aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-05-04monitor: Move hmp_savevm from savevm.c to hmp.cJuan Quintela
It is a monitor command, and has nothing migration specific in it. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-04monitor: Move hmp_loadvm from monitor.c to hmp.cJuan Quintela
We are going to move the rest of hmp snapshots functions there instead of monitor.c. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-04monitor: Remove monitor parameter from save_vmstateJuan Quintela
load_vmstate() already use error_report, so be consistent. There is an identical error message in load_vmstate() that ends in a period. Remove it. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-04migration: to_dst_file at that point is NULLJuan Quintela
We have just arrived as: migration.c: qemu_migrate() .... s = migrate_init() <- puts it to NULL .... {tcp,unix}_start_outgoing_migration -> socket_outgoing_migration migration_channel_connect() sets to_dst_file if tls is enabled, we do another round through migrate_channel_tls_connect(), but we only set it up if there is no error. So we don't need the assignation. I am removing it to remove in the follwing patches the knowledge about MigrationState in that two files. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-05-04migration: setup bi-directional I/O channel for exec: protocolDaniel P. Berrange
Historically the migration data channel has only needed to be unidirectional. Thus the 'exec:' protocol was requesting an I/O channel with O_RDONLY on incoming side, and O_WRONLY on the outgoing side. This is fine for classic migration, but if you then try to run TLS over it, this fails because the TLS handshake requires a bi-directional channel. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-05-04ram: Split dirty bitmap by RAMBlockJuan Quintela
Both the ram bitmap and the unsent bitmap are split by RAMBlock. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Peter Xu <peterx@redhat.com> -- Fix compilation when DEBUG_POSTCOPY is enabled (thanks Hailiang)
2017-05-02Merge remote-tracking branch 'sthibault/tags/samuel-thibault' into stagingStefan Hajnoczi
slirp updates # gpg: Signature made Sat 29 Apr 2017 05:45:24 PM BST # gpg: using RSA key 0xB0A51BF58C9179C5 # gpg: Good signature from "Samuel Thibault <samuel.thibault@aquilenet.fr>" # gpg: aka "Samuel Thibault <sthibault@debian.org>" # gpg: aka "Samuel Thibault <samuel.thibault@gnu.org>" # gpg: aka "Samuel Thibault <samuel.thibault@inria.fr>" # gpg: aka "Samuel Thibault <samuel.thibault@labri.fr>" # gpg: aka "Samuel Thibault <samuel.thibault@ens-lyon.org>" # gpg: aka "Samuel Thibault <samuel.thibault@u-bordeaux.fr>" # Primary key fingerprint: 900C B024 B679 31D4 0F82 304B D017 8C76 7D06 9EE6 # Subkey fingerprint: AEBF 7448 FAB9 453A 4552 390E B0A5 1BF5 8C91 79C5 * sthibault/tags/samuel-thibault: slirp: VMStatify remaining except for loop slirp: VMStatify socket level slirp: Common lhost/fhost union slirp: VMStatify sbuf slirp: VMState conversion; tcpcb slirp: fix pinging the virtual ipv4 DNS server slirp: tftp, copy sockaddr_size slirp/smb: Replace constant strings by glib string slirp: allow host port 0 for hostfwd Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-04-29slirp: VMStatify remaining except for loopDr. David Alan Gilbert
This converts the remaining components, except for the top level loop, to VMState. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-29slirp: VMStatify socket levelDr. David Alan Gilbert
Working up the stack, this replaces the slirp_socket_load/save with VMState definitions. A place holder for IPv6 support is added as a comment; it needs testing once the rest of the IPv6 code is there. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-29slirp: Common lhost/fhost unionDr. David Alan Gilbert
The socket structure has a pair of unions for lhost and fhost addresses; the unions are identical so split them out into a separate union declaration. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-29slirp: VMStatify sbufDr. David Alan Gilbert
Convert the sbuf structure to a VMStateDescription. Note this uses the VMSTATE_WITH_TMP mechanism to calculate and reload the offsets based on the pointers. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-29slirp: VMState conversion; tcpcbDr. David Alan Gilbert
Convert the migration of the struct tcpcb to use a VMStateDescription, the rest of it will come later. Mostly mechanical, except for conversion of some 'char' to uint8_t to ensure portability. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-29slirp: fix pinging the virtual ipv4 DNS serverSamuel Thibault
so that people do not think it is not working at least basically. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-29slirp: tftp, copy sockaddr_sizeMarc-André Lureau
ASAN detects an "unknown-crash" when running pxe-test: /ppc64/pxe/spapr-vlan: ================================================================= ==7143==ERROR: AddressSanitizer: unknown-crash on address 0x7f6dcd298d30 at pc 0x55e22218830d bp 0x7f6dcd2989e0 sp 0x7f6dcd2989d0 READ of size 128 at 0x7f6dcd298d30 thread T2 #0 0x55e22218830c in tftp_session_allocate /home/elmarco/src/qq/slirp/tftp.c:73 #1 0x55e22218a1f8 in tftp_handle_rrq /home/elmarco/src/qq/slirp/tftp.c:289 #2 0x55e22218b54c in tftp_input /home/elmarco/src/qq/slirp/tftp.c:446 #3 0x55e2221833fe in udp6_input /home/elmarco/src/qq/slirp/udp6.c:82 #4 0x55e222137b17 in ip6_input /home/elmarco/src/qq/slirp/ip6_input.c:67 Address 0x7f6dcd298d30 is located in stack of thread T2 at offset 96 in frame #0 0x55e222182420 in udp6_input /home/elmarco/src/qq/slirp/udp6.c:13 This frame has 3 object(s): [32, 48) '<unknown>' [96, 124) 'lhost' <== Memory access at offset 96 partially overflows this variable [160, 200) 'save_ip' <== Memory access at offset 96 partially underflows this variable The sockaddr_storage pointer is the sockaddr_in6 lhost on the stack. Copy only the source addr size. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-29slirp/smb: Replace constant strings by glib stringDr. David Alan Gilbert
gcc 7 (on fedora 26) objects to many of the snprintf's in the smb path and command creation because it can't figure out that the smb_dir (i.e. the /tmp dir for the configuration) is known to be short. Replace all these fixed length buffers by g_str* functions that dynamically allocate and use g_dir_make_tmp to make the directory. (It's fairly new glib but we have a compat function for it). Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-29slirp: allow host port 0 for hostfwdVincent Bernat
The OS will allocate automatically a free port. This is useful if you want to be sure to not get any port conflict. You still have to figure out which port you got, for example with "lsof" (this could be exposed in the monitor if needed). Example of use: $ qemu-system-x86_64 -net user,hostfwd=127.0.0.1:0-:22 ... Then, get your port with: $ lsof -np 1474 | grep LISTEN qemu-syst 31777 bernat 12u IPv4 [...] TCP 127.0.0.1:35145 (LISTEN) Signed-off-by: Vincent Bernat <vincent@bernat.im> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-28replication: Make --disable-replication compile againMarkus Armbruster
Broken in commit daa33c5. Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Message-id: 1493298053-17140-1-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-04-28configure: fix trace backend list for out-of-tree buildsGreg Kurz
Since commit "c53eeaf75a04 configure: eliminate Python dependency for --help", configure --help fails to produce the list of available trace backends if invoked out-of-tree. It also spits the following error: grep: scripts/tracetool/backend/*.py: No such file or directory This patch simply adds the missing $source_path to fix it. Signed-off-by: Greg Kurz <groug@kaod.org> Message-id: 149321376763.7874.12797658801011614451.stgit@bahia Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-04-28Merge remote-tracking branch 'mdroth/tags/qga-pull-2017-04-25-v2-tag' into ↵Stefan Hajnoczi
staging qemu-ga patch queue * new commands: guest-get-timezone, guest-get-users, guest-get-host-name * fix hang on w32 when stopping qemu-ga service while fs frozen * fix missing setting of can-offline in guest-get-vcpus * make qemu-ga VSS w32 service on-demand rather than on-startup * fix unecessary errors to EventLog on w32 * improvements to fsfreeze documentation v2: * document 'zone' field of guest-get-timezone as informational-only (Daniel, Eric) * fix build error for glib < 2.32 (Peter) # gpg: Signature made Thu 27 Apr 2017 06:43:42 AM BST # gpg: using RSA key 0x3353C9CEF108B584 # gpg: Good signature from "Michael Roth <flukshun@gmail.com>" # gpg: aka "Michael Roth <mdroth@utexas.edu>" # gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>" # Primary key fingerprint: CEAC C9E1 5534 EBAB B82D 3FA0 3353 C9CE F108 B584 * mdroth/tags/qga-pull-2017-04-25-v2-tag: qga: Add `guest-get-timezone` command qga: Add 'guest-get-users' command qga: improve fsfreeze documentations qga: Add 'guest-get-host-name' command qga-win: Fix Event Viewer errors caused by qemu-ga qga-win: Fix a bug where qemu-ga service is stuck during stop operation qga-win: Enable 'can-offline' field in 'guest-get-vcpus' reply qemu-ga: Make QGA VSS provider service run only when needed Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-04-27qga: Add `guest-get-timezone` commandVinzenz Feenstra
Adds a new command `guest-get-timezone` reporting the currently configured timezone on the system. The information on what timezone is currently is configured is useful in case of Windows VMs where the offset of the hardware clock is required to have the same offset. This can be used for management systems like `oVirt` to detect the timezone difference and warn administrators of the misconfiguration. Signed-off-by: Vinzenz Feenstra <vfeenstr@redhat.com> Reviewed-by: Sameeh Jubran <sameeh@daynix.com> Tested-by: Sameeh Jubran <sameeh@daynix.com> * moved stub implementation to end of function for consistency * document that timezone names are for informational use only. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-04-26qga: Add 'guest-get-users' commandVinzenz Feenstra
A command that will list all currently logged in users, and the time since when they are logged in. Examples: virsh # qemu-agent-command F25 '{ "execute": "guest-get-users" }' {"return":[{"login-time":1490622289.903835,"user":"root"}]} virsh # qemu-agent-command Win2k12r2 '{ "execute": "guest-get-users" }' {"return":[{"login-time":1490351044.670552,"domain":"LADIDA", "user":"Administrator"}]} Signed-off-by: Vinzenz Feenstra <vfeenstr@redhat.com> * make g_hash_table_contains compat func inline to avoid unused warnings Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-04-26qga: improve fsfreeze documentationsMarc-André Lureau
Some users find the fsfreeze behaviour confusing. Add some notes about invalid mount points and Windows usage. Related to: https://bugzilla.redhat.com/show_bug.cgi?id=1436976 Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Vinzenz Feenstra <vfeenstr@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-04-26qga: Add 'guest-get-host-name' commandVinzenz Feenstra
Retrieving the guest host name is a very useful feature for virtual management systems. This information can help to have more user friendly VM access details, instead of an IP there would be the host name. Also the host name reported can be used to have automated checks for valid SSL certificates. virsh # qemu-agent-command F25 '{ "execute": "guest-get-host-name" }' {"return":{"host-name":"F25.lab.evilissimo.net"}} Signed-off-by: Vinzenz Feenstra <vfeenstr@redhat.com> * minor whitespace fix-ups Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-04-26qga-win: Fix Event Viewer errors caused by qemu-gaSameeh Jubran
When the command "guest-fsfreeze-freeze" is executed it causes the VSS service to log the error below in the Event Viewer. This error is caused by an issue in the function "CommitSnapshots" in provider.cpp: * When VSS_TIMEOUT_MSEC expires the funtion returns E_ABORT. This causes the error #12293. |event id| error | * 12293 : Volume Shadow Copy Service error: Error calling a routine on a Shadow Copy Provider {00000000-0000-0000-0000-000000000000}. Routine details CommitSnapshots [hr = 0x80004004, Operation aborted. Signed-off-by: Sameeh Jubran <sameeh@daynix.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-04-26qga-win: Fix a bug where qemu-ga service is stuck during stop operationSameeh Jubran
After triggering a freeze command without any following thaw command, qemu-ga will not respond to stop operation. This behaviour is wanted on Linux as there is no time limit for a freeze command and we want to prevent quitting in the middle of freeze, on the other hand on Windows the time limit for freeze is 10 seconds, so we should wait for the timeout, thaw the file system and quit. Signed-off-by: Sameeh Jubran <sameeh@daynix.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-04-26qga-win: Enable 'can-offline' field in 'guest-get-vcpus' replySameeh Jubran
The QGA schema states: @can-offline: Whether offlining the VCPU is possible. This member is always filled in by the guest agent when the structure is returned, and always ignored on input (hence it can be omitted then). Currently 'can-offline' is missing entirely from the reply. This causes errors in libvirt which is expecting the reply to be compliant with the schema docs. BZ#1438735: https://bugzilla.redhat.com/show_bug.cgi?id=1438735 Signed-off-by: Sameeh Jubran <sameeh@daynix.com> Reviewed-by: Eric Blake <eblake@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-04-26qemu-ga: Make QGA VSS provider service run only when neededSameeh Jubran
Currently the service runs in background on boot even though it is not needed and once it is running it never stops. The service needs to be running only during freeze operation and it should be stopped after executing thaw. Signed-off-by: Sameeh Jubran <sameeh@daynix.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-04-26Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20170426' into stagingPeter Maydell
Fix for exit_atomic tcg opcode paths # gpg: Signature made Wed 26 Apr 2017 18:27:11 BST # gpg: using RSA key 0xAD1270CC4DD0279B # gpg: Good signature from "Richard Henderson <rth7680@gmail.com>" # gpg: aka "Richard Henderson <rth@redhat.com>" # gpg: aka "Richard Henderson <rth@twiddle.net>" # Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC 16A4 AD12 70CC 4DD0 279B * remotes/rth/tags/pull-tcg-20170426: tcg: Initialize return value after exit_atomic Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-26tcg: Initialize return value after exit_atomicRichard Henderson
Users of tcg_gen_atomic_cmpxchg and do_atomic_op rightfully utilize the output. Even though this code is dead, it gets translated, and without the initialization we encounter a tcg_error. Reported-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Tested-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Tested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-04-26Revert "COLO-compare: Optimize tcp compare trace event"Peter Maydell
This reverts commit 0fc8aec7de64f2bf83a274a2a38b938ce03425d2. In commit 2dfe5113b11 we split a trace event with a lot of arguments in two, because the UST trace backend has a limit on the number of arguments you can have in a single trace event. Unfortunately we subsequently forgot about this, and in commit 0fc8aec7de64f2 we merged the two trace events again, recreating the "UST backend doesn't build" bug. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-26Merge remote-tracking branch 'remotes/dgilbert/tags/pull-hmp-20170426' into ↵Peter Maydell
staging HMP pull, with tcg fix # gpg: Signature made Wed 26 Apr 2017 14:55:30 BST # gpg: using RSA key 0x0516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-hmp-20170426: tests: Add a tester for HMP commands libqtest: Add a generic function to run a callback function for every machine libqtest: Ignore QMP events when parsing the response for HMP commands monitor: Check whether TCG is enabled before running the "info jit" code hmp: gpa2hva and gpa2hpa hostaddr command Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-26tests: Add a tester for HMP commandsThomas Huth
HMP commands do not get any automatic testing yet, so on certain QEMU machines, some HMP commands were causing crashes in the past. Thus we should test HMP commands in our test suite, too, to avoid that such problems creep in again in the future. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1493097407-20482-1-git-send-email-thuth@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-26libqtest: Add a generic function to run a callback function for every machineThomas Huth
Some tests need to run single tests for every available machine of the current QEMU binary. To avoid code duplication, let's extract this code that deals with 'query-machines' into a separate function. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1490860207-8302-3-git-send-email-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-26libqtest: Ignore QMP events when parsing the response for HMP commandsThomas Huth
When running certain HMP commands (like "device_del") via QMP, we can sometimes get a QMP event in the response first, so that the "g_assert(ret)" statement in qtest_hmp() triggers and the test fails. Fix this by ignoring such QMP events while looking for the real return value from QMP. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1490860207-8302-2-git-send-email-thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Added note to qtest_hmp/qtest_hmpv's header description to say it discards events
2017-04-26monitor: Check whether TCG is enabled before running the "info jit" codeThomas Huth
The "info jit" command currently aborts on Mac OS X with the message "qemu_mutex_lock: Invalid argument" when running with "-M accel=qtest". We should only call into the TCG code here if TCG has really been enabled and initialized. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1493179907-22516-1-git-send-email-thuth@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Tested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-26hmp: gpa2hva and gpa2hpa hostaddr commandPaolo Bonzini
These commands are useful when testing machine-check passthrough. gpa2hva is useful to inject a MADV_HWPOISON madvise from gdb, while gpa2hpa is useful to inject an error with the mce-inject kernel module. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1490021158-4469-1-git-send-email-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20170420133058.12911-1-pbonzini@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-26Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-20170426' ↵Peter Maydell
into staging ppc patch queue 2017-04-26 Here's a respind of my first pull request for qemu-2.10, consisting of assorted patches which have accumulated while qemu-2.9 stabilized. Highlights are: * Rework / cleanup of the XICS interrupt controller * Substantial improvement to the 'powernv' machine type - Includes an MMIO XICS version * POWER9 support improvements - POWER9 guests with KVM - Partial support for POWER9 guests with TCG * IOMMU and VFIO improvements * Assorted minor changes There are several IPMI patches here that aren't usually in my area of maintenance, but there isn't a regular maintainer and these patches are for the benefit of the powernv machine type. This pull request supersedes my 2017-04-26 pull request. This new set fixes a bug in one of the aforementioned IPMI patches which caused clang sanitizer failures (and may have crashed on some libc / host versions). # gpg: Signature made Wed 26 Apr 2017 07:58:10 BST # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.10-20170426: (48 commits) MAINTAINERS: Remove myself from e500 target/ppc: Style fixes e500,book3s: mfspr 259: Register mapped/aliased SPRG3 user read target/ppc: Flush TLB on write to PIDR spapr-cpu-core: Release ICPState object during CPU unrealization ppc/pnv: generate an OEM SEL event on shutdown ppc/pnv: add initial IPMI sensors for the BMC simulator ppc/pnv: populate device tree for IPMI BT devices ppc/pnv: populate device tree for serial devices ppc/pnv: populate device tree for RTC devices ppc/pnv: scan ISA bus to populate device tree ppc/pnv: enable only one LPC bus ppc/pnv: Add support for POWER8+ LPC Controller spapr: remove the 'nr_servers' field from the machine target/ppc: Fix size of struct PPCElfPrstatus ipmi: introduce an ipmi_bmc_gen_event() API ipmi: introduce an ipmi_bmc_sdr_find() API ipmi: provide support for FRUs ipmi: use a file to load SDRs ppc: add IPMI support ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-26Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20170421-v2-tag' ↵Peter Maydell
into staging Xen 2017/04/21 + fix # gpg: Signature made Tue 25 Apr 2017 19:10:37 BST # gpg: using RSA key 0x894F8F4870E1AE90 # gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" # gpg: aka "Stefano Stabellini <sstabellini@kernel.org>" # Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90 * remotes/sstabellini/tags/xen-20170421-v2-tag: (21 commits) move xen-mapcache.c to hw/i386/xen/ move xen-hvm.c to hw/i386/xen/ move xen-common.c to hw/xen/ add xen-9p-backend to MAINTAINERS under Xen xen/9pfs: build and register Xen 9pfs backend xen/9pfs: send responses back to the frontend xen/9pfs: implement in/out_iov_from_pdu and vmarshal/vunmarshal xen/9pfs: receive requests from the frontend xen/9pfs: connect to the frontend xen/9pfs: introduce Xen 9pfs backend 9p: introduce a type for the 9p header xen: import ring.h from xen configure: use pkg-config for obtaining xen version xen: additionally restrict xenforeignmemory operations xen: use libxendevice model to restrict operations xen: use 5 digit xen versions xen: use libxendevicemodel when available configure: detect presence of libxendevicemodel xen: create wrappers for all other uses of xc_hvm_XXX() functions xen: rename xen_modified_memory() to xen_hvm_modified_memory() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-26MAINTAINERS: Remove myself from e500Scott Wood
I recently left Freescale/NXP, and even before that it'd been a few years since I was actively involved in KVM/QEMU work. Signed-off-by: Scott Wood <oss@buserror.net> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26target/ppc: Style fixesDavid Gibson
This makes a small step fixing one of many style problems that exist in the older ppc code. This removes spaces between function (or macro) name and the following '('. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26e500,book3s: mfspr 259: Register mapped/aliased SPRG3 user readBernhard Kaindl
This patch registers mfspr 259 for Book3S and e500 family cores following this research: mfspr 259 provides read-only mapped user access to SPRG3(SPR 275) according to: - PowerISA 2.02, Book III (documents implementation starting with POWER4+ @ p20) - IBM PowerPC 970MP RISC Microprocessor User's Manual v2.1, page 48 - Amit Singh: "Mac OS X Internals: A Systems Approach" on 970 and 970FX cores: He demonstrates mfspr 259 reading TLS data from Mac OS X on G5 on page 588 - NXP documents it in the Core Reference Manuals of: e500, e500mc and e5500 - getcpu() of the 32 & 64-bit Book3S Linux vDSOs use it to read the core number mfspr 259 does not appear to be implemented in these cores according to: - 74xx series: MPC7410/MPC7400 and MPC7450 RISC Microprocessor Reference Manuals - 4xx series: PPC440 Processor User's Manual, Revision 1.09 by AMCC - 750 series: IBM PowerPC 750CL RISC Microprocessor User's Manual - e200 series: e200z4 Power Architectureâ Core Reference Manual Implementation: gen_spr_usprg3() is called from init_proc_book3s_common() (covers the 970 and POWER cores) and init_proc_e500() (covers the e500 family) to register spr_read_ureg() in the same way which it already provides the mapped SPR access for SPR_USPRG4-7 in gen_spr_usprgh() for cores which have the same read-only mapped SPRG register access for SPRG4-7. Verified using Linux by pinning a thread to a core and checking sched_getcpu() using qemu-system-ppc64 -M pseries -cpu POWER8 using MTTCG on a x86_64 host. Signed-off-by: Bernhard Kaindl <bernhard.kaindl@thalesgroup.com> Reviewed-by: Stefan Resch <stefan.resch@thalesgroup.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26target/ppc: Flush TLB on write to PIDRSuraj Jitindar Singh
The PIDR (process id register) is used to store the id of the currently running process, which is used to select the process table entry used to perform address translation. This means that when we write to this register all the translations in the TLB become outdated as they are for a previously running process. Thus when this register is written to we need to invalidate the TLB entries to ensure stale entries aren't used to to perform translation for the new process, which would result in at best segfaults or alternatively just random memory being accessed. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [dwg: Fixed compile error for 32-bit targets] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26spapr-cpu-core: Release ICPState object during CPU unrealizationBharata B Rao
Recent commits that re-organized ICPState object missed to destroy the object when CPU is unrealized. Fix this so that CPU unplug doesn't abort QEMU. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26ppc/pnv: generate an OEM SEL event on shutdownCédric Le Goater
OpenPOWER systems expect to be notified with such an event before a shutdown or a reboot. An OEM SEL message is sent with specific identifiers and a user data containing the request : OFF or REBOOT. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26ppc/pnv: add initial IPMI sensors for the BMC simulatorCédric Le Goater
Skiboot, the firmware for the PowerNV platform, expects the BMC to provide some specific IPMI sensors. These sensors are exposed in the device tree and their values are updated by the firmware at boot time. Sensors of interest are : "FW Boot Progress" "Boot Count" As such a device is defined on the command line, we can only detect its presence at reset time. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26ppc/pnv: populate device tree for IPMI BT devicesCédric Le Goater
When an ipmi-bt device [1] is defined on the ISA bus, we need to populate the device tree with the object properties. Such devices are created with the command line options : -device ipmi-bmc-sim,id=bmc0 -device isa-ipmi-bt,bmc=bmc0,irq=10 [1] https://lists.gnu.org/archive/html/qemu-devel/2015-11/msg03168.html Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26ppc/pnv: populate device tree for serial devicesCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26ppc/pnv: populate device tree for RTC devicesCédric Le Goater
The code could be common to any ISA device but we are missing the IO length. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26ppc/pnv: scan ISA bus to populate device treeCédric Le Goater
This is an empty shell that we will use to include nodes in the device tree for ISA devices. We expect RTC, UART and IPMI BT devices. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26ppc/pnv: enable only one LPC busCédric Le Goater
The default LPC bus of a multichip system is on chip 0. It's recognized by the firmware (skiboot) using a "primary" property in the device tree. We introduce a pnv_chip_lpc_offset() routine to locate the LPC node of a chip and set the property directly from the machine level. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-23 16:38:00 +0000