aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-10-19pcie: add pcie constants to pcie_regs.hIsaku Yamahata
add pcie constants to pcie_regs.h. Those constants should go to Linux pci_regs.h and then the file should go away eventually. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-19msi: implements msiIsaku Yamahata
implements msi related functions. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-19pci: use pci_word_test_and_clear_mask() in pci_device_reset()Isaku Yamahata
use pci_clear_bit_word() in pci_device_reset() where appropriate. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-19pci: introduce helper function to handle msi-x and msi.Isaku Yamahata
this patch implements helper functions to handle msi-x and msi uniformly. They will be used later. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-19pci: introduce helper functions to test-and-{clear, set} mask in ↵Isaku Yamahata
configuration space This patch introduces helper functions to test-and-{clear, set} mask in configuration space. pci_{byte, word, long, quad}_test_and_{clear, set}_mask(). They will be used later. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-18pci: make pci_del_capability() update for w1cmaskIsaku Yamahata
Clear w1cmask when deleting a pci capability. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-20msix: clear not only INTA, but all INTx when MSI-X is enabled.Isaku Yamahata
clear not only INTA, but all INTx when MSI-X is enabled. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-20pci: implement RW1C register framework.Isaku Yamahata
Implement RW1C register framework. With this patch, it would be easy to implement W1C(Write 1 to Clear) register by just setting w1cmask. Later RW1C register will be used by pcie. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-13pci: improve signature of pci_register_bar().Isaku Yamahata
Make type uint8_t from int because PCIIORegion::type is uint8_t. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2010-09-13pci: don't ignore invalid parameter for pci_register_bar().Isaku Yamahata
Abort when invalid value for region_num is passed to pci_register_bar. That is caller's bug. Abort instead of silently ignoring invalid value. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-13pci: sorting out type confusion in pci_register_bar().Isaku Yamahata
This patch sorts out invalid use of pcibus_t. In pci_register_bar(), pcibus_t wmask is used. It should, however, be uint64_t because it is used to set pci configuration space value(PCIDevice::wmask) by pci_set_quad() or pci_set_long(). Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-13pci_ids.h: add vendor id of Texas IntesrumentsIsaku Yamahata
add vendor id of Texas Intesruments. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-07pci: make pci_parse_devfn() aware of func.Isaku Yamahata
make pci_parse_devfn() aware of func. With func = NULL it behave as before. This will be used later. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-07pci: call hotplug callback even when not hotplug case for later use.Isaku Yamahata
call hotplug callback even when not hotplug case for later use. And move hotplug check into hotplug callback. PCIE slot needs this for card presence detection. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-07pci bridge: add helper function for ssvid capability.Isaku Yamahata
helper function to add ssvid capability. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-07pci: consolidate pci_add_capability_at_offset() into pci_add_capability().Isaku Yamahata
By making pci_add_capability() the special case of pci_add_capability_at_offset() of offset = 0, consolidate pci_add_capability_at_offset() into pci_add_capability(). Cc: Stefan Weil <weil@mail.berlios.de> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-07pci_bridge: introduce pci bridge library.Isaku Yamahata
introduce pci bridge library. convert apb bridge and dec p2p bridge to use new pci bridge library. save/restore is supported as a side effect. This is also preparation for pci express root/upstream/downstream port. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-22pci_bridge: clean up: remove pci_{register, unregister}_secondary_bus()Isaku Yamahata
Remove pci_{register, unregister}_secondary_bus() by open code. They are old stype API and aren't used any more by others. So eliminate it. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-22pci_bridge: rename PCIBridge::bus -> PCIBridge::sec_bus.Isaku Yamahata
To avoid confusion of primary bus with secondary bus, rename PCIBridge::bus to PCIBridge::sec_bus. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-22pci/bridge: split out pci bridge code into pci_bridge.c from pci.cIsaku Yamahata
Move pci bridge related code into pci_bridge.c from pci.c for further enhancement. pci.c is big enough now, so split it out. No code change but exporting some accesser functions. In fact, few pci bridge functions stays in pci.c. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-19pci: move out pci internal structures, PCIBus, PCIBridge, and pci_bus_info.Isaku Yamahata
move out pci internal structures, PCIBus, PCIBridge and pci_bus_info into private header file, pci_internals.h. This is a preparation. Later pci bridge implementation will be split out form pci.c into pci_bridge.c. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-19vhost: fix miration during device startMichael S. Tsirkin
We need to know ring layout to allocate log buffer. So init rings first. Also fixes a theoretical memory-leak-on-error. https://bugzilla.redhat.com/show_bug.cgi?id=615228 Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com>
2010-07-19e1000: secrc supportMichael S. Tsirkin
Add support for secrc field. Reportedly needed by old RHEL guests. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-19e1000: fix access 4 bytes beyond buffer endMichael S. Tsirkin
We do range check for size, and get size as buffer, but copy size + 4 bytes (4 is for FCS). Let's copy size bytes but put size + 4 in length. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-12Merge branch 'master' into pciMichael S. Tsirkin
2010-07-12target-sh4: Add support for ldc & stc with sgrAlexandre Courbot
Add support for the following missing priviledged intructions: For SH4: - stc sgr, Rn - stc.l sgr, @-Rn For SH4A: - ldc Rm, sgr - ldc.l @Rm+, sgr Signed-off-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-12target-sh4: Split the LDST macro into 2 sub-macrosAlexandre Courbot
The LDST macro is used to generate ldc and stc instructions that work with a specific register. However, the SGR register only supports stc up to SH4A, which supports both stc and ldc. This patch creates two sub-macros named LD and ST that handle generating ldc and stc instructions separately, and redeclares LDST to use these sub-macro. Signed-off-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-11pci: fix bridge updateMichael S. Tsirkin
bridge config write should trigger updates on the secondary bus. never on the primary bus. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-11virtio-net: correct packet length mathMichael S. Tsirkin
We were requesting too much when checking buffer length: size already includes host header length. Further, we should not exit if we get a packet that is too long, since this might not be under control of the guest. Just drop the packet. Red Hat bz 591494 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-11pci hotplug: make pci hotplug return value to callerIsaku Yamahata
make pci hotplug callback return value to caller. And when returning error, allocated resources are freed. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-11vmware_vga: fix reset value for command registerMichael S. Tsirkin
Make init value for this register match the spec. BAR address is 0 at init, so enabling it only works by chance. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-11rtl8139: address TODOsMichael S. Tsirkin
Make rtl8139 spec compliant, fixing reset values for command register. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-11pci hotplug: make pci_device_hot_remove() staticIsaku Yamahata
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-11pcnet: address TODOsMichael S. Tsirkin
pcnet enables memory/io on init, which does not make sense as BAR values are wrong. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
2010-07-11pci: fix pci_device_resetIsaku Yamahata
Clear interrupt disable bit on reset, according to PCI spec. Fix pci_device_reset() with 64bit BAR. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-11AppleSMC device emulationAlexander Graf
Intel Macs have a chip called the "AppleSMC" which they use to control certain Apple specific parts of the hardware, like the keyboard background light. That chip is also used to store a key that Mac OS X uses to decrypt binaries. This patch adds emulation for that chip, so we're getting one step further to having Mac OS X run natively on Qemu. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11Documentation: Fix spelling bugsStefan Weil
rewuired -> required ths -> this Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11Makefile: Not every shell support {}Hidetoshi Seto
So interpret it by hand. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11Makefile: add fsdev/*.{o,d} to cleanHidetoshi Seto
There were fsdev/qemu-fsdev.{o,d} not removed at "make clean". Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11pci: set PCI multi-function bit appropriately.Isaku Yamahata
Set PCI multi-function bit according to multifunction property. PCI address, devfn ,is exported to users as addr property, so users can populate pci function(PCIDevice in qemu) at arbitrary devfn. It means each function(PCIDevice) don't know whether pci device (PCIDevice[8]) is multi function or not. So this patch allows user to set multifunction bit via property and checks whether multifunction bit is set correctly. Cc: Juan Quintela <quintela@redhat.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11pci_bridge: make pci bridge aware of pci multi function bit.Isaku Yamahata
make pci bridge aware of pci multi function property and let pci generic code to set the bit. Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11pci: set multifunction property for normal device.Isaku Yamahata
use pci_create_simple_multifunction() for normal device which sets multifunction bit. At the moment, only pc_piix.c and mips_malta.c uses multifunction devices with piix3/4 pci-isa bridge. And other boards don't populate those devices. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11pci: introduce multifunction property.Isaku Yamahata
introduce multifunction property. Also introduce new convenient device creation function which will be used later. For bisectability this patch doesn't do anything, but sets the property resulting in no functional changes. Actual changes will be introduced by later patch. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11qdev: implement qdev_prop_set_bit().Isaku Yamahata
implement qdev_prop_set_bit(). Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11pci: remove PCIDeviceInfo::header_typeIsaku Yamahata
replace PCIDeviceInfo::header_type with is_bridge as suggested by Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11pci: don't overwrite multi functio bit in pci header type.Isaku Yamahata
Don't overwrite pci header type. Otherwise, multi function bit which pci_init_header_type() sets appropriately is lost. Anyway PCI_HEADER_TYPE_NORMAL is zero, so it is unnecessary to zero which is already zero cleared. how to test: run qemu and issue info pci to see whether a device in question is normal device, not pci-to-pci bridge. This is handy because guest os isn't required. tested changes: The following files are covered by using following commands. sparc64-softmmu apb_pci.c, vga-pci.c, cmd646.c, ne2k_pci.c, sun4u.c ppc-softmmu grackle_pci.c, cmd646.c, ne2k_pci.c, vga-pci.c, macio.c ppc-softmmu -M mac99 unin_pci.c(uni-north, uni-north-agp) ppc64-softmmu pci-ohci, ne2k_pci, vga-pci, unin_pci.c(u3-agp) x86_64-softmmu acpi_piix4.c, ide/piix.c, piix_pci.c -vga vmware vmware_vga.c -watchdog i6300esb wdt_i6300esb.c -usb usb-uhci.c -sound ac97 ac97.c -nic model=rtl8139 rtl8139.c -nic model=pcnet pcnet.c -balloon virtio virtio-pci.c: untested changes: The following changes aren't tested. prep_pci.c: ppc-softmmu -M prep should cover, but core dumped. unin_pci.c(uni-north-pci): the caller is commented out. openpic.c: the caller is commented out in ppc_prep.c Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11pci: insert assert that auto-assigned-address function is single function ↵Isaku Yamahata
device. Auto-assigned-address pci function (passing devfn = -1) is always single function. This patch adds assert() to guarantee that auto-assigned-address function is always single function device at function = 0. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11pci: use PCI_DEVFN() where appropriate.Isaku Yamahata
Use PCI_DEVFN() and PCI_FUNC_MAX where appropriate. This patch make it clear that func = 0. test: The following object files with/without this patch are stripped and compared. They remains same. arm-softmmu/versatile_pci.o libhw32/ppce500_pci.o libhw32/unin_pci.o libhw64/ppce500_pci.o libhw64/unin_pci.o mips-softmmu/gt64xxx.o mips64-softmmu/gt64xxx.o mips64el-softmmu/gt64xxx.o mipsel-softmmu/gt64xxx.o Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yu Liu <yu.liu@freescale.com> Cc: Paul Brook <paul@codesourcery.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11target-mips: add loongson 2E & 2F integer instructionsAurelien Jarno
This patch adds support for loongson 2E & 2F instructions. They are the same instructions, but differ by the opcode encoding. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-07Fix warning about uninitialized variableBlue Swirl
With gcc 4.2.1-sjlj (mingw32-2) I get this warning: /src/qemu/exec.c: In function 'qemu_ram_alloc': /src/qemu/exec.c:2777: warning: 'offset' may be used uninitialized in this function Fix by initializing the variable. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-19 11:50:15 +0000