxp6iML8Zb4eZLhFs7T3WWkXHhbq7Nbt # oeg1CFdQeIt1iowk/dhtnSEQqnLe9dfPHj7pxU98dkYXHcN52Q5CRb+c0JnEyBLc # lGIjLVWvqYitOwGmvIdSmStd5TCLtuYmQGaI3slZCvsJTSo4Tkx3eI504NTVQ4K2 # lNY0jb+0PIsEUlyssimlsDA0SCkbpe5yE1G2NDCP74MjG0mlUm/h/OU0etk7uhwv # DNr1Lljr04FhcgVbMGX5sbMeK2QiCDuOlCF1T4zkzDFdWKIl414vH1wvjv1cBKlj # RdAfAi8zIV5lOeSqX13E9B0tjwUALlWFApW8J7pefijSBOGxEfFQJ39Gd4eIEFgD # Bj9Nc1ddDs30YaCZSMYsqcHU09srlobWmPqadba6hyJW4L1B9bU= # =d0WA # -----END PGP SIGNATURE----- # gpg: Signature made Sat 29 Jun 2024 08:45:08 PM PDT # gpg: using RSA key 5017D831597C78A3D907EEF712E2204C0E5DB602 # gpg: Good signature from "Jeuk Kim <jeuk20.kim@samsung.com>" [unknown] # gpg: aka "Jeuk Kim <jeuk20.kim@gmail.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 5017 D831 597C 78A3 D907 EEF7 12E2 204C 0E5D B602 * tag 'pull-ufs-20240630' of https://gitlab.com/jeuk20.kim/qemu: hw/ufs: Fix potential bugs in MMIO read|write Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-06-30hw/core/loader: gunzip(): fix memory leak on error pathVladimir Sementsov-Ogievskiy
We should call inflateEnd() like on success path to cleanup state in s variable. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-06-30vl.c: select_machine(): add selected machine type to error messageVladimir Sementsov-Ogievskiy
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-06-30vl.c: select_machine(): use g_autoptrVladimir Sementsov-Ogievskiy
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-06-30vl.c: select_machine(): use ERRP_GUARD instead of error propagationVladimir Sementsov-Ogievskiy
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-06-30docs/system/devices/usb: Replace the non-existing "qemu" binaryThomas Huth
We don't ship a binary that is simply called "qemu", so we should avoid this in the documentation. Use the configurable binary name via "|qemu_system|" instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-27 08:12:36 +0000